linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ben Gardon <bgardon@google.com>,
	Junaid Shahid <junaids@google.com>,
	Liran Alon <liran.alon@oracle.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	John Haxby <john.haxby@oracle.com>,
	Miaohe Lin <linmiaohe@huawei.com>,
	Tom Lendacky <thomas.lendacky@amd.com>
Subject: [PATCH v3 09/37] KVM: VMX: Use vpid_sync_context() directly when possible
Date: Fri, 20 Mar 2020 14:28:05 -0700	[thread overview]
Message-ID: <20200320212833.3507-10-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20200320212833.3507-1-sean.j.christopherson@intel.com>

Use vpid_sync_context() directly for flows that run if and only if
enable_vpid=1, or more specifically, nested VMX flows that are gated by
vmx->nested.msrs.secondary_ctls_high.SECONDARY_EXEC_ENABLE_VPID being
set, which is allowed if and only if enable_vpid=1.  Because these flows
call __vmx_flush_tlb() with @invalidate_gpa=false, the if-statement that
decides between INVEPT and INVVPID will always go down the INVVPID path,
i.e. call vpid_sync_context() because
"enable_ept && (invalidate_gpa || !enable_vpid)" always evaluates false.

This helps pave the way toward removing @invalidate_gpa and @vpid from
__vmx_flush_tlb() and its callers.

Opportunstically drop unnecessary brackets in handle_invvpid() around an
affected __vmx_flush_tlb()->vpid_sync_context() conversion.

No functional change intended.

Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
 arch/x86/kvm/vmx/nested.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 5554727d7ba8..81bc4791d704 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2481,7 +2481,7 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 		if (nested_cpu_has_vpid(vmcs12) && nested_has_guest_tlb_tag(vcpu)) {
 			if (vmcs12->virtual_processor_id != vmx->nested.last_vpid) {
 				vmx->nested.last_vpid = vmcs12->virtual_processor_id;
-				__vmx_flush_tlb(vcpu, nested_get_vpid02(vcpu), false);
+				vpid_sync_context(nested_get_vpid02(vcpu));
 			}
 		} else {
 			/*
@@ -5251,21 +5251,21 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 		    is_noncanonical_address(operand.gla, vcpu))
 			return nested_vmx_failValid(vcpu,
 				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
-		if (cpu_has_vmx_invvpid_individual_addr()) {
+		if (cpu_has_vmx_invvpid_individual_addr())
 			__invvpid(VMX_VPID_EXTENT_INDIVIDUAL_ADDR,
 				vpid02, operand.gla);
-		} else
-			__vmx_flush_tlb(vcpu, vpid02, false);
+		else
+			vpid_sync_context(vpid02);
 		break;
 	case VMX_VPID_EXTENT_SINGLE_CONTEXT:
 	case VMX_VPID_EXTENT_SINGLE_NON_GLOBAL:
 		if (!operand.vpid)
 			return nested_vmx_failValid(vcpu,
 				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
-		__vmx_flush_tlb(vcpu, vpid02, false);
+		vpid_sync_context(vpid02);
 		break;
 	case VMX_VPID_EXTENT_ALL_CONTEXT:
-		__vmx_flush_tlb(vcpu, vpid02, false);
+		vpid_sync_context(vpid02);
 		break;
 	default:
 		WARN_ON_ONCE(1);
-- 
2.24.1


  parent reply	other threads:[~2020-03-20 21:31 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 21:27 [PATCH v3 00/37] KVM: x86: TLB flushing fixes and enhancements Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 01/37] KVM: VMX: Flush all EPTP/VPID contexts on remote TLB flush Sean Christopherson
2021-08-03  1:45   ` Lai Jiangshan
2021-08-03 15:39     ` Sean Christopherson
2021-08-04  3:11       ` Lai Jiangshan
2021-08-04 15:33         ` Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 02/37] KVM: nVMX: Validate the EPTP when emulating INVEPT(EXTENT_CONTEXT) Sean Christopherson
2020-03-23 14:51   ` Vitaly Kuznetsov
2020-03-23 15:45     ` Sean Christopherson
2020-03-23 23:46       ` Paolo Bonzini
2020-03-20 21:27 ` [PATCH v3 03/37] KVM: nVMX: Invalidate all EPTP contexts when emulating INVEPT for L1 Sean Christopherson
2020-03-23 15:24   ` Vitaly Kuznetsov
2020-03-23 15:53     ` Sean Christopherson
2020-03-23 16:24   ` Jim Mattson
2020-03-23 16:28     ` Sean Christopherson
2020-03-23 16:36       ` Jim Mattson
2020-03-23 16:44         ` Sean Christopherson
2020-03-23 23:50           ` Paolo Bonzini
2020-03-24  0:12             ` Jim Mattson
2020-03-30 18:38               ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 04/37] KVM: nVMX: Invalidate all roots when emulating INVVPID without EPT Sean Christopherson
2020-03-23 15:34   ` Vitaly Kuznetsov
2020-03-23 16:04     ` Sean Christopherson
2020-03-23 16:33       ` Vitaly Kuznetsov
2020-03-23 16:50         ` Sean Christopherson
2020-03-23 16:57           ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 05/37] KVM: x86: Export kvm_propagate_fault() (as kvm_inject_emulated_page_fault) Sean Christopherson
2020-03-23 15:47   ` Vitaly Kuznetsov
2020-03-23 16:24     ` Sean Christopherson
2020-03-23 23:56       ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 06/37] KVM: x86: Consolidate logic for injecting page faults to L1 Sean Christopherson
2020-03-24  0:47   ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 07/37] KVM: x86: Sync SPTEs when injecting page/EPT fault into L1 Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 08/37] KVM: VMX: Skip global INVVPID fallback if vpid==0 in vpid_sync_context() Sean Christopherson
2020-03-25  9:33   ` Vitaly Kuznetsov
2020-03-20 21:28 ` Sean Christopherson [this message]
2020-03-20 21:28 ` [PATCH v3 10/37] KVM: VMX: Move vpid_sync_vcpu_addr() down a few lines Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 11/37] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 12/37] KVM: VMX: Drop redundant capability checks in low level INVVPID helpers Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 13/37] KVM: nVMX: Use vpid_sync_vcpu_addr() to emulate INVVPID with address Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 14/37] KVM: x86: Move "flush guest's TLB" logic to separate kvm_x86_ops hook Sean Christopherson
2020-03-25 10:23   ` Vitaly Kuznetsov
2020-03-25 15:41     ` Paolo Bonzini
2020-03-25 16:08       ` Vitaly Kuznetsov
2020-03-25 15:48     ` Sean Christopherson
2020-03-25 16:11       ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 15/37] KVM: VMX: Clean up vmx_flush_tlb_gva() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 16/37] KVM: x86: Drop @invalidate_gpa param from kvm_x86_ops' tlb_flush() Sean Christopherson
2020-03-25 11:23   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 17/37] KVM: SVM: Wire up ->tlb_flush_guest() directly to svm_flush_tlb() Sean Christopherson
2020-03-25 11:23   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 18/37] KVM: VMX: Move vmx_flush_tlb() to vmx.c Sean Christopherson
2020-03-25 11:25   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 19/37] KVM: nVMX: Move nested_get_vpid02() to vmx/nested.h Sean Christopherson
2020-03-25 11:25   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 20/37] KVM: VMX: Introduce vmx_flush_tlb_current() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 21/37] KVM: SVM: Document the ASID logic in svm_flush_tlb() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 22/37] KVM: x86: Rename ->tlb_flush() to ->tlb_flush_all() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 23/37] KVM: nVMX: Add helper to handle TLB flushes on nested VM-Enter/VM-Exit Sean Christopherson
2021-10-28 13:11   ` Lai Jiangshan
2021-10-28 15:22     ` Sean Christopherson
2021-10-29  0:44       ` Lai Jiangshan
2021-10-29 17:10         ` Sean Christopherson
2021-10-30  1:34           ` Lai Jiangshan
2021-11-04 17:47             ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 24/37] KVM: x86: Introduce KVM_REQ_TLB_FLUSH_CURRENT to flush current ASID Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 25/37] KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 26/37] KVM: nVMX: Selectively use TLB_FLUSH_CURRENT for nested VM-Enter/VM-Exit Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 27/37] KVM: nVMX: Reload APIC access page on nested VM-Exit only if necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 28/37] KVM: VMX: Retrieve APIC access page HPA only when necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 29/37] KVM: VMX: Don't reload APIC access page if its control is disabled Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 30/37] KVM: x86/mmu: Move fast_cr3_switch() side effects to __kvm_mmu_new_cr3() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 31/37] KVM: x86/mmu: Add separate override for MMU sync during fast CR3 switch Sean Christopherson
2020-03-24 11:07   ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 32/37] KVM: x86/mmu: Add module param to force TLB flush on root reuse Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 33/37] KVM: nVMX: Skip MMU sync on nested VMX transition when possible Sean Christopherson
2020-03-24 11:19   ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 34/37] KVM: nVMX: Don't flush TLB on nested VMX transition Sean Christopherson
2020-03-24 11:20   ` Paolo Bonzini
2020-03-24 18:10     ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 35/37] KVM: nVMX: Free only the affected contexts when emulating INVEPT Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 36/37] KVM: x86: Replace "cr3" with "pgd" in "new cr3/pgd" related code Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 37/37] KVM: VMX: Clean cr3/pgd handling in vmx_load_mmu_pgd() Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200320212833.3507-10-sean.j.christopherson@intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=bgardon@google.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jmattson@google.com \
    --cc=john.haxby@oracle.com \
    --cc=joro@8bytes.org \
    --cc=junaids@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linmiaohe@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liran.alon@oracle.com \
    --cc=pbonzini@redhat.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).