From: Michael Walle <michael@walle.cc>
To: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Michael Walle <michael@walle.cc>
Subject: [PATCH net-next v2 1/3] net: phy: broadcom: add helper to write/read RDB registers
Date: Sun, 19 Apr 2020 12:12:47 +0200 [thread overview]
Message-ID: <20200419101249.28991-1-michael@walle.cc> (raw)
RDB (Register Data Base) registers are used on newer Broadcom PHYs. Add
helper to read, write and modify these registers.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
changes since v1:
- corrected typo
- added Reviewed-by
drivers/net/phy/bcm-phy-lib.c | 80 +++++++++++++++++++++++++++++++++++
drivers/net/phy/bcm-phy-lib.h | 9 ++++
include/linux/brcmphy.h | 3 ++
3 files changed, 92 insertions(+)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index e77b274a09fd..d5f9a2701989 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -155,6 +155,86 @@ int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
}
EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+ int val;
+
+ val = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ if (val < 0)
+ return val;
+
+ return __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_read_rdb);
+
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_read_rdb(phydev, rdb);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_rdb);
+
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+ int ret;
+
+ ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ if (ret < 0)
+ return ret;
+
+ return __phy_write(phydev, MII_BCM54XX_RDB_DATA, val);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_write_rdb);
+
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_write_rdb(phydev, rdb, val);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_rdb);
+
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+ int new, ret;
+
+ ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
+ if (ret < 0)
+ return ret;
+
+ ret = __phy_read(phydev, MII_BCM54XX_RDB_DATA);
+ if (ret < 0)
+ return ret;
+
+ new = (ret & ~mask) | set;
+ if (new == ret)
+ return 0;
+
+ return __phy_write(phydev, MII_BCM54XX_RDB_DATA, new);
+}
+EXPORT_SYMBOL_GPL(__bcm_phy_modify_rdb);
+
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
+{
+ int ret;
+
+ phy_lock_mdio_bus(phydev);
+ ret = __bcm_phy_modify_rdb(phydev, rdb, mask, set);
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_modify_rdb);
+
int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
{
int val;
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 129df819be8c..4d3de91cda6c 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -48,6 +48,15 @@ int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
u16 val);
int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
+int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val);
+int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb);
+int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+ u16 set);
+int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask,
+ u16 set);
+
int bcm_phy_ack_intr(struct phy_device *phydev);
int bcm_phy_config_intr(struct phy_device *phydev);
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 6462c5447872..e14f78b3c8a4 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -114,6 +114,9 @@
#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
+#define MII_BCM54XX_RDB_ADDR 0x1e
+#define MII_BCM54XX_RDB_DATA 0x1f
+
/*
* AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18)
*/
--
2.20.1
next reply other threads:[~2020-04-19 10:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-19 10:12 Michael Walle [this message]
2020-04-19 10:12 ` [PATCH net-next v2 2/3] net: phy: add Broadcom BCM54140 support Michael Walle
2020-04-19 15:49 ` Andrew Lunn
2020-04-19 16:33 ` Michael Walle
2020-04-19 16:49 ` Andrew Lunn
2020-04-19 16:56 ` Michael Walle
2020-04-19 10:12 ` [PATCH net-next v2 3/3] net: phy: bcm54140: add hwmon support Michael Walle
2020-04-19 15:56 ` Andrew Lunn
2020-04-19 16:51 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200419101249.28991-1-michael@walle.cc \
--to=michael@walle.cc \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).