linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
To: gustavo@embeddedor.com, gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] hpet: Fix struct_size() in kzalloc()
Date: Thu, 30 Jan 2020 13:50:38 +0900	[thread overview]
Message-ID: <202001300450.00U4ocvS083098@www262.sakura.ne.jp> (raw)

Gustavo A. R. Silva wrote:
> > Are you sure the allocation size is the same again?  Much like the
> > n_hdlc patch was, I think you need to adjust the variable size here.
> > Maybe, it's a bit of a pain to figure out at a quick glance, I just want
> > to make sure you at least do look at that :)
> > 
> 
> Yep. The allocation thing was already handled almost a year ago by the
> following patch, and it didn't require to increase the size at that time:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=401c9bd10beef4b030eb9e34d16b5341dc6c683b
> 

Nope. KASAN splat began because allocation size calculation is wrong.

[    8.319936] ==================================================================
[    8.319936] BUG: KASAN: slab-out-of-bounds in hpet_alloc+0x41d/0xdf0
[    8.319936] Write of size 4 at addr ffff8881e6156928 by task swapper/0/1

[    8.319936] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0+ #248
[    8.319936] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[    8.319936] Call Trace:
[    8.319936]  dump_stack+0x163/0x1d5
[    8.319936]  print_address_description.constprop.6+0x1e8/0x3a0
[    8.319936]  ? hpet_alloc+0x41d/0xdf0
[    8.319936]  __kasan_report+0x143/0x1a0
[    8.319936]  ? hpet_alloc+0x41d/0xdf0
[    8.319936]  ? hpet_alloc+0x41d/0xdf0
[    8.319936]  kasan_report+0x12/0x20
[    8.319936]  __asan_report_store4_noabort+0x17/0x20
[    8.319936]  hpet_alloc+0x41d/0xdf0
[    8.319936]  hpet_reserve_platform_timers+0x1eb/0x22f
[    8.319936]  ? hpet_setup+0xd1/0xd1
[    8.319936]  hpet_late_init+0x2f2/0x386
[    8.319936]  ? setup_unknown_nmi_panic+0x15/0x15
[    8.319936]  ? hpet_enable+0x6fa/0x6fa
[    8.319936]  do_one_initcall+0xf6/0x6c0
[    8.319936]  ? perf_trace_initcall_level+0x3f0/0x3f0
[    8.319936]  ? rcu_read_lock_sched_held+0x9c/0xd0
[    8.319936]  ? rcu_read_lock_bh_held+0xb0/0xb0
[    8.319936]  ? __kasan_check_write+0x14/0x20
[    8.319936]  ? __kasan_check_read+0x11/0x20
[    8.319936]  kernel_init_freeable+0x4b0/0x531
[    8.319936]  ? rest_init+0x2f0/0x2f0
[    8.319936]  kernel_init+0x13/0x180
[    8.319936]  ? rest_init+0x2f0/0x2f0
[    8.319936]  ret_from_fork+0x24/0x30

[    8.319936] Allocated by task 1:
[    8.319936]  save_stack+0x21/0x80
[    8.319936]  __kasan_kmalloc.constprop.7+0xab/0xe0
[    8.319936]  kasan_kmalloc+0x9/0x10
[    8.319936]  __kmalloc+0x17c/0x810
[    8.319936]  hpet_alloc+0x1b4/0xdf0
[    8.319936]  hpet_reserve_platform_timers+0x1eb/0x22f
[    8.319936]  hpet_late_init+0x2f2/0x386
[    8.319936]  do_one_initcall+0xf6/0x6c0
[    8.319936]  kernel_init_freeable+0x4b0/0x531
[    8.319936]  kernel_init+0x13/0x180
[    8.319936]  ret_from_fork+0x24/0x30

[    8.319936] Freed by task 0:
[    8.319936] (stack is not available)

[    8.319936] The buggy address belongs to the object at ffff8881e6156000
                which belongs to the cache kmalloc-4k of size 4096
[    8.319936] The buggy address is located 2344 bytes inside of
                4096-byte region [ffff8881e6156000, ffff8881e6157000)
[    8.319936] The buggy address belongs to the page:
[    8.319936] page:ffffea0007985580 refcount:1 mapcount:0 mapping:ffff8881f3802000 index:0x0 compound_mapcount: 0
[    8.319936] raw: 02fffc0000010200 ffffea0007985408 ffff8881f3801a48 ffff8881f3802000
[    8.319936] raw: 0000000000000000 ffff8881e6156000 0000000100000001 0000000000000000
[    8.319936] page dumped because: kasan: bad access detected

[    8.319936] Memory state around the buggy address:
[    8.320001]  ffff8881e6156800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    8.320096]  ffff8881e6156880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
[    8.320190] >ffff8881e6156900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[    8.320284]                                   ^
[    8.320349]  ffff8881e6156980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[    8.320444]  ffff8881e6156a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[    8.320537] ==================================================================
[    8.320631] Disabling lock debugging due to kernel taint

We need a patch shown below.



From 2607c3e719bb526e976a88ea8a2f3475688eadb5 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Thu, 30 Jan 2020 13:43:23 +0900
Subject: [PATCH] hpet: Fix struct_size() in kzalloc()

Changing "struct hpet_dev hp_dev[1]" to "struct hpet_dev hp_dev[]"
reduces structure size by sizeof(struct hpet_dev) bytes. We need to
compensate it at struct_size().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 987f028b8637cfa7 ("char: hpet: Use flexible-array member")
---
 drivers/char/hpet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index aed2c45f7968..ed3b7dab678d 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -855,7 +855,7 @@ int hpet_alloc(struct hpet_data *hdp)
 		return 0;
 	}
 
-	hpetp = kzalloc(struct_size(hpetp, hp_dev, hdp->hd_nirqs - 1),
+	hpetp = kzalloc(struct_size(hpetp, hp_dev, hdp->hd_nirqs),
 			GFP_KERNEL);
 
 	if (!hpetp)
-- 
2.11.0

             reply	other threads:[~2020-01-30  4:53 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30  4:50 Tetsuo Handa [this message]
2020-01-30  5:26 ` [PATCH] hpet: Fix struct_size() in kzalloc() Eric Biggers
2020-01-30  5:56   ` Greg KH
2020-01-30 10:09     ` David Laight
2020-01-30 10:37       ` David Laight

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=202001300450.00U4ocvS083098@www262.sakura.ne.jp \
    --to=penguin-kernel@i-love.sakura.ne.jp \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavo@embeddedor.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).