LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: evgreen@chromium.org, p.zabel@pengutronix.de, ohad@wizery.com,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, agross@kernel.org
Subject: Re: [PATCH 4/4] remoteproc: qcom: q6v5-mss: Improve readability of reset_assert
Date: Mon, 20 Jan 2020 11:36:38 -0800
Message-ID: <20200120193638.GK1511@yoga> (raw)
In-Reply-To: <20200117135130.3605-5-sibis@codeaurora.org>

On Fri 17 Jan 05:51 PST 2020, Sibi Sankar wrote:

> Define CONN_BOX_SPARE_0_EN and fixup comments to improve readability of
> Q6 modem reset_assert sequence on SC7180 SoCs.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 6a98e9029c70b..8c9cfc213d5ff 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -71,6 +71,7 @@
>  #define NAV_AXI_HALTREQ_BIT		BIT(0)
>  #define NAV_AXI_HALTACK_BIT		BIT(1)
>  #define NAV_AXI_IDLE_BIT		BIT(2)
> +#define CONN_BOX_SPARE_0_EN		BIT(0)
>  
>  #define HALT_ACK_TIMEOUT_MS		100
>  #define NAV_HALT_ACK_TIMEOUT_US		200
> @@ -415,16 +416,26 @@ static int q6v5_reset_assert(struct q6v5 *qproc)
>  		ret = reset_control_reset(qproc->mss_restart);
>  		reset_control_deassert(qproc->pdc_reset);
>  	} else if (qproc->has_halt_nav) {
> -		/* SWAR using CONN_BOX_SPARE_0 for pipeline glitch issue */
> +		/*
> +		 * SWWA for the pipeline glitch issue seen while

Is SWWA an abbreviation for SoftWare WorkAround?

> +		 * putting the Q6 modem on SC7180 into reset:
> +		 * 1 - Assert PDC reset
> +		 * 2 - Set CONN_BOX_SPARE_0_EN
> +		 * 3 - Withdraw the halt requests
> +		 * 4 - Assert MSS reset
> +		 * 5 - Deassert PDC reset
> +		 * 6 - Clear CONN_BOX_SPARE_0_EN
> +		 * 7 - Deassert MSS reset

This pretty much outlines what's written below. How about making this
something like:

/* 
 * Work around a pipeline glitch seen when putting the Q6 modem in
 * SC7180 into reset by also toggling CONN_BOX_SPARE_0_EN, while holding
 * the PDC reset.
 */


Although, it would be even better if it indicated what you mean with
"pipeline glitch"...

Regards,
Bjorn

> +		 */
>  		reset_control_assert(qproc->pdc_reset);
>  		regmap_update_bits(qproc->conn_map, qproc->conn_box,
> -				   BIT(0), BIT(0));
> +				   CONN_BOX_SPARE_0_EN, 1);
>  		regmap_update_bits(qproc->halt_nav_map, qproc->halt_nav,
>  				   NAV_AXI_HALTREQ_BIT, 0);
>  		reset_control_assert(qproc->mss_restart);
>  		reset_control_deassert(qproc->pdc_reset);
>  		regmap_update_bits(qproc->conn_map, qproc->conn_box,
> -				   BIT(0), 0);
> +				   CONN_BOX_SPARE_0_EN, 0);
>  		ret = reset_control_deassert(qproc->mss_restart);
>  	} else {
>  		ret = reset_control_assert(qproc->mss_restart);
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

  reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-17 13:51 [PATCH 0/4] Improve general readability of MSS on SC7180 Sibi Sankar
2020-01-17 13:51 ` [PATCH 1/4] remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout Sibi Sankar
2020-01-17 14:19   ` Philipp Zabel
2020-01-20 19:24   ` Bjorn Andersson
2020-01-22  6:18     ` Sibi Sankar
2020-01-17 13:51 ` [PATCH 2/4] remoteproc: qcom: q6v5-mss: Improve readability across clk handling Sibi Sankar
2020-01-21 19:22   ` Evan Green
2020-01-22  6:38     ` Sibi Sankar
2020-01-17 13:51 ` [PATCH 3/4] remoteproc: qcom: q6v5-mss: Rename boot status timeout Sibi Sankar
2020-01-21 19:22   ` Evan Green
2020-01-17 13:51 ` [PATCH 4/4] remoteproc: qcom: q6v5-mss: Improve readability of reset_assert Sibi Sankar
2020-01-20 19:36   ` Bjorn Andersson [this message]
2020-01-20 19:37 ` [PATCH 0/4] Improve general readability of MSS on SC7180 Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200120193638.GK1511@yoga \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=p.zabel@pengutronix.de \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git