linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Santosh Shilimkar <ssantosh@kernel.org>
Cc: <linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <t-kristo@ti.com>
Subject: [PATCH v3 2/2] clk: keystone: Add new driver to handle syscon based clocks
Date: Sat, 15 Feb 2020 19:47:24 +0530	[thread overview]
Message-ID: <20200215141724.32291-3-vigneshr@ti.com> (raw)
In-Reply-To: <20200215141724.32291-1-vigneshr@ti.com>

On TI's AM654/J721e SoCs, certain clocks can be gatemld/ungated by setting a
single bit in SoC's System Control Module registers. Sometime more than
one clock control can be in the same register.
Add a driver to support such clocks using syscon framework.
Driver currently supports controlling EHRPWM's TimeBase clock(TBCLK) for
AM654 SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 drivers/clk/keystone/Kconfig      |   8 ++
 drivers/clk/keystone/Makefile     |   1 +
 drivers/clk/keystone/syscon-clk.c | 172 ++++++++++++++++++++++++++++++
 3 files changed, 181 insertions(+)
 create mode 100644 drivers/clk/keystone/syscon-clk.c

diff --git a/drivers/clk/keystone/Kconfig b/drivers/clk/keystone/Kconfig
index 38aeefb1e808..6ba809c59bb2 100644
--- a/drivers/clk/keystone/Kconfig
+++ b/drivers/clk/keystone/Kconfig
@@ -26,3 +26,11 @@ config TI_SCI_CLK_PROBE_FROM_FW
 	  This is mostly only useful for debugging purposes, and will
 	  increase the boot time of the device. If you want the clocks probed
 	  from firmware, say Y. Otherwise, say N.
+
+config TI_SYSCON_CLK
+	tristate "Syscon based clock driver for K2/K3 SoCs"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	default (ARCH_KEYSTONE || ARCH_K3)
+	help
+	  This adds clock driver support for syscon based gate
+	  clocks on TI's K2 and K3 SoCs.
diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile
index d044de6f965c..0e426e648f7c 100644
--- a/drivers/clk/keystone/Makefile
+++ b/drivers/clk/keystone/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= pll.o gate.o
 obj-$(CONFIG_TI_SCI_CLK)		+= sci-clk.o
+obj-$(CONFIG_TI_SYSCON_CLK)		+= syscon-clk.o
diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c
new file mode 100644
index 000000000000..8d7dbea3bd30
--- /dev/null
+++ b/drivers/clk/keystone/syscon-clk.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct ti_syscon_gate_clk_priv {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u32 reg;
+	u32 idx;
+};
+
+struct ti_syscon_gate_clk_data {
+	char *name;
+	u32 offset;
+	u32 bit_idx;
+};
+
+static struct
+ti_syscon_gate_clk_priv *to_ti_syscon_gate_clk_priv(struct clk_hw *hw)
+{
+	return container_of(hw, struct ti_syscon_gate_clk_priv, hw);
+}
+
+static int ti_syscon_gate_clk_enable(struct clk_hw *hw)
+{
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	return regmap_write_bits(priv->regmap, priv->reg, priv->idx,
+				 priv->idx);
+}
+
+static void ti_syscon_gate_clk_disable(struct clk_hw *hw)
+{
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	regmap_write_bits(priv->regmap, priv->reg, priv->idx, 0);
+}
+
+static int ti_syscon_gate_clk_is_enabled(struct clk_hw *hw)
+{
+	unsigned int val;
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	regmap_read(priv->regmap, priv->reg, &val);
+
+	return !!(val & priv->idx);
+}
+
+static const struct clk_ops ti_syscon_gate_clk_ops = {
+	.enable		= ti_syscon_gate_clk_enable,
+	.disable	= ti_syscon_gate_clk_disable,
+	.is_enabled	= ti_syscon_gate_clk_is_enabled,
+};
+
+static struct clk_hw
+*ti_syscon_gate_clk_register(struct device *dev, struct regmap *regmap,
+			     const struct ti_syscon_gate_clk_data *data)
+{
+	struct ti_syscon_gate_clk_priv *priv;
+	struct clk_init_data init;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = data->name;
+	init.ops = &ti_syscon_gate_clk_ops;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	init.flags = 0;
+
+	priv->regmap = regmap;
+	priv->reg = data->offset;
+	priv->idx = BIT(data->bit_idx);
+	priv->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &priv->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &priv->hw;
+}
+
+static int ti_syscon_gate_clk_probe(struct platform_device *pdev)
+{
+	const struct ti_syscon_gate_clk_data *data, *p;
+	struct clk_hw_onecell_data *hw_data;
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int num_clks, i;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	regmap = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(regmap)) {
+		if (PTR_ERR(regmap) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(dev, "failed to find parent regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	num_clks = 0;
+	for (p = data; p->name; p++)
+		num_clks++;
+
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, num_clks),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	hw_data->num = num_clks;
+
+	for (i = 0; i < num_clks; i++) {
+		hw_data->hws[i] = ti_syscon_gate_clk_register(dev, regmap,
+							      &data[i]);
+		if (IS_ERR(hw_data->hws[i]))
+			dev_warn(dev, "failed to register %s\n",
+				 data[i].name);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   hw_data);
+}
+
+#define TI_SYSCON_CLK_GATE(_name, _offset, _bit_idx)	\
+	{						\
+		.name = _name,				\
+		.offset = (_offset),			\
+		.bit_idx = (_bit_idx),			\
+	}
+
+static const struct ti_syscon_gate_clk_data am654_clk_data[] = {
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk0", 0x0, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk1", 0x4, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk2", 0x8, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk3", 0xc, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk4", 0x10, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk5", 0x14, 0),
+	{ /* Sentinel */ },
+};
+
+static const struct of_device_id ti_syscon_gate_clk_ids[] = {
+	{
+		.compatible = "ti,am654-ehrpwm-tbclk",
+		.data = &am654_clk_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_syscon_gate_clk_ids);
+
+static struct platform_driver ti_syscon_gate_clk_driver = {
+	.probe = ti_syscon_gate_clk_probe,
+	.driver = {
+		.name = "ti-syscon-gate-clk",
+		.of_match_table = ti_syscon_gate_clk_ids,
+	},
+};
+module_platform_driver(ti_syscon_gate_clk_driver);
+
+MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>");
+MODULE_DESCRIPTION("Syscon backed gate-clock driver");
+MODULE_LICENSE("GPL");
-- 
2.25.0


      parent reply	other threads:[~2020-02-15 14:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-15 14:17 [PATCH v3 0/2] clk: keystone: Add new driver to handle ehrpwm tbclk Vignesh Raghavendra
2020-02-15 14:17 ` [PATCH v3 1/2] dt-bindings: clock: Add binding documentation for TI syscon gate clock Vignesh Raghavendra
2020-02-19  2:58   ` Rob Herring
2020-02-19  4:09     ` Vignesh Raghavendra
2020-02-15 14:17 ` Vignesh Raghavendra [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200215141724.32291-3-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).