From: Jitao Shi <jitao.shi@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Cc: <linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <yingjoe.chen@mediatek.com>,
<eddie.huang@mediatek.com>, <cawa.cheng@mediatek.com>,
<bibby.hsieh@mediatek.com>, <ck.hu@mediatek.com>,
<stonea168@163.com>, <huijuan.xie@mediatek.com>,
Jitao Shi <jitao.shi@mediatek.com>
Subject: [PATCH v5 4/4] drm/mediatek: config mipitx impedance with calibration data
Date: Fri, 10 Apr 2020 12:32:48 +0800 [thread overview]
Message-ID: <20200410043248.114384-5-jitao.shi@mediatek.com> (raw)
In-Reply-To: <20200410043248.114384-1-jitao.shi@mediatek.com>
Read calibration data from nvmem, and config mipitx impedance with
calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 40 +++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 3 ++
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 21 ++++++++++
3 files changed, 64 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index e301af64809e..5e91fc2c1318 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -88,6 +88,44 @@ static const struct phy_ops mtk_mipi_tx_ops = {
.owner = THIS_MODULE,
};
+static void mtk_mipi_tx_get_calibration_datal(struct mtk_mipi_tx *mipi_tx)
+{
+ struct nvmem_cell *cell;
+ size_t len;
+ u32 *buf;
+
+ memset(mipi_tx->rt_code, 0, sizeof(mipi_tx->rt_code));
+ cell = nvmem_cell_get(mipi_tx->dev, "calibration-data");
+ if (IS_ERR(cell)) {
+ dev_info(mipi_tx->dev, "can't get nvmem_cell_get, ignore it\n");
+ } else {
+ buf = (u32 *)nvmem_cell_read(cell, &len);
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf)) {
+ dev_info(mipi_tx->dev, "can't get data, ignore it\n");
+ } else {
+ if (len < 3 * sizeof(u32)) {
+ dev_info(mipi_tx->dev, "invalid calibration data\n");
+ kfree(buf);
+ return;
+ }
+
+ mipi_tx->rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) |
+ (buf[0] >> 11 & 0x1f);
+ mipi_tx->rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) |
+ (buf[0] >> 1 & 0x1f);
+ mipi_tx->rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) |
+ (buf[1] >> 22 & 0x1f);
+ mipi_tx->rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) |
+ (buf[1] >> 12 & 0x1f);
+ mipi_tx->rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) |
+ (buf[1] >> 2 & 0x1f);
+ kfree(buf);
+ }
+ }
+}
+
static int mtk_mipi_tx_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -174,6 +212,8 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
mipi_tx->dev = dev;
+ mtk_mipi_tx_get_calibration_datal(mipi_tx);
+
return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
mipi_tx->pll);
}
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
index eea44327fe9f..c76f07c3fdeb 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
@@ -12,9 +12,11 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
+#include <linux/slab.h>
struct mtk_mipitx_data {
const u32 mppll_preserve;
@@ -28,6 +30,7 @@ struct mtk_mipi_tx {
void __iomem *regs;
u32 data_rate;
u32 mipitx_drive;
+ u32 rt_code[5];
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index e4cc967750cb..9f3e55aeebb2 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -28,6 +28,7 @@
#define MIPITX_PLL_CON4 0x003c
#define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100
#define MIPITX_D2_SW_CTL_EN 0x0144
#define MIPITX_D0_SW_CTL_EN 0x0244
#define MIPITX_CK_CKMODE_EN 0x0328
@@ -108,6 +109,24 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
};
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
+{
+ int i, j;
+
+ for (i = 0; i < 5; i++) {
+ if ((mipi_tx->rt_code[i] & 0x1f) == 0)
+ mipi_tx->rt_code[i] |= 0x10;
+
+ if ((mipi_tx->rt_code[i] >> 5 & 0x1f) == 0)
+ mipi_tx->rt_code[i] |= 0x10 << 5;
+
+ for (j = 0; j < 10; j++)
+ mtk_mipi_tx_update_bits(mipi_tx,
+ MIPITX_D2P_RTCODE * (i + 1) + j * 4,
+ 1, mipi_tx->rt_code[i] >> j & 1);
+ }
+}
+
static void mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
@@ -130,6 +149,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
RG_DSI_HSTX_LDO_REF_SEL,
(mipi_tx->mipitx_drive - 3000) / 200 << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
next prev parent reply other threads:[~2020-04-10 4:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-10 4:32 [PATCH v5 0/4] Config mipi tx current and impedance Jitao Shi
2020-04-10 4:32 ` [PATCH v5 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Jitao Shi
2020-04-10 4:32 ` [PATCH v5 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Jitao Shi
2020-04-10 4:32 ` [PATCH v5 3/4] drm/mediatek: add the mipitx driving control Jitao Shi
2020-04-10 4:32 ` Jitao Shi [this message]
2020-04-10 16:12 ` [PATCH v5 4/4] drm/mediatek: config mipitx impedance with calibration data Chun-Kuang Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200410043248.114384-5-jitao.shi@mediatek.com \
--to=jitao.shi@mediatek.com \
--cc=airlied@linux.ie \
--cc=bibby.hsieh@mediatek.com \
--cc=cawa.cheng@mediatek.com \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eddie.huang@mediatek.com \
--cc=huijuan.xie@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=stonea168@163.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).