From: Rob Herring <robh@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, soc@kernel.org,
Andre Przywara <andre.przywara@arm.com>,
Robert Richter <rrichter@marvell.com>, Jon Loeliger <jdl@jdl.com>,
Alexander Graf <graf@amazon.com>,
Matthias Brugger <mbrugger@suse.com>,
Mark Langsdorf <mlangsdo@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>,
Borislav Petkov <bp@alien8.de>, Cornelia Huck <cohuck@redhat.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
"David S. Miller" <davem@davemloft.net>,
devicetree@vger.kernel.org, Eric Auger <eric.auger@redhat.com>,
iommu@lists.linux-foundation.org,
James Morse <james.morse@arm.com>, Jens Axboe <axboe@kernel.dk>,
Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-edac@vger.kernel.org, linux-ide@vger.kernel.org,
linux-pm@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
netdev@vger.kernel.org, "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Robin Murphy <robin.murphy@arm.com>,
Stephen Boyd <sboyd@kernel.org>, Tony Luck <tony.luck@intel.com>,
Viresh Kumar <viresh.kumar@linaro.org>,
Will Deacon <will@kernel.org>
Subject: [RFC PATCH 10/11] ARM: dts: Remove Calxeda platforms
Date: Tue, 18 Feb 2020 11:13:20 -0600 [thread overview]
Message-ID: <20200218171321.30990-11-robh@kernel.org> (raw)
In-Reply-To: <20200218171321.30990-1-robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/arm/boot/dts/Makefile | 3 -
arch/arm/boot/dts/ecx-2000.dts | 103 -------------
arch/arm/boot/dts/ecx-common.dtsi | 230 ------------------------------
arch/arm/boot/dts/highbank.dts | 161 ---------------------
4 files changed, 497 deletions(-)
delete mode 100644 arch/arm/boot/dts/ecx-2000.dts
delete mode 100644 arch/arm/boot/dts/ecx-common.dtsi
delete mode 100644 arch/arm/boot/dts/highbank.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..a78da2e25966 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -224,9 +224,6 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
gemini-wbd222.dtb
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += \
- highbank.dtb \
- ecx-2000.dtb
dtb-$(CONFIG_ARCH_HIP01) += \
hip01-ca9x2.dtb
dtb-$(CONFIG_ARCH_HIP04) += \
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
deleted file mode 100644
index 5651ae6dc969..000000000000
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
- model = "Calxeda ECX-2000";
- compatible = "calxeda,ecx-2000";
- #address-cells = <2>;
- #size-cells = <2>;
- clock-ranges;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- };
-
- cpu@2 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <2>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- };
-
- cpu@3 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <3>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- };
- };
-
- memory@0 {
- name = "memory";
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
- };
-
- memory@200000000 {
- name = "memory";
- device_type = "memory";
- reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
- };
-
- soc {
- ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
-
- timer {
- compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
- };
-
- memory-controller@fff00000 {
- compatible = "calxeda,ecx-2000-ddr-ctrl";
- reg = <0xfff00000 0x1000>;
- interrupts = <0 91 4>;
- };
-
- intc: interrupt-controller@fff11000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- #size-cells = <0>;
- #address-cells = <1>;
- interrupt-controller;
- interrupts = <1 9 0xf04>;
- reg = <0xfff11000 0x1000>,
- <0xfff12000 0x2000>,
- <0xfff14000 0x2000>,
- <0xfff16000 0x2000>;
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
- };
- };
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
deleted file mode 100644
index 66ee1d34f72b..000000000000
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- */
-
-/ {
- chosen {
- bootargs = "console=ttyAMA0";
- };
-
- psci {
- compatible = "arm,psci";
- method = "smc";
- cpu_suspend = <0x84000002>;
- cpu_off = <0x84000004>;
- cpu_on = <0x84000006>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
-
- sata@ffe08000 {
- compatible = "calxeda,hb-ahci";
- reg = <0xffe08000 0x10000>;
- interrupts = <0 83 4>;
- dma-coherent;
- calxeda,port-phys = <&combophy5 0 &combophy0 0
- &combophy0 1 &combophy0 2
- &combophy0 3>;
- calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
- calxeda,led-order = <4 0 1 2 3>;
- };
-
- sdhci@ffe0e000 {
- compatible = "calxeda,hb-sdhci";
- reg = <0xffe0e000 0x1000>;
- interrupts = <0 90 4>;
- clocks = <&eclk>;
- status = "disabled";
- };
-
- ipc@fff20000 {
- compatible = "arm,pl320", "arm,primecell";
- reg = <0xfff20000 0x1000>;
- interrupts = <0 7 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- gpioe: gpio@fff30000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff30000 0x1000>;
- interrupts = <0 14 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- gpiof: gpio@fff31000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff31000 0x1000>;
- interrupts = <0 15 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- gpiog: gpio@fff32000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff32000 0x1000>;
- interrupts = <0 16 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- gpioh: gpio@fff33000 {
- #gpio-cells = <2>;
- compatible = "arm,pl061", "arm,primecell";
- gpio-controller;
- reg = <0xfff33000 0x1000>;
- interrupts = <0 17 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- status = "disabled";
- };
-
- timer@fff34000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0xfff34000 0x1000>;
- interrupts = <0 18 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- rtc@fff35000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0xfff35000 0x1000>;
- interrupts = <0 19 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- serial@fff36000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0xfff36000 0x1000>;
- interrupts = <0 20 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- smic@fff3a000 {
- compatible = "ipmi-smic";
- device_type = "ipmi";
- reg = <0xfff3a000 0x1000>;
- interrupts = <0 24 4>;
- reg-size = <4>;
- reg-spacing = <4>;
- };
-
- sregs@fff3c000 {
- compatible = "calxeda,hb-sregs";
- reg = <0xfff3c000 0x1000>;
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <33333000>;
- };
-
- ddrpll: ddrpll {
- #clock-cells = <0>;
- compatible = "calxeda,hb-pll-clock";
- clocks = <&osc>;
- reg = <0x108>;
- };
-
- a9pll: a9pll {
- #clock-cells = <0>;
- compatible = "calxeda,hb-pll-clock";
- clocks = <&osc>;
- reg = <0x100>;
- };
-
- a9periphclk: a9periphclk {
- #clock-cells = <0>;
- compatible = "calxeda,hb-a9periph-clock";
- clocks = <&a9pll>;
- reg = <0x104>;
- };
-
- a9bclk: a9bclk {
- #clock-cells = <0>;
- compatible = "calxeda,hb-a9bus-clock";
- clocks = <&a9pll>;
- reg = <0x104>;
- };
-
- emmcpll: emmcpll {
- #clock-cells = <0>;
- compatible = "calxeda,hb-pll-clock";
- clocks = <&osc>;
- reg = <0x10C>;
- };
-
- eclk: eclk {
- #clock-cells = <0>;
- compatible = "calxeda,hb-emmc-clock";
- clocks = <&emmcpll>;
- reg = <0x114>;
- };
-
- pclk: pclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- };
- };
- };
-
- dma@fff3d000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xfff3d000 0x1000>;
- interrupts = <0 92 4>;
- clocks = <&pclk>;
- clock-names = "apb_pclk";
- };
-
- ethernet@fff50000 {
- compatible = "calxeda,hb-xgmac";
- reg = <0xfff50000 0x1000>;
- interrupts = <0 77 4 0 78 4 0 79 4>;
- dma-coherent;
- };
-
- ethernet@fff51000 {
- compatible = "calxeda,hb-xgmac";
- reg = <0xfff51000 0x1000>;
- interrupts = <0 80 4 0 81 4 0 82 4>;
- dma-coherent;
- };
-
- combophy0: combo-phy@fff58000 {
- compatible = "calxeda,hb-combophy";
- #phy-cells = <1>;
- reg = <0xfff58000 0x1000>;
- phydev = <5>;
- };
-
- combophy5: combo-phy@fff5d000 {
- compatible = "calxeda,hb-combophy";
- #phy-cells = <1>;
- reg = <0xfff5d000 0x1000>;
- phydev = <31>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
deleted file mode 100644
index f4e4dca6f7e7..000000000000
--- a/arch/arm/boot/dts/highbank.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
- model = "Calxeda Highbank";
- compatible = "calxeda,highbank";
- #address-cells = <1>;
- #size-cells = <1>;
- clock-ranges;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@900 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <0x900>;
- next-level-cache = <&L2>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- operating-points = <
- /* kHz ignored */
- 1300000 1000000
- 1200000 1000000
- 1100000 1000000
- 800000 1000000
- 400000 1000000
- 200000 1000000
- >;
- clock-latency = <100000>;
- };
-
- cpu@901 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <0x901>;
- next-level-cache = <&L2>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- operating-points = <
- /* kHz ignored */
- 1300000 1000000
- 1200000 1000000
- 1100000 1000000
- 800000 1000000
- 400000 1000000
- 200000 1000000
- >;
- clock-latency = <100000>;
- };
-
- cpu@902 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <0x902>;
- next-level-cache = <&L2>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- operating-points = <
- /* kHz ignored */
- 1300000 1000000
- 1200000 1000000
- 1100000 1000000
- 800000 1000000
- 400000 1000000
- 200000 1000000
- >;
- clock-latency = <100000>;
- };
-
- cpu@903 {
- compatible = "arm,cortex-a9";
- device_type = "cpu";
- reg = <0x903>;
- next-level-cache = <&L2>;
- clocks = <&a9pll>;
- clock-names = "cpu";
- operating-points = <
- /* kHz ignored */
- 1300000 1000000
- 1200000 1000000
- 1100000 1000000
- 800000 1000000
- 400000 1000000
- 200000 1000000
- >;
- clock-latency = <100000>;
- };
- };
-
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x00000000 0xff900000>;
- };
-
- soc {
- ranges = <0x00000000 0x00000000 0xffffffff>;
-
- memory-controller@fff00000 {
- compatible = "calxeda,hb-ddr-ctrl";
- reg = <0xfff00000 0x1000>;
- interrupts = <0 91 4>;
- };
-
- timer@fff10600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0xfff10600 0x20>;
- interrupts = <1 13 0xf01>;
- clocks = <&a9periphclk>;
- };
-
- watchdog@fff10620 {
- compatible = "arm,cortex-a9-twd-wdt";
- reg = <0xfff10620 0x20>;
- interrupts = <1 14 0xf01>;
- clocks = <&a9periphclk>;
- };
-
- intc: interrupt-controller@fff11000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #size-cells = <0>;
- #address-cells = <1>;
- interrupt-controller;
- reg = <0xfff11000 0x1000>,
- <0xfff10100 0x100>;
- };
-
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0xfff12000 0x1000>;
- interrupts = <0 70 4>;
- cache-unified;
- cache-level = <2>;
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
- };
-
-
- sregs@fff3c200 {
- compatible = "calxeda,hb-sregs-l2-ecc";
- reg = <0xfff3c200 0x100>;
- interrupts = <0 71 4 0 72 4>;
- };
-
- };
-};
-
-/include/ "ecx-common.dtsi"
--
2.20.1
next prev parent reply other threads:[~2020-02-18 17:13 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-18 17:13 [RFC PATCH 00/11] Removing Calxeda platform support Rob Herring
2020-02-18 17:13 ` [RFC PATCH 01/11] vfio: Remove Calxeda XGMAC reset driver Rob Herring
2020-02-24 13:07 ` Auger Eric
2020-02-18 17:13 ` [RFC PATCH 02/11] ata: Remove Calxeda AHCI driver Rob Herring
2020-02-20 17:07 ` Mark Langsdorf
2020-02-18 17:13 ` [RFC PATCH 03/11] cpuidle: Remove Calxeda driver Rob Herring
2020-02-18 17:35 ` Daniel Lezcano
2020-02-18 17:13 ` [RFC PATCH 04/11] cpufreq: " Rob Herring
2020-02-19 1:49 ` Viresh Kumar
2020-02-20 17:06 ` Mark Langsdorf
2020-02-18 17:13 ` [RFC PATCH 05/11] EDAC: Remove Calxeda drivers Rob Herring
2020-02-18 17:33 ` Borislav Petkov
2020-02-19 11:57 ` Robert Richter
2020-02-18 17:13 ` [RFC PATCH 06/11] iommu: arm-smmu: Remove Calxeda secure mode quirk Rob Herring
2020-02-18 17:20 ` Will Deacon
2020-02-18 17:32 ` Robin Murphy
2020-02-25 22:01 ` Rob Herring
[not found] ` <20200228100446.GA2395@willie-the-truck>
2020-02-28 10:25 ` Andre Przywara
[not found] ` <20200228105024.GC2395@willie-the-truck>
2020-02-28 13:42 ` Andre Przywara
[not found] ` <20200228135645.GA4745@willie-the-truck>
2020-02-28 14:11 ` Andre Przywara
2020-02-18 17:13 ` [RFC PATCH 07/11] net: Remove Calxeda XGMAC driver Rob Herring
2020-02-18 17:13 ` [RFC PATCH 08/11] clk: Remove Calxeda driver Rob Herring
2020-02-18 17:13 ` [RFC PATCH 09/11] ARM: Remove Calxeda platform support Rob Herring
2020-02-18 17:13 ` Rob Herring [this message]
2020-02-18 17:13 ` [RFC PATCH 11/11] dt-bindings: Remove Calxeda platforms bindings Rob Herring
2020-02-18 17:22 ` Will Deacon
2020-02-18 17:30 ` Rob Herring
2020-02-18 18:13 ` [RFC PATCH 00/11] Removing Calxeda platform support Andre Przywara
2020-02-18 18:40 ` Rob Herring
2020-02-18 18:51 ` Florian Fainelli
2020-02-19 22:54 ` Olof Johansson
2020-02-20 1:38 ` André Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200218171321.30990-11-robh@kernel.org \
--to=robh@kernel.org \
--cc=alex.williamson@redhat.com \
--cc=andre.przywara@arm.com \
--cc=axboe@kernel.dk \
--cc=bp@alien8.de \
--cc=cohuck@redhat.com \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=eric.auger@redhat.com \
--cc=graf@amazon.com \
--cc=iommu@lists.linux-foundation.org \
--cc=james.morse@arm.com \
--cc=jdl@jdl.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mbrugger@suse.com \
--cc=mchehab@kernel.org \
--cc=mlangsdo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=robin.murphy@arm.com \
--cc=rrichter@marvell.com \
--cc=sboyd@kernel.org \
--cc=soc@kernel.org \
--cc=tony.luck@intel.com \
--cc=viresh.kumar@linaro.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).