From: andrey.lebedev@gmail.com
To: mripard@kernel.org, wens@csie.org, airlied@linux.ie,
daniel@ffwll.ch, dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: linux-sunxi@googlegroups.com, Andrey Lebedev <andrey@lebedev.lt>
Subject: [PATCH v2 2/2] ARM: sun7i: dts: Add LVDS panel support on A20
Date: Thu, 13 Feb 2020 00:23:57 +0200 [thread overview]
Message-ID: <20200212222355.17141-2-andrey.lebedev@gmail.com> (raw)
In-Reply-To: <20200210195633.GA21832@kedthinkpad>
From: Andrey Lebedev <andrey@lebedev.lt>
Define pins for LVDS channels 0 and 1, configure reset line for tcon0 and
provide sample LVDS panel, connected to tcon0.
Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 45 +++++++++++++++++++++++++++++---
1 file changed, 42 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 92b5be97085d..b05fdf8df32e 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/clock/sun7i-a20-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
@@ -407,8 +408,8 @@
compatible = "allwinner,sun7i-a20-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&ccu RST_TCON0>;
- reset-names = "lcd";
+ resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+ reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
@@ -444,6 +445,11 @@
#size-cells = <0>;
reg = <1>;
+ tcon0_out_lvds: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lvds_in_tcon0>;
+ allwinner,tcon-channel = <0>;
+ };
tcon0_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
@@ -686,6 +692,19 @@
};
};
+ lvds_panel: panel@1c16500 {
+ compatible = "panel-lvds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ port {
+ lvds_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_lvds>;
+ };
+ };
+ };
+
spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
@@ -872,7 +891,7 @@
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA10",
+ "PA7", "PA8", "PA10",
"PA11", "PA12", "PA13",
"PA15", "PA16";
function = "gmac";
@@ -1162,6 +1181,26 @@
pins = "PI20", "PI21";
function = "uart7";
};
+
+ /omit-if-no-ref/
+ lcd_lvds0_pins: lcd_lvds0_pins {
+ allwinner,pins =
+ "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD6", "PD7", "PD8", "PD9";
+ allwinner,function = "lvds0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ /omit-if-no-ref/
+ lcd_lvds1_pins: lcd_lvds1_pins {
+ allwinner,pins =
+ "PD10", "PD11", "PD12", "PD13", "PD14",
+ "PD15", "PD16", "PD17", "PD18", "PD19";
+ allwinner,function = "lvds1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
timer@1c20c00 {
--
2.20.1
next prev parent reply other threads:[~2020-02-12 22:25 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-10 19:56 [PATCH 1/1] Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-11 7:20 ` Maxime Ripard
2020-02-11 20:48 ` Andrey Lebedev
2020-02-12 12:53 ` Maxime Ripard
2020-02-12 22:46 ` Andrey Lebedev
2020-02-13 9:24 ` Maxime Ripard
2020-02-13 18:11 ` Andrey Lebedev
2020-02-14 7:58 ` Maxime Ripard
2020-02-12 22:23 ` [PATCH v2 1/2] ARM: sun7i: " andrey.lebedev
2020-02-13 9:32 ` Maxime Ripard
2020-02-12 22:23 ` andrey.lebedev [this message]
2020-02-13 9:43 ` [PATCH v2 2/2] ARM: sun7i: dts: Add LVDS panel support on A20 Maxime Ripard
2020-02-13 20:08 ` Andrey Lebedev
2020-02-14 7:52 ` Maxime Ripard
2020-02-14 8:43 ` Andrey Lebedev
2020-02-14 8:53 ` Maxime Ripard
2020-02-14 21:32 ` Andrey Lebedev
2020-02-17 17:51 ` Maxime Ripard
2020-02-18 17:50 ` Andrey Lebedev
2020-02-19 12:06 ` Maxime Ripard
2020-02-13 20:18 ` [PATCH v3 1/3] drm/sun4i: tcon: Introduce LVDS setup routine setting Andrey Lebedev
2020-02-13 20:18 ` [PATCH v3 2/3] drm/sun4i: tcon: Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-13 20:18 ` [PATCH v3 3/3] ARM: dts: sun7i: Add LVDS panel support on A20 Andrey Lebedev
2020-02-14 8:55 ` Maxime Ripard
2020-02-19 18:08 ` PATCH v4 Andrey Lebedev
2020-02-19 18:08 ` [PATCH 1/5] drm/sun4i: tcon: Introduce LVDS setup routine setting Andrey Lebedev
2020-02-20 17:21 ` Maxime Ripard
2020-02-20 18:19 ` Andrey Lebedev
2020-02-19 18:08 ` [PATCH 2/5] drm/sun4i: tcon: Separate quirks for tcon0 and tcon1 on A20 Andrey Lebedev
2020-02-20 17:22 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 3/5] ARM: dts: sun7i: Add LVDS panel support " Andrey Lebedev
2020-02-20 17:23 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 4/5] dt-bindings: display: sun4i: New compatibles for A20 tcons Andrey Lebedev
2020-02-20 17:24 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 5/5] drm/sun4i: tcon: Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-20 17:25 ` Maxime Ripard
2020-04-01 10:59 ` Andrey Lebedev
2020-04-01 12:14 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200212222355.17141-2-andrey.lebedev@gmail.com \
--to=andrey.lebedev@gmail.com \
--cc=airlied@linux.ie \
--cc=andrey@lebedev.lt \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).