* [PATCH] ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7
@ 2020-03-05 21:26 Martin Kaiser
2020-03-06 6:47 ` Uwe Kleine-König
2020-03-11 8:55 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Martin Kaiser @ 2020-03-05 21:26 UTC (permalink / raw)
To: Shawn Guo, kernel; +Cc: linux-arm-kernel, linux-kernel, Martin Kaiser
i.MX25's Keypad Port (KPP) can be used with a key pad matrix of up to
8 x 8 keys. Add pin configurations for rows 4 to 7.
The new defines have been tested on an out-of-tree board.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
arch/arm/boot/dts/imx25-pinfunc.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index b5a12412440e..111bfdcbe552 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -255,10 +255,12 @@
#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000
#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
+#define MX25_PAD_LD12__KPP_ROW6 0x0f8 0x2f0 0x544 0x04 0x000
#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001
#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000
#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
+#define MX25_PAD_LD13__KPP_ROW7 0x0fc 0x2f4 0x548 0x04 0x000
#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000
#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000
@@ -516,9 +518,11 @@
#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000
#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000
+#define MX25_PAD_FEC_TX_EN__KPP_ROW4 0x1d8 0x3d0 0x53c 0x06 0x000
#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000
+#define MX25_PAD_FEC_RDATA0__KPP_ROW5 0x1dc 0x3d4 0x540 0x06 0x000
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000
/*
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7
2020-03-05 21:26 [PATCH] ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7 Martin Kaiser
@ 2020-03-06 6:47 ` Uwe Kleine-König
2020-03-11 8:55 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Uwe Kleine-König @ 2020-03-06 6:47 UTC (permalink / raw)
To: Martin Kaiser; +Cc: Shawn Guo, kernel, linux-kernel, linux-arm-kernel
On Thu, Mar 05, 2020 at 10:26:24PM +0100, Martin Kaiser wrote:
> i.MX25's Keypad Port (KPP) can be used with a key pad matrix of up to
> 8 x 8 keys. Add pin configurations for rows 4 to 7.
>
> The new defines have been tested on an out-of-tree board.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> arch/arm/boot/dts/imx25-pinfunc.h | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
> index b5a12412440e..111bfdcbe552 100644
> --- a/arch/arm/boot/dts/imx25-pinfunc.h
> +++ b/arch/arm/boot/dts/imx25-pinfunc.h
> @@ -255,10 +255,12 @@
>
> #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000
> #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
> +#define MX25_PAD_LD12__KPP_ROW6 0x0f8 0x2f0 0x544 0x04 0x000
> #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001
>
> #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000
> #define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
> +#define MX25_PAD_LD13__KPP_ROW7 0x0fc 0x2f4 0x548 0x04 0x000
> #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000
> #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000
> @@ -516,9 +518,11 @@
>
> #define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000
> #define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000
> +#define MX25_PAD_FEC_TX_EN__KPP_ROW4 0x1d8 0x3d0 0x53c 0x06 0x000
>
> #define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000
> #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000
> +#define MX25_PAD_FEC_RDATA0__KPP_ROW5 0x1dc 0x3d4 0x540 0x06 0x000
>
> #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7
2020-03-05 21:26 [PATCH] ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7 Martin Kaiser
2020-03-06 6:47 ` Uwe Kleine-König
@ 2020-03-11 8:55 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2020-03-11 8:55 UTC (permalink / raw)
To: Martin Kaiser; +Cc: kernel, linux-arm-kernel, linux-kernel
On Thu, Mar 05, 2020 at 10:26:24PM +0100, Martin Kaiser wrote:
> i.MX25's Keypad Port (KPP) can be used with a key pad matrix of up to
> 8 x 8 keys. Add pin configurations for rows 4 to 7.
>
> The new defines have been tested on an out-of-tree board.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-03-11 8:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-05 21:26 [PATCH] ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7 Martin Kaiser
2020-03-06 6:47 ` Uwe Kleine-König
2020-03-11 8:55 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).