From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: bjorn.andersson@linaro.org, agross@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, linux-kernel@vger.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 4/5] arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
Date: Thu, 12 Mar 2020 14:30:23 +0000 [thread overview]
Message-ID: <20200312143024.11059-5-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20200312143024.11059-1-srinivas.kandagatla@linaro.org>
Add pinctrl nodes required for QUAT I2S
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 136 +++++++++++++++++++++++++++
1 file changed, 136 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5b7626f2a27b..c565948e322f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2152,6 +2152,142 @@
function = "qup15";
};
};
+
+ quat_mi2s_sleep: quat_mi2s_sleep {
+ mux {
+ pins = "gpio58", "gpio59";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio58", "gpio59";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+
+ quat_mi2s_active: quat_mi2s_active {
+ mux {
+ pins = "gpio58", "gpio59";
+ function = "qua_mi2s";
+ };
+
+ config {
+ pins = "gpio58", "gpio59";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep {
+ mux {
+ pins = "gpio60";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio60";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+
+ quat_mi2s_sd0_active: quat_mi2s_sd0_active {
+ mux {
+ pins = "gpio60";
+ function = "qua_mi2s";
+ };
+
+ config {
+ pins = "gpio60";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep {
+ mux {
+ pins = "gpio61";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio61";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+
+ quat_mi2s_sd1_active: quat_mi2s_sd1_active {
+ mux {
+ pins = "gpio61";
+ function = "qua_mi2s";
+ };
+
+ config {
+ pins = "gpio61";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ quat_mi2s_sd2_sleep: quat_mi2s_sd2_sleep {
+ mux {
+ pins = "gpio62";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio62";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+
+ quat_mi2s_sd2_active: quat_mi2s_sd2_active {
+ mux {
+ pins = "gpio62";
+ function = "qua_mi2s";
+ };
+
+ config {
+ pins = "gpio62";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ quat_mi2s_sd3_sleep: quat_mi2s_sd3_sleep {
+ mux {
+ pins = "gpio63";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio63";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+ };
+
+ quat_mi2s_sd3_active: quat_mi2s_sd3_active {
+ mux {
+ pins = "gpio63";
+ function = "qua_mi2s";
+ };
+
+ config {
+ pins = "gpio63";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
mss_pil: remoteproc@4080000 {
--
2.21.0
next prev parent reply other threads:[~2020-03-12 14:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 14:30 [PATCH v2 0/5] arm64: dts: qcom: sdm845: add audio support Srinivas Kandagatla
2020-03-12 14:30 ` [PATCH v2 1/5] arm64: dts: qcom: sdm845: add slimbus nodes Srinivas Kandagatla
2020-03-12 14:30 ` [PATCH v2 2/5] arm64: dts: qcom: sdm845: add apr nodes Srinivas Kandagatla
2020-03-12 14:30 ` [PATCH v2 3/5] arm64: dts: qcom: c630: Enable audio support Srinivas Kandagatla
2020-03-13 13:52 ` Vinod Koul
2020-03-12 14:30 ` Srinivas Kandagatla [this message]
2020-03-12 14:30 ` [PATCH v2 5/5] arm64: dts: qcom: db845c: add analog " Srinivas Kandagatla
2020-03-13 13:53 ` Vinod Koul
2020-03-13 13:54 ` [PATCH v2 0/5] arm64: dts: qcom: sdm845: add " Vinod Koul
2020-03-15 5:23 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312143024.11059-5-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).