linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Marek Vasut <marex@denx.de>,
	"David S. Miller" <davem@davemloft.net>,
	Lukas Wunner <lukas@wunner.de>, Petr Stetiar <ynezz@true.cz>,
	YueHaibing <yuehaibing@huawei.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.19 16/48] net: ks8851-ml: Fix IRQ handling and locking
Date: Thu, 19 Mar 2020 14:03:58 +0100	[thread overview]
Message-ID: <20200319123908.160054078@linuxfoundation.org> (raw)
In-Reply-To: <20200319123902.941451241@linuxfoundation.org>

From: Marek Vasut <marex@denx.de>

[ Upstream commit 44343418d0f2f623cb9da6f5000df793131cbe3b ]

The KS8851 requires that packet RX and TX are mutually exclusive.
Currently, the driver hopes to achieve this by disabling interrupt
from the card by writing the card registers and by disabling the
interrupt on the interrupt controller. This however is racy on SMP.

Replace this approach by expanding the spinlock used around the
ks_start_xmit() TX path to ks_irq() RX path to assure true mutual
exclusion and remove the interrupt enabling/disabling, which is
now not needed anymore. Furthermore, disable interrupts also in
ks_net_stop(), which was missing before.

Note that a massive improvement here would be to re-use the KS8851
driver approach, which is to move the TX path into a worker thread,
interrupt handling to threaded interrupt, and synchronize everything
with mutexes, but that would be a much bigger rework, for a separate
patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8851_mll.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 9de59facec218..a5525bf977e2c 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -832,14 +832,17 @@ static irqreturn_t ks_irq(int irq, void *pw)
 {
 	struct net_device *netdev = pw;
 	struct ks_net *ks = netdev_priv(netdev);
+	unsigned long flags;
 	u16 status;
 
+	spin_lock_irqsave(&ks->statelock, flags);
 	/*this should be the first in IRQ handler */
 	ks_save_cmd_reg(ks);
 
 	status = ks_rdreg16(ks, KS_ISR);
 	if (unlikely(!status)) {
 		ks_restore_cmd_reg(ks);
+		spin_unlock_irqrestore(&ks->statelock, flags);
 		return IRQ_NONE;
 	}
 
@@ -865,6 +868,7 @@ static irqreturn_t ks_irq(int irq, void *pw)
 		ks->netdev->stats.rx_over_errors++;
 	/* this should be the last in IRQ handler*/
 	ks_restore_cmd_reg(ks);
+	spin_unlock_irqrestore(&ks->statelock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -934,6 +938,7 @@ static int ks_net_stop(struct net_device *netdev)
 
 	/* shutdown RX/TX QMU */
 	ks_disable_qmu(ks);
+	ks_disable_int(ks);
 
 	/* set powermode to soft power down to save power */
 	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
@@ -990,10 +995,9 @@ static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	netdev_tx_t retv = NETDEV_TX_OK;
 	struct ks_net *ks = netdev_priv(netdev);
+	unsigned long flags;
 
-	disable_irq(netdev->irq);
-	ks_disable_int(ks);
-	spin_lock(&ks->statelock);
+	spin_lock_irqsave(&ks->statelock, flags);
 
 	/* Extra space are required:
 	*  4 byte for alignment, 4 for status/length, 4 for CRC
@@ -1007,9 +1011,7 @@ static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		dev_kfree_skb(skb);
 	} else
 		retv = NETDEV_TX_BUSY;
-	spin_unlock(&ks->statelock);
-	ks_enable_int(ks);
-	enable_irq(netdev->irq);
+	spin_unlock_irqrestore(&ks->statelock, flags);
 	return retv;
 }
 
-- 
2.20.1




  parent reply	other threads:[~2020-03-19 13:30 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-19 13:03 [PATCH 4.19 00/48] 4.19.112-rc1 review Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 01/48] perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 02/48] mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 03/48] mmc: sdhci-omap: Add platform specific reset callback Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 04/48] mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929) Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 05/48] mmc: host: Fix Kconfig warnings on keystone_defconfig Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 06/48] mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 07/48] mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 08/48] mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 09/48] mmc: core: Allow host controllers to require R1B for CMD6 Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 10/48] ACPI: watchdog: Allow disabling WDAT at boot Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 11/48] HID: apple: Add support for recent firmware on Magic Keyboards Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 12/48] HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 13/48] cfg80211: check reg_rule for NULL in handle_channel_custom() Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 14/48] scsi: libfc: free response frame from GPN_ID Greg Kroah-Hartman
2020-03-19 13:03 ` [PATCH 4.19 15/48] net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch Greg Kroah-Hartman
2020-03-19 13:03 ` Greg Kroah-Hartman [this message]
2020-03-19 13:03 ` [PATCH 4.19 17/48] mac80211: rx: avoid RCU list traversal under mutex Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 18/48] signal: avoid double atomic counter increments for user accounting Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 19/48] slip: not call free_netdev before rtnl_unlock in slip_open Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 20/48] hinic: fix a irq affinity bug Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 21/48] hinic: fix a bug of setting hw_ioctxt Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 22/48] net: rmnet: fix NULL pointer dereference in rmnet_newlink() Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 23/48] net: rmnet: fix NULL pointer dereference in rmnet_changelink() Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 24/48] net: rmnet: fix suspicious RCU usage Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 25/48] net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device() Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 26/48] net: rmnet: do not allow to change mux id if mux id is duplicated Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 27/48] net: rmnet: use upper/lower device infrastructure Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 28/48] net: rmnet: fix bridge mode bugs Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 29/48] net: rmnet: fix packet forwarding in rmnet bridge mode Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 30/48] sfc: fix timestamp reconstruction at 16-bit rollover points Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 31/48] jbd2: fix data races at struct journal_head Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 32/48] wimax: i2400: fix memory leak Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 33/48] wimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 34/48] mmc: sdhci-omap: Dont finish_mrq() on a command error during tuning Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 35/48] mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 36/48] driver core: Remove the link if there is no driver with AUTO flag Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 37/48] driver core: Fix adding device links to probing suppliers Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 38/48] driver core: Make driver core own stateful device links Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 39/48] driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 40/48] driver core: Remove device link creation limitation Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 41/48] driver core: Fix creation of device links with PM-runtime flags Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 42/48] net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 43/48] ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional() Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 44/48] ARM: 8958/1: rename missed uaccess .fixup section Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 45/48] mm: slub: add missing TID bump in kmem_cache_alloc_bulk() Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 46/48] HID: google: add moonball USB id Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 47/48] efi: Fix debugobjects warning on efi_rts_work Greg Kroah-Hartman
2020-03-19 13:04 ` [PATCH 4.19 48/48] ipv4: ensure rcu_read_lock() in cipso_v4_error() Greg Kroah-Hartman
2020-03-19 19:42 ` [PATCH 4.19 00/48] 4.19.112-rc1 review Naresh Kamboju
2020-03-19 20:00   ` Ben Hutchings
2020-03-20  8:03     ` Greg Kroah-Hartman
2020-03-20  8:11       ` Greg Kroah-Hartman
2020-03-20 16:41         ` Naresh Kamboju
2020-03-21  7:09           ` Greg Kroah-Hartman
2020-03-20 17:58         ` Guenter Roeck
2020-03-21  7:08           ` Greg Kroah-Hartman
2020-03-22  1:25       ` Sasha Levin
2020-03-19 23:36 ` Guenter Roeck
2020-03-20 21:01 ` Chris Paterson
2020-03-21  7:13   ` Greg Kroah-Hartman
2020-03-21  0:40 ` shuah

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200319123908.160054078@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=marex@denx.de \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=ynezz@true.cz \
    --cc=yuehaibing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).