[PATCH 4/5] nvmem: mxs-ocotp: Use devm_add_action_or_reset() for cleanup

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

From: Anson Huang <Anson.Huang@nxp.com>

Use devm_add_action_or_reset() for cleanup to call clk_unprepare(),
which can simplify the error handling in .probe, and .remove callback
can be dropped.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/nvmem/mxs-ocotp.c | 30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
index 8e4898dec002..588ab56d75b7 100644
--- a/drivers/nvmem/mxs-ocotp.c
+++ b/drivers/nvmem/mxs-ocotp.c
@@ -130,6 +130,11 @@ static const struct of_device_id mxs_ocotp_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
 
+static void mxs_ocotp_action(void *data)
+{
+	clk_unprepare(data);
+}
+
 static int mxs_ocotp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -160,39 +165,26 @@ static int mxs_ocotp_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(&pdev->dev, mxs_ocotp_action, otp->clk);
+	if (ret)
+		return ret;
+
 	data = match->data;
 
 	ocotp_config.size = data->size;
 	ocotp_config.priv = otp;
 	ocotp_config.dev = dev;
 	otp->nvmem = devm_nvmem_register(dev, &ocotp_config);
-	if (IS_ERR(otp->nvmem)) {
-		ret = PTR_ERR(otp->nvmem);
-		goto err_clk;
-	}
+	if (IS_ERR(otp->nvmem))
+		return PTR_ERR(otp->nvmem);
 
 	platform_set_drvdata(pdev, otp);
 
-	return 0;
-
-err_clk:
-	clk_unprepare(otp->clk);
-
-	return ret;
-}
-
-static int mxs_ocotp_remove(struct platform_device *pdev)
-{
-	struct mxs_ocotp *otp = platform_get_drvdata(pdev);
-
-	clk_unprepare(otp->clk);
-
 	return 0;
 }
 
 static struct platform_driver mxs_ocotp_driver = {
 	.probe = mxs_ocotp_probe,
-	.remove = mxs_ocotp_remove,
 	.driver = {
 		.name = "mxs-ocotp",
 		.of_match_table = mxs_ocotp_match,
-- 
2.21.0