linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Boris Brezillon <bbrezillon@kernel.org>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Jeff Kletsky <git-commits@allycomm.com>,
	liaoweixiong <liaoweixiong@allwinnertech.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Peter Pan <peterpandong@micron.com>
Cc: "stable@vger.kernel.org" <stable@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"Richard Weinberger" <richard@nod.at>
Subject: [PATCH 1/3] mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers
Date: Tue, 11 Feb 2020 16:35:33 +0000	[thread overview]
Message-ID: <20200211163452.25442-2-frieder.schrempf@kontron.de> (raw)
In-Reply-To: <20200211163452.25442-1-frieder.schrempf@kontron.de>

From: Frieder Schrempf <frieder.schrempf@kontron.de>

For reading and writing the bad block markers, spinand->oobbuf is
currently used as a buffer for the marker bytes. During the
underlying read and write operations to actually get/set the content
of the OOB area, the content of spinand->oobbuf is reused and changed
by accessing it through spinand->oobbuf and/or spinand->databuf.

This is a flaw in the original design of the SPI MEM core and at the
latest from 13c15e07eedf ("mtd: spinand: Handle the case where
PROGRAM LOAD does not reset the cache") on, it results in not having
the bad block marker written at all, as the spinand->oobbuf is
cleared to 0xff after setting the marker bytes to zero.

To fix it, we now just store the two bytes for the marker on the
stack and let the read/write operations copy it from/to the page
buffer later.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 drivers/mtd/nand/spi/core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 89f6beefb01c..5d267a67a5f7 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -568,18 +568,18 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
 static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct spinand_device *spinand = nand_to_spinand(nand);
+	u8 marker[] = { 0, 0 };
 	struct nand_page_io_req req = {
 		.pos = *pos,
 		.ooblen = 2,
 		.ooboffs = 0,
-		.oobbuf.in = spinand->oobbuf,
+		.oobbuf.in = marker,
 		.mode = MTD_OPS_RAW,
 	};
 
-	memset(spinand->oobbuf, 0, 2);
 	spinand_select_target(spinand, pos->target);
 	spinand_read_page(spinand, &req, false);
-	if (spinand->oobbuf[0] != 0xff || spinand->oobbuf[1] != 0xff)
+	if (marker[0] != 0xff || marker[1] != 0xff)
 		return true;
 
 	return false;
@@ -603,11 +603,12 @@ static int spinand_mtd_block_isbad(struct mtd_info *mtd, loff_t offs)
 static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct spinand_device *spinand = nand_to_spinand(nand);
+	u8 marker[] = { 0, 0 };
 	struct nand_page_io_req req = {
 		.pos = *pos,
 		.ooboffs = 0,
 		.ooblen = 2,
-		.oobbuf.out = spinand->oobbuf,
+		.oobbuf.out = marker,
 	};
 	int ret;
 
@@ -622,7 +623,6 @@ static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
 
 	spinand_erase_op(spinand, pos);
 
-	memset(spinand->oobbuf, 0, 2);
 	return spinand_write_page(spinand, &req);
 }
 
-- 
2.17.1

  reply	other threads:[~2020-02-11 16:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-11 16:35 [PATCH 0/3] mtd: spinand: Fix reading and writing of bad block markers Schrempf Frieder
2020-02-11 16:35 ` Schrempf Frieder [this message]
2020-02-11 18:35   ` [PATCH 1/3] mtd: spinand: Stop using spinand->oobbuf for buffering " Schrempf Frieder
2020-02-17 11:17   ` Boris Brezillon
2020-02-11 16:35 ` [PATCH 2/3] mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB Schrempf Frieder
2020-02-17 11:18   ` Boris Brezillon
2020-02-11 16:35 ` [PATCH 3/3] mtd: spinand: Wait for the erase op to finish before writing a bad block marker Schrempf Frieder
2020-02-17 10:39   ` Miquel Raynal
2020-02-17 11:14     ` Boris Brezillon
2020-02-17 11:29       ` Schrempf Frieder
2020-02-17 11:19     ` Schrempf Frieder
2020-02-17 11:30       ` David Laight

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200211163452.25442-2-frieder.schrempf@kontron.de \
    --to=frieder.schrempf@kontron.de \
    --cc=bbrezillon@kernel.org \
    --cc=git-commits@allycomm.com \
    --cc=liaoweixiong@allwinnertech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=peterpandong@micron.com \
    --cc=richard@nod.at \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).