[PATCH 4.19 30/54] net: dsa: bcm_sf2: Ensure correct sub-node is parsed

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit afa3b592953bfaecfb4f2f335ec5f935cff56804 ]

When the bcm_sf2 was converted into a proper platform device driver and
used the new dsa_register_switch() interface, we would still be parsing
the legacy DSA node that contained all the port information since the
platform firmware has intentionally maintained backward and forward
compatibility to client programs. Ensure that we do parse the correct
node, which is "ports" per the revised DSA binding.

Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/bcm_sf2.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1014,6 +1014,7 @@ static int bcm_sf2_sw_probe(struct platf
 	const struct bcm_sf2_of_data *data;
 	struct b53_platform_data *pdata;
 	struct dsa_switch_ops *ops;
+	struct device_node *ports;
 	struct bcm_sf2_priv *priv;
 	struct b53_device *dev;
 	struct dsa_switch *ds;
@@ -1077,7 +1078,11 @@ static int bcm_sf2_sw_probe(struct platf
 	set_bit(0, priv->cfp.used);
 	set_bit(0, priv->cfp.unique);
 
-	bcm_sf2_identify_ports(priv, dn->child);
+	ports = of_find_node_by_name(dn, "ports");
+	if (ports) {
+		bcm_sf2_identify_ports(priv, ports);
+		of_node_put(ports);
+	}
 
 	priv->irq0 = irq_of_parse_and_map(dn, 0);
 	priv->irq1 = irq_of_parse_and_map(dn, 1);