LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: linux-leds@vger.kernel.org
Cc: Dan Murphy <dmurphy@ti.com>, Heiko Stuebner <heiko@sntech.de>,
	Icenowy Zheng <icenowy@aosc.io>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <mripard@kernel.org>, Pavel Machek <pavel@ucw.cz>,
	Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Luca Weiss <luca@z3ntu.xyz>
Subject: [PATCH v2 1/2] dt-bindings: leds: Add binding for sgm3140
Date: Mon, 30 Mar 2020 21:47:56 +0200
Message-ID: <20200330194757.2645388-2-luca@z3ntu.xyz> (raw)
In-Reply-To: <20200330194757.2645388-1-luca@z3ntu.xyz>

Add YAML devicetree binding for SGMICRO SGM3140 charge pump used for
camera flash LEDs.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes since v1:
- Add vin-supply
- Add led subnode (common.yaml)

 .../bindings/leds/leds-sgm3140.yaml           | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-sgm3140.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
new file mode 100644
index 000000000000..24ca178e5d0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver
+
+maintainers:
+  - Luca Weiss <luca@z3ntu.xyz>
+
+description: |
+  The SGM3140 is a current-regulated charge pump which can regulate two current
+  levels for Flash and Torch modes.
+
+  The data sheet can be found at:
+    http://www.sg-micro.com/uploads/soft/20190626/1561535688.pdf
+
+properties:
+  compatible:
+    const: sgmicro,sgm3140
+
+  enable-gpios:
+    maxItems: 1
+    description: A connection to the 'EN' pin.
+
+  flash-gpios:
+    maxItems: 1
+    description: A connection to the 'FLASH' pin.
+
+  vin-supply:
+    description: Regulator providing power to the 'VIN' pin.
+
+  led:
+    allOf:
+      - $ref: common.yaml#
+
+required:
+  - compatible
+  - flash-gpios
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    sgm3140 {
+        compatible = "sgmicro,sgm3140";
+        flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+        enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+        vin-supply = <&reg_dcdc1>;
+
+        sgm3140_flash: led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+        };
+    };
-- 
2.26.0


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-30 19:47 [PATCH v2 0/2] Add sgm3140 flash led driver Luca Weiss
2020-03-30 19:47 ` Luca Weiss [this message]
2020-04-03 17:21   ` [PATCH v2 1/2] dt-bindings: leds: Add binding for sgm3140 Dan Murphy
2020-04-10 17:41   ` Rob Herring
2020-03-30 19:47 ` [PATCH v2 2/2] leds: add sgm3140 driver Luca Weiss
2020-04-03 17:31   ` Dan Murphy
2020-04-04  9:36     ` Luca Weiss
2020-04-04 13:56       ` Dan Murphy
2020-04-04  9:58   ` Andy Shevchenko
2020-04-05 18:45     ` Luca Weiss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200330194757.2645388-2-luca@z3ntu.xyz \
    --to=luca@z3ntu.xyz \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=heiko@sntech.de \
    --cc=icenowy@aosc.io \
    --cc=jacek.anaszewski@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git