From: Matthew Wilcox <willy@infradead.org>
To: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 17/25] iomap: Support large pages in write paths
Date: Tue, 11 Feb 2020 20:18:37 -0800 [thread overview]
Message-ID: <20200212041845.25879-18-willy@infradead.org> (raw)
In-Reply-To: <20200212041845.25879-1-willy@infradead.org>
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Use thp_size() instead of PAGE_SIZE, offset_in_this_page().
Also simplify the logic in iomap_do_writepage() for determining end of
file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
---
fs/iomap/buffered-io.c | 36 +++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index 68f8903ecd6d..af1f56408fcd 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -445,7 +445,7 @@ iomap_is_partially_uptodate(struct page *page, unsigned long from,
unsigned i;
/* Limit range to one page */
- len = min_t(unsigned, PAGE_SIZE - from, count);
+ len = min_t(unsigned, thp_size(page) - from, count);
/* First and last blocks in range within page */
first = from >> inode->i_blkbits;
@@ -488,7 +488,7 @@ iomap_invalidatepage(struct page *page, unsigned int offset, unsigned int len)
* If we are invalidating the entire page, clear the dirty state from it
* and release it to avoid unnecessary buildup of the LRU.
*/
- if (offset == 0 && len == PAGE_SIZE) {
+ if (offset == 0 && len == thp_size(page)) {
WARN_ON_ONCE(PageWriteback(page));
cancel_dirty_page(page);
iomap_page_release(page);
@@ -564,7 +564,9 @@ __iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, int flags,
loff_t block_size = i_blocksize(inode);
loff_t block_start = pos & ~(block_size - 1);
loff_t block_end = (pos + len + block_size - 1) & ~(block_size - 1);
- unsigned from = offset_in_page(pos), to = from + len, poff, plen;
+ unsigned from = offset_in_this_page(page, pos);
+ unsigned to = from + len;
+ unsigned poff, plen;
int status;
if (PageUptodate(page))
@@ -696,7 +698,7 @@ __iomap_write_end(struct inode *inode, loff_t pos, unsigned len,
*/
if (unlikely(copied < len && !PageUptodate(page)))
return 0;
- iomap_set_range_uptodate(page, offset_in_page(pos), len);
+ iomap_set_range_uptodate(page, offset_in_this_page(page, pos), len);
iomap_set_page_dirty(page);
return copied;
}
@@ -771,6 +773,10 @@ iomap_write_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
unsigned long bytes; /* Bytes to write to page */
size_t copied; /* Bytes copied from user */
+ /*
+ * XXX: We don't know what size page we'll find in the
+ * page cache, so only copy up to a regular page boundary.
+ */
offset = offset_in_page(pos);
bytes = min_t(unsigned long, PAGE_SIZE - offset,
iov_iter_count(i));
@@ -1320,7 +1326,7 @@ iomap_add_to_ioend(struct inode *inode, loff_t offset, struct page *page,
{
sector_t sector = iomap_sector(&wpc->iomap, offset);
unsigned len = i_blocksize(inode);
- unsigned poff = offset & (PAGE_SIZE - 1);
+ unsigned poff = offset & (thp_size(page) - 1);
bool merged, same_page = false;
if (!wpc->ioend || !iomap_can_add_to_ioend(wpc, offset, sector)) {
@@ -1372,9 +1378,10 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
unsigned len = i_blocksize(inode);
u64 file_offset; /* file offset of page */
int error = 0, count = 0, i;
+ int nr_blocks = i_blocks_per_page(inode, page);
LIST_HEAD(submit_list);
- WARN_ON_ONCE(i_blocks_per_page(inode, page) > 1 && !iop);
+ WARN_ON_ONCE(nr_blocks > 1 && !iop);
WARN_ON_ONCE(iop && atomic_read(&iop->write_count) != 0);
/*
@@ -1382,8 +1389,8 @@ iomap_writepage_map(struct iomap_writepage_ctx *wpc,
* end of the current map or find the current map invalid, grab a new
* one.
*/
- for (i = 0, file_offset = page_offset(page);
- i < (PAGE_SIZE >> inode->i_blkbits) && file_offset < end_offset;
+ for (i = 0, file_offset = file_offset_of_page(page);
+ i < nr_blocks && file_offset < end_offset;
i++, file_offset += len) {
if (iop && !test_bit(i, iop->uptodate))
continue;
@@ -1477,7 +1484,6 @@ iomap_do_writepage(struct page *page, struct writeback_control *wbc, void *data)
{
struct iomap_writepage_ctx *wpc = data;
struct inode *inode = page->mapping->host;
- pgoff_t end_index;
u64 end_offset;
loff_t offset;
@@ -1518,10 +1524,9 @@ iomap_do_writepage(struct page *page, struct writeback_control *wbc, void *data)
* ---------------------------------^------------------|
*/
offset = i_size_read(inode);
- end_index = offset >> PAGE_SHIFT;
- if (page->index < end_index)
- end_offset = (loff_t)(page->index + 1) << PAGE_SHIFT;
- else {
+ end_offset = file_offset_of_next_page(page);
+
+ if (end_offset > offset) {
/*
* Check whether the page to write out is beyond or straddles
* i_size or not.
@@ -1533,7 +1538,8 @@ iomap_do_writepage(struct page *page, struct writeback_control *wbc, void *data)
* | | Straddles |
* ---------------------------------^-----------|--------|
*/
- unsigned offset_into_page = offset & (PAGE_SIZE - 1);
+ unsigned offset_into_page = offset_in_this_page(page, offset);
+ pgoff_t end_index = offset >> PAGE_SHIFT;
/*
* Skip the page if it is fully outside i_size, e.g. due to a
@@ -1564,7 +1570,7 @@ iomap_do_writepage(struct page *page, struct writeback_control *wbc, void *data)
* memory is zeroed when mapped, and writes to that region are
* not written out to the file."
*/
- zero_user_segment(page, offset_into_page, PAGE_SIZE);
+ zero_user_segment(page, offset_into_page, thp_size(page));
/* Adjust the end_offset to the end of file */
end_offset = offset;
--
2.25.0
next prev parent reply other threads:[~2020-02-12 4:18 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 4:18 [PATCH v2 00/25] Large pages in the page cache Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 01/25] mm: Use vm_fault error code directly Matthew Wilcox
2020-02-12 7:34 ` Christoph Hellwig
2020-02-12 4:18 ` [PATCH v2 02/25] mm: Optimise find_subpage for !THP Matthew Wilcox
2020-02-12 7:41 ` Christoph Hellwig
2020-02-12 13:02 ` Matthew Wilcox
2020-02-12 17:52 ` Christoph Hellwig
2020-02-13 13:50 ` Kirill A. Shutemov
2020-02-12 4:18 ` [PATCH v2 03/25] mm: Use VM_BUG_ON_PAGE in clear_page_dirty_for_io Matthew Wilcox
2020-02-12 7:38 ` Christoph Hellwig
2020-02-13 13:50 ` Kirill A. Shutemov
2020-02-12 4:18 ` [PATCH v2 04/25] mm: Unexport find_get_entry Matthew Wilcox
2020-02-12 7:37 ` Christoph Hellwig
2020-02-13 13:51 ` Kirill A. Shutemov
2020-02-12 4:18 ` [PATCH v2 05/25] mm: Fix documentation of FGP flags Matthew Wilcox
2020-02-12 7:42 ` Christoph Hellwig
2020-02-12 19:11 ` Matthew Wilcox
2020-02-13 14:00 ` Kirill A. Shutemov
2020-02-13 13:59 ` Kirill A. Shutemov
2020-02-13 14:34 ` Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 06/25] mm: Allow hpages to be arbitrary order Matthew Wilcox
2020-02-13 14:11 ` Kirill A. Shutemov
2020-02-13 14:30 ` Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 07/25] mm: Introduce thp_size Matthew Wilcox
2020-02-13 14:19 ` Kirill A. Shutemov
2020-02-12 4:18 ` [PATCH v2 08/25] mm: Introduce thp_order Matthew Wilcox
2020-02-13 14:20 ` Kirill A. Shutemov
2020-02-12 4:18 ` [PATCH v2 09/25] fs: Add a filesystem flag for large pages Matthew Wilcox
2020-02-12 7:43 ` Christoph Hellwig
2020-02-12 14:59 ` Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 10/25] fs: Introduce i_blocks_per_page Matthew Wilcox
2020-02-12 7:44 ` Christoph Hellwig
2020-02-12 15:05 ` Matthew Wilcox
2020-02-12 17:54 ` Christoph Hellwig
2020-02-13 15:40 ` Kirill A. Shutemov
2020-02-13 16:07 ` Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 11/25] fs: Make page_mkwrite_check_truncate thp-aware Matthew Wilcox
2020-02-13 15:44 ` Kirill A. Shutemov
2020-02-13 16:26 ` Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 12/25] mm: Add file_offset_of_ helpers Matthew Wilcox
2020-02-12 7:46 ` Christoph Hellwig
2020-02-12 4:18 ` [PATCH v2 13/25] fs: Add zero_user_large Matthew Wilcox
2020-02-14 13:52 ` Kirill A. Shutemov
2020-02-14 16:03 ` Matthew Wilcox
2020-02-18 14:16 ` Kirill A. Shutemov
2020-02-18 16:13 ` Matthew Wilcox
2020-02-18 17:10 ` Kirill A. Shutemov
2020-02-18 18:07 ` Matthew Wilcox
2020-02-21 12:42 ` Kirill A. Shutemov
2020-02-12 4:18 ` [PATCH v2 14/25] iomap: Support arbitrarily many blocks per page Matthew Wilcox
2020-02-12 8:05 ` Christoph Hellwig
2020-02-12 4:18 ` [PATCH v2 15/25] iomap: Support large pages in iomap_adjust_read_range Matthew Wilcox
2020-02-12 8:11 ` Christoph Hellwig
2020-02-12 4:18 ` [PATCH v2 16/25] iomap: Support large pages in read paths Matthew Wilcox
2020-02-12 8:13 ` Christoph Hellwig
2020-02-12 17:45 ` Matthew Wilcox
2020-02-12 4:18 ` Matthew Wilcox [this message]
2020-02-12 8:17 ` [PATCH v2 17/25] iomap: Support large pages in write paths Christoph Hellwig
2020-02-12 4:18 ` [PATCH v2 18/25] iomap: Inline data shouldn't see large pages Matthew Wilcox
2020-02-12 8:05 ` Christoph Hellwig
2020-02-12 4:18 ` [PATCH v2 19/25] xfs: Support " Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 20/25] mm: Make prep_transhuge_page return its argument Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 21/25] mm: Add __page_cache_alloc_order Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 22/25] mm: Allow large pages to be added to the page cache Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 23/25] mm: Allow large pages to be removed from " Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 24/25] mm: Add large page readahead Matthew Wilcox
2020-02-12 4:18 ` [PATCH v2 25/25] mm: Align THP mappings for non-DAX Matthew Wilcox
2020-02-12 7:50 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200212041845.25879-18-willy@infradead.org \
--to=willy@infradead.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).