From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-rtc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64
Date: Fri, 6 Mar 2020 01:58:09 +0100 [thread overview]
Message-ID: <20200306005809.38530-3-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20200306005809.38530-1-alexandre.belloni@bootlin.com>
Call the 64bit versions of rtc_tm time conversion to allow extending
support after 2106 and properly supporting the STv2 range.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-pl031.c | 27 +++++++--------------------
1 file changed, 7 insertions(+), 20 deletions(-)
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 07dc0f264100..40d7450a1ce4 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -125,11 +125,9 @@ static int pl031_stv2_tm_to_time(struct device *dev,
return -EINVAL;
} else if (wday == -1) {
/* wday is not provided, calculate it here */
- unsigned long time;
struct rtc_time calc_tm;
- rtc_tm_to_time(tm, &time);
- rtc_time_to_tm(time, &calc_tm);
+ rtc_time64_to_tm(rtc_tm_to_time64(tm), &calc_tm);
wday = calc_tm.tm_wday;
}
@@ -246,30 +244,25 @@ static int pl031_read_time(struct device *dev, struct rtc_time *tm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
- rtc_time_to_tm(readl(ldata->base + RTC_DR), tm);
+ rtc_time64_to_tm(readl(ldata->base + RTC_DR), tm);
return 0;
}
static int pl031_set_time(struct device *dev, struct rtc_time *tm)
{
- unsigned long time;
struct pl031_local *ldata = dev_get_drvdata(dev);
- int ret;
- ret = rtc_tm_to_time(tm, &time);
-
- if (ret == 0)
- writel(time, ldata->base + RTC_LR);
+ writel(rtc_tm_to_time64(tm), ldata->base + RTC_LR);
- return ret;
+ return 0;
}
static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
- rtc_time_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
+ rtc_time64_to_tm(readl(ldata->base + RTC_MR), &alarm->time);
alarm->pending = readl(ldata->base + RTC_RIS) & RTC_BIT_AI;
alarm->enabled = readl(ldata->base + RTC_IMSC) & RTC_BIT_AI;
@@ -280,16 +273,10 @@ static int pl031_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
struct pl031_local *ldata = dev_get_drvdata(dev);
- unsigned long time;
- int ret;
- ret = rtc_tm_to_time(&alarm->time, &time);
- if (ret == 0) {
- writel(time, ldata->base + RTC_MR);
- pl031_alarm_irq_enable(dev, alarm->enabled);
- }
+ writel(rtc_tm_to_time64(&alarm->time), ldata->base + RTC_MR);
- return ret;
+ return 0;
}
static int pl031_remove(struct amba_device *adev)
--
2.24.1
next prev parent reply other threads:[~2020-03-06 0:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 0:58 [PATCH 1/3] rtc: pl031: remove useless invalid alarm handling Alexandre Belloni
2020-03-06 0:58 ` [PATCH 2/3] rtc: pl031: set range Alexandre Belloni
2020-03-09 9:30 ` Linus Walleij
2020-03-06 0:58 ` Alexandre Belloni [this message]
2020-03-09 9:30 ` [PATCH 3/3] rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64 Linus Walleij
2020-03-06 13:45 ` [PATCH 1/3] rtc: pl031: remove useless invalid alarm handling Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200306005809.38530-3-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=a.zummo@towertech.it \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).