From: Wambui Karuga <wambui.karugax@gmail.com>
To: jani.nikula@linux.intel.com, joonas.lahtinen@linux.intel.com,
rodrigo.vivi@intel.com, airlied@linux.ie, daniel@ffwll.ch
Cc: sean@poorly.run, intel-gfx@lists.freedesktop.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 01/12] drm/i915/vlv_dsi_pll: conversion to struct drm_device logging macros.
Date: Thu, 30 Jan 2020 11:32:18 +0300 [thread overview]
Message-ID: <20200130083229.12889-2-wambui.karugax@gmail.com> (raw)
In-Reply-To: <20200130083229.12889-1-wambui.karugax@gmail.com>
Convert the printk based logging macros to the new struct drm_device
based logging macros in i915/display/vlv_dsi_pll.c using the following
coccinelle script that matches based on the existence of a drm_i915_private
device:
@@
identifier fn, T;
@@
fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
@@
identifier fn, T;
@@
fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}
Checkpatch warnings were fixed manually.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
---
drivers/gpu/drm/i915/display/vlv_dsi_pll.c | 47 ++++++++++++----------
1 file changed, 26 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi_pll.c b/drivers/gpu/drm/i915/display/vlv_dsi_pll.c
index 8a68a86e2dc8..d0a514301575 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi_pll.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi_pll.c
@@ -64,7 +64,7 @@ static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
/* target_dsi_clk is expected in kHz */
if (target_dsi_clk < 300000 || target_dsi_clk > 1150000) {
- DRM_ERROR("DSI CLK Out of Range\n");
+ drm_err(&dev_priv->drm, "DSI CLK Out of Range\n");
return -ECHRNG;
}
@@ -126,7 +126,7 @@ int vlv_dsi_pll_compute(struct intel_encoder *encoder,
ret = dsi_calc_mnp(dev_priv, config, dsi_clk);
if (ret) {
- DRM_DEBUG_KMS("dsi_calc_mnp failed\n");
+ drm_dbg_kms(&dev_priv->drm, "dsi_calc_mnp failed\n");
return ret;
}
@@ -138,8 +138,8 @@ int vlv_dsi_pll_compute(struct intel_encoder *encoder,
config->dsi_pll.ctrl |= DSI_PLL_VCO_EN;
- DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n",
- config->dsi_pll.div, config->dsi_pll.ctrl);
+ drm_dbg_kms(&dev_priv->drm, "dsi pll div %08x, ctrl %08x\n",
+ config->dsi_pll.div, config->dsi_pll.ctrl);
return 0;
}
@@ -149,7 +149,7 @@ void vlv_dsi_pll_enable(struct intel_encoder *encoder,
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(&dev_priv->drm, "\n");
vlv_cck_get(dev_priv);
@@ -169,12 +169,12 @@ void vlv_dsi_pll_enable(struct intel_encoder *encoder,
DSI_PLL_LOCK, 20)) {
vlv_cck_put(dev_priv);
- DRM_ERROR("DSI PLL lock failed\n");
+ drm_err(&dev_priv->drm, "DSI PLL lock failed\n");
return;
}
vlv_cck_put(dev_priv);
- DRM_DEBUG_KMS("DSI PLL locked\n");
+ drm_dbg_kms(&dev_priv->drm, "DSI PLL locked\n");
}
void vlv_dsi_pll_disable(struct intel_encoder *encoder)
@@ -182,7 +182,7 @@ void vlv_dsi_pll_disable(struct intel_encoder *encoder)
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 tmp;
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(&dev_priv->drm, "\n");
vlv_cck_get(dev_priv);
@@ -218,12 +218,14 @@ bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv)
val = intel_de_read(dev_priv, BXT_DSI_PLL_CTL);
if (IS_GEMINILAKE(dev_priv)) {
if (!(val & BXT_DSIA_16X_MASK)) {
- DRM_DEBUG_DRIVER("Invalid PLL divider (%08x)\n", val);
+ drm_dbg(&dev_priv->drm,
+ "Invalid PLL divider (%08x)\n", val);
enabled = false;
}
} else {
if (!(val & BXT_DSIA_16X_MASK) || !(val & BXT_DSIC_16X_MASK)) {
- DRM_DEBUG_DRIVER("Invalid PLL divider (%08x)\n", val);
+ drm_dbg(&dev_priv->drm,
+ "Invalid PLL divider (%08x)\n", val);
enabled = false;
}
}
@@ -236,7 +238,7 @@ void bxt_dsi_pll_disable(struct intel_encoder *encoder)
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 val;
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(&dev_priv->drm, "\n");
val = intel_de_read(dev_priv, BXT_DSI_PLL_ENABLE);
val &= ~BXT_DSI_PLL_DO_ENABLE;
@@ -248,7 +250,8 @@ void bxt_dsi_pll_disable(struct intel_encoder *encoder)
*/
if (intel_de_wait_for_clear(dev_priv, BXT_DSI_PLL_ENABLE,
BXT_DSI_PLL_LOCKED, 1))
- DRM_ERROR("Timeout waiting for PLL lock deassertion\n");
+ drm_err(&dev_priv->drm,
+ "Timeout waiting for PLL lock deassertion\n");
}
u32 vlv_dsi_get_pclk(struct intel_encoder *encoder,
@@ -263,7 +266,7 @@ u32 vlv_dsi_get_pclk(struct intel_encoder *encoder,
int refclk = IS_CHERRYVIEW(dev_priv) ? 100000 : 25000;
int i;
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(&dev_priv->drm, "\n");
vlv_cck_get(dev_priv);
pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
@@ -292,7 +295,7 @@ u32 vlv_dsi_get_pclk(struct intel_encoder *encoder,
p--;
if (!p) {
- DRM_ERROR("wrong P1 divisor\n");
+ drm_err(&dev_priv->drm, "wrong P1 divisor\n");
return 0;
}
@@ -302,7 +305,7 @@ u32 vlv_dsi_get_pclk(struct intel_encoder *encoder,
}
if (i == ARRAY_SIZE(lfsr_converts)) {
- DRM_ERROR("wrong m_seed programmed\n");
+ drm_err(&dev_priv->drm, "wrong m_seed programmed\n");
return 0;
}
@@ -333,7 +336,7 @@ u32 bxt_dsi_get_pclk(struct intel_encoder *encoder,
pclk = DIV_ROUND_CLOSEST(dsi_clk * intel_dsi->lane_count, bpp);
- DRM_DEBUG_DRIVER("Calculated pclk=%u\n", pclk);
+ drm_dbg(&dev_priv->drm, "Calculated pclk=%u\n", pclk);
return pclk;
}
@@ -479,10 +482,11 @@ int bxt_dsi_pll_compute(struct intel_encoder *encoder,
}
if (dsi_ratio < dsi_ratio_min || dsi_ratio > dsi_ratio_max) {
- DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n");
+ drm_err(&dev_priv->drm,
+ "Cant get a suitable ratio from DSI PLL ratios\n");
return -ECHRNG;
} else
- DRM_DEBUG_KMS("DSI PLL calculation is Done!!\n");
+ drm_dbg_kms(&dev_priv->drm, "DSI PLL calculation is Done!!\n");
/*
* Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
@@ -508,7 +512,7 @@ void bxt_dsi_pll_enable(struct intel_encoder *encoder,
enum port port;
u32 val;
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(&dev_priv->drm, "\n");
/* Configure PLL vales */
intel_de_write(dev_priv, BXT_DSI_PLL_CTL, config->dsi_pll.ctrl);
@@ -530,11 +534,12 @@ void bxt_dsi_pll_enable(struct intel_encoder *encoder,
/* Timeout and fail if PLL not locked */
if (intel_de_wait_for_set(dev_priv, BXT_DSI_PLL_ENABLE,
BXT_DSI_PLL_LOCKED, 1)) {
- DRM_ERROR("Timed out waiting for DSI PLL to lock\n");
+ drm_err(&dev_priv->drm,
+ "Timed out waiting for DSI PLL to lock\n");
return;
}
- DRM_DEBUG_KMS("DSI PLL locked\n");
+ drm_dbg_kms(&dev_priv->drm, "DSI PLL locked\n");
}
void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
--
2.25.0
next prev parent reply other threads:[~2020-01-30 8:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-30 8:32 [PATCH 00/12] drm/i915/display: conversion to drm_device based logging macros Wambui Karuga
2020-01-30 8:32 ` Wambui Karuga [this message]
2020-01-30 8:32 ` [PATCH 02/12] drm/i915/vlv_dsi: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 03/12] drm/i915/vga: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 04/12] drm/i915/vdsc: convert to struct " Wambui Karuga
2020-01-30 8:32 ` [PATCH 05/12] drm/i915/tv: automatic conversion to " Wambui Karuga
2020-01-30 8:32 ` [PATCH 06/12] drm/i915/tc: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 07/12] drm/i915/sprite: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 08/12] drm/i915/sdvo: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 09/12] drm/i915/quirks: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 10/12] drm/i915/psr: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 11/12] drm/i915/pipe_crc: " Wambui Karuga
2020-01-30 8:32 ` [PATCH 12/12] drm/i915/panel: " Wambui Karuga
2020-02-04 9:28 ` [PATCH 00/12] drm/i915/display: " Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200130083229.12889-2-wambui.karugax@gmail.com \
--to=wambui.karugax@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=joonas.lahtinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).