Hi,

On Mon, Feb 10, 2020 at 09:56:33PM +0200, Andrey Lebedev wrote:
> A20 SoC (found in Cubieboard 2 among others) requires different LVDS set
> up procedure than A33. Timing controller (tcon) driver only implements
> sun6i-style procedure, that doesn't work on A20 (sun7i).

You're missing your Signed-off-by here.

> The support for such procedure is ported from u-boot and follows u-boot
> naming convention: SUN6I* for sun6i-style procedure, and SUN4I for other
> (which happens to be compatible with A20).

A commit log is mostly about why you're doing a change, this part can
be left out.

> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 91 ++++++++++++++++++++----------
>  drivers/gpu/drm/sun4i/sun4i_tcon.h | 12 ++++
>  2 files changed, 73 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index c81cdce6ed55..78896e907ca9 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -114,46 +114,74 @@ static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
>  	}
>  }
>
> +static void sun4i_tcon_lvds_sun6i_enable(struct sun4i_tcon *tcon,
> +					 const struct drm_encoder *encoder) {

This doesn't match the kernel coding style, make sure to run checkpatch.

Also, using something like sun6i_tcon_setup_lvds_phy would be more fit
to what this function is doing.

> +	u8 val;
> +	regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +		     SUN6I_TCON0_LVDS_ANA0_C(2) |
> +		     SUN6I_TCON0_LVDS_ANA0_V(3) |
> +		     SUN6I_TCON0_LVDS_ANA0_PD(2) |
> +		     SUN6I_TCON0_LVDS_ANA0_EN_LDO);
> +	udelay(2);
> +
> +	regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_MB,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_MB);
> +	udelay(2);
> +
> +	regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_DRVC,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_DRVC);
> +
> +	if (sun4i_tcon_get_pixel_depth(encoder) == 18)
> +		val = 7;
> +	else
> +		val = 0xf;
> +
> +	regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +			  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
> +			  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val));
> +
> +}
> +
> +static void sun4i_tcon_lvds_sun4i_enable(struct sun4i_tcon *tcon) {

And sun4i_tcon_setup_lvds_phy.

> +	regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +		     SUN4I_TCON0_LVDS_ANA0_CK_EN |
> +		     SUN4I_TCON0_LVDS_ANA0_REG_V |
> +		     SUN4I_TCON0_LVDS_ANA0_REG_C |
> +		     SUN4I_TCON0_LVDS_ANA0_EN_MB |
> +		     SUN4I_TCON0_LVDS_ANA0_PD |
> +		     SUN4I_TCON0_LVDS_ANA0_DCHS);
> +
> +	udelay(2); /* delay at least 1200 ns */
> +	regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG,
> +			   SUN4I_TCON0_LVDS_ANA1_INIT,
> +			   SUN4I_TCON0_LVDS_ANA1_INIT);
> +	udelay(1); /* delay at least 1200 ns */

The delay and your comment don't match.

> +	regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG,
> +			   SUN4I_TCON0_LVDS_ANA1_UPDATE,
> +			   SUN4I_TCON0_LVDS_ANA1_UPDATE);

You refer to U-Boot in your commit log, but the sequence is not quite
the same, why did you change it?

> +}
> +
> +
>  static void sun4i_tcon_lvds_set_status(struct sun4i_tcon *tcon,
>  				       const struct drm_encoder *encoder,
>  				       bool enabled)
>  {
>  	if (enabled) {
> -		u8 val;
> -
> +		// Enable LVDS interface

There's no need for that comment, it's simple enough :)

>  		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
>  				   SUN4I_TCON0_LVDS_IF_EN,
>  				   SUN4I_TCON0_LVDS_IF_EN);
>
> -		/*
> -		 * As their name suggest, these values only apply to the A31
> -		 * and later SoCs. We'll have to rework this when merging
> -		 * support for the older SoCs.
> -		 */
> -		regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> -			     SUN6I_TCON0_LVDS_ANA0_C(2) |
> -			     SUN6I_TCON0_LVDS_ANA0_V(3) |
> -			     SUN6I_TCON0_LVDS_ANA0_PD(2) |
> -			     SUN6I_TCON0_LVDS_ANA0_EN_LDO);
> -		udelay(2);
> -
> -		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> -				   SUN6I_TCON0_LVDS_ANA0_EN_MB,
> -				   SUN6I_TCON0_LVDS_ANA0_EN_MB);
> -		udelay(2);
> -
> -		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> -				   SUN6I_TCON0_LVDS_ANA0_EN_DRVC,
> -				   SUN6I_TCON0_LVDS_ANA0_EN_DRVC);
> -
> -		if (sun4i_tcon_get_pixel_depth(encoder) == 18)
> -			val = 7;
> -		else
> -			val = 0xf;
> +		// Perform SoC-specific setup procedure

Ditto.

> +		if (tcon->quirks->sun6i_lvds_init) {
> +			sun4i_tcon_lvds_sun6i_enable(tcon, encoder);
> +		}
> +		else {
> +			sun4i_tcon_lvds_sun4i_enable(tcon);
> +		}
>
> -		regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> -				  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
> -				  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val));
>  	} else {
>  		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
>  				   SUN4I_TCON0_LVDS_IF_EN, 0);
> @@ -1454,6 +1482,7 @@ static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
>  };
>
>  static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
> +	.supports_lvds		= true,
>  	.has_channel_0		= true,
>  	.has_channel_1		= true,
>  	.dclk_min_div		= 4,
> @@ -1464,11 +1493,13 @@ static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
>  static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
>  	.has_channel_0		= true,
>  	.has_lvds_alt		= true,
> +	.sun6i_lvds_init	= true,

Using a function pointer here (like we're doing with set_mux) would be
more future proof.

>  	.dclk_min_div		= 1,
>  };
>
>  static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
>  	.supports_lvds		= true,
> +	.sun6i_lvds_init	= true,
>  	.has_channel_0		= true,
>  	.dclk_min_div		= 1,
>  };
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> index a62ec826ae71..973901c1bee5 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> @@ -193,6 +193,13 @@
>  #define SUN4I_TCON_MUX_CTRL_REG			0x200
>
>  #define SUN4I_TCON0_LVDS_ANA0_REG		0x220
> +#define SUN4I_TCON0_LVDS_ANA0_DCHS			BIT(16)
> +#define SUN4I_TCON0_LVDS_ANA0_PD			BIT(20) | BIT(21)
> +#define SUN4I_TCON0_LVDS_ANA0_EN_MB			BIT(22)
> +#define SUN4I_TCON0_LVDS_ANA0_REG_C			BIT(24) | BIT(25)
> +#define SUN4I_TCON0_LVDS_ANA0_REG_V			BIT(26) | BIT(27)
> +#define SUN4I_TCON0_LVDS_ANA0_CK_EN			BIT(29) | BIT(28)
> +
>  #define SUN6I_TCON0_LVDS_ANA0_EN_MB			BIT(31)
>  #define SUN6I_TCON0_LVDS_ANA0_EN_LDO			BIT(30)
>  #define SUN6I_TCON0_LVDS_ANA0_EN_DRVC			BIT(24)
> @@ -201,6 +208,10 @@
>  #define SUN6I_TCON0_LVDS_ANA0_V(x)			(((x) & 3) << 8)
>  #define SUN6I_TCON0_LVDS_ANA0_PD(x)			(((x) & 3) << 4)
>
> +#define SUN4I_TCON0_LVDS_ANA1_REG		0x224
> +#define SUN4I_TCON0_LVDS_ANA1_INIT			(0x1f << 26 | 0x1f << 10)
> +#define SUN4I_TCON0_LVDS_ANA1_UPDATE			(0x1f << 16 | 0x1f << 00)

Having proper defines for those fields would be great too.

Side question, this will need some DT changes too, right?

Maxime