From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Christoph Hellwig <hch@lst.de>,
linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>
Subject: [PATCH v3 03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled
Date: Thu, 27 Feb 2020 19:22:02 +0100 [thread overview]
Message-ID: <20200227182226.19188-4-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <20200227182226.19188-1-b.zolnierkie@samsung.com>
There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.
This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/ata/Kconfig | 40 +++++++++++++++++++++++++++++++++++++
drivers/scsi/Kconfig | 1 +
drivers/scsi/libsas/Kconfig | 1 +
3 files changed, 42 insertions(+)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a6beb2c5a692..ad7760656f71 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -34,6 +34,9 @@ if ATA
config ATA_NONSTANDARD
bool
+config SATA_HOST
+ bool
+
config ATA_VERBOSE_ERROR
bool "Verbose ATA error reporting"
default y
@@ -73,6 +76,7 @@ config SATA_ZPODD
config SATA_PMP
bool "SATA Port Multiplier support"
+ depends on SATA_HOST
default y
help
This option adds support for SATA Port Multipliers
@@ -85,6 +89,7 @@ comment "Controllers with non-SFF native interface"
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for AHCI Serial ATA.
@@ -111,6 +116,7 @@ config SATA_MOBILE_LPM_POLICY
config SATA_AHCI_PLATFORM
tristate "Platform AHCI SATA support"
+ select SATA_HOST
help
This option enables support for Platform AHCI Serial ATA
controllers.
@@ -121,6 +127,7 @@ config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
ARCH_BCM_63XX
+ select SATA_HOST
help
This option enables support for the AHCI SATA3 controller found on
Broadcom SoC's.
@@ -130,6 +137,7 @@ config AHCI_BRCM
config AHCI_DA850
tristate "DaVinci DA850 AHCI SATA support"
depends on ARCH_DAVINCI_DA850
+ select SATA_HOST
help
This option enables support for the DaVinci DA850 SoC's
onboard AHCI SATA.
@@ -139,6 +147,7 @@ config AHCI_DA850
config AHCI_DM816
tristate "DaVinci DM816 AHCI SATA support"
depends on ARCH_OMAP2PLUS
+ select SATA_HOST
help
This option enables support for the DaVinci DM816 SoC's
onboard AHCI SATA controller.
@@ -148,6 +157,7 @@ config AHCI_DM816
config AHCI_ST
tristate "ST AHCI SATA support"
depends on ARCH_STI
+ select SATA_HOST
help
This option enables support for ST AHCI SATA controller.
@@ -157,6 +167,7 @@ config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+ select SATA_HOST
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
@@ -166,6 +177,7 @@ config AHCI_IMX
config AHCI_CEVA
tristate "CEVA AHCI SATA support"
depends on OF
+ select SATA_HOST
help
This option enables support for the CEVA AHCI SATA.
It can be found on the Xilinx Zynq UltraScale+ MPSoC.
@@ -176,6 +188,7 @@ config AHCI_MTK
tristate "MediaTek AHCI SATA support"
depends on ARCH_MEDIATEK
select MFD_SYSCON
+ select SATA_HOST
help
This option enables support for the MediaTek SoC's
onboard AHCI SATA controller.
@@ -185,6 +198,7 @@ config AHCI_MTK
config AHCI_MVEBU
tristate "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU
+ select SATA_HOST
help
This option enables support for the Marvebu EBU SoC's
onboard AHCI SATA.
@@ -203,6 +217,7 @@ config AHCI_OCTEON
config AHCI_SUNXI
tristate "Allwinner sunxi AHCI SATA support"
depends on ARCH_SUNXI
+ select SATA_HOST
help
This option enables support for the Allwinner sunxi SoC's
onboard AHCI SATA.
@@ -212,6 +227,7 @@ config AHCI_SUNXI
config AHCI_TEGRA
tristate "NVIDIA Tegra AHCI SATA support"
depends on ARCH_TEGRA
+ select SATA_HOST
help
This option enables support for the NVIDIA Tegra SoC's
onboard AHCI SATA.
@@ -221,12 +237,14 @@ config AHCI_TEGRA
config AHCI_XGENE
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
depends on PHY_XGENE
+ select SATA_HOST
help
This option enables support for APM X-Gene SoC SATA host controller.
config AHCI_QORIQ
tristate "Freescale QorIQ AHCI SATA support"
depends on OF
+ select SATA_HOST
help
This option enables support for the Freescale QorIQ AHCI SoC's
onboard AHCI SATA.
@@ -236,6 +254,7 @@ config AHCI_QORIQ
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
+ select SATA_HOST
help
This option enables support for Freescale 3.0Gbps SATA controller.
It can be found on MPC837x and MPC8315.
@@ -245,6 +264,7 @@ config SATA_FSL
config SATA_GEMINI
tristate "Gemini SATA bridge support"
depends on ARCH_GEMINI || COMPILE_TEST
+ select SATA_HOST
default ARCH_GEMINI
help
This enabled support for the FTIDE010 to SATA bridge
@@ -255,6 +275,7 @@ config SATA_GEMINI
config SATA_AHCI_SEATTLE
tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
depends on ARCH_SEATTLE
+ select SATA_HOST
help
This option enables support for AMD Seattle SATA host controller.
@@ -263,12 +284,14 @@ config SATA_AHCI_SEATTLE
config SATA_INIC162X
tristate "Initio 162x SATA support (Very Experimental)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Initio 162x Serial ATA.
config SATA_ACARD_AHCI
tristate "ACard AHCI variant (ATP 8620)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Acard.
@@ -277,6 +300,7 @@ config SATA_ACARD_AHCI
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
@@ -326,6 +350,7 @@ config PATA_OCTEON_CF
config SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Pacific Digital Serial ATA QStor.
@@ -334,6 +359,7 @@ config SATA_QSTOR
config SATA_SX4
tristate "Promise SATA SX4 support (Experimental)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Promise Serial ATA SX4.
@@ -357,6 +383,7 @@ comment "SATA SFF controllers with BMDMA"
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for ICH5/6/7/8 Serial ATA
and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
@@ -368,6 +395,7 @@ config SATA_DWC
tristate "DesignWare Cores SATA support"
depends on DMADEVICES
select GENERIC_PHY
+ select SATA_HOST
help
This option enables support for the on-chip SATA controller of the
AppliedMicro processor 460EX.
@@ -398,6 +426,7 @@ config SATA_DWC_VDEBUG
config SATA_HIGHBANK
tristate "Calxeda Highbank SATA support"
depends on ARCH_HIGHBANK || COMPILE_TEST
+ select SATA_HOST
help
This option enables support for the Calxeda Highbank SoC's
onboard SATA.
@@ -409,6 +438,7 @@ config SATA_MV
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
+ select SATA_HOST
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -419,6 +449,7 @@ config SATA_MV
config SATA_NV
tristate "NVIDIA SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for NVIDIA Serial ATA.
@@ -427,6 +458,7 @@ config SATA_NV
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Promise Serial ATA TX2/TX4.
@@ -435,6 +467,7 @@ config SATA_PROMISE
config SATA_RCAR
tristate "Renesas R-Car SATA support"
depends on ARCH_RENESAS || COMPILE_TEST
+ select SATA_HOST
help
This option enables support for Renesas R-Car Serial ATA.
@@ -443,6 +476,7 @@ config SATA_RCAR
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Silicon Image Serial ATA.
@@ -452,6 +486,7 @@ config SATA_SIS
tristate "SiS 964/965/966/180 SATA support"
depends on PCI
select PATA_SIS
+ select SATA_HOST
help
This option enables support for SiS Serial ATA on
SiS 964/965/966/180 and Parallel ATA on SiS 180.
@@ -462,6 +497,7 @@ config SATA_SIS
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
@@ -471,6 +507,7 @@ config SATA_SVW
config SATA_ULI
tristate "ULi Electronics SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for ULi Electronics SATA.
@@ -479,6 +516,7 @@ config SATA_ULI
config SATA_VIA
tristate "VIA SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for VIA Serial ATA.
@@ -487,6 +525,7 @@ config SATA_VIA
config SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
@@ -1113,6 +1152,7 @@ config PATA_ACPI
config ATA_GENERIC
tristate "Generic ATA support"
depends on PCI && ATA_BMDMA
+ select SATA_HOST
help
This option enables support for generic BIOS configured
ATA controllers via the new ATA layer
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 2b882b96e0d4..a790d360ceaa 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -980,6 +980,7 @@ config SCSI_SYM53C8XX_MMIO
config SCSI_IPR
tristate "IBM Power Linux RAID adapter support"
depends on PCI && SCSI && ATA
+ select SATA_HOST
select FW_LOADER
select IRQ_POLL
select SGL_ALLOC
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 5c6a5eff2f8e..052ee3a26f6e 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -19,6 +19,7 @@ config SCSI_SAS_ATA
bool "ATA support for libsas (requires libata)"
depends on SCSI_SAS_LIBSAS
depends on ATA = y || ATA = SCSI_SAS_LIBSAS
+ select SATA_HOST
help
Builds in ATA support into libsas. Will necessitate
the loading of libata along with libsas.
--
2.24.1
next prev parent reply other threads:[~2020-02-27 18:24 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200227182238eucas1p1a4a5546e46b2385057f41528bd759aea@eucas1p1.samsung.com>
2020-02-27 18:21 ` [PATCH v3 00/27] ata: optimize core code size on PATA only setups Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182239eucas1p1166cd4b92fc84479634d6bcf67a672cf@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 01/27] ata: remove stale maintainership information from core code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182239eucas1p2fe76dcb686bea8f0a527461807b9292e@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 02/27] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182240eucas1p1035546a1fb97cfb9920542af289bf5ca@eucas1p1.samsung.com>
2020-02-27 18:22 ` Bartlomiej Zolnierkiewicz [this message]
[not found] ` <CGME20200227182240eucas1p272bac5df6668bbb7fee7638b4022a7b1@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 04/27] sata_promise: use ata_cable_sata() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182241eucas1p10cf24570346137befa34c6fd800db058@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 05/27] ata: simplify ata_scsiop_inq_89() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182241eucas1p12ef86c45356afb2230871d84dab04431@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 06/27] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182242eucas1p16f2af7ee2771f11f21f35c7f80636723@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 07/27] ata: optimize struct ata_force_param size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182242eucas1p1c1de818156ec670f4744725618375303@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 08/27] ata: optimize ata_scsi_rbuf[] size Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182243eucas1p138c6ac2b516bf318680498caf05ed8df@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 09/27] ata: move EXPORT_SYMBOL_GPL()s close to exported code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182243eucas1p2d95b61a6a3941ffd3bbead3a6ff4a813@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 10/27] ata: remove EXPORT_SYMBOL_GPL()s not used by modules Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182244eucas1p1e8e9e9567acda2a8cd02844685b6b12a@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 11/27] ata: fix CodingStyle issues in PATA timings code Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182244eucas1p200b1a33d037208b1998a2c9c659ae6f6@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 12/27] ata: separate PATA timings code from libata-core.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182245eucas1p219dee00956358ee0018caf2a07a8d602@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 13/27] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182245eucas1p22d7a52d7786fc8cdfa4dc898662ef087@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 14/27] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182246eucas1p2b20cf3379bb774d236e53301e2180252@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 15/27] ata: let compiler optimize out ata_eh_set_lpm() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182246eucas1p1d189bdc4d74efcd0c08193ce81b7acd7@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 16/27] ata: start separating SATA specific code from libata-core.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182247eucas1p2d83a212c200832402cc17817fab4f650@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 17/27] ata: move sata_scr_*() to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182247eucas1p1e9042300d9ad7dd56a1319afb980bdfe@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 18/27] ata: move *sata_set_spd*() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182248eucas1p12ce0e7ce8d0653085591eea64604c656@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 19/27] ata: move sata_link_{debounce,resume}() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182248eucas1p296773cdb2ab7ae9f4114f7052ff08414@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 20/27] ata: move sata_link_hardreset() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182248eucas1p12149429eae76c2a869d7323ab9abff1e@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 21/27] ata: move ata_qc_complete_multiple() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182249eucas1p14e64b8693929cd84a289909bbdb4506e@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 22/27] ata: move sata_deb_timing_*() " Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182249eucas1p19b8af9cc8b7e8fac33cf400702322c7d@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 23/27] ata: start separating SATA specific code from libata-scsi.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182250eucas1p1885e8264beb19b9d6eba638748fd1ff0@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 24/27] ata: move ata_sas_*() to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182250eucas1p2140d4ae6f3f65f2b712027dab63de3bd@eucas1p2.samsung.com>
2020-02-27 18:22 ` [PATCH v3 25/27] ata: start separating SATA specific code from libata-eh.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182251eucas1p1857e44a8f0860829e821748464bb936d@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 26/27] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c Bartlomiej Zolnierkiewicz
[not found] ` <CGME20200227182251eucas1p1f8f29d3df1a07a6997e3b7c3a3176cb3@eucas1p1.samsung.com>
2020-02-27 18:22 ` [PATCH v3 27/27] ata: make "libata.force" kernel parameter optional Bartlomiej Zolnierkiewicz
2020-03-12 14:09 ` [PATCH v3 00/27] ata: optimize core code size on PATA only setups Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200227182226.19188-4-b.zolnierkie@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=axboe@kernel.dk \
--cc=geert@linux-m68k.org \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=martin.petersen@oracle.com \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).