[PATCH 04/23] mtd: spi-nor: Expose stuctures and functions to manufacturer drivers

[<Tudor.Ambarus@microchip.com>]

From: Boris Brezillon <bbrezillon@kernel.org>

Expose the flash_info struct and the generic set_4byte() implementations.
Some manufacturers rely on the generic set_4byte() implementations.
Remove the static specifier and expose their prototypes in core.h.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 171 +++----------------------------------
 drivers/mtd/spi-nor/core.h | 159 ++++++++++++++++++++++++++++++++++
 2 files changed, 170 insertions(+), 160 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 1edcb53c4df3..16cf9d4b1a73 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -38,102 +38,8 @@
  */
 #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
 
-#define SPI_NOR_MAX_ID_LEN	6
 #define SPI_NOR_MAX_ADDR_WIDTH	4
 
-/**
- * struct spi_nor_fixups - SPI NOR fixup hooks
- * @default_init: called after default flash parameters init. Used to tweak
- *                flash parameters when information provided by the flash_info
- *                table is incomplete or wrong.
- * @post_bfpt: called after the BFPT table has been parsed
- * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
- *             that do not support RDSFDP). Typically used to tweak various
- *             parameters that could not be extracted by other means (i.e.
- *             when information provided by the SFDP/flash_info tables are
- *             incomplete or wrong).
- *
- * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
- * table is broken or not available.
- */
-struct spi_nor_fixups {
-	void (*default_init)(struct spi_nor *nor);
-	int (*post_bfpt)(struct spi_nor *nor,
-			 const struct sfdp_parameter_header *bfpt_header,
-			 const struct sfdp_bfpt *bfpt,
-			 struct spi_nor_flash_parameter *params);
-	void (*post_sfdp)(struct spi_nor *nor);
-};
-
-struct flash_info {
-	char		*name;
-
-	/*
-	 * This array stores the ID bytes.
-	 * The first three bytes are the JEDIC ID.
-	 * JEDEC ID zero means "no ID" (mostly older chips).
-	 */
-	u8		id[SPI_NOR_MAX_ID_LEN];
-	u8		id_len;
-
-	/* The size listed here is what works with SPINOR_OP_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
-	unsigned	sector_size;
-	u16		n_sectors;
-
-	u16		page_size;
-	u16		addr_width;
-
-	u32		flags;
-#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
-#define SST_WRITE		BIT(2)	/* use SST byte programming */
-#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
-#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
-#define USE_FSR			BIT(7)	/* use flag status register */
-#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB		BIT(9)	/*
-					 * Flash SR has Top/Bottom (TB) protect
-					 * bit. Must be used with
-					 * SPI_NOR_HAS_LOCK.
-					 */
-#define SPI_NOR_XSR_RDY		BIT(10)	/*
-					 * S3AN flashes have specific opcode to
-					 * read the status register.
-					 * Flags SPI_NOR_XSR_RDY and SPI_S3AN
-					 * use the same bit as one implies the
-					 * other, but we will get rid of
-					 * SPI_S3AN soon.
-					 */
-#define	SPI_S3AN		BIT(10)	/*
-					 * Xilinx Spartan 3AN In-System Flash
-					 * (MFR cannot be used for probing
-					 * because it has the same value as
-					 * ATMEL flashes)
-					 */
-#define SPI_NOR_4B_OPCODES	BIT(11)	/*
-					 * Use dedicated 4byte address op codes
-					 * to support memory size above 128Mib.
-					 */
-#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
-#define USE_CLSR		BIT(14)	/* use CLSR command */
-#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
-#define SPI_NOR_TB_SR_BIT6	BIT(16)	/*
-					 * Top/Bottom (TB) is bit 6 of
-					 * status register. Must be used with
-					 * SPI_NOR_HAS_TB.
-					 */
-
-	/* Part specific fixup hooks. */
-	const struct spi_nor_fixups *fixups;
-};
-
-#define JEDEC_MFR(info)	((info)->id[0])
-
 /**
  * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data
  *                           transfer
@@ -295,8 +201,8 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
  *
  * Return: number of bytes written successfully, -errno otherwise
  */
-static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
-				  const u8 *buf)
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+			   const u8 *buf)
 {
 	if (nor->spimem)
 		return spi_nor_spimem_write_data(nor, to, len, buf);
@@ -310,7 +216,7 @@ static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_write_enable(struct spi_nor *nor)
+int spi_nor_write_enable(struct spi_nor *nor)
 {
 	int ret;
 
@@ -339,7 +245,7 @@ static int spi_nor_write_enable(struct spi_nor *nor)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_write_disable(struct spi_nor *nor)
+int spi_nor_write_disable(struct spi_nor *nor)
 {
 	int ret;
 
@@ -464,7 +370,7 @@ static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_en4_ex4_set_4byte(struct spi_nor *nor, bool enable)
+int spi_nor_en4_ex4_set_4byte(struct spi_nor *nor, bool enable)
 {
 	int ret;
 
@@ -501,7 +407,7 @@ static int spi_nor_en4_ex4_set_4byte(struct spi_nor *nor, bool enable)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_en4_ex4_wen_set_4byte(struct spi_nor *nor, bool enable)
+int spi_nor_en4_ex4_wen_set_4byte(struct spi_nor *nor, bool enable)
 {
 	int ret;
 
@@ -556,7 +462,7 @@ static int spansion_set_4byte(struct spi_nor *nor, bool enable)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
+int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
 {
 	int ret;
 
@@ -621,7 +527,7 @@ static int winbond_set_4byte(struct spi_nor *nor, bool enable)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
+int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
 {
 	int ret;
 
@@ -834,7 +740,7 @@ static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_wait_till_ready(struct spi_nor *nor)
+int spi_nor_wait_till_ready(struct spi_nor *nor)
 {
 	return spi_nor_wait_till_ready_with_timeout(nor,
 						    DEFAULT_READY_WAIT_JIFFIES);
@@ -1142,11 +1048,6 @@ static int spi_nor_erase_chip(struct spi_nor *nor)
 	return ret;
 }
 
-static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
-{
-	return mtd->priv;
-}
-
 static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
 {
 	size_t i;
@@ -1225,7 +1126,7 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
 	}
 }
 
-static int spi_nor_lock_and_prep(struct spi_nor *nor)
+int spi_nor_lock_and_prep(struct spi_nor *nor)
 {
 	int ret = 0;
 
@@ -1241,7 +1142,7 @@ static int spi_nor_lock_and_prep(struct spi_nor *nor)
 	return ret;
 }
 
-static void spi_nor_unlock_and_unprep(struct spi_nor *nor)
+void spi_nor_unlock_and_unprep(struct spi_nor *nor)
 {
 	if (nor->controller_ops && nor->controller_ops->unprepare)
 		nor->controller_ops->unprepare(nor);
@@ -2104,56 +2005,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
 	return 0;
 }
 
-/* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff,				\
-			((_ext_id) >> 8) & 0xff,			\
-			(_ext_id) & 0xff,				\
-			},						\
-		.id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),	\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = 256,					\
-		.flags = (_flags),
-
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff,				\
-			((_ext_id) >> 16) & 0xff,			\
-			((_ext_id) >> 8) & 0xff,			\
-			(_ext_id) & 0xff,				\
-			},						\
-		.id_len = 6,						\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = 256,					\
-		.flags = (_flags),
-
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
-		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = (_page_size),				\
-		.addr_width = (_addr_width),				\
-		.flags = (_flags),
-
-#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff				\
-			},						\
-		.id_len = 3,						\
-		.sector_size = (8*_page_size),				\
-		.n_sectors = (_n_sectors),				\
-		.page_size = _page_size,				\
-		.addr_width = 3,					\
-		.flags = SPI_NOR_NO_FR | SPI_S3AN,
-
 static int
 is25lp256_post_bfpt_fixups(struct spi_nor *nor,
 			   const struct sfdp_parameter_header *bfpt_header,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index e1256fe50d12..7e2d88edf1f1 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -9,12 +9,166 @@
 
 #include "sfdp.h"
 
+#define SPI_NOR_MAX_ID_LEN	6
+
+/**
+ * struct spi_nor_fixups - SPI NOR fixup hooks
+ * @default_init: called after default flash parameters init. Used to tweak
+ *                flash parameters when information provided by the flash_info
+ *                table is incomplete or wrong.
+ * @post_bfpt: called after the BFPT table has been parsed
+ * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
+ *             that do not support RDSFDP). Typically used to tweak various
+ *             parameters that could not be extracted by other means (i.e.
+ *             when information provided by the SFDP/flash_info tables are
+ *             incomplete or wrong).
+ *
+ * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
+ * table is broken or not available.
+ */
+struct spi_nor_fixups {
+	void (*default_init)(struct spi_nor *nor);
+	int (*post_bfpt)(struct spi_nor *nor,
+			 const struct sfdp_parameter_header *bfpt_header,
+			 const struct sfdp_bfpt *bfpt,
+			 struct spi_nor_flash_parameter *params);
+	void (*post_sfdp)(struct spi_nor *nor);
+};
+
+struct flash_info {
+	char		*name;
+
+	/*
+	 * This array stores the ID bytes.
+	 * The first three bytes are the JEDIC ID.
+	 * JEDEC ID zero means "no ID" (mostly older chips).
+	 */
+	u8		id[SPI_NOR_MAX_ID_LEN];
+	u8		id_len;
+
+	/* The size listed here is what works with SPINOR_OP_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned	sector_size;
+	u16		n_sectors;
+
+	u16		page_size;
+	u16		addr_width;
+
+	u32		flags;
+#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
+#define SST_WRITE		BIT(2)	/* use SST byte programming */
+#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
+#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
+#define USE_FSR			BIT(7)	/* use flag status register */
+#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
+#define SPI_NOR_HAS_TB		BIT(9)	/*
+					 * Flash SR has Top/Bottom (TB) protect
+					 * bit. Must be used with
+					 * SPI_NOR_HAS_LOCK.
+					 */
+#define SPI_NOR_XSR_RDY		BIT(10)	/*
+					 * S3AN flashes have specific opcode to
+					 * read the status register.
+					 * Flags SPI_NOR_XSR_RDY and SPI_S3AN
+					 * use the same bit as one implies the
+					 * other, but we will get rid of
+					 * SPI_S3AN soon.
+					 */
+#define	SPI_S3AN		BIT(10)	/*
+					 * Xilinx Spartan 3AN In-System Flash
+					 * (MFR cannot be used for probing
+					 * because it has the same value as
+					 * ATMEL flashes)
+					 */
+#define SPI_NOR_4B_OPCODES	BIT(11)	/*
+					 * Use dedicated 4byte address op codes
+					 * to support memory size above 128Mib.
+					 */
+#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
+#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
+#define USE_CLSR		BIT(14)	/* use CLSR command */
+#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
+#define SPI_NOR_TB_SR_BIT6	BIT(16)	/*
+					 * Top/Bottom (TB) is bit 6 of
+					 * status register. Must be used with
+					 * SPI_NOR_HAS_TB.
+					 */
+
+	/* Part specific fixup hooks. */
+	const struct spi_nor_fixups *fixups;
+};
+
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff,				\
+			((_ext_id) >> 8) & 0xff,			\
+			(_ext_id) & 0xff,				\
+			},						\
+		.id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),	\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.flags = (_flags),
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff,				\
+			((_ext_id) >> 16) & 0xff,			\
+			((_ext_id) >> 8) & 0xff,			\
+			(_ext_id) & 0xff,				\
+			},						\
+		.id_len = 6,						\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = 256,					\
+		.flags = (_flags),
+
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
+		.sector_size = (_sector_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = (_page_size),				\
+		.addr_width = (_addr_width),				\
+		.flags = (_flags),
+
+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
+		.id = {							\
+			((_jedec_id) >> 16) & 0xff,			\
+			((_jedec_id) >> 8) & 0xff,			\
+			(_jedec_id) & 0xff				\
+			},						\
+		.id_len = 3,						\
+		.sector_size = (8*_page_size),				\
+		.n_sectors = (_n_sectors),				\
+		.page_size = _page_size,				\
+		.addr_width = 3,					\
+		.flags = SPI_NOR_NO_FR | SPI_S3AN,
+
+int spi_nor_write_enable(struct spi_nor *nor);
+int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_en4_ex4_set_4byte(struct spi_nor *nor, bool enable);
+int spi_nor_en4_ex4_wen_set_4byte(struct spi_nor *nor, bool enable);
+int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
+int spi_nor_wait_till_ready(struct spi_nor *nor);
+int spi_nor_lock_and_prep(struct spi_nor *nor);
+void spi_nor_unlock_and_unprep(struct spi_nor *nor);
 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
 
+int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
 ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
 			  u8 *buf);
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+			   const u8 *buf);
 
 int spi_nor_hwcaps_read2cmd(u32 hwcaps);
 u8 spi_nor_convert_3to4_read(u8 opcode);
@@ -33,4 +187,9 @@ int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
 			     const struct sfdp_bfpt *bfpt,
 			     struct spi_nor_flash_parameter *params);
 
+static struct spi_nor __maybe_unused *mtd_to_spi_nor(struct mtd_info *mtd)
+{
+	return mtd->priv;
+}
+
 #endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */
-- 
2.23.0