LKML Archive on
 help / color / Atom feed
From: Wan Ahmad Zainie <>
Subject: [PATCH 0/2] phy: intel: Add Keem Bay eMMC PHY support
Date: Mon, 16 Mar 2020 18:37:24 +0800
Message-ID: <> (raw)


The first part is to document DT bindings for Keem Bay eMMC PHY.

The second is the driver file, loosely based on phy-rockchip-emmc.c
and phy-intel-emmc.c. The latter is not being reused as there are
quite a number of differences i.e. registers offset, supported clock
rates, bitfield to set.

The patch was tested with Keem Bay evaluation module board.

Thank you.

Best regards,

Wan Ahmad Zainie (2):
  dt-bindings: phy: intel: Add documentation for Keem Bay eMMC PHY
  phy: intel: Add Keem Bay eMMC PHY support

 .../bindings/phy/intel,keembay-emmc-phy.yaml  |  57 +++++
 drivers/phy/intel/Kconfig                     |   7 +
 drivers/phy/intel/Makefile                    |   1 +
 drivers/phy/intel/phy-keembay-emmc.c          | 231 ++++++++++++++++++
 4 files changed, 296 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml
 create mode 100644 drivers/phy/intel/phy-keembay-emmc.c


             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-16 10:37 Wan Ahmad Zainie [this message]
2020-03-16 10:37 ` [PATCH 1/2] dt-bindings: phy: intel: Add documentation for Keem Bay eMMC PHY Wan Ahmad Zainie
2020-03-20  5:58   ` Kishon Vijay Abraham I
2020-03-30 20:23   ` Rob Herring
2020-04-29  0:58     ` Wan Mohamad, Wan Ahmad Zainie
2020-03-16 10:37 ` [PATCH 2/2] phy: intel: Add Keem Bay eMMC PHY support Wan Ahmad Zainie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone