From: Jitao Shi <jitao.shi@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Cc: <linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <yingjoe.chen@mediatek.com>,
<eddie.huang@mediatek.com>, <cawa.cheng@mediatek.com>,
<bibby.hsieh@mediatek.com>, <ck.hu@mediatek.com>,
<stonea168@163.com>, <huijuan.xie@mediatek.com>,
Jitao Shi <jitao.shi@mediatek.com>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>
Subject: [PATCH v6 3/4] drm/mediatek: add the mipitx driving control
Date: Sat, 11 Apr 2020 15:44:07 +0800 [thread overview]
Message-ID: <20200411074408.38090-4-jitao.shi@mediatek.com> (raw)
In-Reply-To: <20200411074408.38090-1-jitao.shi@mediatek.com>
Add a property in device tree to control the driving by different
board.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
3 files changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index e4d34484ecc8..e301af64809e 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return ret;
}
+ ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
+ &mipi_tx->mipitx_drive);
+ /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
+ if (ret < 0)
+ mipi_tx->mipitx_drive = 4600;
+
+ /* check the mipitx_drive valid */
+ if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
+ dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
+ mipi_tx->mipitx_drive);
+ mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
+ 6000);
+ }
+
ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names",
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
index 413f35d86219..eea44327fe9f 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
@@ -27,6 +27,7 @@ struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
u32 data_rate;
+ u32 mipitx_drive;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index 91f08a351fd0..e4cc967750cb 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -17,6 +17,9 @@
#define RG_DSI_BG_CORE_EN BIT(7)
#define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010
+#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
+
#define MIPITX_PLL_PWR 0x0028
#define MIPITX_PLL_CON0 0x002c
#define MIPITX_PLL_CON1 0x0030
@@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
+ RG_DSI_HSTX_LDO_REF_SEL,
+ (mipi_tx->mipitx_drive - 3000) / 200 << 6);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
next prev parent reply other threads:[~2020-04-11 7:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-11 7:44 [PATCH v6 0/4] Config mipi tx current and impedance Jitao Shi
2020-04-11 7:44 ` [PATCH v6 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Jitao Shi
2020-04-19 1:32 ` Chun-Kuang Hu
2020-04-20 18:46 ` Rob Herring
2020-04-11 7:44 ` [PATCH v6 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Jitao Shi
2020-04-11 7:44 ` Jitao Shi [this message]
2020-04-11 7:44 ` [PATCH v6 4/4] drm/mediatek: config mipitx impedance with calibration data Jitao Shi
2020-04-11 9:29 ` Chun-Kuang Hu
2020-04-21 23:31 ` [PATCH v6 0/4] Config mipi tx current and impedance Chun-Kuang Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200411074408.38090-4-jitao.shi@mediatek.com \
--to=jitao.shi@mediatek.com \
--cc=airlied@linux.ie \
--cc=bibby.hsieh@mediatek.com \
--cc=cawa.cheng@mediatek.com \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eddie.huang@mediatek.com \
--cc=huijuan.xie@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=stonea168@163.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).