linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/3] x86/boot/compressed/32: Simplify calculation of output address
@ 2020-01-07 19:44 Arvind Sankar
  2020-01-07 19:44 ` [PATCH 2/3] x86/boot/compressed/64: Use leal to initialize boot stack pointer Arvind Sankar
                   ` (2 more replies)
  0 siblings, 3 replies; 11+ messages in thread
From: Arvind Sankar @ 2020-01-07 19:44 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H. Peter Anvin
  Cc: x86, linux-kernel

Condense the calculation of decompressed kernel start a little.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
 arch/x86/boot/compressed/head_32.S | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index f2dfd6d083ef..1cc55c79d1d0 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -240,11 +240,9 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 				/* push arguments for extract_kernel: */
 	pushl	$z_output_len	/* decompressed length, end of relocs */
 
-	movl    BP_init_size(%esi), %eax
-	subl    $_end, %eax
-	movl    %ebx, %ebp
-	subl    %eax, %ebp
-	pushl	%ebp		/* output address */
+	leal	_end(%ebx), %eax
+	subl    BP_init_size(%esi), %eax
+	pushl	%eax		/* output address */
 
 	pushl	$z_input_len	/* input_len */
 	leal	input_data(%ebx), %eax
-- 
2.24.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 2/3] x86/boot/compressed/64: Use leal to initialize boot stack pointer
  2020-01-07 19:44 [PATCH 1/3] x86/boot/compressed/32: Simplify calculation of output address Arvind Sankar
@ 2020-01-07 19:44 ` Arvind Sankar
  2020-02-12 12:04   ` [tip: x86/boot] x86/boot/compressed/64: Use LEA " tip-bot2 for Arvind Sankar
  2020-01-07 19:44 ` [PATCH 3/3] x86/boot/compressed/64: Use 32-bit move for z_output_len Arvind Sankar
  2020-01-23 11:04 ` [tip: x86/asm] x86/boot: Simplify calculation of output address tip-bot2 for Arvind Sankar
  2 siblings, 1 reply; 11+ messages in thread
From: Arvind Sankar @ 2020-01-07 19:44 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H. Peter Anvin
  Cc: x86, linux-kernel

It's shorter, and it's what we use in every other place, so make it
consistent.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
 arch/x86/boot/compressed/head_64.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 58a512e33d8d..edd29340bcfd 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -81,9 +81,7 @@ SYM_FUNC_START(startup_32)
 	subl	$1b, %ebp
 
 /* setup a stack and make sure cpu supports long mode. */
-	movl	$boot_stack_end, %eax
-	addl	%ebp, %eax
-	movl	%eax, %esp
+	leal	boot_stack_end(%ebp), %esp
 
 	call	verify_cpu
 	testl	%eax, %eax
-- 
2.24.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 3/3] x86/boot/compressed/64: Use 32-bit move for z_output_len
  2020-01-07 19:44 [PATCH 1/3] x86/boot/compressed/32: Simplify calculation of output address Arvind Sankar
  2020-01-07 19:44 ` [PATCH 2/3] x86/boot/compressed/64: Use leal to initialize boot stack pointer Arvind Sankar
@ 2020-01-07 19:44 ` Arvind Sankar
  2020-02-11 16:17   ` Borislav Petkov
  2020-01-23 11:04 ` [tip: x86/asm] x86/boot: Simplify calculation of output address tip-bot2 for Arvind Sankar
  2 siblings, 1 reply; 11+ messages in thread
From: Arvind Sankar @ 2020-01-07 19:44 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar, Borislav Petkov, H. Peter Anvin
  Cc: x86, linux-kernel

z_output_len is a 32-bit quantity, it's enough to use a 32-bit move to
load it.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
 arch/x86/boot/compressed/head_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index edd29340bcfd..17139c130ac9 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -531,7 +531,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
-	movq	$z_output_len, %r9	/* decompressed length, end of relocs */
+	movl	$z_output_len, %r9d	/* decompressed length, end of relocs */
 	call	extract_kernel		/* returns kernel location in %rax */
 	popq	%rsi
 
-- 
2.24.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [tip: x86/asm] x86/boot: Simplify calculation of output address
  2020-01-07 19:44 [PATCH 1/3] x86/boot/compressed/32: Simplify calculation of output address Arvind Sankar
  2020-01-07 19:44 ` [PATCH 2/3] x86/boot/compressed/64: Use leal to initialize boot stack pointer Arvind Sankar
  2020-01-07 19:44 ` [PATCH 3/3] x86/boot/compressed/64: Use 32-bit move for z_output_len Arvind Sankar
@ 2020-01-23 11:04 ` tip-bot2 for Arvind Sankar
  2 siblings, 0 replies; 11+ messages in thread
From: tip-bot2 for Arvind Sankar @ 2020-01-23 11:04 UTC (permalink / raw)
  To: linux-tip-commits; +Cc: Arvind Sankar, Borislav Petkov, x86, LKML

The following commit has been merged into the x86/asm branch of tip:

Commit-ID:     183ef7adf4ed638ac0fb0c3c9a71fc00e8512b61
Gitweb:        https://git.kernel.org/tip/183ef7adf4ed638ac0fb0c3c9a71fc00e8512b61
Author:        Arvind Sankar <nivedita@alum.mit.edu>
AuthorDate:    Tue, 07 Jan 2020 14:44:34 -05:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Thu, 23 Jan 2020 11:58:43 +01:00

x86/boot: Simplify calculation of output address

Condense the calculation of decompressed kernel start a little.

Committer notes:

before:

ebp = ebx - (init_size - _end)

after:

eax = (ebx + _end) - init_size

where in both ebx contains the temporary address the kernel is moved to
for in-place decompression.

The before and after difference in register state is %eax and %ebp
but that is immaterial because the compressed image is not built with
-mregparm, i.e., all arguments of the following extract_kernel() call
are passed on the stack.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200107194436.2166846-1-nivedita@alum.mit.edu
---
 arch/x86/boot/compressed/head_32.S | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index f2dfd6d..1cc55c7 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -240,11 +240,9 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 				/* push arguments for extract_kernel: */
 	pushl	$z_output_len	/* decompressed length, end of relocs */
 
-	movl    BP_init_size(%esi), %eax
-	subl    $_end, %eax
-	movl    %ebx, %ebp
-	subl    %eax, %ebp
-	pushl	%ebp		/* output address */
+	leal	_end(%ebx), %eax
+	subl    BP_init_size(%esi), %eax
+	pushl	%eax		/* output address */
 
 	pushl	$z_input_len	/* input_len */
 	leal	input_data(%ebx), %eax

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 3/3] x86/boot/compressed/64: Use 32-bit move for z_output_len
  2020-01-07 19:44 ` [PATCH 3/3] x86/boot/compressed/64: Use 32-bit move for z_output_len Arvind Sankar
@ 2020-02-11 16:17   ` Borislav Petkov
  2020-02-11 17:33     ` [PATCH v2] x86/boot: Use 32-bit (zero-extended) " Arvind Sankar
  0 siblings, 1 reply; 11+ messages in thread
From: Borislav Petkov @ 2020-02-11 16:17 UTC (permalink / raw)
  To: Arvind Sankar
  Cc: Thomas Gleixner, Ingo Molnar, H. Peter Anvin, x86, linux-kernel,
	Michael Matz

On Tue, Jan 07, 2020 at 02:44:36PM -0500, Arvind Sankar wrote:
> z_output_len is a 32-bit quantity,

It took me a while to figure out why that is, with Michael's help.
Please write in the commit message why it is a 32-bit quantity so that
it is clear to readers.

Thx.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2] x86/boot: Use 32-bit (zero-extended) move for z_output_len
  2020-02-11 16:17   ` Borislav Petkov
@ 2020-02-11 17:33     ` Arvind Sankar
  2020-02-11 18:15       ` Borislav Petkov
  2020-02-12 12:04       ` [tip: x86/boot] x86/boot/compressed/64: Use 32-bit (zero-extended) MOV " tip-bot2 for Arvind Sankar
  0 siblings, 2 replies; 11+ messages in thread
From: Arvind Sankar @ 2020-02-11 17:33 UTC (permalink / raw)
  To: Borislav Petkov
  Cc: Thomas Gleixner, Ingo Molnar, H. Peter Anvin, x86, linux-kernel,
	Michael Matz

z_output_len is the size of the decompressed payload (i.e. vmlinux +
vmlinux.relocs) and is generated as an unsigned 32-bit quantity by
mkpiggy.c.

The current movq $z_output_len, %r9 instruction generates a
sign-extended move to %r9. Using movl $z_output_len, %r9d will instead
zero-extend into %r9, which is appropriate for an unsigned 32-bit
quantity. This is also what we already do for z_input_len, the size of
the compressed payload.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
v2: Improve commit message

 arch/x86/boot/compressed/head_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1f1f6c8139b3..03369246a4ff 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -484,7 +484,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
-	movq	$z_output_len, %r9	/* decompressed length, end of relocs */
+	movl	$z_output_len, %r9d	/* decompressed length, end of relocs */
 	call	extract_kernel		/* returns kernel location in %rax */
 	popq	%rsi
 
-- 
2.24.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] x86/boot: Use 32-bit (zero-extended) move for z_output_len
  2020-02-11 17:33     ` [PATCH v2] x86/boot: Use 32-bit (zero-extended) " Arvind Sankar
@ 2020-02-11 18:15       ` Borislav Petkov
  2020-02-11 19:27         ` Arvind Sankar
  2020-02-12 12:04       ` [tip: x86/boot] x86/boot/compressed/64: Use 32-bit (zero-extended) MOV " tip-bot2 for Arvind Sankar
  1 sibling, 1 reply; 11+ messages in thread
From: Borislav Petkov @ 2020-02-11 18:15 UTC (permalink / raw)
  To: Arvind Sankar
  Cc: Thomas Gleixner, Ingo Molnar, H. Peter Anvin, x86, linux-kernel,
	Michael Matz

On Tue, Feb 11, 2020 at 12:33:33PM -0500, Arvind Sankar wrote:
> z_output_len is the size of the decompressed payload (i.e. vmlinux +
> vmlinux.relocs) and is generated as an unsigned 32-bit quantity by
> mkpiggy.c.
> 
> The current movq $z_output_len, %r9 instruction generates a
> sign-extended move to %r9. Using movl $z_output_len, %r9d will instead
> zero-extend into %r9, which is appropriate for an unsigned 32-bit
> quantity. This is also what we already do for z_input_len, the size of
> the compressed payload.

Yes, thanks.

What I'll also add to this is the fact that

init_size:              .long INIT_SIZE         # kernel initialization size

where z_output_len participates in through INIT_SIZE is a 32-bit
quantity determined by the ".long" so even if something made
z_output_len bigger than 32-bit by explicitly using MOVABS so that it
builds fine, you'd still get:

arch/x86/boot/header.S: Assembler messages:
arch/x86/boot/header.S:568: Warning: value 0x10103b000 truncated to 0x103b000

as a warning.

Btw, while poking at this, we found out that the MOV really remains
MOV and not MOVABS if gas doesn't know what the quantity behind the
z_output_len symbol is, as it is a symbol assignment. Which, AFAIU, with
ELF64 objects, it should be using 8-byte quantities in the symbol table
to accommodate such assignments. But for some reason it doesn't.

Anyway, Michael can correct me if I'm still imprecise here.

Thx.

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] x86/boot: Use 32-bit (zero-extended) move for z_output_len
  2020-02-11 18:15       ` Borislav Petkov
@ 2020-02-11 19:27         ` Arvind Sankar
  2020-02-12  9:47           ` Borislav Petkov
  0 siblings, 1 reply; 11+ messages in thread
From: Arvind Sankar @ 2020-02-11 19:27 UTC (permalink / raw)
  To: Borislav Petkov
  Cc: Arvind Sankar, Thomas Gleixner, Ingo Molnar, H. Peter Anvin, x86,
	linux-kernel, Michael Matz

On Tue, Feb 11, 2020 at 07:15:59PM +0100, Borislav Petkov wrote:
> On Tue, Feb 11, 2020 at 12:33:33PM -0500, Arvind Sankar wrote:
> > z_output_len is the size of the decompressed payload (i.e. vmlinux +
> > vmlinux.relocs) and is generated as an unsigned 32-bit quantity by
> > mkpiggy.c.
> > 
> > The current movq $z_output_len, %r9 instruction generates a
> > sign-extended move to %r9. Using movl $z_output_len, %r9d will instead
> > zero-extend into %r9, which is appropriate for an unsigned 32-bit
> > quantity. This is also what we already do for z_input_len, the size of
> > the compressed payload.
> 
> Yes, thanks.
> 
> What I'll also add to this is the fact that
> 
> init_size:              .long INIT_SIZE         # kernel initialization size
> 
> where z_output_len participates in through INIT_SIZE is a 32-bit
> quantity determined by the ".long" so even if something made
> z_output_len bigger than 32-bit by explicitly using MOVABS so that it
> builds fine, you'd still get:
> 
> arch/x86/boot/header.S: Assembler messages:
> arch/x86/boot/header.S:568: Warning: value 0x10103b000 truncated to 0x103b000
> 
> as a warning.

Yes, this is just a "neatening" patch to use a more appropriate
instruction. There would have to be a lot of work to allow kernels to be
bigger than 2Gb, they're currently limited to at most 1Gb (or even 0.5Gb
if KASLR is disabled) by KERNEL_IMAGE_SIZE definition in
asm/page_64_types.h and there are checks in the linker script and a
bunch of other places, so the decompressed length can't be much bigger
than that.

> 
> Btw, while poking at this, we found out that the MOV really remains
> MOV and not MOVABS if gas doesn't know what the quantity behind the
> z_output_len symbol is, as it is a symbol assignment. Which, AFAIU, with
> ELF64 objects, it should be using 8-byte quantities in the symbol table
> to accommodate such assignments. But for some reason it doesn't.
> 
> Anyway, Michael can correct me if I'm still imprecise here.

For absolute symbols that it sees in the same file it does use 64-bit
immediate move for movq if necessary, but otherwise seems to need the
explicit opcode.

> 
> Thx.
> 
> -- 
> Regards/Gruss,
>     Boris.
> 
> https://people.kernel.org/tglx/notes-about-netiquette

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2] x86/boot: Use 32-bit (zero-extended) move for z_output_len
  2020-02-11 19:27         ` Arvind Sankar
@ 2020-02-12  9:47           ` Borislav Petkov
  0 siblings, 0 replies; 11+ messages in thread
From: Borislav Petkov @ 2020-02-12  9:47 UTC (permalink / raw)
  To: Arvind Sankar
  Cc: Thomas Gleixner, Ingo Molnar, H. Peter Anvin, x86, linux-kernel,
	Michael Matz

On Tue, Feb 11, 2020 at 02:27:39PM -0500, Arvind Sankar wrote:
> Yes, this is just a "neatening" patch to use a more appropriate
> instruction. There would have to be a lot of work to allow kernels to be
> bigger than 2Gb,

And yet we're bloating up, right into that limit... ;-\

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [tip: x86/boot] x86/boot/compressed/64: Use LEA to initialize boot stack pointer
  2020-01-07 19:44 ` [PATCH 2/3] x86/boot/compressed/64: Use leal to initialize boot stack pointer Arvind Sankar
@ 2020-02-12 12:04   ` tip-bot2 for Arvind Sankar
  0 siblings, 0 replies; 11+ messages in thread
From: tip-bot2 for Arvind Sankar @ 2020-02-12 12:04 UTC (permalink / raw)
  To: linux-tip-commits; +Cc: Arvind Sankar, Borislav Petkov, x86, LKML

The following commit has been merged into the x86/boot branch of tip:

Commit-ID:     48bfdb9deffdc6b683feb25e15f4f26aac503501
Gitweb:        https://git.kernel.org/tip/48bfdb9deffdc6b683feb25e15f4f26aac503501
Author:        Arvind Sankar <nivedita@alum.mit.edu>
AuthorDate:    Tue, 07 Jan 2020 14:44:35 -05:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Wed, 12 Feb 2020 11:11:06 +01:00

x86/boot/compressed/64: Use LEA to initialize boot stack pointer

It's shorter, and it's what is used in every other place, so make it
consistent.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200107194436.2166846-2-nivedita@alum.mit.edu
---
 arch/x86/boot/compressed/head_64.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 1f1f6c8..d1220de 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -81,9 +81,7 @@ SYM_FUNC_START(startup_32)
 	subl	$1b, %ebp
 
 /* setup a stack and make sure cpu supports long mode. */
-	movl	$boot_stack_end, %eax
-	addl	%ebp, %eax
-	movl	%eax, %esp
+	leal	boot_stack_end(%ebp), %esp
 
 	call	verify_cpu
 	testl	%eax, %eax

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [tip: x86/boot] x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len
  2020-02-11 17:33     ` [PATCH v2] x86/boot: Use 32-bit (zero-extended) " Arvind Sankar
  2020-02-11 18:15       ` Borislav Petkov
@ 2020-02-12 12:04       ` tip-bot2 for Arvind Sankar
  1 sibling, 0 replies; 11+ messages in thread
From: tip-bot2 for Arvind Sankar @ 2020-02-12 12:04 UTC (permalink / raw)
  To: linux-tip-commits; +Cc: Arvind Sankar, Borislav Petkov, x86, LKML

The following commit has been merged into the x86/boot branch of tip:

Commit-ID:     a86255fe5258714e1f7c1bdfe95f08e4d098d450
Gitweb:        https://git.kernel.org/tip/a86255fe5258714e1f7c1bdfe95f08e4d098d450
Author:        Arvind Sankar <nivedita@alum.mit.edu>
AuthorDate:    Tue, 11 Feb 2020 12:33:33 -05:00
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Wed, 12 Feb 2020 11:15:31 +01:00

x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len

z_output_len is the size of the decompressed payload (i.e. vmlinux +
vmlinux.relocs) and is generated as an unsigned 32-bit quantity by
mkpiggy.c.

The current

  movq $z_output_len, %r9

instruction generates a sign-extended move to %r9. Using

  movl $z_output_len, %r9d

will instead zero-extend into %r9, which is appropriate for an unsigned
32-bit quantity. This is also what is already done for z_input_len, the
size of the compressed payload.

[ bp:

  Also, z_output_len cannot be a 64-bit quantity because it participates
  in:

  init_size:              .long INIT_SIZE         # kernel initialization size

  through INIT_SIZE which is a 32-bit quantity determined by the .long
  directive (vs .quad for 64-bit). Furthermore, if it really must be a
  64-bit quantity, then the insn must be MOVABS which can accommodate a
  64-bit immediate and which the toolchain does not generate automatically.
]

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200211173333.1722739-1-nivedita@alum.mit.edu
---
 arch/x86/boot/compressed/head_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d1220de..68f31c4 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -482,7 +482,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
-	movq	$z_output_len, %r9	/* decompressed length, end of relocs */
+	movl	$z_output_len, %r9d	/* decompressed length, end of relocs */
 	call	extract_kernel		/* returns kernel location in %rax */
 	popq	%rsi
 

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2020-02-12 12:04 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-07 19:44 [PATCH 1/3] x86/boot/compressed/32: Simplify calculation of output address Arvind Sankar
2020-01-07 19:44 ` [PATCH 2/3] x86/boot/compressed/64: Use leal to initialize boot stack pointer Arvind Sankar
2020-02-12 12:04   ` [tip: x86/boot] x86/boot/compressed/64: Use LEA " tip-bot2 for Arvind Sankar
2020-01-07 19:44 ` [PATCH 3/3] x86/boot/compressed/64: Use 32-bit move for z_output_len Arvind Sankar
2020-02-11 16:17   ` Borislav Petkov
2020-02-11 17:33     ` [PATCH v2] x86/boot: Use 32-bit (zero-extended) " Arvind Sankar
2020-02-11 18:15       ` Borislav Petkov
2020-02-11 19:27         ` Arvind Sankar
2020-02-12  9:47           ` Borislav Petkov
2020-02-12 12:04       ` [tip: x86/boot] x86/boot/compressed/64: Use 32-bit (zero-extended) MOV " tip-bot2 for Arvind Sankar
2020-01-23 11:04 ` [tip: x86/asm] x86/boot: Simplify calculation of output address tip-bot2 for Arvind Sankar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).