From: Stefan Agner <stefan@agner.ch>
To: shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: stefan@agner.ch, philippe.schenker@toradex.com,
marcel.ziswiler@toradex.com, max.krummenacher@toradex.com,
robh+dt@kernel.org, mark.rutland@arm.com, kernel@pengutronix.de,
festevam@gmail.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Stefan Agner <stefan.agner@toradex.com>
Subject: [PATCH] ARM: dts: imx7-colibri: add gpio-line-names
Date: Wed, 29 Jan 2020 22:53:36 +0100 [thread overview]
Message-ID: <20200129215336.417431-1-stefan@agner.ch> (raw)
From: Stefan Agner <stefan.agner@toradex.com>
Add Colibri SODIMM numbers as GPIO line names on module level. The GPIO
lines with a name are all available on the SODIMM edge connector of the
Colibri iMX7 module and therefore a customer might use it as a GPIO. The
Toradex Evaluation Board has the SODIMM numbers printed on the silk-
screen. This allows a customer to quickly control a GPIO on a pin-header
by using the name printed next to it.
Putting the GPIO line name on module level makes sure that a customer
gets a reasonable default. If more meaningful names are available on a
custom carrier board, the user can overwrite the line names in a carrier
board level device tree.
The eMMC based modules share all GPIO names except two GPIOs on bank 6
which are not available on the raw NAND devices. Hence overwrite GPIO
line names of bank 6 in the eMMC specific device tree file.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 178 ++++++++++++++++++++++
arch/arm/boot/dts/imx7d-colibri-emmc.dtsi | 26 ++++
2 files changed, 204 insertions(+)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index d05be3f0e2a7..10d8880e8d13 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -130,6 +130,184 @@ &flexcan2 {
status = "disabled";
};
+&gpio1 {
+ gpio-line-names = "SODIMM_43",
+ "SODIMM_45",
+ "SODIMM_135",
+ "SODIMM_22",
+ "",
+ "",
+ "SODIMM_37",
+ "SODIMM_29",
+ "SODIMM_59",
+ "SODIMM_28",
+ "SODIMM_30",
+ "SODIMM_67",
+ "",
+ "",
+ "SODIMM_188",
+ "SODIMM_178";
+};
+
+&gpio2 {
+ gpio-line-names = "SODIMM_111",
+ "SODIMM_113",
+ "SODIMM_115",
+ "SODIMM_117",
+ "SODIMM_119",
+ "SODIMM_121",
+ "SODIMM_123",
+ "SODIMM_125",
+ "SODIMM_91",
+ "SODIMM_89",
+ "SODIMM_105",
+ "SODIMM_152",
+ "SODIMM_150",
+ "SODIMM_95",
+ "SODIMM_126",
+ "SODIMM_107",
+ "SODIMM_114",
+ "SODIMM_116",
+ "SODIMM_118",
+ "SODIMM_120",
+ "SODIMM_122",
+ "SODIMM_124",
+ "SODIMM_127",
+ "SODIMM_130",
+ "SODIMM_132",
+ "SODIMM_134",
+ "SODIMM_133",
+ "SODIMM_104",
+ "SODIMM_106",
+ "SODIMM_110",
+ "SODIMM_112",
+ "SODIMM_128";
+};
+
+&gpio3 {
+ gpio-line-names = "SODIMM_56",
+ "SODIMM_44",
+ "SODIMM_68",
+ "SODIMM_82",
+ "SODIMM_93",
+ "SODIMM_76",
+ "SODIMM_70",
+ "SODIMM_60",
+ "SODIMM_58",
+ "SODIMM_78",
+ "SODIMM_72",
+ "SODIMM_80",
+ "SODIMM_46",
+ "SODIMM_62",
+ "SODIMM_48",
+ "SODIMM_74",
+ "SODIMM_50",
+ "SODIMM_52",
+ "SODIMM_54",
+ "SODIMM_66",
+ "SODIMM_64",
+ "SODIMM_57",
+ "SODIMM_61",
+ "SODIMM_136",
+ "SODIMM_138",
+ "SODIMM_140",
+ "SODIMM_142",
+ "SODIMM_144",
+ "SODIMM_146";
+};
+
+&gpio4 {
+ gpio-line-names = "SODIMM_35",
+ "SODIMM_33",
+ "SODIMM_38",
+ "SODIMM_36",
+ "SODIMM_21",
+ "SODIMM_19",
+ "SODIMM_131",
+ "SODIMM_129",
+ "SODIMM_90",
+ "SODIMM_92",
+ "SODIMM_88",
+ "SODIMM_86",
+ "SODIMM_81",
+ "SODIMM_94",
+ "SODIMM_96",
+ "SODIMM_75",
+ "SODIMM_101",
+ "SODIMM_103",
+ "SODIMM_79",
+ "SODIMM_97",
+ "SODIMM_67",
+ "SODIMM_59",
+ "SODIMM_85",
+ "SODIMM_65";
+};
+
+&gpio5 {
+ gpio-line-names = "SODIMM_69",
+ "SODIMM_71",
+ "SODIMM_73",
+ "SODIMM_47",
+ "SODIMM_190",
+ "SODIMM_192",
+ "SODIMM_49",
+ "SODIMM_51",
+ "SODIMM_53",
+ "",
+ "",
+ "SODIMM_98",
+ "SODIMM_184",
+ "SODIMM_186",
+ "SODIMM_23",
+ "SODIMM_31",
+ "SODIMM_100",
+ "SODIMM_102";
+};
+
+&gpio6 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_169",
+ "",
+ "",
+ "",
+ "SODIMM_77",
+ "SODIMM_24",
+ "",
+ "SODIMM_25",
+ "SODIMM_27",
+ "SODIMM_32",
+ "SODIMM_34";
+};
+
+&gpio7 {
+ gpio-line-names = "",
+ "",
+ "SODIMM_63",
+ "SODIMM_55",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_196",
+ "SODIMM_194",
+ "",
+ "SODIMM_99",
+ "",
+ "",
+ "SODIMM_137";
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index 898f4b8d7421..af39e5370fa1 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -13,6 +13,32 @@ memory@80000000 {
};
};
+&gpio6 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_169",
+ "SODIMM_157",
+ "",
+ "SODIMM_163",
+ "SODIMM_77",
+ "SODIMM_24",
+ "",
+ "SODIMM_25",
+ "SODIMM_27",
+ "SODIMM_32",
+ "SODIMM_34";
+};
+
&usbotg2 {
dr_mode = "host";
};
--
2.25.0
next reply other threads:[~2020-01-29 21:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 21:53 Stefan Agner [this message]
2020-01-30 11:35 ` [PATCH] ARM: dts: imx7-colibri: add gpio-line-names Philippe Schenker
2020-02-14 3:10 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200129215336.417431-1-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan.agner@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).