On Mon, Feb 17, 2020 at 09:51:30AM +0100, Thierry Reding wrote:
> On Mon, Feb 10, 2020 at 01:41:26PM +0530, Nagarjuna Kristam wrote:
> > This patch series adds OTG support on XUSB hardware used in Tegra210 and
> > Tegra186 SoCs.
> > 
> > This patchset is composed with :
> >  - dt bindings of XUSB Pad Controller
> >  - dt bindings for XUSB device Driver
> >  - Tegra PHY driver for usb-role-switch and usb-phy
> >  - Tegra XUSB host mode driver to support OTG mode
> >  - Tegra XUSB device mode driver to use usb-phy and multi device mode
> >  - dts for XUSB pad controller
> >  - dts for xudc for Jetson TX1 and TX2
> >  - dts for Jetson-TK1
> >  - dts for Jetson-Nano
> > 
> > Tegra Pad controller driver register for role switch updates for
> > OTG/peripheral capable USB ports and adds usb-phy for that corresponding
> > USB ports.
> > 
> > Host and Device mode drivers gets usb-phy from USB2's phy and registers
> > notifier for role changes to perform corresponding role tasks.
> > 
> > Order of merging Patches:
> > Please merge DT changes first followed Tegra PHY driver changes and then
> > USB driver changes.
> 
> Felipe, Greg, Kishon,
> 
> Given the runtime dependencies between these various parts, I could pick
> these up into the Tegra tree if you provide an Acked-by.

Ping. Are you guys okay if I pick these up into the Tegra tree?

Thierry