linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family
@ 2020-02-19 12:59 Dan Murphy
  2020-02-19 12:59 ` [PATCH v3 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings Dan Murphy
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Dan Murphy @ 2020-02-19 12:59 UTC (permalink / raw)
  To: lgirdwood, broonie, perex, tiwai; +Cc: alsa-devel, linux-kernel, Dan Murphy

Hello

Introducing the Texas Instruments TLV320ADCx140 quad channel audio ADC.
This device supports 4 analog inputs, 8 digital inputs or a combination of
analog and digital microphones.

TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140
TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140
TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140

Dan Murphy (2):
  dt-bindings: sound: Add TLV320ADCx140 dt bindings
  ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family

 .../bindings/sound/tlv320adcx140.yaml         |  83 ++
 sound/soc/codecs/Kconfig                      |   9 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/tlv320adcx140.c              | 849 ++++++++++++++++++
 sound/soc/codecs/tlv320adcx140.h              | 130 +++
 5 files changed, 1073 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
 create mode 100644 sound/soc/codecs/tlv320adcx140.c
 create mode 100644 sound/soc/codecs/tlv320adcx140.h

-- 
2.25.0


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v3 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings
  2020-02-19 12:59 [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
@ 2020-02-19 12:59 ` Dan Murphy
  2020-02-19 12:59 ` [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family Dan Murphy
  2020-02-20 19:24 ` [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
  2 siblings, 0 replies; 10+ messages in thread
From: Dan Murphy @ 2020-02-19 12:59 UTC (permalink / raw)
  To: lgirdwood, broonie, perex, tiwai; +Cc: alsa-devel, linux-kernel, Dan Murphy

Add dt bindings for the TLV320ADCx140 Burr-Brown ADC.
The initial support is for the following:

TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140
TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140
TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v3 - No changes

 .../bindings/sound/tlv320adcx140.yaml         | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/tlv320adcx140.yaml

diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
new file mode 100644
index 000000000000..1433ff62b14f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
+  PDM microphones recording), high-performance audio, analog-to-digital
+  converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
+  family supports line and  microphone Inputs, and offers a programmable
+  microphone bias or supply voltage generation.
+
+  Specifications can be found at:
+    http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,tlv320adc3140
+      - const: ti,tlv320adc5140
+      - const: ti,tlv320adc6140
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  reset-gpios:
+    description: |
+       GPIO used for hardware reset.
+
+  areg-supply:
+      description: |
+       Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+       is enabled.
+
+  ti,mic-bias-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Mic bias is set to VREF
+       1 - Mic bias is set to VREF × 1.096
+       6 - Mic bias is set to AVDD
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 6]
+
+  ti,vref-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Set VREF to 2.75V
+       1 - Set VREF to 2.5V
+       2 - Set VREF to 1.375V
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      codec: codec@4c {
+        compatible = "ti,tlv320adc5140";
+        reg = <0x4c>;
+        ti,use-internal-areg;
+        ti,mic-bias-source = <6>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
-- 
2.25.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
  2020-02-19 12:59 [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
  2020-02-19 12:59 ` [PATCH v3 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings Dan Murphy
@ 2020-02-19 12:59 ` Dan Murphy
  2020-02-20 20:48   ` Mark Brown
  2020-02-26 11:18   ` Ricard Wanderlof
  2020-02-20 19:24 ` [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
  2 siblings, 2 replies; 10+ messages in thread
From: Dan Murphy @ 2020-02-19 12:59 UTC (permalink / raw)
  To: lgirdwood, broonie, perex, tiwai; +Cc: alsa-devel, linux-kernel, Dan Murphy

Add the tlv320adcx140 codec driver family.

The TLV320ADCx140 is a Burr-Brown™ highperformance, audio analog-to-digital
converter (ADC) that supports simultaneous sampling of up to four analog
channels or eight digital channels for the pulse density modulation (PDM)
microphone input. The device supports line and microphone inputs, and
allows for both single-ended and differential input configurations.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v3 - Moved regulator get to i2c probe and removed unlikely check in tdm_slot

 sound/soc/codecs/Kconfig         |   9 +
 sound/soc/codecs/Makefile        |   2 +
 sound/soc/codecs/tlv320adcx140.c | 849 +++++++++++++++++++++++++++++++
 sound/soc/codecs/tlv320adcx140.h | 130 +++++
 4 files changed, 990 insertions(+)
 create mode 100644 sound/soc/codecs/tlv320adcx140.c
 create mode 100644 sound/soc/codecs/tlv320adcx140.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 7e90f5d83097..69019402c21a 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -205,6 +205,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_TLV320AIC3X if I2C
 	select SND_SOC_TPA6130A2 if I2C
 	select SND_SOC_TLV320DAC33 if I2C
+	select SND_SOC_TLV320ADCX140 if I2C
 	select SND_SOC_TSCS42XX if I2C
 	select SND_SOC_TSCS454 if I2C
 	select SND_SOC_TS3A227E if I2C
@@ -1282,6 +1283,14 @@ config SND_SOC_TLV320AIC3X
 config SND_SOC_TLV320DAC33
 	tristate
 
+config SND_SOC_TLV320ADCX140
+	tristate "Texas Instruments TLV320ADCX140 CODEC family"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Add support for Texas Instruments tlv320adc3140, tlv320adc5140 and
+	  tlv320adc6140 quad channel ADCs.
+
 config SND_SOC_TS3A227E
 	tristate "TI Headset/Mic detect and keypress chip"
 	depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ba1b4b3fa2da..943ebc93fbc1 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -218,6 +218,7 @@ snd-soc-tlv320aic32x4-i2c-objs := tlv320aic32x4-i2c.o
 snd-soc-tlv320aic32x4-spi-objs := tlv320aic32x4-spi.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
 snd-soc-tlv320dac33-objs := tlv320dac33.o
+snd-soc-tlv320adcx140-objs := tlv320adcx140.o
 snd-soc-tscs42xx-objs := tscs42xx.o
 snd-soc-tscs454-objs := tscs454.o
 snd-soc-ts3a227e-objs := ts3a227e.o
@@ -516,6 +517,7 @@ obj-$(CONFIG_SND_SOC_TLV320AIC32X4_I2C)	+= snd-soc-tlv320aic32x4-i2c.o
 obj-$(CONFIG_SND_SOC_TLV320AIC32X4_SPI)	+= snd-soc-tlv320aic32x4-spi.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
 obj-$(CONFIG_SND_SOC_TLV320DAC33)	+= snd-soc-tlv320dac33.o
+obj-$(CONFIG_SND_SOC_TLV320ADCX140)	+= snd-soc-tlv320adcx140.o
 obj-$(CONFIG_SND_SOC_TSCS42XX)	+= snd-soc-tscs42xx.o
 obj-$(CONFIG_SND_SOC_TSCS454)	+= snd-soc-tscs454.o
 obj-$(CONFIG_SND_SOC_TS3A227E)	+= snd-soc-ts3a227e.o
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
new file mode 100644
index 000000000000..8182c584de9c
--- /dev/null
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0
+// TLV320ADCX140 Sound driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "tlv320adcx140.h"
+
+struct adcx140_priv {
+	struct snd_soc_component *component;
+	struct regulator *supply_areg;
+	struct gpio_desc *gpio_reset;
+	struct regmap *regmap;
+	struct device *dev;
+
+	int micbias_vg;
+
+	unsigned int dai_fmt;
+	unsigned int tdm_delay;
+	unsigned int slot_width;
+};
+
+static const struct reg_default adcx140_reg_defaults[] = {
+	{ ADCX140_PAGE_SELECT, 0x00 },
+	{ ADCX140_SW_RESET, 0x00 },
+	{ ADCX140_SLEEP_CFG, 0x00 },
+	{ ADCX140_SHDN_CFG, 0x05 },
+	{ ADCX140_ASI_CFG0, 0x30 },
+	{ ADCX140_ASI_CFG1, 0x00 },
+	{ ADCX140_ASI_CFG2, 0x00 },
+	{ ADCX140_ASI_CH1, 0x00 },
+	{ ADCX140_ASI_CH2, 0x01 },
+	{ ADCX140_ASI_CH3, 0x02 },
+	{ ADCX140_ASI_CH4, 0x03 },
+	{ ADCX140_ASI_CH5, 0x04 },
+	{ ADCX140_ASI_CH6, 0x05 },
+	{ ADCX140_ASI_CH7, 0x06 },
+	{ ADCX140_ASI_CH8, 0x07 },
+	{ ADCX140_MST_CFG0, 0x02 },
+	{ ADCX140_MST_CFG1, 0x48 },
+	{ ADCX140_ASI_STS, 0xff },
+	{ ADCX140_CLK_SRC, 0x10 },
+	{ ADCX140_PDMCLK_CFG, 0x40 },
+	{ ADCX140_PDM_CFG, 0x00 },
+	{ ADCX140_GPIO_CFG0, 0x22 },
+	{ ADCX140_GPO_CFG1, 0x00 },
+	{ ADCX140_GPO_CFG2, 0x00 },
+	{ ADCX140_GPO_CFG3, 0x00 },
+	{ ADCX140_GPO_CFG4, 0x00 },
+	{ ADCX140_GPO_VAL, 0x00 },
+	{ ADCX140_GPIO_MON, 0x00 },
+	{ ADCX140_GPI_CFG0, 0x00 },
+	{ ADCX140_GPI_CFG1, 0x00 },
+	{ ADCX140_GPI_MON, 0x00 },
+	{ ADCX140_INT_CFG, 0x00 },
+	{ ADCX140_INT_MASK0, 0xff },
+	{ ADCX140_INT_LTCH0, 0x00 },
+	{ ADCX140_BIAS_CFG, 0x00 },
+	{ ADCX140_CH1_CFG0, 0x00 },
+	{ ADCX140_CH1_CFG1, 0x00 },
+	{ ADCX140_CH1_CFG2, 0xc9 },
+	{ ADCX140_CH1_CFG3, 0x80 },
+	{ ADCX140_CH1_CFG4, 0x00 },
+	{ ADCX140_CH2_CFG0, 0x00 },
+	{ ADCX140_CH2_CFG1, 0x00 },
+	{ ADCX140_CH2_CFG2, 0xc9 },
+	{ ADCX140_CH2_CFG3, 0x80 },
+	{ ADCX140_CH2_CFG4, 0x00 },
+	{ ADCX140_CH3_CFG0, 0x00 },
+	{ ADCX140_CH3_CFG1, 0x00 },
+	{ ADCX140_CH3_CFG2, 0xc9 },
+	{ ADCX140_CH3_CFG3, 0x80 },
+	{ ADCX140_CH3_CFG4, 0x00 },
+	{ ADCX140_CH4_CFG0, 0x00 },
+	{ ADCX140_CH4_CFG1, 0x00 },
+	{ ADCX140_CH4_CFG2, 0xc9 },
+	{ ADCX140_CH4_CFG3, 0x80 },
+	{ ADCX140_CH4_CFG4, 0x00 },
+	{ ADCX140_CH5_CFG2, 0xc9 },
+	{ ADCX140_CH5_CFG3, 0x80 },
+	{ ADCX140_CH5_CFG4, 0x00 },
+	{ ADCX140_CH6_CFG2, 0xc9 },
+	{ ADCX140_CH6_CFG3, 0x80 },
+	{ ADCX140_CH6_CFG4, 0x00 },
+	{ ADCX140_CH7_CFG2, 0xc9 },
+	{ ADCX140_CH7_CFG3, 0x80 },
+	{ ADCX140_CH7_CFG4, 0x00 },
+	{ ADCX140_CH8_CFG2, 0xc9 },
+	{ ADCX140_CH8_CFG3, 0x80 },
+	{ ADCX140_CH8_CFG4, 0x00 },
+	{ ADCX140_DSP_CFG0, 0x01 },
+	{ ADCX140_DSP_CFG1, 0x40 },
+	{ ADCX140_DRE_CFG0, 0x7b },
+	{ ADCX140_IN_CH_EN, 0xf0 },
+	{ ADCX140_ASI_OUT_CH_EN, 0x00 },
+	{ ADCX140_PWR_CFG, 0x00 },
+	{ ADCX140_DEV_STS0, 0x00 },
+	{ ADCX140_DEV_STS1, 0x80 },
+};
+
+static const struct regmap_range_cfg adcx140_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 12 * 128,
+		.selector_reg = ADCX140_PAGE_SELECT,
+		.selector_mask = 0xff,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 128,
+	},
+};
+
+static bool adcx140_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADCX140_SW_RESET:
+	case ADCX140_DEV_STS0:
+	case ADCX140_DEV_STS1:
+	case ADCX140_ASI_STS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config adcx140_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_defaults = adcx140_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(adcx140_reg_defaults),
+	.cache_type = REGCACHE_FLAT,
+	.ranges = adcx140_ranges,
+	.num_ranges = ARRAY_SIZE(adcx140_ranges),
+	.max_register = 12 * 128,
+	.volatile_reg = adcx140_volatile,
+};
+
+/* Digital Volume control. From -100 to 27 dB in 0.5 dB steps */
+static DECLARE_TLV_DB_SCALE(dig_vol_tlv, -10000, 50, 0);
+
+/* ADC gain. From 0 to 42 dB in 1 dB steps */
+static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 100, 0);
+
+static const char * const resistor_text[] = {
+	"2.5 kOhm", "10 kOhm", "20 kOhm"
+};
+
+static SOC_ENUM_SINGLE_DECL(in1_resistor_enum, ADCX140_CH1_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in2_resistor_enum, ADCX140_CH2_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in3_resistor_enum, ADCX140_CH3_CFG0, 2,
+			    resistor_text);
+static SOC_ENUM_SINGLE_DECL(in4_resistor_enum, ADCX140_CH4_CFG0, 2,
+			    resistor_text);
+
+static const struct snd_kcontrol_new in1_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH1 Resistor Select", in1_resistor_enum),
+};
+static const struct snd_kcontrol_new in2_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH2 Resistor Select", in2_resistor_enum),
+};
+static const struct snd_kcontrol_new in3_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH3 Resistor Select", in3_resistor_enum),
+};
+static const struct snd_kcontrol_new in4_resistor_controls[] = {
+	SOC_DAPM_ENUM("CH4 Resistor Select", in4_resistor_enum),
+};
+
+/* Analog/Digital Selection */
+static const char *adcx140_mic_sel_text[] = {"Analog", "Line In", "Digital"};
+static const char *adcx140_analog_sel_text[] = {"Analog", "Line In"};
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1p_enum,
+			    ADCX140_CH1_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1p_control =
+SOC_DAPM_ENUM("MIC1P MUX", adcx140_mic1p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1_analog_enum,
+			    ADCX140_CH1_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1_analog_control =
+SOC_DAPM_ENUM("MIC1 Analog MUX", adcx140_mic1_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic1m_enum,
+			    ADCX140_CH1_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic1m_control =
+SOC_DAPM_ENUM("MIC1M MUX", adcx140_mic1m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2p_enum,
+			    ADCX140_CH2_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2p_control =
+SOC_DAPM_ENUM("MIC2P MUX", adcx140_mic2p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2_analog_enum,
+			    ADCX140_CH2_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2_analog_control =
+SOC_DAPM_ENUM("MIC2 Analog MUX", adcx140_mic2_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic2m_enum,
+			    ADCX140_CH2_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic2m_control =
+SOC_DAPM_ENUM("MIC2M MUX", adcx140_mic2m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3p_enum,
+			    ADCX140_CH3_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3p_control =
+SOC_DAPM_ENUM("MIC3P MUX", adcx140_mic3p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3_analog_enum,
+			    ADCX140_CH3_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3_analog_control =
+SOC_DAPM_ENUM("MIC3 Analog MUX", adcx140_mic3_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic3m_enum,
+			    ADCX140_CH3_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic3m_control =
+SOC_DAPM_ENUM("MIC3M MUX", adcx140_mic3m_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4p_enum,
+			    ADCX140_CH4_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4p_control =
+SOC_DAPM_ENUM("MIC4P MUX", adcx140_mic4p_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4_analog_enum,
+			    ADCX140_CH4_CFG0, 7,
+			    adcx140_analog_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4_analog_control =
+SOC_DAPM_ENUM("MIC4 Analog MUX", adcx140_mic4_analog_enum);
+
+static SOC_ENUM_SINGLE_DECL(adcx140_mic4m_enum,
+			    ADCX140_CH4_CFG0, 5,
+			    adcx140_mic_sel_text);
+
+static const struct snd_kcontrol_new adcx140_dapm_mic4m_control =
+SOC_DAPM_ENUM("MIC4M MUX", adcx140_mic4m_enum);
+
+static const struct snd_kcontrol_new adcx140_dapm_ch1_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 7, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch2_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 6, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch3_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 5, 1, 0);
+static const struct snd_kcontrol_new adcx140_dapm_ch4_en_switch =
+	SOC_DAPM_SINGLE("Switch", ADCX140_ASI_OUT_CH_EN, 4, 1, 0);
+
+/* Output Mixer */
+static const struct snd_kcontrol_new adcx140_output_mixer_controls[] = {
+	SOC_DAPM_SINGLE("Digital CH1 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH2 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH3 Switch", 0, 0, 0, 0),
+	SOC_DAPM_SINGLE("Digital CH4 Switch", 0, 0, 0, 0),
+};
+
+static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = {
+	/* Analog Differential Inputs */
+	SND_SOC_DAPM_INPUT("MIC1P"),
+	SND_SOC_DAPM_INPUT("MIC1M"),
+	SND_SOC_DAPM_INPUT("MIC2P"),
+	SND_SOC_DAPM_INPUT("MIC2M"),
+	SND_SOC_DAPM_INPUT("MIC3P"),
+	SND_SOC_DAPM_INPUT("MIC3M"),
+	SND_SOC_DAPM_INPUT("MIC4P"),
+	SND_SOC_DAPM_INPUT("MIC4M"),
+
+	SND_SOC_DAPM_OUTPUT("CH1_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH2_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH3_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH4_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH5_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH6_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH7_OUT"),
+	SND_SOC_DAPM_OUTPUT("CH8_OUT"),
+
+	SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0,
+		&adcx140_output_mixer_controls[0],
+		ARRAY_SIZE(adcx140_output_mixer_controls)),
+
+	/* Input Selection to MIC_PGA */
+	SND_SOC_DAPM_MUX("MIC1P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1p_control),
+	SND_SOC_DAPM_MUX("MIC2P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2p_control),
+	SND_SOC_DAPM_MUX("MIC3P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3p_control),
+	SND_SOC_DAPM_MUX("MIC4P Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4p_control),
+
+	/* Input Selection to MIC_PGA */
+	SND_SOC_DAPM_MUX("MIC1 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1_analog_control),
+	SND_SOC_DAPM_MUX("MIC2 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2_analog_control),
+	SND_SOC_DAPM_MUX("MIC3 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3_analog_control),
+	SND_SOC_DAPM_MUX("MIC4 Analog Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4_analog_control),
+
+	SND_SOC_DAPM_MUX("MIC1M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic1m_control),
+	SND_SOC_DAPM_MUX("MIC2M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic2m_control),
+	SND_SOC_DAPM_MUX("MIC3M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic3m_control),
+	SND_SOC_DAPM_MUX("MIC4M Input Mux", SND_SOC_NOPM, 0, 0,
+			 &adcx140_dapm_mic4m_control),
+
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH1", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH2", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH3", SND_SOC_NOPM, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("MIC_GAIN_CTL_CH4", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_ADC("CH1_ADC", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0),
+	SND_SOC_DAPM_ADC("CH2_ADC", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0),
+	SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0),
+	SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0),
+
+	SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch1_en_switch),
+	SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch2_en_switch),
+	SND_SOC_DAPM_SWITCH("CH3_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch3_en_switch),
+	SND_SOC_DAPM_SWITCH("CH4_ASI_EN", SND_SOC_NOPM, 0, 0,
+			    &adcx140_dapm_ch4_en_switch),
+
+	SND_SOC_DAPM_MUX("IN1 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in1_resistor_controls),
+	SND_SOC_DAPM_MUX("IN2 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in2_resistor_controls),
+	SND_SOC_DAPM_MUX("IN3 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in3_resistor_controls),
+	SND_SOC_DAPM_MUX("IN4 Analog Mic Resistor", SND_SOC_NOPM, 0, 0,
+			in4_resistor_controls),
+};
+
+static const struct snd_soc_dapm_route adcx140_audio_map[] = {
+	/* Outputs */
+	{"CH1_OUT", NULL, "Output Mixer"},
+	{"CH2_OUT", NULL, "Output Mixer"},
+	{"CH3_OUT", NULL, "Output Mixer"},
+	{"CH4_OUT", NULL, "Output Mixer"},
+
+	{"CH1_ASI_EN", "Switch", "CH1_ADC"},
+	{"CH2_ASI_EN", "Switch", "CH2_ADC"},
+	{"CH3_ASI_EN", "Switch", "CH3_ADC"},
+	{"CH4_ASI_EN", "Switch", "CH4_ADC"},
+
+	/* Mic input */
+	{"CH1_ADC", NULL, "MIC_GAIN_CTL_CH1"},
+	{"CH2_ADC", NULL, "MIC_GAIN_CTL_CH2"},
+	{"CH3_ADC", NULL, "MIC_GAIN_CTL_CH3"},
+	{"CH4_ADC", NULL, "MIC_GAIN_CTL_CH4"},
+
+	{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH1", NULL, "IN1 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH2", NULL, "IN2 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH3", NULL, "IN3 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
+	{"MIC_GAIN_CTL_CH4", NULL, "IN4 Analog Mic Resistor"},
+
+	{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1P Input Mux"},
+	{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1P Input Mux"},
+	{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1P Input Mux"},
+
+	{"IN1 Analog Mic Resistor", "2.5 kOhm", "MIC1M Input Mux"},
+	{"IN1 Analog Mic Resistor", "10 kOhm", "MIC1M Input Mux"},
+	{"IN1 Analog Mic Resistor", "20 kOhm", "MIC1M Input Mux"},
+
+	{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2P Input Mux"},
+	{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2P Input Mux"},
+	{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2P Input Mux"},
+
+	{"IN2 Analog Mic Resistor", "2.5 kOhm", "MIC2M Input Mux"},
+	{"IN2 Analog Mic Resistor", "10 kOhm", "MIC2M Input Mux"},
+	{"IN2 Analog Mic Resistor", "20 kOhm", "MIC2M Input Mux"},
+
+	{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3P Input Mux"},
+	{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3P Input Mux"},
+	{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3P Input Mux"},
+
+	{"IN3 Analog Mic Resistor", "2.5 kOhm", "MIC3M Input Mux"},
+	{"IN3 Analog Mic Resistor", "10 kOhm", "MIC3M Input Mux"},
+	{"IN3 Analog Mic Resistor", "20 kOhm", "MIC3M Input Mux"},
+
+	{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4P Input Mux"},
+	{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4P Input Mux"},
+	{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4P Input Mux"},
+
+	{"IN4 Analog Mic Resistor", "2.5 kOhm", "MIC4M Input Mux"},
+	{"IN4 Analog Mic Resistor", "10 kOhm", "MIC4M Input Mux"},
+	{"IN4 Analog Mic Resistor", "20 kOhm", "MIC4M Input Mux"},
+
+	{"MIC1 Analog Mux", "Line In", "MIC1P"},
+	{"MIC2 Analog Mux", "Line In", "MIC2P"},
+	{"MIC3 Analog Mux", "Line In", "MIC3P"},
+	{"MIC4 Analog Mux", "Line In", "MIC4P"},
+
+	{"MIC1P Input Mux", "Analog", "MIC1P"},
+	{"MIC1M Input Mux", "Analog", "MIC1M"},
+	{"MIC2P Input Mux", "Analog", "MIC2P"},
+	{"MIC2M Input Mux", "Analog", "MIC2M"},
+	{"MIC3P Input Mux", "Analog", "MIC3P"},
+	{"MIC3M Input Mux", "Analog", "MIC3M"},
+	{"MIC4P Input Mux", "Analog", "MIC4P"},
+	{"MIC4M Input Mux", "Analog", "MIC4M"},
+};
+
+static const struct snd_kcontrol_new adcx140_snd_controls[] = {
+	SOC_SINGLE_TLV("Analog CH1 Mic Gain Volume", ADCX140_CH1_CFG1, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH2 Mic Gain Volume", ADCX140_CH1_CFG2, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH3 Mic Gain Volume", ADCX140_CH1_CFG3, 2, 42, 0,
+			adc_tlv),
+	SOC_SINGLE_TLV("Analog CH4 Mic Gain Volume", ADCX140_CH1_CFG4, 2, 42, 0,
+			adc_tlv),
+
+	SOC_SINGLE_TLV("Digital CH1 Out Volume", ADCX140_CH1_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH2 Out Volume", ADCX140_CH2_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH3 Out Volume", ADCX140_CH3_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH4 Out Volume", ADCX140_CH4_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH5 Out Volume", ADCX140_CH5_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH6 Out Volume", ADCX140_CH6_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH7 Out Volume", ADCX140_CH7_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+	SOC_SINGLE_TLV("Digital CH8 Out Volume", ADCX140_CH8_CFG2,
+			0, 0xff, 0, dig_vol_tlv),
+};
+
+static int adcx140_reset(struct adcx140_priv *adcx140)
+{
+	int ret = 0;
+
+	if (adcx140->gpio_reset) {
+		gpiod_direction_output(adcx140->gpio_reset, 0);
+		/* 8.4.1: wait for hw shutdown (25ms) + >= 1ms */
+		usleep_range(30000, 100000);
+		gpiod_direction_output(adcx140->gpio_reset, 1);
+	} else {
+		ret = regmap_write(adcx140->regmap, ADCX140_SW_RESET,
+		          ADCX140_RESET);
+	}
+
+	/* 8.4.2: wait >= 10 ms after entering sleep mode. */
+	usleep_range(10000, 100000);
+
+	return 0;
+}
+
+static int adcx140_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	u8 data = 0;
+
+	switch (params_width(params)) {
+	case 16:
+		data = ADCX140_16_BIT_WORD;
+		break;
+	case 20:
+		data = ADCX140_20_BIT_WORD;
+		break;
+	case 24:
+		data = ADCX140_24_BIT_WORD;
+		break;
+	case 32:
+		data = ADCX140_32_BIT_WORD;
+		break;
+	default:
+		dev_err(component->dev, "%s: Unsupported width %d\n",
+			__func__, params_width(params));
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
+			    ADCX140_WORD_LEN_MSK, data);
+
+	return 0;
+}
+
+static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			       unsigned int fmt)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	u8 iface_reg1 = 0;
+	u8 iface_reg2 = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+	default:
+		dev_err(component->dev, "Invalid DAI master/slave interface\n");
+		return -EINVAL;
+	}
+
+	/* signal polarity */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_IF:
+		iface_reg1 |= ADCX140_FSYNCINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface_reg1 |= ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface_reg1 |= ADCX140_BCLKINV_BIT;
+		break;
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI clock signal polarity\n");
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface_reg1 |= ADCX140_I2S_MODE_BIT;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface_reg1 |= ADCX140_LEFT_JUST_BIT;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		break;
+	default:
+		dev_err(component->dev, "Invalid DAI interface format\n");
+		return -EINVAL;
+	}
+
+	adcx140->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG0,
+				      ADCX140_FSYNCINV_BIT |
+				      ADCX140_BCLKINV_BIT |
+				      ADCX140_ASI_FORMAT_MSK,
+				      iface_reg1);
+	snd_soc_component_update_bits(component, ADCX140_MST_CFG0,
+				      ADCX140_BCLK_FSYNC_MASTER, iface_reg2);
+
+	return 0;
+}
+
+static int adcx140_set_dai_tdm_slot(struct snd_soc_dai *codec_dai,
+				  unsigned int tx_mask, unsigned int rx_mask,
+				  int slots, int slot_width)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	unsigned int lsb;
+
+	if (tx_mask != rx_mask) {
+		dev_err(component->dev, "tx and rx masks must be symmetric\n");
+		return -EINVAL;
+	}
+
+	/* TDM based on DSP mode requires slots to be adjacent */
+	lsb = __ffs(tx_mask);
+	if ((lsb + 1) != __fls(tx_mask)) {
+		dev_err(component->dev, "Invalid mask, slots must be adjacent\n");
+		return -EINVAL;
+	}
+
+	switch (slot_width) {
+	case 16:
+	case 20:
+	case 24:
+	case 32:
+		break;
+	default:
+		dev_err(component->dev, "Unsupported slot width %d\n", slot_width);
+		return -EINVAL;
+	}
+
+	adcx140->tdm_delay = lsb;
+	adcx140->slot_width = slot_width;
+
+	return 0;
+}
+
+static int adcx140_prepare(struct snd_pcm_substream *substream,
+			 struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int offset = 0;
+	int width = adcx140->slot_width;
+
+	if (!width)
+		width = substream->runtime->sample_bits;
+
+	/* TDM slot selection only valid in DSP_A/_B mode */
+	if (adcx140->dai_fmt == SND_SOC_DAIFMT_DSP_A)
+		offset += (adcx140->tdm_delay * width + 1);
+	else if (adcx140->dai_fmt == SND_SOC_DAIFMT_DSP_B)
+		offset += adcx140->tdm_delay * width;
+
+	/* Configure data offset */
+	snd_soc_component_update_bits(component, ADCX140_ASI_CFG1,
+				      ADCX140_TX_OFFSET_MASK, offset);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops adcx140_dai_ops = {
+	.hw_params	= adcx140_hw_params,
+	.set_fmt	= adcx140_set_dai_fmt,
+	.prepare	= adcx140_prepare,
+	.set_tdm_slot	= adcx140_set_dai_tdm_slot,
+};
+
+static int adcx140_codec_probe(struct snd_soc_component *component)
+{
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int sleep_cfg_val = ADCX140_WAKE_DEV;
+	u8 bias_source;
+	u8 vref_source;
+	int ret;
+
+	ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source",
+				      &bias_source);
+	if (ret)
+		bias_source = ADCX140_MIC_BIAS_VAL_VREF;
+
+	if (bias_source != ADCX140_MIC_BIAS_VAL_VREF &&
+	    bias_source != ADCX140_MIC_BIAS_VAL_VREF_1096 &&
+	    bias_source != ADCX140_MIC_BIAS_VAL_AVDD) {
+		dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u8(adcx140->dev, "ti,vref-source",
+				      &vref_source);
+	if (ret)
+		vref_source = ADCX140_MIC_BIAS_VREF_275V;
+
+	if (vref_source != ADCX140_MIC_BIAS_VREF_275V &&
+	    vref_source != ADCX140_MIC_BIAS_VREF_25V &&
+	    vref_source != ADCX140_MIC_BIAS_VREF_1375V) {
+		dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
+		return -EINVAL;
+	}
+
+	bias_source |= vref_source;
+
+	ret = adcx140_reset(adcx140);
+	if (ret)
+		goto out;
+
+	if(adcx140->supply_areg == NULL)
+		sleep_cfg_val |= ADCX140_AREG_INTERNAL;
+
+	ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val);
+	if (ret) {
+		dev_err(adcx140->dev, "setting sleep config failed %d\n", ret);
+		goto out;
+	}
+
+	/* 8.4.3: Wait >= 1ms after entering active mode. */
+	usleep_range(1000, 100000);
+
+	ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG,
+				ADCX140_MIC_BIAS_VAL_MSK |
+				ADCX140_MIC_BIAS_VREF_MSK, bias_source);
+	if (ret)
+		dev_err(adcx140->dev, "setting MIC bias failed %d\n", ret);
+out:
+	return ret;
+}
+
+static int adcx140_set_bias_level(struct snd_soc_component *component,
+				  enum snd_soc_bias_level level)
+{
+	struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
+	int pwr_cfg = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+	case SND_SOC_BIAS_STANDBY:
+		pwr_cfg = ADCX140_PWR_CFG_BIAS_PDZ | ADCX140_PWR_CFG_PLL_PDZ |
+			  ADCX140_PWR_CFG_ADC_PDZ;
+		break;
+	case SND_SOC_BIAS_OFF:
+		pwr_cfg = 0x0;
+		break;
+	}
+
+	return regmap_write(adcx140->regmap, ADCX140_PWR_CFG, pwr_cfg);
+}
+
+static const struct snd_soc_component_driver soc_codec_driver_adcx140 = {
+	.probe			= adcx140_codec_probe,
+	.set_bias_level		= adcx140_set_bias_level,
+	.controls		= adcx140_snd_controls,
+	.num_controls		= ARRAY_SIZE(adcx140_snd_controls),
+	.dapm_widgets		= adcx140_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(adcx140_dapm_widgets),
+	.dapm_routes		= adcx140_audio_map,
+	.num_dapm_routes	= ARRAY_SIZE(adcx140_audio_map),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 0,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
+static struct snd_soc_dai_driver adcx140_dai_driver[] = {
+	{
+		.name = "tlv320adcx140-codec",
+		.capture = {
+			.stream_name	 = "Capture",
+			.channels_min	 = 2,
+			.channels_max	 = ADCX140_MAX_CHANNELS,
+			.rates		 = ADCX140_RATES,
+			.formats	 = ADCX140_FORMATS,
+		},
+		.ops = &adcx140_dai_ops,
+		.symmetric_rates = 1,
+	}
+};
+
+static const struct of_device_id tlv320adcx140_of_match[] = {
+	{ .compatible = "ti,tlv320adc3140" },
+	{ .compatible = "ti,tlv320adc5140" },
+	{ .compatible = "ti,tlv320adc6140" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tlv320adcx140_of_match);
+
+static int adcx140_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct adcx140_priv *adcx140;
+	int ret;
+
+	adcx140 = devm_kzalloc(&i2c->dev, sizeof(*adcx140), GFP_KERNEL);
+	if (!adcx140)
+		return -ENOMEM;
+
+	adcx140->gpio_reset = devm_gpiod_get_optional(adcx140->dev,
+						      "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(adcx140->gpio_reset))
+		dev_info(&i2c->dev, "Reset GPIO not defined\n");
+
+	adcx140->supply_areg = devm_regulator_get_optional(adcx140->dev,
+							   "areg");
+	if (IS_ERR(adcx140->supply_areg)) {
+		if (PTR_ERR(adcx140->supply_areg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		else
+			adcx140->supply_areg = NULL;
+	} else {
+		ret = regulator_enable(adcx140->supply_areg);
+		if (ret) {
+			dev_err(adcx140->dev, "Failed to enable areg\n");
+			return ret;
+		}
+	}
+
+	adcx140->regmap = devm_regmap_init_i2c(i2c, &adcx140_i2c_regmap);
+	if (IS_ERR(adcx140->regmap)) {
+		ret = PTR_ERR(adcx140->regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+	adcx140->dev = &i2c->dev;
+	i2c_set_clientdata(i2c, adcx140);
+
+	return devm_snd_soc_register_component(&i2c->dev,
+					       &soc_codec_driver_adcx140,
+					       adcx140_dai_driver, 1);
+}
+
+static const struct i2c_device_id adcx140_i2c_id[] = {
+	{ "tlv320adc3140", 0 },
+	{ "tlv320adc5140", 1 },
+	{ "tlv320adc6140", 2 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adcx140_i2c_id);
+
+static struct i2c_driver adcx140_i2c_driver = {
+	.driver = {
+		.name	= "tlv320adcx140-codec",
+		.of_match_table = of_match_ptr(tlv320adcx140_of_match),
+	},
+	.probe		= adcx140_i2c_probe,
+	.id_table	= adcx140_i2c_id,
+};
+module_i2c_driver(adcx140_i2c_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_DESCRIPTION("ASoC TLV320ADCX140 CODEC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/tlv320adcx140.h b/sound/soc/codecs/tlv320adcx140.h
new file mode 100644
index 000000000000..66b1c3b33f1e
--- /dev/null
+++ b/sound/soc/codecs/tlv320adcx140.h
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+// TLV320ADCX104 Sound driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#ifndef _TLV320ADCX140_H
+#define _TLV320ADCX140_H
+
+#define ADCX140_RATES	(SNDRV_PCM_RATE_44100 | \
+			 SNDRV_PCM_RATE_48000)
+
+#define ADCX140_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | \
+			 SNDRV_PCM_FMTBIT_S20_3LE | \
+			 SNDRV_PCM_FMTBIT_S24_3LE | \
+			 SNDRV_PCM_FMTBIT_S24_LE | \
+			 SNDRV_PCM_FMTBIT_S32_LE)
+
+#define ADCX140_PAGE_SELECT	0x00
+#define ADCX140_SW_RESET	0x01
+#define ADCX140_SLEEP_CFG 	0x02
+#define ADCX140_SHDN_CFG	0x05
+#define ADCX140_ASI_CFG0	0x07
+#define ADCX140_ASI_CFG1	0x08
+#define ADCX140_ASI_CFG2	0x09
+#define ADCX140_ASI_CH1		0x0b
+#define ADCX140_ASI_CH2		0x0c
+#define ADCX140_ASI_CH3		0x0d
+#define ADCX140_ASI_CH4		0x0e
+#define ADCX140_ASI_CH5		0x0f
+#define ADCX140_ASI_CH6		0x10
+#define ADCX140_ASI_CH7		0x11
+#define ADCX140_ASI_CH8		0x12
+#define ADCX140_MST_CFG0	0x13
+#define ADCX140_MST_CFG1	0x14
+#define ADCX140_ASI_STS		0x15
+#define ADCX140_CLK_SRC		0x16
+#define ADCX140_PDMCLK_CFG	0x1f
+#define ADCX140_PDM_CFG		0x20
+#define ADCX140_GPIO_CFG0	0x21
+#define ADCX140_GPO_CFG1	0x22
+#define ADCX140_GPO_CFG2	0x23
+#define ADCX140_GPO_CFG3	0x24
+#define ADCX140_GPO_CFG4	0x25
+#define ADCX140_GPO_VAL		0x29
+#define ADCX140_GPIO_MON	0x2a
+#define ADCX140_GPI_CFG0	0x2b
+#define ADCX140_GPI_CFG1	0x2c
+#define ADCX140_GPI_MON		0x2f
+#define ADCX140_INT_CFG		0x32
+#define ADCX140_INT_MASK0	0x33
+#define ADCX140_INT_LTCH0	0x36
+#define ADCX140_BIAS_CFG	0x3b
+#define ADCX140_CH1_CFG0	0x3c
+#define ADCX140_CH1_CFG1	0x3d
+#define ADCX140_CH1_CFG2	0x3e
+#define ADCX140_CH1_CFG3	0x3f
+#define ADCX140_CH1_CFG4	0x40
+#define ADCX140_CH2_CFG0	0x41
+#define ADCX140_CH2_CFG1	0x42
+#define ADCX140_CH2_CFG2	0x43
+#define ADCX140_CH2_CFG3	0x44
+#define ADCX140_CH2_CFG4	0x45
+#define ADCX140_CH3_CFG0	0x46
+#define ADCX140_CH3_CFG1	0x47
+#define ADCX140_CH3_CFG2	0x48
+#define ADCX140_CH3_CFG3	0x49
+#define ADCX140_CH3_CFG4 	0x4a
+#define ADCX140_CH4_CFG0	0x4b
+#define ADCX140_CH4_CFG1	0x4c
+#define ADCX140_CH4_CFG2	0x4d
+#define ADCX140_CH4_CFG3	0x4e
+#define ADCX140_CH4_CFG4	0x4f
+#define ADCX140_CH5_CFG2	0x52
+#define ADCX140_CH5_CFG3	0x53
+#define ADCX140_CH5_CFG4	0x54
+#define ADCX140_CH6_CFG2	0x57
+#define ADCX140_CH6_CFG3	0x58
+#define ADCX140_CH6_CFG4	0x59
+#define ADCX140_CH7_CFG2	0x5c
+#define ADCX140_CH7_CFG3	0x5d
+#define ADCX140_CH7_CFG4	0x5e
+#define ADCX140_CH8_CFG2	0x61
+#define ADCX140_CH8_CFG3	0x62
+#define ADCX140_CH8_CFG4	0x63
+#define ADCX140_DSP_CFG0	0x6b
+#define ADCX140_DSP_CFG1	0x6c
+#define ADCX140_DRE_CFG0	0x6d
+#define ADCX140_IN_CH_EN	0x73
+#define ADCX140_ASI_OUT_CH_EN	0x74
+#define ADCX140_PWR_CFG		0x75
+#define ADCX140_DEV_STS0	0x76
+#define ADCX140_DEV_STS1	0x77
+
+#define ADCX140_RESET	BIT(0)
+
+#define ADCX140_WAKE_DEV	BIT(0)
+#define ADCX140_AREG_INTERNAL	BIT(7)
+
+#define ADCX140_BCLKINV_BIT	BIT(2)
+#define ADCX140_FSYNCINV_BIT	BIT(3)
+#define ADCX140_INV_MSK		(ADCX140_BCLKINV_BIT | ADCX140_FSYNCINV_BIT)
+#define ADCX140_BCLK_FSYNC_MASTER	BIT(7)
+#define ADCX140_I2S_MODE_BIT	BIT(6)
+#define ADCX140_LEFT_JUST_BIT	BIT(7)
+#define ADCX140_ASI_FORMAT_MSK	(ADCX140_I2S_MODE_BIT | ADCX140_LEFT_JUST_BIT)
+
+#define ADCX140_16_BIT_WORD	0x0
+#define ADCX140_20_BIT_WORD	BIT(4)
+#define ADCX140_24_BIT_WORD	BIT(5)
+#define ADCX140_32_BIT_WORD	(BIT(4) | BIT(5))
+#define ADCX140_WORD_LEN_MSK	0x30
+
+#define ADCX140_MAX_CHANNELS	8
+
+#define ADCX140_MIC_BIAS_VAL_VREF	0
+#define ADCX140_MIC_BIAS_VAL_VREF_1096	1
+#define ADCX140_MIC_BIAS_VAL_AVDD	6
+#define ADCX140_MIC_BIAS_VAL_MSK GENMASK(6, 4)
+
+#define ADCX140_MIC_BIAS_VREF_275V	0
+#define ADCX140_MIC_BIAS_VREF_25V	1
+#define ADCX140_MIC_BIAS_VREF_1375V	2
+#define ADCX140_MIC_BIAS_VREF_MSK GENMASK(1, 0)
+
+#define ADCX140_PWR_CFG_BIAS_PDZ	BIT(7)
+#define ADCX140_PWR_CFG_ADC_PDZ		BIT(6)
+#define ADCX140_PWR_CFG_PLL_PDZ		BIT(5)
+
+#define ADCX140_TX_OFFSET_MASK		GENMASK(4, 0)
+
+#endif /* _TLV320ADCX140_ */
-- 
2.25.0


^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family
  2020-02-19 12:59 [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
  2020-02-19 12:59 ` [PATCH v3 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings Dan Murphy
  2020-02-19 12:59 ` [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family Dan Murphy
@ 2020-02-20 19:24 ` Dan Murphy
  2020-02-20 19:44   ` Mark Brown
  2 siblings, 1 reply; 10+ messages in thread
From: Dan Murphy @ 2020-02-20 19:24 UTC (permalink / raw)
  To: lgirdwood, broonie, perex, tiwai; +Cc: alsa-devel, linux-kernel

Hello

On 2/19/20 6:59 AM, Dan Murphy wrote:
> Hello
>
> Introducing the Texas Instruments TLV320ADCx140 quad channel audio ADC.
> This device supports 4 analog inputs, 8 digital inputs or a combination of
> analog and digital microphones.
>
> TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140
> TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140
> TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140

Please let me know if there are any additional review comments on this 
code I have 2 more feature add patches on top of this patch that I 
developed a couple days ago and don't want to submit them for review 
until this driver is integrated.

Dan


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family
  2020-02-20 19:24 ` [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
@ 2020-02-20 19:44   ` Mark Brown
  0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2020-02-20 19:44 UTC (permalink / raw)
  To: Dan Murphy; +Cc: lgirdwood, perex, tiwai, alsa-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 579 bytes --]

On Thu, Feb 20, 2020 at 01:24:14PM -0600, Dan Murphy wrote:
> On 2/19/20 6:59 AM, Dan Murphy wrote:

> > TLV320ADC3140 - http://www.ti.com/lit/gpn/tlv320adc3140
> > TLV320ADC5140 - http://www.ti.com/lit/gpn/tlv320adc5140
> > TLV320ADC6140 - http://www.ti.com/lit/gpn/tlv320adc6140

> Please let me know if there are any additional review comments on this code
> I have 2 more feature add patches on top of this patch that I developed a
> couple days ago and don't want to submit them for review until this driver
> is integrated.

You posted this just a bit over 24 hours ago...

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
  2020-02-19 12:59 ` [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family Dan Murphy
@ 2020-02-20 20:48   ` Mark Brown
  2020-02-20 20:52     ` Dan Murphy
  2020-02-26 11:18   ` Ricard Wanderlof
  1 sibling, 1 reply; 10+ messages in thread
From: Mark Brown @ 2020-02-20 20:48 UTC (permalink / raw)
  To: Dan Murphy; +Cc: lgirdwood, perex, tiwai, alsa-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 414 bytes --]

On Wed, Feb 19, 2020 at 06:59:42AM -0600, Dan Murphy wrote:
> Add the tlv320adcx140 codec driver family.
> 
> The TLV320ADCx140 is a Burr-Brown™ highperformance, audio analog-to-digital
> converter (ADC) that supports simultaneous sampling of up to four analog
> channels or eight digital channels for the pulse density modulation (PDM)

This doesn't apply against current code, please check and resend.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
  2020-02-20 20:48   ` Mark Brown
@ 2020-02-20 20:52     ` Dan Murphy
  2020-02-20 21:13       ` Mark Brown
  0 siblings, 1 reply; 10+ messages in thread
From: Dan Murphy @ 2020-02-20 20:52 UTC (permalink / raw)
  To: Mark Brown; +Cc: lgirdwood, perex, tiwai, alsa-devel, linux-kernel

Mark

On 2/20/20 2:48 PM, Mark Brown wrote:
> On Wed, Feb 19, 2020 at 06:59:42AM -0600, Dan Murphy wrote:
>> Add the tlv320adcx140 codec driver family.
>>
>> The TLV320ADCx140 is a Burr-Brown™ highperformance, audio analog-to-digital
>> converter (ADC) that supports simultaneous sampling of up to four analog
>> channels or eight digital channels for the pulse density modulation (PDM)
> This doesn't apply against current code, please check and resend.

Ok this is against linux master should this be against your for-next branch?

Dan


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
  2020-02-20 20:52     ` Dan Murphy
@ 2020-02-20 21:13       ` Mark Brown
  0 siblings, 0 replies; 10+ messages in thread
From: Mark Brown @ 2020-02-20 21:13 UTC (permalink / raw)
  To: Dan Murphy; +Cc: lgirdwood, perex, tiwai, alsa-devel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 396 bytes --]

On Thu, Feb 20, 2020 at 02:52:11PM -0600, Dan Murphy wrote:
> On 2/20/20 2:48 PM, Mark Brown wrote:

> > This doesn't apply against current code, please check and resend.

> Ok this is against linux master should this be against your for-next branch?

Yes, everything except bugfixes should be against the current
development tree (in general things should apply on the tree they're
targetting).

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
  2020-02-19 12:59 ` [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family Dan Murphy
  2020-02-20 20:48   ` Mark Brown
@ 2020-02-26 11:18   ` Ricard Wanderlof
  2020-02-26 12:43     ` Dan Murphy
  1 sibling, 1 reply; 10+ messages in thread
From: Ricard Wanderlof @ 2020-02-26 11:18 UTC (permalink / raw)
  To: Dan Murphy; +Cc: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel


On Wed, 19 Feb 2020, Dan Murphy wrote:

> Add the tlv320adcx140 codec driver family.
>

...

> +
> +static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
> +                              unsigned int fmt)
> +{
> +       struct snd_soc_component *component = codec_dai->component;
> +       struct adcx140_priv *adcx140 =
> snd_soc_component_get_drvdata(component);
> +       u8 iface_reg1 = 0;
> +       u8 iface_reg2 = 0;
> +
> +       /* set master/slave audio interface */
> +       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> +       case SND_SOC_DAIFMT_CBM_CFM:
> +               iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;

Although this sets up the codec to be I2S master, there doesn't seem to be 
a way of actually configuring the master clock frequency in master mode, 
as there is no .set_sysclk member in adcx140_dai_ops (and the 
corresponding register field appears never to be touched by the driver).

> +               break;
> +       case SND_SOC_DAIFMT_CBS_CFS:
> +               break;
> +       case SND_SOC_DAIFMT_CBS_CFM:
> +       case SND_SOC_DAIFMT_CBM_CFS:
> +       default:
> +               dev_err(component->dev, "Invalid DAI master/slave interface\n");
> +               return -EINVAL;
> +       }

...

> +
> +static int adcx140_codec_probe(struct snd_soc_component *component)
> +{
> +       struct adcx140_priv *adcx140 =
> snd_soc_component_get_drvdata(component);
> +       int sleep_cfg_val = ADCX140_WAKE_DEV;
> +       u8 bias_source;
> +       u8 vref_source;
> +       int ret;
> +
> +       ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source",
> +                                     &bias_source);
> +       if (ret)
> +               bias_source = ADCX140_MIC_BIAS_VAL_VREF;
> +
> +       if (bias_source != ADCX140_MIC_BIAS_VAL_VREF &&
> +           bias_source != ADCX140_MIC_BIAS_VAL_VREF_1096 &&
> +           bias_source != ADCX140_MIC_BIAS_VAL_AVDD) {
> +               dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
> +               return -EINVAL;
> +       }
> +
> +       ret = device_property_read_u8(adcx140->dev, "ti,vref-source",
> +                                     &vref_source);
> +       if (ret)
> +               vref_source = ADCX140_MIC_BIAS_VREF_275V;
> +
> +       if (vref_source != ADCX140_MIC_BIAS_VREF_275V &&
> +           vref_source != ADCX140_MIC_BIAS_VREF_25V &&
> +           vref_source != ADCX140_MIC_BIAS_VREF_1375V) {

According to the data sheet, this setting controls the ADC full scale 
setting and has nothing to do with the mic bias voltage, hence using 
MIC_BIAS as part of the macro name is misleaading.

> +               dev_err(adcx140->dev, "Mic Bias source value is invalid\n");

Error text does not reflect the actual error, suggest "VREF value is 
invalid".

> +               return -EINVAL;
> +       }
> +
> +       bias_source |= vref_source;
> +
> +       ret = adcx140_reset(adcx140);
> +       if (ret)
> +               goto out;
> +
> +       if(adcx140->supply_areg == NULL)
> +               sleep_cfg_val |= ADCX140_AREG_INTERNAL;
> +
> +       ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG,
> sleep_cfg_val);
> +       if (ret) {
> +               dev_err(adcx140->dev, "setting sleep config failed %d\n",
> ret);
> +               goto out;
> +       }
> --
> 2.25.0
> 
> 
> 

/Ricard
-- 
Ricard Wolf Wanderlof                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
  2020-02-26 11:18   ` Ricard Wanderlof
@ 2020-02-26 12:43     ` Dan Murphy
  0 siblings, 0 replies; 10+ messages in thread
From: Dan Murphy @ 2020-02-26 12:43 UTC (permalink / raw)
  To: Ricard Wanderlof
  Cc: lgirdwood, broonie, perex, tiwai, alsa-devel, linux-kernel

Richard

On 2/26/20 5:18 AM, Ricard Wanderlof wrote:
> On Wed, 19 Feb 2020, Dan Murphy wrote:
>
>> Add the tlv320adcx140 codec driver family.
>>
> ...
>
>> +
>> +static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
>> +                              unsigned int fmt)
>> +{
>> +       struct snd_soc_component *component = codec_dai->component;
>> +       struct adcx140_priv *adcx140 =
>> snd_soc_component_get_drvdata(component);
>> +       u8 iface_reg1 = 0;
>> +       u8 iface_reg2 = 0;
>> +
>> +       /* set master/slave audio interface */
>> +       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>> +       case SND_SOC_DAIFMT_CBM_CFM:
>> +               iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;
> Although this sets up the codec to be I2S master, there doesn't seem to be
> a way of actually configuring the master clock frequency in master mode,
> as there is no .set_sysclk member in adcx140_dai_ops (and the
> corresponding register field appears never to be touched by the driver).

Thanks for the comments.  The driver was written for the device to be in 
slave mode with auto clock configuration set.

I will look into adding the master mode clock settings.

>
>> +               break;
>> +       case SND_SOC_DAIFMT_CBS_CFS:
>> +               break;
>> +       case SND_SOC_DAIFMT_CBS_CFM:
>> +       case SND_SOC_DAIFMT_CBM_CFS:
>> +       default:
>> +               dev_err(component->dev, "Invalid DAI master/slave interface\n");
>> +               return -EINVAL;
>> +       }
> ...
>
>> +
>> +static int adcx140_codec_probe(struct snd_soc_component *component)
>> +{
>> +       struct adcx140_priv *adcx140 =
>> snd_soc_component_get_drvdata(component);
>> +       int sleep_cfg_val = ADCX140_WAKE_DEV;
>> +       u8 bias_source;
>> +       u8 vref_source;
>> +       int ret;
>> +
>> +       ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source",
>> +                                     &bias_source);
>> +       if (ret)
>> +               bias_source = ADCX140_MIC_BIAS_VAL_VREF;
>> +
>> +       if (bias_source != ADCX140_MIC_BIAS_VAL_VREF &&
>> +           bias_source != ADCX140_MIC_BIAS_VAL_VREF_1096 &&
>> +           bias_source != ADCX140_MIC_BIAS_VAL_AVDD) {
>> +               dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
>> +               return -EINVAL;
>> +       }
>> +
>> +       ret = device_property_read_u8(adcx140->dev, "ti,vref-source",
>> +                                     &vref_source);
>> +       if (ret)
>> +               vref_source = ADCX140_MIC_BIAS_VREF_275V;
>> +
>> +       if (vref_source != ADCX140_MIC_BIAS_VREF_275V &&
>> +           vref_source != ADCX140_MIC_BIAS_VREF_25V &&
>> +           vref_source != ADCX140_MIC_BIAS_VREF_1375V) {
> According to the data sheet, this setting controls the ADC full scale
> setting and has nothing to do with the mic bias voltage, hence using
> MIC_BIAS as part of the macro name is misleaading.
>
These are not macros they are #defines but in any event I can change the 
names as they are all local to the c and h files.
>> +               dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
> Error text does not reflect the actual error, suggest "VREF value is
> invalid".

Ack

Dan



^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2020-02-26 12:49 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-19 12:59 [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
2020-02-19 12:59 ` [PATCH v3 1/2] dt-bindings: sound: Add TLV320ADCx140 dt bindings Dan Murphy
2020-02-19 12:59 ` [PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family Dan Murphy
2020-02-20 20:48   ` Mark Brown
2020-02-20 20:52     ` Dan Murphy
2020-02-20 21:13       ` Mark Brown
2020-02-26 11:18   ` Ricard Wanderlof
2020-02-26 12:43     ` Dan Murphy
2020-02-20 19:24 ` [PATCH v3 0/2] Introduce the TLV320ADCx140 codec family Dan Murphy
2020-02-20 19:44   ` Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).