linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFC PATCH kunit-next] kunit: kunit_tool: Separate out config/build/exec/parse
@ 2020-03-11 22:21 David Gow
  2020-03-25 18:09 ` Brendan Higgins
  0 siblings, 1 reply; 3+ messages in thread
From: David Gow @ 2020-03-11 22:21 UTC (permalink / raw)
  To: Brendan Higgins; +Cc: linux-kselftest, kunit-dev, linux-kernel, David Gow

Add new subcommands to kunit.py to allow stages of the existing 'run'
subcommand to be run independently:
- 'config': Verifies that .config is a subset of .kunitconfig
- 'build': Compiles a UML kernel for KUnit
- 'exec': Runs the kernel, and outputs the test results.
- 'parse': Parses test results from a file or stdin

Most of these are not hugely useful by themselves yet, and there's room
for plenty of bikeshedding on the names, but this hopefully can form a
foundation for future improvements.

Signed-off-by: David Gow <davidgow@google.com>
---
[Whoops: typo-ed Brendan's email. Sorry about that!]

As was briefly disccussed in [1], this change is part of a "separation
of concerns" in kunit_tool. This should make it easier to integrate
kunit_tool into other setups.

Of particular intrest is probably 'kunit.py parse', which should allow
KUnit results to be parsed from other sources, such as after loading a
module, or from a non-UML kernel, or from debugfs when that's
supported[2].

[1]: https://lkml.org/lkml/2020/2/5/552
[2]: https://patchwork.kernel.org/patch/11419901/

 tools/testing/kunit/kunit.py           | 236 ++++++++++++++++++++-----
 tools/testing/kunit/kunit_tool_test.py |  55 ++++++
 2 files changed, 242 insertions(+), 49 deletions(-)

diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
index 180ad1e1b04f..92a634594cf6 100755
--- a/tools/testing/kunit/kunit.py
+++ b/tools/testing/kunit/kunit.py
@@ -20,8 +20,12 @@ import kunit_config
 import kunit_kernel
 import kunit_parser
 
-KunitResult = namedtuple('KunitResult', ['status','result'])
+KunitResult = namedtuple('KunitResult', ['status','result','elapsed_time'])
 
+KunitConfigRequest = namedtuple('KunitConfigRequest', ['build_dir', 'defconfig'])
+KunitBuildRequest = namedtuple('KunitBuildRequest', ['jobs', 'build_dir'])
+KunitExecRequest = namedtuple('KunitExecRequest', ['timeout', 'build_dir'])
+KunitParseRequest = namedtuple('KunitParseRequest', ['raw_output', 'input_data'])
 KunitRequest = namedtuple('KunitRequest', ['raw_output','timeout', 'jobs', 'build_dir', 'defconfig'])
 
 KernelDirectoryPath = sys.argv[0].split('tools/testing/kunit/')[0]
@@ -44,14 +48,25 @@ def get_kernel_root_path():
 		sys.exit(1)
 	return parts[0]
 
-def run_tests(linux: kunit_kernel.LinuxSourceTree,
-	      request: KunitRequest) -> KunitResult:
+def config_tests(linux: kunit_kernel.LinuxSourceTree,
+		 request: KunitConfigRequest) -> KunitResult:
+	kunit_parser.print_with_timestamp('Configuring KUnit Kernel ...')
+
 	config_start = time.time()
+	if request.defconfig:
+		create_default_kunitconfig()
 	success = linux.build_reconfig(request.build_dir)
 	config_end = time.time()
 	if not success:
-		return KunitResult(KunitStatus.CONFIG_FAILURE, 'could not configure kernel')
+		return KunitResult(KunitStatus.CONFIG_FAILURE,
+				   'could not configure kernel',
+				   config_end - config_start)
+	return KunitResult(KunitStatus.SUCCESS,
+			   'configured kernel successfully',
+			   config_end - config_start)
 
+def build_tests(linux: kunit_kernel.LinuxSourceTree,
+		request: KunitBuildRequest) -> KunitResult:
 	kunit_parser.print_with_timestamp('Building KUnit Kernel ...')
 
 	build_start = time.time()
@@ -59,73 +74,156 @@ def run_tests(linux: kunit_kernel.LinuxSourceTree,
 	build_end = time.time()
 	if not success:
 		return KunitResult(KunitStatus.BUILD_FAILURE, 'could not build kernel')
+	if not success:
+		return KunitResult(KunitStatus.BUILD_FAILURE,
+				   'could not build kernel',
+				   build_end - build_start)
+	return KunitResult(KunitStatus.SUCCESS,
+			   'built kernel successfully',
+			   build_end - build_start)
 
+def exec_tests(linux: kunit_kernel.LinuxSourceTree,
+	       request: KunitExecRequest) -> KunitResult:
 	kunit_parser.print_with_timestamp('Starting KUnit Kernel ...')
 	test_start = time.time()
 
+	result = linux.run_kernel(timeout=request.timeout,
+				  build_dir=request.build_dir)
+	test_end = time.time()
+
+	return KunitResult(KunitStatus.SUCCESS,
+			   result,
+			   test_end - test_start)
+
+def parse_tests(request: KunitParseRequest) -> KunitResult:
+	parse_start = time.time()
+
 	test_result = kunit_parser.TestResult(kunit_parser.TestStatus.SUCCESS,
 					      [],
 					      'Tests not Parsed.')
 	if request.raw_output:
-		kunit_parser.raw_output(
-			linux.run_kernel(timeout=request.timeout,
-					 build_dir=request.build_dir))
+		kunit_parser.raw_output(request.input_data)
 	else:
-		kunit_output = linux.run_kernel(timeout=request.timeout,
-						build_dir=request.build_dir)
-		test_result = kunit_parser.parse_run_tests(kunit_output)
-	test_end = time.time()
+		test_result = kunit_parser.parse_run_tests(request.input_data)
+	parse_end = time.time()
+
+	if test_result.status != kunit_parser.TestStatus.SUCCESS:
+		return KunitResult(KunitStatus.TEST_FAILURE, test_result,
+				   parse_end - parse_start)
+
+	return KunitResult(KunitStatus.SUCCESS, test_result,
+				parse_end - parse_start)
+
+
+def run_tests(linux: kunit_kernel.LinuxSourceTree,
+	      request: KunitRequest) -> KunitResult:
+	run_start = time.time()
+
+	config_request = KunitConfigRequest(request.build_dir, request.defconfig)
+	config_result = config_tests(linux, config_request)
+	if config_result.status != KunitStatus.SUCCESS:
+		return config_result
+
+	build_request = KunitBuildRequest(request.jobs, request.build_dir)
+	build_result = build_tests(linux, build_request)
+	if build_result.status != KunitStatus.SUCCESS:
+		return build_result
+
+	exec_request = KunitExecRequest(request.timeout, request.build_dir)
+	exec_result = exec_tests(linux, exec_request)
+	if exec_result.status != KunitStatus.SUCCESS:
+		return exec_result
+
+	parse_request = KunitParseRequest(request.raw_output, exec_result.result)
+	parse_result = parse_tests(parse_request)
+
+	run_end = time.time()
 
 	kunit_parser.print_with_timestamp((
 		'Elapsed time: %.3fs total, %.3fs configuring, %.3fs ' +
 		'building, %.3fs running\n') % (
-				test_end - config_start,
-				config_end - config_start,
-				build_end - build_start,
-				test_end - test_start))
+				run_end - run_start,
+				config_result.elapsed_time,
+				build_result.elapsed_time,
+				exec_result.elapsed_time))
+	return parse_result
+
+def add_common_opts(parser):
+	parser.add_argument('--build_dir',
+			    help='As in the make command, it specifies the build '
+			    'directory.',
+			    type=str, default='', metavar='build_dir')
+
+def add_config_opts(parser):
+	parser.add_argument('--defconfig',
+				help='Uses a default .kunitconfig.',
+				action='store_true')
+
+def add_build_opts(parser):
+	parser.add_argument('--jobs',
+			    help='As in the make command, "Specifies  the number of '
+			    'jobs (commands) to run simultaneously."',
+			    type=int, default=8, metavar='jobs')
+
+def add_exec_opts(parser):
+	parser.add_argument('--timeout',
+			    help='maximum number of seconds to allow for all tests '
+			    'to run. This does not include time taken to build the '
+			    'tests.',
+			    type=int,
+			    default=300,
+			    metavar='timeout')
+
+def add_parse_opts(parser):
+	parser.add_argument('--raw_output', help='don\'t format output from kernel',
+			    action='store_true')
 
-	if test_result.status != kunit_parser.TestStatus.SUCCESS:
-		return KunitResult(KunitStatus.TEST_FAILURE, test_result)
-	else:
-		return KunitResult(KunitStatus.SUCCESS, test_result)
 
 def main(argv, linux=None):
 	parser = argparse.ArgumentParser(
 			description='Helps writing and running KUnit tests.')
 	subparser = parser.add_subparsers(dest='subcommand')
 
+	# The 'run' command will config, build, exec, and parse in one go.
 	run_parser = subparser.add_parser('run', help='Runs KUnit tests.')
-	run_parser.add_argument('--raw_output', help='don\'t format output from kernel',
-				action='store_true')
+	add_common_opts(run_parser)
+	add_config_opts(run_parser)
+	add_build_opts(run_parser)
+	add_exec_opts(run_parser)
+	add_parse_opts(run_parser)
 
-	run_parser.add_argument('--timeout',
-				help='maximum number of seconds to allow for all tests '
-				'to run. This does not include time taken to build the '
-				'tests.',
-				type=int,
-				default=300,
-				metavar='timeout')
-
-	run_parser.add_argument('--jobs',
-				help='As in the make command, "Specifies  the number of '
-				'jobs (commands) to run simultaneously."',
-				type=int, default=8, metavar='jobs')
-
-	run_parser.add_argument('--build_dir',
-				help='As in the make command, it specifies the build '
-				'directory.',
-				type=str, default='', metavar='build_dir')
-
-	run_parser.add_argument('--defconfig',
-				help='Uses a default .kunitconfig.',
-				action='store_true')
+	config_parser = subparser.add_parser('config',
+						help='Ensures that .config contains all of '
+						'the options in .kunitconfig')
+	add_common_opts(config_parser)
+	add_config_opts(config_parser)
 
-	cli_args = parser.parse_args(argv)
+	build_parser = subparser.add_parser('build', help='Builds a kernel with KUnit tests')
+	add_common_opts(build_parser)
+	add_build_opts(build_parser)
 
-	if cli_args.subcommand == 'run':
-		if get_kernel_root_path():
-			os.chdir(get_kernel_root_path())
+	exec_parser = subparser.add_parser('exec', help='Run a kernel with KUnit tests')
+	add_common_opts(exec_parser)
+	add_exec_opts(exec_parser)
+	add_parse_opts(exec_parser)
+
+	# The 'parse' option is special, as it doesn't need the kernel source
+	# (therefore there is no need for a build_dir, hence no add_common_opts)
+	# and the '--file' argument is not relevant to 'run', so isn't in
+	# add_parse_opts()
+	parse_parser = subparser.add_parser('parse',
+					    help='Parses KUnit results from a file, '
+					    'and parses formatted results.')
+	add_parse_opts(parse_parser)
+	parse_parser.add_argument('file',
+				  help='Specifies the file to read results from.',
+				  type=str, default='-', metavar='input_file')
+
+	cli_args = parser.parse_args(argv)
 
+	# Set up the build_dir and source tree for commands which use it
+	# (everything but 'parse')
+	if cli_args.subcommand != 'parse':
 		if cli_args.build_dir:
 			if not os.path.exists(cli_args.build_dir):
 				os.mkdir(cli_args.build_dir)
@@ -133,12 +231,11 @@ def main(argv, linux=None):
 				cli_args.build_dir,
 				kunit_kernel.kunitconfig_path)
 
-		if cli_args.defconfig:
-			create_default_kunitconfig()
-
 		if not linux:
 			linux = kunit_kernel.LinuxSourceTree()
 
+
+	if cli_args.subcommand == 'run':
 		request = KunitRequest(cli_args.raw_output,
 				       cli_args.timeout,
 				       cli_args.jobs,
@@ -147,6 +244,47 @@ def main(argv, linux=None):
 		result = run_tests(linux, request)
 		if result.status != KunitStatus.SUCCESS:
 			sys.exit(1)
+	elif cli_args.subcommand == 'config':
+		request = KunitConfigRequest(cli_args.build_dir,
+					     cli_args.defconfig)
+		result = config_tests(linux, request)
+		kunit_parser.print_with_timestamp((
+			'Elapsed time: %.3fs\n') % (
+				result.elapsed_time))
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
+	elif cli_args.subcommand == 'build':
+		request = KunitBuildRequest(cli_args.jobs,
+					    cli_args.build_dir)
+		result = build_tests(linux, request)
+		kunit_parser.print_with_timestamp((
+			'Elapsed time: %.3fs\n') % (
+				result.elapsed_time))
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
+	elif cli_args.subcommand == 'exec':
+		exec_request = KunitExecRequest(cli_args.timeout,
+						cli_args.build_dir)
+		exec_result = exec_tests(linux, exec_request)
+		parse_request = KunitParseRequest(cli_args.raw_output,
+						  exec_result.result)
+		result = parse_tests(parse_request)
+		kunit_parser.print_with_timestamp((
+			'Elapsed time: %.3fs\n') % (
+				exec_result.elapsed_time))
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
+	elif cli_args.subcommand == 'parse':
+		if cli_args.file == '-':
+			kunit_output = sys.stdin
+		else:
+			with open(cli_args.file, 'r') as f:
+				kunit_output = f.read().splitlines()
+		request = KunitParseRequest(cli_args.raw_output,
+					    kunit_output)
+		result = parse_tests(request)
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
 	else:
 		parser.print_help()
 
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py
index cba97756ac4a..0d04425ead04 100755
--- a/tools/testing/kunit/kunit_tool_test.py
+++ b/tools/testing/kunit/kunit_tool_test.py
@@ -170,6 +170,24 @@ class KUnitMainTest(unittest.TestCase):
 		self.print_patch.stop()
 		pass
 
+	def test_config_passes_args_pass(self):
+		kunit.main(['config'], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 1
+		assert self.linux_source_mock.run_kernel.call_count == 0
+
+	def test_build_passes_args_pass(self):
+		kunit.main(['build'], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 0
+		self.linux_source_mock.build_um_kernel.assert_called_once_with(8, '')
+		assert self.linux_source_mock.run_kernel.call_count == 0
+
+	def test_exec_passes_args_pass(self):
+		kunit.main(['exec'], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 0
+		assert self.linux_source_mock.run_kernel.call_count == 1
+		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=300)
+		self.print_mock.assert_any_call(StrContains('Testing complete.'))
+
 	def test_run_passes_args_pass(self):
 		kunit.main(['run'], self.linux_source_mock)
 		assert self.linux_source_mock.build_reconfig.call_count == 1
@@ -177,6 +195,13 @@ class KUnitMainTest(unittest.TestCase):
 		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=300)
 		self.print_mock.assert_any_call(StrContains('Testing complete.'))
 
+	def test_exec_passes_args_fail(self):
+		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
+		with self.assertRaises(SystemExit) as e:
+			kunit.main(['exec'], self.linux_source_mock)
+		assert type(e.exception) == SystemExit
+		assert e.exception.code == 1
+
 	def test_run_passes_args_fail(self):
 		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
 		with self.assertRaises(SystemExit) as e:
@@ -187,6 +212,14 @@ class KUnitMainTest(unittest.TestCase):
 		assert self.linux_source_mock.run_kernel.call_count == 1
 		self.print_mock.assert_any_call(StrContains(' 0 tests run'))
 
+	def test_exec_raw_output(self):
+		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
+		kunit.main(['exec', '--raw_output'], self.linux_source_mock)
+		assert self.linux_source_mock.run_kernel.call_count == 1
+		for kall in self.print_mock.call_args_list:
+			assert kall != mock.call(StrContains('Testing complete.'))
+			assert kall != mock.call(StrContains(' 0 tests run'))
+
 	def test_run_raw_output(self):
 		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
 		kunit.main(['run', '--raw_output'], self.linux_source_mock)
@@ -196,6 +229,12 @@ class KUnitMainTest(unittest.TestCase):
 			assert kall != mock.call(StrContains('Testing complete.'))
 			assert kall != mock.call(StrContains(' 0 tests run'))
 
+	def test_exec_timeout(self):
+		timeout = 3453
+		kunit.main(['exec', '--timeout', str(timeout)], self.linux_source_mock)
+		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=timeout)
+		self.print_mock.assert_any_call(StrContains('Testing complete.'))
+
 	def test_run_timeout(self):
 		timeout = 3453
 		kunit.main(['run', '--timeout', str(timeout)], self.linux_source_mock)
@@ -210,5 +249,21 @@ class KUnitMainTest(unittest.TestCase):
 		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir=build_dir, timeout=300)
 		self.print_mock.assert_any_call(StrContains('Testing complete.'))
 
+	def test_config_builddir(self):
+		build_dir = '.kunit'
+		kunit.main(['config', '--build_dir', build_dir], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 1
+
+	def test_build_builddir(self):
+		build_dir = '.kunit'
+		kunit.main(['build', '--build_dir', build_dir], self.linux_source_mock)
+		self.linux_source_mock.build_um_kernel.assert_called_once_with(8, build_dir)
+
+	def test_exec_builddir(self):
+		build_dir = '.kunit'
+		kunit.main(['exec', '--build_dir', build_dir], self.linux_source_mock)
+		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir=build_dir, timeout=300)
+		self.print_mock.assert_any_call(StrContains('Testing complete.'))
+
 if __name__ == '__main__':
 	unittest.main()
-- 
2.25.1.481.gfbce0eb801-goog


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [RFC PATCH kunit-next] kunit: kunit_tool: Separate out config/build/exec/parse
  2020-03-11 22:21 [RFC PATCH kunit-next] kunit: kunit_tool: Separate out config/build/exec/parse David Gow
@ 2020-03-25 18:09 ` Brendan Higgins
  0 siblings, 0 replies; 3+ messages in thread
From: Brendan Higgins @ 2020-03-25 18:09 UTC (permalink / raw)
  To: David Gow
  Cc: open list:KERNEL SELFTEST FRAMEWORK, KUnit Development,
	Linux Kernel Mailing List

On Wed, Mar 11, 2020 at 3:23 PM David Gow <davidgow@google.com> wrote:
>
> Add new subcommands to kunit.py to allow stages of the existing 'run'
> subcommand to be run independently:
> - 'config': Verifies that .config is a subset of .kunitconfig
> - 'build': Compiles a UML kernel for KUnit
> - 'exec': Runs the kernel, and outputs the test results.
> - 'parse': Parses test results from a file or stdin

I think all the names are fine. I like the verb-noun pattern.

>
> Most of these are not hugely useful by themselves yet, and there's room
> for plenty of bikeshedding on the names, but this hopefully can form a
> foundation for future improvements.
>
> Signed-off-by: David Gow <davidgow@google.com>

This looks really good! I really only have one minor comment right
now, see below.

Reviewed-by: Brendan Higgins <brendanhiggins@google.com>

> ---
> [Whoops: typo-ed Brendan's email. Sorry about that!]
>
> As was briefly disccussed in [1], this change is part of a "separation
> of concerns" in kunit_tool. This should make it easier to integrate
> kunit_tool into other setups.
>
> Of particular intrest is probably 'kunit.py parse', which should allow
> KUnit results to be parsed from other sources, such as after loading a
> module, or from a non-UML kernel, or from debugfs when that's
> supported[2].
>
> [1]: https://lkml.org/lkml/2020/2/5/552
> [2]: https://patchwork.kernel.org/patch/11419901/
>
>  tools/testing/kunit/kunit.py           | 236 ++++++++++++++++++++-----
>  tools/testing/kunit/kunit_tool_test.py |  55 ++++++
>  2 files changed, 242 insertions(+), 49 deletions(-)
>
> diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
> index 180ad1e1b04f..92a634594cf6 100755
> --- a/tools/testing/kunit/kunit.py
> +++ b/tools/testing/kunit/kunit.py

[...]

> @@ -147,6 +244,47 @@ def main(argv, linux=None):
>                 result = run_tests(linux, request)
>                 if result.status != KunitStatus.SUCCESS:
>                         sys.exit(1)
> +       elif cli_args.subcommand == 'config':
> +               request = KunitConfigRequest(cli_args.build_dir,
> +                                            cli_args.defconfig)
> +               result = config_tests(linux, request)
> +               kunit_parser.print_with_timestamp((
> +                       'Elapsed time: %.3fs\n') % (
> +                               result.elapsed_time))
> +               if result.status != KunitStatus.SUCCESS:
> +                       sys.exit(1)
> +       elif cli_args.subcommand == 'build':
> +               request = KunitBuildRequest(cli_args.jobs,
> +                                           cli_args.build_dir)
> +               result = build_tests(linux, request)
> +               kunit_parser.print_with_timestamp((
> +                       'Elapsed time: %.3fs\n') % (
> +                               result.elapsed_time))
> +               if result.status != KunitStatus.SUCCESS:
> +                       sys.exit(1)
> +       elif cli_args.subcommand == 'exec':
> +               exec_request = KunitExecRequest(cli_args.timeout,
> +                                               cli_args.build_dir)
> +               exec_result = exec_tests(linux, exec_request)
> +               parse_request = KunitParseRequest(cli_args.raw_output,
> +                                                 exec_result.result)
> +               result = parse_tests(parse_request)
> +               kunit_parser.print_with_timestamp((
> +                       'Elapsed time: %.3fs\n') % (
> +                               exec_result.elapsed_time))
> +               if result.status != KunitStatus.SUCCESS:
> +                       sys.exit(1)
> +       elif cli_args.subcommand == 'parse':
> +               if cli_args.file == '-':
> +                       kunit_output = sys.stdin

Could you make it so parse accepts the dmesg log from stdin if no file
is specified instead of a '-'?

> +               else:
> +                       with open(cli_args.file, 'r') as f:
> +                               kunit_output = f.read().splitlines()
> +               request = KunitParseRequest(cli_args.raw_output,
> +                                           kunit_output)
> +               result = parse_tests(request)
> +               if result.status != KunitStatus.SUCCESS:
> +                       sys.exit(1)
>         else:
>                 parser.print_help()
>

[...]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [RFC PATCH kunit-next] kunit: kunit_tool: Separate out config/build/exec/parse
@ 2020-03-11 22:19 David Gow
  0 siblings, 0 replies; 3+ messages in thread
From: David Gow @ 2020-03-11 22:19 UTC (permalink / raw)
  To: Brendan Higgins; +Cc: linux-kselftest, kunit-dev, linux-kernel, David Gow

Add new subcommands to kunit.py to allow stages of the existing 'run'
subcommand to be run independently:
- 'config': Verifies that .config is a subset of .kunitconfig
- 'build': Compiles a UML kernel for KUnit
- 'exec': Runs the kernel, and outputs the test results.
- 'parse': Parses test results from a file or stdin

Most of these are not hugely useful by themselves yet, and there's room
for plenty of bikeshedding on the names, but this hopefully can form a
foundation for future improvements.

Signed-off-by: David Gow <davidgow@google.com>
---
As was briefly disccussed in [1], this change is part of a "separation
of concerns" in kunit_tool. This should make it easier to integrate
kunit_tool into other setups.

Of particular intrest is probably 'kunit.py parse', which should allow
KUnit results to be parsed from other sources, such as after loading a
module, or from a non-UML kernel, or from debugfs when that's
supported[2].

[1]: https://lkml.org/lkml/2020/2/5/552
[2]: https://patchwork.kernel.org/patch/11419901/

 tools/testing/kunit/kunit.py           | 236 ++++++++++++++++++++-----
 tools/testing/kunit/kunit_tool_test.py |  55 ++++++
 2 files changed, 242 insertions(+), 49 deletions(-)

diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
index 180ad1e1b04f..92a634594cf6 100755
--- a/tools/testing/kunit/kunit.py
+++ b/tools/testing/kunit/kunit.py
@@ -20,8 +20,12 @@ import kunit_config
 import kunit_kernel
 import kunit_parser
 
-KunitResult = namedtuple('KunitResult', ['status','result'])
+KunitResult = namedtuple('KunitResult', ['status','result','elapsed_time'])
 
+KunitConfigRequest = namedtuple('KunitConfigRequest', ['build_dir', 'defconfig'])
+KunitBuildRequest = namedtuple('KunitBuildRequest', ['jobs', 'build_dir'])
+KunitExecRequest = namedtuple('KunitExecRequest', ['timeout', 'build_dir'])
+KunitParseRequest = namedtuple('KunitParseRequest', ['raw_output', 'input_data'])
 KunitRequest = namedtuple('KunitRequest', ['raw_output','timeout', 'jobs', 'build_dir', 'defconfig'])
 
 KernelDirectoryPath = sys.argv[0].split('tools/testing/kunit/')[0]
@@ -44,14 +48,25 @@ def get_kernel_root_path():
 		sys.exit(1)
 	return parts[0]
 
-def run_tests(linux: kunit_kernel.LinuxSourceTree,
-	      request: KunitRequest) -> KunitResult:
+def config_tests(linux: kunit_kernel.LinuxSourceTree,
+		 request: KunitConfigRequest) -> KunitResult:
+	kunit_parser.print_with_timestamp('Configuring KUnit Kernel ...')
+
 	config_start = time.time()
+	if request.defconfig:
+		create_default_kunitconfig()
 	success = linux.build_reconfig(request.build_dir)
 	config_end = time.time()
 	if not success:
-		return KunitResult(KunitStatus.CONFIG_FAILURE, 'could not configure kernel')
+		return KunitResult(KunitStatus.CONFIG_FAILURE,
+				   'could not configure kernel',
+				   config_end - config_start)
+	return KunitResult(KunitStatus.SUCCESS,
+			   'configured kernel successfully',
+			   config_end - config_start)
 
+def build_tests(linux: kunit_kernel.LinuxSourceTree,
+		request: KunitBuildRequest) -> KunitResult:
 	kunit_parser.print_with_timestamp('Building KUnit Kernel ...')
 
 	build_start = time.time()
@@ -59,73 +74,156 @@ def run_tests(linux: kunit_kernel.LinuxSourceTree,
 	build_end = time.time()
 	if not success:
 		return KunitResult(KunitStatus.BUILD_FAILURE, 'could not build kernel')
+	if not success:
+		return KunitResult(KunitStatus.BUILD_FAILURE,
+				   'could not build kernel',
+				   build_end - build_start)
+	return KunitResult(KunitStatus.SUCCESS,
+			   'built kernel successfully',
+			   build_end - build_start)
 
+def exec_tests(linux: kunit_kernel.LinuxSourceTree,
+	       request: KunitExecRequest) -> KunitResult:
 	kunit_parser.print_with_timestamp('Starting KUnit Kernel ...')
 	test_start = time.time()
 
+	result = linux.run_kernel(timeout=request.timeout,
+				  build_dir=request.build_dir)
+	test_end = time.time()
+
+	return KunitResult(KunitStatus.SUCCESS,
+			   result,
+			   test_end - test_start)
+
+def parse_tests(request: KunitParseRequest) -> KunitResult:
+	parse_start = time.time()
+
 	test_result = kunit_parser.TestResult(kunit_parser.TestStatus.SUCCESS,
 					      [],
 					      'Tests not Parsed.')
 	if request.raw_output:
-		kunit_parser.raw_output(
-			linux.run_kernel(timeout=request.timeout,
-					 build_dir=request.build_dir))
+		kunit_parser.raw_output(request.input_data)
 	else:
-		kunit_output = linux.run_kernel(timeout=request.timeout,
-						build_dir=request.build_dir)
-		test_result = kunit_parser.parse_run_tests(kunit_output)
-	test_end = time.time()
+		test_result = kunit_parser.parse_run_tests(request.input_data)
+	parse_end = time.time()
+
+	if test_result.status != kunit_parser.TestStatus.SUCCESS:
+		return KunitResult(KunitStatus.TEST_FAILURE, test_result,
+				   parse_end - parse_start)
+
+	return KunitResult(KunitStatus.SUCCESS, test_result,
+				parse_end - parse_start)
+
+
+def run_tests(linux: kunit_kernel.LinuxSourceTree,
+	      request: KunitRequest) -> KunitResult:
+	run_start = time.time()
+
+	config_request = KunitConfigRequest(request.build_dir, request.defconfig)
+	config_result = config_tests(linux, config_request)
+	if config_result.status != KunitStatus.SUCCESS:
+		return config_result
+
+	build_request = KunitBuildRequest(request.jobs, request.build_dir)
+	build_result = build_tests(linux, build_request)
+	if build_result.status != KunitStatus.SUCCESS:
+		return build_result
+
+	exec_request = KunitExecRequest(request.timeout, request.build_dir)
+	exec_result = exec_tests(linux, exec_request)
+	if exec_result.status != KunitStatus.SUCCESS:
+		return exec_result
+
+	parse_request = KunitParseRequest(request.raw_output, exec_result.result)
+	parse_result = parse_tests(parse_request)
+
+	run_end = time.time()
 
 	kunit_parser.print_with_timestamp((
 		'Elapsed time: %.3fs total, %.3fs configuring, %.3fs ' +
 		'building, %.3fs running\n') % (
-				test_end - config_start,
-				config_end - config_start,
-				build_end - build_start,
-				test_end - test_start))
+				run_end - run_start,
+				config_result.elapsed_time,
+				build_result.elapsed_time,
+				exec_result.elapsed_time))
+	return parse_result
+
+def add_common_opts(parser):
+	parser.add_argument('--build_dir',
+			    help='As in the make command, it specifies the build '
+			    'directory.',
+			    type=str, default='', metavar='build_dir')
+
+def add_config_opts(parser):
+	parser.add_argument('--defconfig',
+				help='Uses a default .kunitconfig.',
+				action='store_true')
+
+def add_build_opts(parser):
+	parser.add_argument('--jobs',
+			    help='As in the make command, "Specifies  the number of '
+			    'jobs (commands) to run simultaneously."',
+			    type=int, default=8, metavar='jobs')
+
+def add_exec_opts(parser):
+	parser.add_argument('--timeout',
+			    help='maximum number of seconds to allow for all tests '
+			    'to run. This does not include time taken to build the '
+			    'tests.',
+			    type=int,
+			    default=300,
+			    metavar='timeout')
+
+def add_parse_opts(parser):
+	parser.add_argument('--raw_output', help='don\'t format output from kernel',
+			    action='store_true')
 
-	if test_result.status != kunit_parser.TestStatus.SUCCESS:
-		return KunitResult(KunitStatus.TEST_FAILURE, test_result)
-	else:
-		return KunitResult(KunitStatus.SUCCESS, test_result)
 
 def main(argv, linux=None):
 	parser = argparse.ArgumentParser(
 			description='Helps writing and running KUnit tests.')
 	subparser = parser.add_subparsers(dest='subcommand')
 
+	# The 'run' command will config, build, exec, and parse in one go.
 	run_parser = subparser.add_parser('run', help='Runs KUnit tests.')
-	run_parser.add_argument('--raw_output', help='don\'t format output from kernel',
-				action='store_true')
+	add_common_opts(run_parser)
+	add_config_opts(run_parser)
+	add_build_opts(run_parser)
+	add_exec_opts(run_parser)
+	add_parse_opts(run_parser)
 
-	run_parser.add_argument('--timeout',
-				help='maximum number of seconds to allow for all tests '
-				'to run. This does not include time taken to build the '
-				'tests.',
-				type=int,
-				default=300,
-				metavar='timeout')
-
-	run_parser.add_argument('--jobs',
-				help='As in the make command, "Specifies  the number of '
-				'jobs (commands) to run simultaneously."',
-				type=int, default=8, metavar='jobs')
-
-	run_parser.add_argument('--build_dir',
-				help='As in the make command, it specifies the build '
-				'directory.',
-				type=str, default='', metavar='build_dir')
-
-	run_parser.add_argument('--defconfig',
-				help='Uses a default .kunitconfig.',
-				action='store_true')
+	config_parser = subparser.add_parser('config',
+						help='Ensures that .config contains all of '
+						'the options in .kunitconfig')
+	add_common_opts(config_parser)
+	add_config_opts(config_parser)
 
-	cli_args = parser.parse_args(argv)
+	build_parser = subparser.add_parser('build', help='Builds a kernel with KUnit tests')
+	add_common_opts(build_parser)
+	add_build_opts(build_parser)
 
-	if cli_args.subcommand == 'run':
-		if get_kernel_root_path():
-			os.chdir(get_kernel_root_path())
+	exec_parser = subparser.add_parser('exec', help='Run a kernel with KUnit tests')
+	add_common_opts(exec_parser)
+	add_exec_opts(exec_parser)
+	add_parse_opts(exec_parser)
+
+	# The 'parse' option is special, as it doesn't need the kernel source
+	# (therefore there is no need for a build_dir, hence no add_common_opts)
+	# and the '--file' argument is not relevant to 'run', so isn't in
+	# add_parse_opts()
+	parse_parser = subparser.add_parser('parse',
+					    help='Parses KUnit results from a file, '
+					    'and parses formatted results.')
+	add_parse_opts(parse_parser)
+	parse_parser.add_argument('file',
+				  help='Specifies the file to read results from.',
+				  type=str, default='-', metavar='input_file')
+
+	cli_args = parser.parse_args(argv)
 
+	# Set up the build_dir and source tree for commands which use it
+	# (everything but 'parse')
+	if cli_args.subcommand != 'parse':
 		if cli_args.build_dir:
 			if not os.path.exists(cli_args.build_dir):
 				os.mkdir(cli_args.build_dir)
@@ -133,12 +231,11 @@ def main(argv, linux=None):
 				cli_args.build_dir,
 				kunit_kernel.kunitconfig_path)
 
-		if cli_args.defconfig:
-			create_default_kunitconfig()
-
 		if not linux:
 			linux = kunit_kernel.LinuxSourceTree()
 
+
+	if cli_args.subcommand == 'run':
 		request = KunitRequest(cli_args.raw_output,
 				       cli_args.timeout,
 				       cli_args.jobs,
@@ -147,6 +244,47 @@ def main(argv, linux=None):
 		result = run_tests(linux, request)
 		if result.status != KunitStatus.SUCCESS:
 			sys.exit(1)
+	elif cli_args.subcommand == 'config':
+		request = KunitConfigRequest(cli_args.build_dir,
+					     cli_args.defconfig)
+		result = config_tests(linux, request)
+		kunit_parser.print_with_timestamp((
+			'Elapsed time: %.3fs\n') % (
+				result.elapsed_time))
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
+	elif cli_args.subcommand == 'build':
+		request = KunitBuildRequest(cli_args.jobs,
+					    cli_args.build_dir)
+		result = build_tests(linux, request)
+		kunit_parser.print_with_timestamp((
+			'Elapsed time: %.3fs\n') % (
+				result.elapsed_time))
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
+	elif cli_args.subcommand == 'exec':
+		exec_request = KunitExecRequest(cli_args.timeout,
+						cli_args.build_dir)
+		exec_result = exec_tests(linux, exec_request)
+		parse_request = KunitParseRequest(cli_args.raw_output,
+						  exec_result.result)
+		result = parse_tests(parse_request)
+		kunit_parser.print_with_timestamp((
+			'Elapsed time: %.3fs\n') % (
+				exec_result.elapsed_time))
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
+	elif cli_args.subcommand == 'parse':
+		if cli_args.file == '-':
+			kunit_output = sys.stdin
+		else:
+			with open(cli_args.file, 'r') as f:
+				kunit_output = f.read().splitlines()
+		request = KunitParseRequest(cli_args.raw_output,
+					    kunit_output)
+		result = parse_tests(request)
+		if result.status != KunitStatus.SUCCESS:
+			sys.exit(1)
 	else:
 		parser.print_help()
 
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py
index cba97756ac4a..0d04425ead04 100755
--- a/tools/testing/kunit/kunit_tool_test.py
+++ b/tools/testing/kunit/kunit_tool_test.py
@@ -170,6 +170,24 @@ class KUnitMainTest(unittest.TestCase):
 		self.print_patch.stop()
 		pass
 
+	def test_config_passes_args_pass(self):
+		kunit.main(['config'], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 1
+		assert self.linux_source_mock.run_kernel.call_count == 0
+
+	def test_build_passes_args_pass(self):
+		kunit.main(['build'], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 0
+		self.linux_source_mock.build_um_kernel.assert_called_once_with(8, '')
+		assert self.linux_source_mock.run_kernel.call_count == 0
+
+	def test_exec_passes_args_pass(self):
+		kunit.main(['exec'], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 0
+		assert self.linux_source_mock.run_kernel.call_count == 1
+		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=300)
+		self.print_mock.assert_any_call(StrContains('Testing complete.'))
+
 	def test_run_passes_args_pass(self):
 		kunit.main(['run'], self.linux_source_mock)
 		assert self.linux_source_mock.build_reconfig.call_count == 1
@@ -177,6 +195,13 @@ class KUnitMainTest(unittest.TestCase):
 		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=300)
 		self.print_mock.assert_any_call(StrContains('Testing complete.'))
 
+	def test_exec_passes_args_fail(self):
+		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
+		with self.assertRaises(SystemExit) as e:
+			kunit.main(['exec'], self.linux_source_mock)
+		assert type(e.exception) == SystemExit
+		assert e.exception.code == 1
+
 	def test_run_passes_args_fail(self):
 		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
 		with self.assertRaises(SystemExit) as e:
@@ -187,6 +212,14 @@ class KUnitMainTest(unittest.TestCase):
 		assert self.linux_source_mock.run_kernel.call_count == 1
 		self.print_mock.assert_any_call(StrContains(' 0 tests run'))
 
+	def test_exec_raw_output(self):
+		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
+		kunit.main(['exec', '--raw_output'], self.linux_source_mock)
+		assert self.linux_source_mock.run_kernel.call_count == 1
+		for kall in self.print_mock.call_args_list:
+			assert kall != mock.call(StrContains('Testing complete.'))
+			assert kall != mock.call(StrContains(' 0 tests run'))
+
 	def test_run_raw_output(self):
 		self.linux_source_mock.run_kernel = mock.Mock(return_value=[])
 		kunit.main(['run', '--raw_output'], self.linux_source_mock)
@@ -196,6 +229,12 @@ class KUnitMainTest(unittest.TestCase):
 			assert kall != mock.call(StrContains('Testing complete.'))
 			assert kall != mock.call(StrContains(' 0 tests run'))
 
+	def test_exec_timeout(self):
+		timeout = 3453
+		kunit.main(['exec', '--timeout', str(timeout)], self.linux_source_mock)
+		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir='', timeout=timeout)
+		self.print_mock.assert_any_call(StrContains('Testing complete.'))
+
 	def test_run_timeout(self):
 		timeout = 3453
 		kunit.main(['run', '--timeout', str(timeout)], self.linux_source_mock)
@@ -210,5 +249,21 @@ class KUnitMainTest(unittest.TestCase):
 		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir=build_dir, timeout=300)
 		self.print_mock.assert_any_call(StrContains('Testing complete.'))
 
+	def test_config_builddir(self):
+		build_dir = '.kunit'
+		kunit.main(['config', '--build_dir', build_dir], self.linux_source_mock)
+		assert self.linux_source_mock.build_reconfig.call_count == 1
+
+	def test_build_builddir(self):
+		build_dir = '.kunit'
+		kunit.main(['build', '--build_dir', build_dir], self.linux_source_mock)
+		self.linux_source_mock.build_um_kernel.assert_called_once_with(8, build_dir)
+
+	def test_exec_builddir(self):
+		build_dir = '.kunit'
+		kunit.main(['exec', '--build_dir', build_dir], self.linux_source_mock)
+		self.linux_source_mock.run_kernel.assert_called_once_with(build_dir=build_dir, timeout=300)
+		self.print_mock.assert_any_call(StrContains('Testing complete.'))
+
 if __name__ == '__main__':
 	unittest.main()
-- 
2.25.1.481.gfbce0eb801-goog


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-03-25 18:10 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-11 22:21 [RFC PATCH kunit-next] kunit: kunit_tool: Separate out config/build/exec/parse David Gow
2020-03-25 18:09 ` Brendan Higgins
  -- strict thread matches above, loose matches on Subject: below --
2020-03-11 22:19 David Gow

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).