From: Luca Ceresoli <luca@lucaceresoli.net>
To: linux-i2c@vger.kernel.org, linux-doc@vger.kernel.org
Cc: Luca Ceresoli <luca@lucaceresoli.net>,
Wolfram Sang <wsa@the-dreams.de>, Jean Delvare <jdelvare@suse.de>,
Peter Rosin <peda@axentia.se>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 27/28] docs: i2c: i2c-protocol: use same wording as smbus-protocol
Date: Thu, 23 Jan 2020 15:56:25 +0100 [thread overview]
Message-ID: <20200123145626.8102-14-luca@lucaceresoli.net> (raw)
In-Reply-To: <20200123145626.8102-1-luca@lucaceresoli.net>
In smbus-protocol.rst we use the text "Implemented by" for the same meaning
as "This corresponds to". Change everything to "Implemented by" for
coherency.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Jean Delvare <jdelvare@suse.de>
---
This patch is new in v2.
---
Documentation/i2c/i2c-protocol.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 6aafc3880bce..b2092f8f815d 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -28,7 +28,7 @@ Count (8 bits) A data byte containing the length of a block operation.
Simple send transaction
=======================
-This corresponds to i2c_master_send()::
+Implemented by i2c_master_send()::
S Addr Wr [A] Data [A] Data [A] ... [A] Data [A] P
@@ -36,7 +36,7 @@ This corresponds to i2c_master_send()::
Simple receive transaction
==========================
-This corresponds to i2c_master_recv()::
+Implemented by i2c_master_recv()::
S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
@@ -44,7 +44,7 @@ This corresponds to i2c_master_recv()::
Combined transactions
=====================
-This corresponds to i2c_transfer().
+Implemented by i2c_transfer().
They are just like the above transactions, but instead of a stop
condition P a start condition S is sent and the transaction continues.
--
2.25.0
next prev parent reply other threads:[~2020-01-23 14:58 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-23 13:50 [PATCH v2 00/28] docs: i2c: rework I2C documentation, part I Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 01/28] docs: i2c: sort index logically Luca Ceresoli
2020-01-24 12:35 ` Jean Delvare
2020-01-29 12:22 ` Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 02/28] docs: i2c: summary: extend introduction Luca Ceresoli
2020-01-24 13:24 ` Jean Delvare
2020-01-23 13:50 ` [PATCH v2 03/28] docs: i2c: summary: rewrite the "terminology" section Luca Ceresoli
2020-01-24 13:28 ` Jean Delvare
2020-01-23 13:50 ` [PATCH v2 04/28] docs: i2c: call it "I2C" consistently Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 05/28] docs: i2c: fix typo Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 06/28] docs: i2c: replace "I2C-transfer" -> "I2C transfer" consistently Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 07/28] docs: i2c: i2c-protocol: fix kernel-doc function syntax Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 08/28] docs: i2c: i2c-protocol: properly name start and stop conditions Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 09/28] docs: i2c: i2c-protocol: remove unneeded colons from table Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 10/28] docs: i2c: i2c-protocol: use proper names for ACK and NACK Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 11/28] docs: i2c: smbus: fix link syntax Luca Ceresoli
2020-01-24 14:57 ` Jean Delvare
2020-01-23 13:50 ` [PATCH v2 12/28] docs: i2c: smbus-protocol: properly name start and stop conditions Luca Ceresoli
2020-01-23 13:50 ` [PATCH v2 13/28] docs: i2c: smbus-protocol: remove unneeded colons from table Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 14/28] docs: i2c: smbus-protocol: use proper names for ACK and NACK Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 15/28] docs: i2c: smbus-protocol: enable kernel-doc function syntax Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 16/28] docs: i2c: smbus-protocol: fix " Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 17/28] docs: i2c: smbus-protocol: fix typo Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 18/28] docs: i2c: smbus-protocol: fix punctuation Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 19/28] docs: i2c: smbus-protocol: improve I2C Block transactions description Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 20/28] docs: i2c: instantiating-devices: fix internal hyperlink Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 21/28] docs: i2c: instantiating-devices: rearrange static instatiation Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 22/28] docs: i2c: instantiating-devices: use monospace for sysfs attributes Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 23/28] docs: i2c: old-module-parameters: fix internal hyperlink Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 24/28] docs: i2c: old-module-parameters: clarify this is for obsolete kernels Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 25/28] docs: i2c: old-module-parameters: use monospace instead of "" Luca Ceresoli
2020-01-23 14:56 ` [PATCH v2 26/28] docs: i2c: rename sections so the overall picture is clearer Luca Ceresoli
2020-01-23 14:56 ` Luca Ceresoli [this message]
2020-01-24 15:59 ` [PATCH v2 27/28] docs: i2c: i2c-protocol: use same wording as smbus-protocol Jean Delvare
2020-01-23 14:56 ` [PATCH v2 28/28] docs: i2c: writing-clients: properly name the stop condition Luca Ceresoli
2020-01-24 16:01 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200123145626.8102-14-luca@lucaceresoli.net \
--to=luca@lucaceresoli.net \
--cc=jdelvare@suse.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).