On Sun, Jan 19, 2020 at 10:30:58AM -0600, Samuel Holland wrote:
> The Pinebook does not use the CSI bus on the A64. In fact it does not
> use GPIO port E for anything at all. Thus the following regulators are
> not used and do not need voltages set:
>
>  - ALDO1: Connected to VCC-PE only
>  - DLDO3: Not connected
>  - ELDO3: Not connected
>
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Applied, thanks!
Maxime