From: amirmizi6@gmail.com
To: Eyal.Cohen@nuvoton.com, jarkko.sakkinen@linux.intel.com,
oshrialkoby85@gmail.com, alexander.steffen@infineon.com,
robh+dt@kernel.org, mark.rutland@arm.com, peterhuewe@gmx.de,
jgg@ziepe.ca, arnd@arndb.de, gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-integrity@vger.kernel.org, oshri.alkoby@nuvoton.com,
tmaimon77@gmail.com, gcwilson@us.ibm.com, kgoldman@us.ibm.com,
Dan.Morav@nuvoton.com, oren.tanami@nuvoton.com,
shmulik.hager@nuvoton.com, amir.mizinski@nuvoton.com,
Amir Mizinski <amirmizi6@gmail.com>,
Christophe Ricard <christophe-h.ricard@st.com>
Subject: [PATCH v6 2/7] tpm: tpm_tis: Add check_data handle to tpm_tis_phy_ops
Date: Tue, 7 Apr 2020 19:20:39 +0300 [thread overview]
Message-ID: <20200407162044.168890-3-amirmizi6@gmail.com> (raw)
In-Reply-To: <20200407162044.168890-1-amirmizi6@gmail.com>
From: Amir Mizinski <amirmizi6@gmail.com>
In order to validate data integrity we need to compute the crc over the data
sent in lower layer (I2C for instance).
To do that tpm_tis_check_data() calls a "check_data" operation (if available).
If data integrity check fails, a retry to save the sent/received
data is implemented in tpm_tis_send_main()/tpm_tis_recv() functions.
Considering this commit, the following steps are done when sending a command:
1. Host writes to TPM_STS.commandReady.
2. Host writes command.
3. Host checks that TPM received data is valid.
4. If data is currupted go to step 1.
When receiving data:
1. Host checks that TPM_STS.dataAvail is set.
2. Host saves received data.
3. Host checks that received data is correct.
4. If data is currupted Host writes to TPM_STS.responseRetry and go to
step 1.
Co-developed-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
---
drivers/char/tpm/tpm_tis_core.c | 102 +++++++++++++++++++++++++---------------
drivers/char/tpm/tpm_tis_core.h | 3 ++
2 files changed, 67 insertions(+), 38 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 27c6ca0..6c4f232 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -242,6 +242,15 @@ static u8 tpm_tis_status(struct tpm_chip *chip)
return status;
}
+static bool tpm_tis_check_data(struct tpm_chip *chip, const u8 *buf, size_t len)
+{
+ struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+
+ if (priv->phy_ops->check_data)
+ return priv->phy_ops->check_data(priv, buf, len);
+ return true;
+}
+
static void tpm_tis_ready(struct tpm_chip *chip)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
@@ -308,47 +317,59 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int size = 0;
- int status;
+ int status, i;
u32 expected;
+ bool check_data = false;
- if (count < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
+ for (i = 0; i < TPM_RETRY; i++) {
+ if (count < TPM_HEADER_SIZE) {
+ size = -EIO;
+ goto out;
+ }
- size = recv_data(chip, buf, TPM_HEADER_SIZE);
- /* read first 10 bytes, including tag, paramsize, and result */
- if (size < TPM_HEADER_SIZE) {
- dev_err(&chip->dev, "Unable to read header\n");
- goto out;
- }
+ size = recv_data(chip, buf, TPM_HEADER_SIZE);
+ /* read first 10 bytes, including tag, paramsize, and result */
+ if (size < TPM_HEADER_SIZE) {
+ dev_err(&chip->dev, "Unable to read header\n");
+ goto out;
+ }
- expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count || expected < TPM_HEADER_SIZE) {
- size = -EIO;
- goto out;
- }
+ expected = be32_to_cpu(*(__be32 *) (buf + 2));
+ if (expected > count || expected < TPM_HEADER_SIZE) {
+ size = -EIO;
+ goto out;
+ }
- size += recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE);
- if (size < expected) {
- dev_err(&chip->dev, "Unable to read remainder of result\n");
- size = -ETIME;
- goto out;
- }
+ size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+ expected - TPM_HEADER_SIZE);
+ if (size < expected) {
+ dev_err(&chip->dev, "Unable to read remainder of result\n");
+ size = -ETIME;
+ goto out;
+ }
- if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
- &priv->int_queue, false) < 0) {
- size = -ETIME;
- goto out;
+ if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+ &priv->int_queue, false) < 0) {
+ size = -ETIME;
+ goto out;
+ }
+
+ status = tpm_tis_status(chip);
+ if (status & TPM_STS_DATA_AVAIL) { /* retry? */
+ dev_err(&chip->dev, "Error left over data\n");
+ size = -EIO;
+ goto out;
+ }
+
+ check_data = tpm_tis_check_data(chip, buf, size);
+ if (!check_data)
+ tpm_tis_write8(priv, TPM_STS(priv->locality),
+ TPM_STS_RESPONSE_RETRY);
+ else
+ break;
}
- status = tpm_tis_status(chip);
- if (status & TPM_STS_DATA_AVAIL) { /* retry? */
- dev_err(&chip->dev, "Error left over data\n");
+ if (!check_data)
size = -EIO;
- goto out;
- }
-
out:
tpm_tis_ready(chip);
return size;
@@ -453,14 +474,19 @@ static void disable_interrupts(struct tpm_chip *chip)
static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
- int rc;
+ int rc, i;
u32 ordinal;
unsigned long dur;
+ bool data_valid = false;
- rc = tpm_tis_send_data(chip, buf, len);
- if (rc < 0)
- return rc;
-
+ for (i = 0; i < TPM_RETRY && !data_valid; i++) {
+ rc = tpm_tis_send_data(chip, buf, len);
+ if (rc < 0)
+ return rc;
+ data_valid = tpm_tis_check_data(chip, buf, len);
+ }
+ if (!data_valid)
+ return -EIO;
/* go and do it */
rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
if (rc < 0)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index d06c65b..486c2e9 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -34,6 +34,7 @@ enum tis_status {
TPM_STS_GO = 0x20,
TPM_STS_DATA_AVAIL = 0x10,
TPM_STS_DATA_EXPECT = 0x08,
+ TPM_STS_RESPONSE_RETRY = 0x02,
};
enum tis_int_flags {
@@ -106,6 +107,8 @@ struct tpm_tis_phy_ops {
int (*read16)(struct tpm_tis_data *data, u32 addr, u16 *result);
int (*read32)(struct tpm_tis_data *data, u32 addr, u32 *result);
int (*write32)(struct tpm_tis_data *data, u32 addr, u32 src);
+ bool (*check_data)(struct tpm_tis_data *data, const u8 *buf,
+ size_t len);
};
static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
--
2.7.4
next prev parent reply other threads:[~2020-04-07 16:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-07 16:20 [PATCH v6 0/7] Add tpm i2c ptp driver amirmizi6
2020-04-07 16:20 ` [PATCH v6 1/7] tpm: tpm_tis: Make implementation of read16 read32 write32 optional amirmizi6
2020-04-08 16:46 ` Jarkko Sakkinen
2020-04-07 16:20 ` amirmizi6 [this message]
2020-04-08 18:33 ` [PATCH v6 2/7] tpm: tpm_tis: Add check_data handle to tpm_tis_phy_ops Jarkko Sakkinen
[not found] ` <CAMHTsUUzQ9rpPfsnEtJruAC3THr+XNA=5Wk7OCteqZXOQ0L=UA@mail.gmail.com>
2020-04-12 13:53 ` Jarkko Sakkinen
2020-04-21 13:34 ` Amir Mizinski
2020-04-21 20:19 ` Jarkko Sakkinen
2020-04-07 16:20 ` [PATCH v6 3/7] tpm: tpm_tis: rewrite "tpm_tis_req_canceled()" amirmizi6
2020-04-07 16:20 ` [PATCH v6 4/7] tpm: tpm_tis: Fix expected bit handling and send all bytes in one shot without last byte in exception amirmizi6
2020-04-07 16:20 ` [PATCH v6 5/7] tpm: Handle an exception for TPM Firmware Update mode amirmizi6
2020-04-07 16:20 ` [PATCH v6 6/7] dt-bindings: tpm: Add YAML schema for TPM TIS I2C options amirmizi6
2020-04-15 15:20 ` Rob Herring
2020-04-22 8:15 ` Amir Mizinski
2020-04-07 16:20 ` [PATCH v6 7/7] tpm: tpm_tis: add tpm_tis_i2c driver amirmizi6
2020-04-08 18:36 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200407162044.168890-3-amirmizi6@gmail.com \
--to=amirmizi6@gmail.com \
--cc=Dan.Morav@nuvoton.com \
--cc=Eyal.Cohen@nuvoton.com \
--cc=alexander.steffen@infineon.com \
--cc=amir.mizinski@nuvoton.com \
--cc=arnd@arndb.de \
--cc=christophe-h.ricard@st.com \
--cc=devicetree@vger.kernel.org \
--cc=gcwilson@us.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgg@ziepe.ca \
--cc=kgoldman@us.ibm.com \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=oren.tanami@nuvoton.com \
--cc=oshri.alkoby@nuvoton.com \
--cc=oshrialkoby85@gmail.com \
--cc=peterhuewe@gmx.de \
--cc=robh+dt@kernel.org \
--cc=shmulik.hager@nuvoton.com \
--cc=tmaimon77@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).