From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-4.0 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, UNWANTED_LANGUAGE_BODY autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 97028C35242 for ; Fri, 24 Jan 2020 08:24:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 60F802075D for ; Fri, 24 Jan 2020 08:24:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729638AbgAXIYd (ORCPT ); Fri, 24 Jan 2020 03:24:33 -0500 Received: from relay7-d.mail.gandi.net ([217.70.183.200]:35837 "EHLO relay7-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725843AbgAXIYd (ORCPT ); Fri, 24 Jan 2020 03:24:33 -0500 X-Originating-IP: 88.190.179.123 Received: from localhost (unknown [88.190.179.123]) (Authenticated sender: repk@triplefau.lt) by relay7-d.mail.gandi.net (Postfix) with ESMTPSA id DD71920004; Fri, 24 Jan 2020 08:24:28 +0000 (UTC) Date: Fri, 24 Jan 2020 09:32:53 +0100 From: Remi Pommarel To: Kishon Vijay Abraham I , Yue Wang , Kevin Hilman , Lorenzo Pieralisi , Bjorn Helgaas , Neil Armstrong , Martin Blumenstingl , Rob Herring Cc: Jerome Brunet , linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-pci@vger.kernel.org Subject: Re: [PATCH v6 5/7] phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver Message-ID: <20200124083253.GV1803@voidbox> References: <20200123232943.10229-1-repk@triplefau.lt> <20200123232943.10229-6-repk@triplefau.lt> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20200123232943.10229-6-repk@triplefau.lt> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add missing Reviewed/Acked-by from v5. On Fri, Jan 24, 2020 at 12:29:41AM +0100, Remi Pommarel wrote: > This adds support for the MIPI analog PHY which is also used for PCIE > found in the Amlogic AXG SoC Family. > > MIPI or PCIE selection is done by the #phy-cells, making the mode > static and exclusive. > > For now only PCIE fonctionality is supported. > > This PHY will be used to replace the mipi_enable clock gating logic > which was mistakenly added in the clock subsystem. This also activate > a non documented band gap bit in those registers that allows reliable > PCIE clock signal generation on AXG platforms. Acked-by: Jerome Brunet > > Signed-off-by: Remi Pommarel > --- > drivers/phy/amlogic/Kconfig | 11 + > drivers/phy/amlogic/Makefile | 11 +- > .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 188 ++++++++++++++++++ > 3 files changed, 205 insertions(+), 5 deletions(-) > create mode 100644 drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c > > diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig > index af774ac2b934..8c9cf2403591 100644 > --- a/drivers/phy/amlogic/Kconfig > +++ b/drivers/phy/amlogic/Kconfig > @@ -59,3 +59,14 @@ config PHY_MESON_G12A_USB3_PCIE > Enable this to support the Meson USB3 + PCIE Combo PHY found > in Meson G12A SoCs. > If unsure, say N. > + > +config PHY_MESON_AXG_MIPI_PCIE_ANALOG > + tristate "Meson AXG MIPI + PCIE analog PHY driver" > + default ARCH_MESON > + depends on OF && (ARCH_MESON || COMPILE_TEST) > + select GENERIC_PHY > + select REGMAP_MMIO > + help > + Enable this to support the Meson MIPI + PCIE analog PHY > + found in Meson AXG SoCs. > + If unsure, say N. > diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile > index 11d1c42ac2be..0aecf92d796a 100644 > --- a/drivers/phy/amlogic/Makefile > +++ b/drivers/phy/amlogic/Makefile > @@ -1,6 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0-only > -obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o > -obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o > -obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o > -obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o > -obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o > +obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o > +obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o > +obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o > +obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o > +obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o > +obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o > diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c > new file mode 100644 > index 000000000000..1431cbf885e1 > --- /dev/null > +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c > @@ -0,0 +1,188 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Amlogic AXG MIPI + PCIE analog PHY driver > + * > + * Copyright (C) 2019 Remi Pommarel > + */ > +#include > +#include > +#include > +#include > +#include > + > +#define HHI_MIPI_CNTL0 0x00 > +#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28) > +#define HHI_MIPI_CNTL0_ENABLE BIT(29) > +#define HHI_MIPI_CNTL0_BANDGAP BIT(26) > +#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12) > +#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3) > + > +#define HHI_MIPI_CNTL1 0x01 > +#define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12) > +#define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4) > +#define HHI_MIPI_CNTL1_LP_RESISTER BIT(3) > +#define HHI_MIPI_CNTL1_INPUT_SETTING BIT(2) > +#define HHI_MIPI_CNTL1_INPUT_SEL BIT(1) > +#define HHI_MIPI_CNTL1_PRBS7_EN BIT(0) > + > +#define HHI_MIPI_CNTL2 0x02 > +#define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25) > +#define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19) > +#define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18) > +#define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17) > +#define HHI_MIPI_CNTL2_LPULPS_EN BIT(16) > +#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n)) > +#define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1) > + > +struct phy_axg_mipi_pcie_analog_priv { > + struct phy *phy; > + unsigned int mode; > + struct regmap *regmap; > +}; > + > +static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = { > + .reg_bits = 8, > + .val_bits = 32, > + .reg_stride = 4, > + .max_register = HHI_MIPI_CNTL2, > +}; > + > +static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy) > +{ > + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); > + > + /* MIPI not supported yet */ > + if (priv->mode != PHY_TYPE_PCIE) > + return -EINVAL; > + > + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, > + HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP); > + > + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, > + HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE); > + return 0; > +} > + > +static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy) > +{ > + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); > + > + /* MIPI not supported yet */ > + if (priv->mode != PHY_TYPE_PCIE) > + return -EINVAL; > + > + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, > + HHI_MIPI_CNTL0_BANDGAP, 0); > + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, > + HHI_MIPI_CNTL0_ENABLE, 0); > + return 0; > +} > + > +static int phy_axg_mipi_pcie_analog_init(struct phy *phy) > +{ > + return 0; > +} > + > +static int phy_axg_mipi_pcie_analog_exit(struct phy *phy) > +{ > + return 0; > +} > + > +static const struct phy_ops phy_axg_mipi_pcie_analog_ops = { > + .init = phy_axg_mipi_pcie_analog_init, > + .exit = phy_axg_mipi_pcie_analog_exit, > + .power_on = phy_axg_mipi_pcie_analog_power_on, > + .power_off = phy_axg_mipi_pcie_analog_power_off, > + .owner = THIS_MODULE, > +}; > + > +static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev); > + unsigned int mode; > + > + if (args->args_count != 1) { > + dev_err(dev, "invalid number of arguments\n"); > + return ERR_PTR(-EINVAL); > + } > + > + mode = args->args[0]; > + > + /* MIPI mode is not supported yet */ > + if (mode != PHY_TYPE_PCIE) { > + dev_err(dev, "invalid phy mode select argument\n"); > + return ERR_PTR(-EINVAL); > + } > + > + priv->mode = mode; > + return priv->phy; > +} > + > +static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) > +{ > + struct phy_provider *phy; > + struct device *dev = &pdev->dev; > + struct phy_axg_mipi_pcie_analog_priv *priv; > + struct device_node *np = dev->of_node; > + struct regmap *map; > + struct resource *res; > + void __iomem *base; > + int ret; > + > + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + base = devm_ioremap_resource(dev, res); > + if (IS_ERR(base)) { > + dev_err(dev, "failed to get regmap base\n"); > + return PTR_ERR(base); > + } > + > + map = devm_regmap_init_mmio(dev, base, > + &phy_axg_mipi_pcie_analog_regmap_conf); > + if (IS_ERR(map)) { > + dev_err(dev, "failed to get HHI regmap\n"); > + return PTR_ERR(map); > + } > + priv->regmap = map; > + > + priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops); > + if (IS_ERR(priv->phy)) { > + ret = PTR_ERR(priv->phy); > + if (ret != -EPROBE_DEFER) > + dev_err(dev, "failed to create PHY\n"); > + return ret; > + } > + > + phy_set_drvdata(priv->phy, priv); > + dev_set_drvdata(dev, priv); > + > + phy = devm_of_phy_provider_register(dev, > + phy_axg_mipi_pcie_analog_xlate); > + > + return PTR_ERR_OR_ZERO(phy); > +} > + > +static const struct of_device_id phy_axg_mipi_pcie_analog_of_match[] = { > + { > + .compatible = "amlogic,axg-mipi-pcie-analog-phy", > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, phy_axg_mipi_pcie_analog_of_match); > + > +static struct platform_driver phy_axg_mipi_pcie_analog_driver = { > + .probe = phy_axg_mipi_pcie_analog_probe, > + .driver = { > + .name = "phy-axg-mipi-pcie-analog", > + .of_match_table = phy_axg_mipi_pcie_analog_of_match, > + }, > +}; > +module_platform_driver(phy_axg_mipi_pcie_analog_driver); > + > +MODULE_AUTHOR("Remi Pommarel "); > +MODULE_DESCRIPTION("Amlogic AXG MIPI + PCIE analog PHY driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.24.1 >