linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiri Olsa <jolsa@redhat.com>
To: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>,
	"Naveen N. Rao" <naveen.n.rao@linux.ibm.com>,
	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
	"David S. Miller" <davem@davemloft.net>,
	Peter Zijlstra <peterz@infradead.org>,
	lkml <linux-kernel@vger.kernel.org>,
	"bibo,mao" <bibo.mao@intel.com>,
	"Ziqian SUN (Zamir)" <zsun@redhat.com>,
	stable@vger.kernel.org
Subject: [PATCHv2] kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
Date: Thu, 16 Apr 2020 16:31:04 +0200	[thread overview]
Message-ID: <20200416143104.GA400699@krava> (raw)
In-Reply-To: <20200416224250.7a53fb581e50aa32df75a0cf@kernel.org>

Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:

 ============================================
 WARNING: possible recursive locking detected
 5.6.0-rc6+ #6 Not tainted
 --------------------------------------------
 sched-messaging/2767 is trying to acquire lock:
 ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0

 but task is already holding lock:
 ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(kretprobe_table_locks[i].lock));
   lock(&(kretprobe_table_locks[i].lock));

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by sched-messaging/2767:
  #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 stack backtrace:
 CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
 Call Trace:
  dump_stack+0x96/0xe0
  __lock_acquire.cold.57+0x173/0x2b7
  ? native_queued_spin_lock_slowpath+0x42b/0x9e0
  ? lockdep_hardirqs_on+0x590/0x590
  ? __lock_acquire+0xf63/0x4030
  lock_acquire+0x15a/0x3d0
  ? kretprobe_hash_lock+0x52/0xa0
  _raw_spin_lock_irqsave+0x36/0x70
  ? kretprobe_hash_lock+0x52/0xa0
  kretprobe_hash_lock+0x52/0xa0
  trampoline_handler+0xf8/0x940
  ? kprobe_fault_handler+0x380/0x380
  ? find_held_lock+0x3a/0x1c0
  kretprobe_trampoline+0x25/0x50
  ? lock_acquired+0x392/0xbc0
  ? _raw_spin_lock_irqsave+0x50/0x70
  ? __get_valid_kprobe+0x1f0/0x1f0
  ? _raw_spin_unlock_irqrestore+0x3b/0x40
  ? finish_task_switch+0x4b9/0x6d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70

The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.

The problem is in outside kprobe_flush_task, where we call:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave

where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.

The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed

        ---> kretprobe_table_locks locked

        kretprobe_trampoline
          trampoline_handler
            kretprobe_hash_lock(current, &head, &flags);  <--- deadlock

Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.

Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.

Fixes: ef53d9c5e4da ('kprobes: improve kretprobe scalability with hashed locking')
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
 arch/x86/kernel/kprobes/core.c | 16 +++-------------
 include/linux/kprobes.h        |  4 ++++
 kernel/kprobes.c               | 24 ++++++++++++++++++++++++
 3 files changed, 31 insertions(+), 13 deletions(-)

v2 changes: updated changelog with Fixes/Ack and Cc stable

diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 4d7022a740ab..a12adbe1559d 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -753,16 +753,11 @@ asm(
 NOKPROBE_SYMBOL(kretprobe_trampoline);
 STACK_FRAME_NON_STANDARD(kretprobe_trampoline);
 
-static struct kprobe kretprobe_kprobe = {
-	.addr = (void *)kretprobe_trampoline,
-};
-
 /*
  * Called from kretprobe_trampoline
  */
 __used __visible void *trampoline_handler(struct pt_regs *regs)
 {
-	struct kprobe_ctlblk *kcb;
 	struct kretprobe_instance *ri = NULL;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *tmp;
@@ -772,16 +767,12 @@ __used __visible void *trampoline_handler(struct pt_regs *regs)
 	void *frame_pointer;
 	bool skipped = false;
 
-	preempt_disable();
-
 	/*
 	 * Set a dummy kprobe for avoiding kretprobe recursion.
 	 * Since kretprobe never run in kprobe handler, kprobe must not
 	 * be running at this point.
 	 */
-	kcb = get_kprobe_ctlblk();
-	__this_cpu_write(current_kprobe, &kretprobe_kprobe);
-	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+	kprobe_busy_begin();
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -857,7 +848,7 @@ __used __visible void *trampoline_handler(struct pt_regs *regs)
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
-			__this_cpu_write(current_kprobe, &kretprobe_kprobe);
+			__this_cpu_write(current_kprobe, &kprobe_busy);
 		}
 
 		recycle_rp_inst(ri, &empty_rp);
@@ -873,8 +864,7 @@ __used __visible void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_hash_unlock(current, &flags);
 
-	__this_cpu_write(current_kprobe, NULL);
-	preempt_enable();
+	kprobe_busy_end();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 04bdaf01112c..645fd401c856 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -350,6 +350,10 @@ static inline struct kprobe_ctlblk *get_kprobe_ctlblk(void)
 	return this_cpu_ptr(&kprobe_ctlblk);
 }
 
+extern struct kprobe kprobe_busy;
+void kprobe_busy_begin(void);
+void kprobe_busy_end(void);
+
 kprobe_opcode_t *kprobe_lookup_name(const char *name, unsigned int offset);
 int register_kprobe(struct kprobe *p);
 void unregister_kprobe(struct kprobe *p);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 2625c241ac00..75bb4a8458e7 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1236,6 +1236,26 @@ __releases(hlist_lock)
 }
 NOKPROBE_SYMBOL(kretprobe_table_unlock);
 
+struct kprobe kprobe_busy = {
+	.addr = (void *) get_kprobe,
+};
+
+void kprobe_busy_begin(void)
+{
+	struct kprobe_ctlblk *kcb;
+
+	preempt_disable();
+	__this_cpu_write(current_kprobe, &kprobe_busy);
+	kcb = get_kprobe_ctlblk();
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+}
+
+void kprobe_busy_end(void)
+{
+	__this_cpu_write(current_kprobe, NULL);
+	preempt_enable();
+}
+
 /*
  * This function is called from finish_task_switch when task tk becomes dead,
  * so that we can recycle any function-return probe instances associated
@@ -1253,6 +1273,8 @@ void kprobe_flush_task(struct task_struct *tk)
 		/* Early boot.  kretprobe_table_locks not yet initialized. */
 		return;
 
+	kprobe_busy_begin();
+
 	INIT_HLIST_HEAD(&empty_rp);
 	hash = hash_ptr(tk, KPROBE_HASH_BITS);
 	head = &kretprobe_inst_table[hash];
@@ -1266,6 +1288,8 @@ void kprobe_flush_task(struct task_struct *tk)
 		hlist_del(&ri->hlist);
 		kfree(ri);
 	}
+
+	kprobe_busy_end();
 }
 NOKPROBE_SYMBOL(kprobe_flush_task);
 
-- 
2.18.2


  reply	other threads:[~2020-04-16 14:34 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-08 16:46 [RFC] kretprobe: Prevent triggering kretprobe from within kprobe_flush_task Jiri Olsa
2020-04-09  9:02 ` Naveen N. Rao
2020-04-09 18:43   ` Jiri Olsa
2020-04-09 12:38 ` Masami Hiramatsu
2020-04-09 12:52   ` Jiri Olsa
2020-04-09 14:16     ` Masami Hiramatsu
2020-04-09 13:16   ` Naveen N. Rao
2020-04-09 14:26     ` Masami Hiramatsu
2020-04-09 14:41 ` Masami Hiramatsu
2020-04-09 18:44   ` Jiri Olsa
2020-04-09 20:13     ` Jiri Olsa
2020-04-10  0:31       ` Masami Hiramatsu
2020-04-14 16:03         ` Jiri Olsa
2020-04-15  9:05           ` [PATCH] " Jiri Olsa
2020-04-16  1:55             ` Masami Hiramatsu
2020-04-16  9:13               ` Jiri Olsa
2020-04-16 13:42                 ` Masami Hiramatsu
2020-04-16 14:31                   ` Jiri Olsa [this message]
2020-04-17  7:38                     ` [PATCHv2] " Masami Hiramatsu
2020-04-28 21:36                       ` Jiri Olsa
2020-05-01  2:01                         ` Masami Hiramatsu
2020-05-07 10:15                           ` Jiri Olsa
2020-04-10  1:31       ` [RFC] " Ziqian SUN (Zamir)
2020-04-14 16:03         ` Jiri Olsa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200416143104.GA400699@krava \
    --to=jolsa@redhat.com \
    --cc=anil.s.keshavamurthy@intel.com \
    --cc=bibo.mao@intel.com \
    --cc=davem@davemloft.net \
    --cc=jolsa@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mhiramat@kernel.org \
    --cc=naveen.n.rao@linux.ibm.com \
    --cc=peterz@infradead.org \
    --cc=stable@vger.kernel.org \
    --cc=zsun@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).