From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6DC8DC352A2 for ; Fri, 7 Feb 2020 09:51:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2EC6020726 for ; Fri, 7 Feb 2020 09:51:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="VSKBsYJQ" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727018AbgBGJvl (ORCPT ); Fri, 7 Feb 2020 04:51:41 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:61342 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726626AbgBGJvk (ORCPT ); Fri, 7 Feb 2020 04:51:40 -0500 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 0179nHND028269; Fri, 7 Feb 2020 10:51:24 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=ncTQcBiZB3lDfT3+MQyNfHGDj3U3Got6zyGHm+sjTWY=; b=VSKBsYJQbYBzDnk/MvYyClQvIpmsbrivnBh0SgIa7hLBwgLJX3FdXCEM4p3XlLQ6axv/ Cz1agr2RSKU/fcOH913x3l84+xKWrmyoDIm4C9RZ9VVr9iOrOOeXJs+UYRK7NMfX/PPh 0ySQGGNhsinbU+Lus18jR96yLJwWo61FAIeBt9efJQhI97d5vpijIxB87c1J1Mu8ce+M wVmORnzq1GWgen4GAL+FBpKk4yl1F/gG0cwaYHwqpOkaHXkBo8Y5mx10o8MgBAvgDwHb xnqaLRjQCx3psrrs25oOsiX4V15NbutiIp/RbPkvhbKgvkmA37Ov7bIfQrvcs3yeJjSI pw== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2xyhku9upx-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 07 Feb 2020 10:51:24 +0100 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id EE150100039; Fri, 7 Feb 2020 10:51:18 +0100 (CET) Received: from Webmail-eu.st.com (sfhdag3node3.st.com [10.75.127.9]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id DE6A9221629; Fri, 7 Feb 2020 10:51:18 +0100 (CET) Received: from localhost (10.75.127.49) by SFHDAG3NODE3.st.com (10.75.127.9) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Fri, 7 Feb 2020 10:51:18 +0100 From: Benjamin Gaignard To: , , , , , CC: , , , , Benjamin Gaignard Subject: [PATCH v3 2/2] dt-bindings: net: can: Convert M_CAN to json-schema Date: Fri, 7 Feb 2020 10:51:13 +0100 Message-ID: <20200207095113.14489-3-benjamin.gaignard@st.com> X-Mailer: git-send-email 2.15.0 In-Reply-To: <20200207095113.14489-1-benjamin.gaignard@st.com> References: <20200207095113.14489-1-benjamin.gaignard@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.49] X-ClientProxiedBy: SFHDAG3NODE2.st.com (10.75.127.8) To SFHDAG3NODE3.st.com (10.75.127.9) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.138,18.0.572 definitions=2020-02-07_01:2020-02-07,2020-02-06 signatures=0 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Convert M_CAN bindings to json-schema Signed-off-by: Benjamin Gaignard ---version 3: - move can-transceive node into bosch,m_can.yaml bindings .../devicetree/bindings/net/can/bosch,m_can.yaml | 147 +++++++++++++++++++++ .../devicetree/bindings/net/can/m_can.txt | 75 ----------- 2 files changed, 147 insertions(+), 75 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/can/bosch,m_can.yaml delete mode 100644 Documentation/devicetree/bindings/net/can/m_can.txt diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml new file mode 100644 index 000000000000..94fd2040a9be --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch MCAN controller Bindings + +description: Bosch MCAN controller for CAN bus + +maintainers: + - Sriram Dash + +allOf: + - $ref: can-transceiver.yaml + +properties: + compatible: + const: bosch,m_can + + reg: + items: + - description: M_CAN registers map + - description: message RAM + + reg-names: + items: + - const: m_can + - const: message_ram + + interrupts: + items: + - description: interrupt line0 + - description: interrupt line1 + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: int0 + - const: int1 + minItems: 1 + maxItems: 2 + + clocks: + items: + - description: peripheral clock + - description: bus clock + + clock-names: + items: + - const: hclk + - const: cclk + + bosch,mram-cfg: + description: | + Message RAM configuration data. + Multiple M_CAN instances can share the same Message RAM + and each element(e.g Rx FIFO or Tx Buffer and etc) number + in Message RAM is also configurable, so this property is + telling driver how the shared or private Message RAM are + used by this M_CAN controller. + + The format should be as follows: + + The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to + 0x0 if you're using a private Message RAM. The remain cells + are used to specify how many elements are used for each FIFO/Buffer. + + M_CAN includes the following elements according to user manual: + 11-bit Filter 0-128 elements / 0-128 words + 29-bit Filter 0-64 elements / 0-128 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words + Rx Buffers 0-64 elements / 0-1152 words + Tx Event FIFO 0-32 elements / 0-64 words + Tx Buffers 0-32 elements / 0-576 words + + Please refer to 2.4.1 Message RAM Configuration in Bosch + M_CAN user manual for details. + allOf: + - $ref: /schemas/types.yaml#/definitions/int32-array + - items: + items: + - description: The 'offset' is an address offset of the Message RAM + where the following elements start from. This is usually + set to 0x0 if you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 + + can-transceiver: + $ref: can-transceiver.yaml# + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - clocks + - clock-names + - bosch,mram-cfg + +additionalProperties: false + +examples: + - | + #include + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + interrupts = <0 114 0x04>, <0 114 0x04>; + interrupt-names = "int0", "int1"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt deleted file mode 100644 index ed614383af9c..000000000000 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ /dev/null @@ -1,75 +0,0 @@ -Bosch MCAN controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "bosch,m_can" for M_CAN controllers -- reg : physical base address and size of the M_CAN - registers map and Message RAM -- reg-names : Should be "m_can" and "message_ram" -- interrupts : Should be the interrupt number of M_CAN interrupt - line 0 and line 1, could be same if sharing - the same interrupt. -- interrupt-names : Should contain "int0" and "int1" -- clocks : Clocks used by controller, should be host clock - and CAN clock. -- clock-names : Should contain "hclk" and "cclk" -- pinctrl- : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt -- pinctrl-names : Names corresponding to the numbered pinctrl states -- bosch,mram-cfg : Message RAM configuration data. - Multiple M_CAN instances can share the same Message - RAM and each element(e.g Rx FIFO or Tx Buffer and etc) - number in Message RAM is also configurable, - so this property is telling driver how the shared or - private Message RAM are used by this M_CAN controller. - - The format should be as follows: - - The 'offset' is an address offset of the Message RAM - where the following elements start from. This is - usually set to 0x0 if you're using a private Message - RAM. The remain cells are used to specify how many - elements are used for each FIFO/Buffer. - - M_CAN includes the following elements according to user manual: - 11-bit Filter 0-128 elements / 0-128 words - 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words - Rx Buffers 0-64 elements / 0-1152 words - Tx Event FIFO 0-32 elements / 0-64 words - Tx Buffers 0-32 elements / 0-576 words - - Please refer to 2.4.1 Message RAM Configuration in - Bosch M_CAN user manual for details. - -Optional Subnode: -- can-transceiver : Can-transceiver subnode describing maximum speed - that can be used for CAN/CAN-FD modes. See - Documentation/devicetree/bindings/net/can/can-transceiver.txt - for details. -Example: -SoC dtsi: -m_can1: can@20e8000 { - compatible = "bosch,m_can"; - reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; - reg-names = "m_can", "message_ram"; - interrupts = <0 114 0x04>, - <0 114 0x04>; - interrupt-names = "int0", "int1"; - clocks = <&clks IMX6SX_CLK_CANFD>, - <&clks IMX6SX_CLK_CANFD>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; -}; - -Board dts: -&m_can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_m_can1>; - status = "enabled"; - - can-transceiver { - max-bitrate = <5000000>; - }; -}; -- 2.15.0