From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Ben Gardon <bgardon@google.com>,
Junaid Shahid <junaids@google.com>,
Liran Alon <liran.alon@oracle.com>,
Boris Ostrovsky <boris.ostrovsky@oracle.com>,
John Haxby <john.haxby@oracle.com>,
Miaohe Lin <linmiaohe@huawei.com>,
Tom Lendacky <thomas.lendacky@amd.com>
Subject: [PATCH v2 28/32] KVM: VMX: Retrieve APIC access page HPA only when necessary
Date: Mon, 16 Mar 2020 21:52:34 -0700 [thread overview]
Message-ID: <20200317045238.30434-29-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20200317045238.30434-1-sean.j.christopherson@intel.com>
Move the retrieval of the HPA associated with L1's APIC access page into
VMX code to avoid unnecessarily calling gfn_to_page(), e.g. when the
vCPU is in guest mode (L2). Alternatively, the optimization logic in
VMX could be mirrored into the common x86 code, but that will get ugly
fast when further optimizations are introduced.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/include/asm/kvm_host.h | 2 +-
arch/x86/kvm/vmx/vmx.c | 16 ++++++++++++++--
arch/x86/kvm/x86.c | 13 +------------
3 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 26fa52450569..31aa93088bf9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1154,7 +1154,7 @@ struct kvm_x86_ops {
bool (*guest_apic_has_interrupt)(struct kvm_vcpu *vcpu);
void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
void (*set_virtual_apic_mode)(struct kvm_vcpu *vcpu);
- void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu, hpa_t hpa);
+ void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu);
int (*deliver_posted_interrupt)(struct kvm_vcpu *vcpu, int vector);
int (*sync_pir_to_irr)(struct kvm_vcpu *vcpu);
int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 3155329bf844..e8d409b50afd 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6136,16 +6136,28 @@ void vmx_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
vmx_update_msr_bitmap(vcpu);
}
-static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu, hpa_t hpa)
+static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu)
{
+ struct page *page;
+
/* Defer reload until vmcs01 is the current VMCS. */
if (is_guest_mode(vcpu)) {
to_vmx(vcpu)->nested.reload_vmcs01_apic_access_page = true;
return;
}
- vmcs_write64(APIC_ACCESS_ADDR, hpa);
+ page = gfn_to_page(vcpu->kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT);
+ if (is_error_page(page))
+ return;
+
+ vmcs_write64(APIC_ACCESS_ADDR, page_to_phys(page));
vmx_flush_tlb_current(vcpu);
+
+ /*
+ * Do not pin apic access page in memory, the MMU notifier
+ * will call us again if it is migrated or swapped out.
+ */
+ put_page(page);
}
static void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cccfcf612008..26c24af87cca 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8157,24 +8157,13 @@ int kvm_arch_mmu_notifier_invalidate_range(struct kvm *kvm,
void kvm_vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu)
{
- struct page *page = NULL;
-
if (!lapic_in_kernel(vcpu))
return;
if (!kvm_x86_ops->set_apic_access_page_addr)
return;
- page = gfn_to_page(vcpu->kvm, APIC_DEFAULT_PHYS_BASE >> PAGE_SHIFT);
- if (is_error_page(page))
- return;
- kvm_x86_ops->set_apic_access_page_addr(vcpu, page_to_phys(page));
-
- /*
- * Do not pin apic access page in memory, the MMU notifier
- * will call us again if it is migrated or swapped out.
- */
- put_page(page);
+ kvm_x86_ops->set_apic_access_page_addr(vcpu);
}
void __kvm_request_immediate_exit(struct kvm_vcpu *vcpu)
--
2.24.1
next prev parent reply other threads:[~2020-03-17 4:54 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-17 4:52 [PATCH v2 00/32] KVM: x86: TLB flushing fixes and enhancements Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 01/32] KVM: VMX: Flush all EPTP/VPID contexts on remote TLB flush Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 02/32] KVM: nVMX: Validate the EPTP when emulating INVEPT(EXTENT_CONTEXT) Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 03/32] KVM: nVMX: Invalidate all EPTP contexts when emulating INVEPT for L1 Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 04/32] KVM: nVMX: Invalidate all L2 roots when emulating INVVPID without EPT Sean Christopherson
2020-03-20 4:11 ` Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 05/32] KVM: x86: Export kvm_propagate_fault() (as kvm_inject_emulated_page_fault) Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 06/32] KVM: x86: Consolidate logic for injecting page faults to L1 Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 07/32] KVM: x86: Sync SPTEs when injecting page/EPT fault into L1 Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 08/32] KVM: VMX: Skip global INVVPID fallback if vpid==0 in vpid_sync_context() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 09/32] KVM: VMX: Use vpid_sync_context() directly when possible Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 10/32] KVM: VMX: Move vpid_sync_vcpu_addr() down a few lines Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 11/32] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 12/32] KVM: VMX: Drop redundant capability checks in low level INVVPID helpers Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 13/32] KVM: nVMX: Use vpid_sync_vcpu_addr() to emulate INVVPID with address Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 14/32] KVM: x86: Move "flush guest's TLB" logic to separate kvm_x86_ops hook Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 15/32] KVM: VMX: Clean up vmx_flush_tlb_gva() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 16/32] KVM: x86: Drop @invalidate_gpa param from kvm_x86_ops' tlb_flush() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 17/32] KVM: SVM: Wire up ->tlb_flush_guest() directly to svm_flush_tlb() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 18/32] KVM: VMX: Move vmx_flush_tlb() to vmx.c Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 19/32] KVM: nVMX: Move nested_get_vpid02() to vmx/nested.h Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 20/32] KVM: VMX: Introduce vmx_flush_tlb_current() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 21/32] KVM: SVM: Document the ASID logic in svm_flush_tlb() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 22/32] KVM: x86: Rename ->tlb_flush() to ->tlb_flush_all() Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 23/32] KVM: nVMX: Add helper to handle TLB flushes on nested VM-Enter/VM-Exit Sean Christopherson
2020-03-17 17:17 ` Paolo Bonzini
2020-03-17 18:18 ` Sean Christopherson
2020-03-18 10:45 ` Paolo Bonzini
2020-03-18 16:09 ` Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 24/32] KVM: x86: Introduce KVM_REQ_TLB_FLUSH_CURRENT to flush current ASID Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 25/32] KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 26/32] KVM: nVMX: Selectively use TLB_FLUSH_CURRENT for nested VM-Enter/VM-Exit Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 27/32] KVM: nVMX: Reload APIC access page on nested VM-Exit only if necessary Sean Christopherson
2020-03-17 4:52 ` Sean Christopherson [this message]
2020-03-17 4:52 ` [PATCH v2 29/32] KVM: VMX: Don't reload APIC access page if its control is disabled Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 30/32] KVM: x86/mmu: Add module param to force TLB flush on root reuse Sean Christopherson
2020-03-17 4:52 ` [PATCH v2 31/32] KVM: nVMX: Don't flush TLB on nested VM transition with EPT enabled Sean Christopherson
2020-03-17 17:18 ` Paolo Bonzini
2020-03-17 18:22 ` Sean Christopherson
2020-03-18 10:36 ` Paolo Bonzini
2020-03-18 17:02 ` Sean Christopherson
2020-03-18 17:11 ` Paolo Bonzini
2020-03-18 17:26 ` Sean Christopherson
2020-03-18 17:38 ` Paolo Bonzini
2020-03-17 4:52 ` [PATCH v2 32/32] KVM: nVMX: Free only the affected contexts when emulating INVEPT Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200317045238.30434-29-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=bgardon@google.com \
--cc=boris.ostrovsky@oracle.com \
--cc=jmattson@google.com \
--cc=john.haxby@oracle.com \
--cc=joro@8bytes.org \
--cc=junaids@google.com \
--cc=kvm@vger.kernel.org \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=liran.alon@oracle.com \
--cc=pbonzini@redhat.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).