From: Wei Yang <richardw.yang@linux.intel.com>
To: Baoquan He <bhe@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
akpm@linux-foundation.org, richardw.yang@linux.intel.com,
david@redhat.com, osalvador@suse.de, dan.j.williams@intel.com,
mhocko@suse.com, rppt@linux.ibm.com, robin.murphy@arm.com
Subject: Re: [PATCH v2 2/7] mm/sparse.c: introduce new function fill_subsection_map()
Date: Thu, 20 Feb 2020 14:14:27 +0800 [thread overview]
Message-ID: <20200220061427.GB32521@richard> (raw)
In-Reply-To: <20200220043316.19668-3-bhe@redhat.com>
On Thu, Feb 20, 2020 at 12:33:11PM +0800, Baoquan He wrote:
>Wrap the codes filling subsection map from section_activate() into
>fill_subsection_map(), this makes section_activate() cleaner and
>easier to follow.
>
>Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
>---
> mm/sparse.c | 45 ++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 34 insertions(+), 11 deletions(-)
>
>diff --git a/mm/sparse.c b/mm/sparse.c
>index b8e52c8fed7f..977b47acd38d 100644
>--- a/mm/sparse.c
>+++ b/mm/sparse.c
>@@ -790,24 +790,28 @@ static void section_deactivate(unsigned long pfn, unsigned long nr_pages,
> ms->section_mem_map = (unsigned long)NULL;
> }
>
>-static struct page * __meminit section_activate(int nid, unsigned long pfn,
>- unsigned long nr_pages, struct vmem_altmap *altmap)
>+/**
>+ * fill_subsection_map - fill subsection map of a memory region
>+ * @pfn - start pfn of the memory range
>+ * @nr_pages - number of pfns to add in the region
>+ *
>+ * This fills the related subsection map inside one section, and only
>+ * intended for hotplug.
>+ *
>+ * Return:
>+ * * 0 - On success.
>+ * * -EINVAL - Invalid memory region.
>+ * * -EEXIST - Subsection map has been set.
>+ */
>+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
> {
>- DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
> struct mem_section *ms = __pfn_to_section(pfn);
>- struct mem_section_usage *usage = NULL;
>+ DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
> unsigned long *subsection_map;
>- struct page *memmap;
> int rc = 0;
>
> subsection_mask_set(map, pfn, nr_pages);
>
>- if (!ms->usage) {
>- usage = kzalloc(mem_section_usage_size(), GFP_KERNEL);
>- if (!usage)
>- return ERR_PTR(-ENOMEM);
>- ms->usage = usage;
>- }
> subsection_map = &ms->usage->subsection_map[0];
>
> if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
>@@ -818,6 +822,25 @@ static struct page * __meminit section_activate(int nid, unsigned long pfn,
> bitmap_or(subsection_map, map, subsection_map,
> SUBSECTIONS_PER_SECTION);
>
>+ return rc;
>+}
>+
>+static struct page * __meminit section_activate(int nid, unsigned long pfn,
>+ unsigned long nr_pages, struct vmem_altmap *altmap)
>+{
>+ struct mem_section *ms = __pfn_to_section(pfn);
>+ struct mem_section_usage *usage = NULL;
>+ struct page *memmap;
>+ int rc = 0;
>+
>+ if (!ms->usage) {
>+ usage = kzalloc(mem_section_usage_size(), GFP_KERNEL);
>+ if (!usage)
>+ return ERR_PTR(-ENOMEM);
>+ ms->usage = usage;
>+ }
>+
>+ rc = fill_subsection_map(pfn, nr_pages);
> if (rc) {
> if (usage)
> ms->usage = NULL;
>--
>2.17.2
--
Wei Yang
Help you, Help me
next prev parent reply other threads:[~2020-02-20 6:14 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 4:33 [PATCH v2 0/7] mm/hotplug: Only use subsection map in VMEMMAP case Baoquan He
2020-02-20 4:33 ` [PATCH v2 1/7] mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case Baoquan He
2020-02-20 6:11 ` Wei Yang
2020-02-20 12:07 ` David Hildenbrand
2020-02-26 12:31 ` David Hildenbrand
2020-02-26 13:07 ` Baoquan He
2020-02-26 18:09 ` Dan Williams
2020-03-03 8:34 ` David Hildenbrand
2020-03-03 8:39 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 2/7] mm/sparse.c: introduce new function fill_subsection_map() Baoquan He
2020-02-20 6:14 ` Wei Yang [this message]
2020-02-28 14:27 ` David Hildenbrand
2020-03-01 4:59 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 3/7] mm/sparse.c: introduce a new function clear_subsection_map() Baoquan He
2020-02-20 6:15 ` Wei Yang
2020-02-28 14:36 ` David Hildenbrand
2020-03-01 5:20 ` Baoquan He
2020-03-02 15:43 ` David Hildenbrand
2020-03-03 1:53 ` Baoquan He
2020-03-03 8:22 ` Baoquan He
2020-03-03 8:33 ` David Hildenbrand
2020-03-03 8:38 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 4/7] mm/sparse.c: only use subsection map in VMEMMAP case Baoquan He
2020-02-20 6:17 ` Wei Yang
2020-02-25 9:57 ` Michal Hocko
2020-02-26 3:53 ` Baoquan He
2020-02-26 9:10 ` Michal Hocko
2020-02-28 7:25 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 5/7] mm/sparse.c: add code comment about sub-section hotplug Baoquan He
2020-02-20 4:33 ` [PATCH v2 6/7] mm/sparse.c: move subsection_map related codes together Baoquan He
2020-02-20 6:18 ` Wei Yang
2020-02-20 7:04 ` Baoquan He
2020-02-20 7:12 ` Wei Yang
2020-02-20 8:55 ` Baoquan He
2020-02-20 21:52 ` Wei Yang
2020-02-20 4:33 ` [PATCH v2 7/7] mm/sparse.c: Use __get_free_pages() instead in populate_section_memmap() Baoquan He
2020-02-20 10:38 ` [PATCH v2 0/7] mm/hotplug: Only use subsection map in VMEMMAP case Michal Hocko
2020-02-21 14:28 ` Baoquan He
2020-02-25 9:10 ` David Hildenbrand
2020-02-25 10:02 ` Michal Hocko
2020-02-26 3:42 ` Baoquan He
2020-02-26 9:14 ` Michal Hocko
2020-02-26 12:30 ` Baoquan He
2020-02-25 10:03 ` Michal Hocko
2020-02-26 3:44 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200220061427.GB32521@richard \
--to=richardw.yang@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=bhe@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=robin.murphy@arm.com \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).