[Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Kamal Dasu]

From: Florian Fainelli <f.fainelli@gmail.com>

The clock provider may not be ready by the time spi-bcm-qspi gets
probed, handle probe deferral using devm_clk_get_optional().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 23d295f36c80..74f4579c3f6a 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1222,6 +1222,11 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi = spi_master_get_devdata(master);
+
+	qspi->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(qspi->clk))
+		return PTR_ERR(qspi->clk);
+
 	qspi->pdev = pdev;
 	qspi->trans_pos.trans = NULL;
 	qspi->trans_pos.byte = 0;
@@ -1335,13 +1340,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 		qspi->soc_intc = NULL;
 	}
 
-	qspi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(qspi->clk)) {
-		dev_warn(dev, "unable to get clock\n");
-		ret = PTR_ERR(qspi->clk);
-		goto qspi_probe_err;
-	}
-
 	ret = clk_prepare_enable(qspi->clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
-- 
2.17.1

[Patch v3 2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs

[Kamal Dasu]

Added documentation for compatibility for brcmstb SoCs :
7425, 7429, 7435, 7216, 7278

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 .../devicetree/bindings/spi/brcm,spi-bcm-qspi.txt      | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
index ad7ac80a3841..f5e518d099f2 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
@@ -26,6 +26,16 @@ Required properties:
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
 						   BRCMSTB  SoCs
+    "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
     "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
 
-- 
2.17.1

[Patch v3 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset

[Kamal Dasu]

From: Florian Fainelli <f.fainelli@gmail.com>

Older MIPS chips have a QSPI/MSPI controller that does not have the
MSPI_REV offset, reading from that offset will cause a bus error. Match
their compatible string and do not perform a read from that register in
that case.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 50 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 74f4579c3f6a..d901dcb10d06 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -91,6 +91,7 @@
 #define MSPI_MSPI_STATUS			0x020
 #define MSPI_CPTQP				0x024
 #define MSPI_SPCR3				0x028
+#define MSPI_REV				0x02c
 #define MSPI_TXRAM				0x040
 #define MSPI_RXRAM				0x0c0
 #define MSPI_CDRAM				0x140
@@ -217,6 +218,8 @@ struct bcm_qspi {
 	struct bcm_qspi_dev_id *dev_ids;
 	struct completion mspi_done;
 	struct completion bspi_done;
+	u8 mspi_maj_rev;
+	u8 mspi_min_rev;
 };
 
 static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -1190,8 +1193,35 @@ static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
 	.exec_op = bcm_qspi_exec_mem_op,
 };
 
+struct bcm_qspi_data {
+	bool	has_mspi_rev;
+};
+
+static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
+	.has_mspi_rev	= false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_rev_data = {
+	.has_mspi_rev	= true,
+};
+
 static const struct of_device_id bcm_qspi_of_match[] = {
-	{ .compatible = "brcm,spi-bcm-qspi" },
+	{
+		.compatible = "brcm,spi-bcm7425-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7429-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7435-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm-qspi",
+		.data = &bcm_qspi_rev_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1199,12 +1229,15 @@ MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
 int bcm_qspi_probe(struct platform_device *pdev,
 		   struct bcm_qspi_soc_intc *soc_intc)
 {
+	const struct of_device_id *of_id = NULL;
+	const struct bcm_qspi_data *data;
 	struct device *dev = &pdev->dev;
 	struct bcm_qspi *qspi;
 	struct spi_master *master;
 	struct resource *res;
 	int irq, ret = 0, num_ints = 0;
 	u32 val;
+	u32 rev = 0;
 	const char *name = NULL;
 	int num_irqs = ARRAY_SIZE(qspi_irq_tab);
 
@@ -1212,9 +1245,12 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	if (!dev->of_node)
 		return -ENODEV;
 
-	if (!of_match_node(bcm_qspi_of_match, dev->of_node))
+	of_id = of_match_node(bcm_qspi_of_match, dev->of_node);
+	if (!of_id)
 		return -ENODEV;
 
+	data = of_id->data;
+
 	master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
 	if (!master) {
 		dev_err(dev, "error allocating spi_master\n");
@@ -1349,6 +1385,16 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->base_clk = clk_get_rate(qspi->clk);
 	qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
 
+	if (data->has_mspi_rev) {
+		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+		/* some older revs do not have a MSPI_REV register */
+		if ((rev & 0xff) == 0xff)
+			rev = 0;
+	}
+
+	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+	qspi->mspi_min_rev = rev & 0xf;
+
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
 	init_completion(&qspi->bspi_done);
-- 
2.17.1

[Patch v3 4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change

[Kamal Dasu]

As per the spi core implementation for MSPI devices when the transfer is
the last one in the message, the chip may stay selected until the next
transfer. On multi-device SPI busses with nothing blocking messages going
to other devices, this is just a performance hint; starting a message to
another device deselects this one. But in other cases, this can be used
to ensure correctness. Some devices need protocol transactions to be built
from a series of spi_message submissions, where the content of one message
is determined by the results of previous messages and where the whole
transaction ends when the chipselect goes intactive.

On CS change after completing the last serial transfer, the MSPI driver
drives SSb pin CDRAM register correctly according comments in core spi.h
as shown below:

case 1) EOM =1, cs_change =0: SSb inactive
case 2) EOM =1, cs_change =1: SSb active
case 3) EOM =0, cs_change =0: SSb active
case 4) EOM =0, cs_change =1: SSb inactive

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index d901dcb10d06..c48c399dce53 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -615,19 +615,15 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 		if (qt->trans->cs_change &&
 		    (flags & TRANS_STATUS_BREAK_CS_CHANGE))
 			ret |= TRANS_STATUS_BREAK_CS_CHANGE;
-		if (ret)
-			goto done;
 
-		dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
 		if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
-			ret = TRANS_STATUS_BREAK_EOM;
+			ret |= TRANS_STATUS_BREAK_EOM;
 		else
-			ret = TRANS_STATUS_BREAK_NO_BYTES;
+			ret |= TRANS_STATUS_BREAK_NO_BYTES;
 
 		qt->trans = NULL;
 	}
 
-done:
 	dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
 		qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
 	return ret;
@@ -774,7 +770,16 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
 	bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
 
-	if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
+	/*
+	 *  case 1) EOM =1, cs_change =0: SSb inactive
+	 *  case 2) EOM =1, cs_change =1: SSb stay active
+	 *  case 3) EOM =0, cs_change =0: SSb stay active
+	 *  case 4) EOM =0, cs_change =1: SSb inactive
+	 */
+	if (((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_CS_CHANGE) ||
+	    ((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_EOM)) {
 		mspi_cdram = read_cdram_slot(qspi, slot - 1) &
 			~MSPI_CDRAM_CONT_BIT;
 		write_cdram_slot(qspi, slot - 1, mspi_cdram);
-- 
2.17.1

[Patch v3 5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0

[Kamal Dasu]

From: Justin Chen <justinpopo6@gmail.com>

Currently we set the tx/rx buffer to 0xff when NULL. This causes
problems with some spi slaves where 0xff is a valid command. Looking
at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index c48c399dce53..e00208801c8b 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -669,7 +669,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 			if (buf)
 				buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
 			dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-				buf ? buf[tp.byte] : 0xff);
+				buf ? buf[tp.byte] : 0x0);
 		} else {
 			u16 *buf = tp.trans->rx_buf;
 
@@ -677,7 +677,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 				buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
 								      slot);
 			dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-				buf ? buf[tp.byte] : 0xffff);
+				buf ? buf[tp.byte / 2] : 0x0);
 		}
 
 		update_qspi_trans_byte_count(qspi, &tp,
@@ -732,13 +732,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	while (!tstatus && slot < MSPI_NUM_CDRAM) {
 		if (tp.trans->bits_per_word <= 8) {
 			const u8 *buf = tp.trans->tx_buf;
-			u8 val = buf ? buf[tp.byte] : 0xff;
+			u8 val = buf ? buf[tp.byte] : 0x00;
 
 			write_txram_slot_u8(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
 		} else {
 			const u16 *buf = tp.trans->tx_buf;
-			u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+			u16 val = buf ? buf[tp.byte / 2] : 0x0000;
 
 			write_txram_slot_u16(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
-- 
2.17.1

[Patch v3 6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management

[Kamal Dasu]

SCMI only passes clk_prepare_enable() and clk_disable_unprepare(), made
changes to suspend/resume ops to use the appropriate calls so that PM
works for ARM and ARM64 platforms.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index e00208801c8b..a3936ae5a860 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1455,7 +1455,7 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
 			bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
 
 	spi_master_suspend(qspi->master);
-	clk_disable(qspi->clk);
+	clk_disable_unprepare(qspi->clk);
 	bcm_qspi_hw_uninit(qspi);
 
 	return 0;
@@ -1473,7 +1473,7 @@ static int __maybe_unused bcm_qspi_resume(struct device *dev)
 		qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
 						 true);
 
-	ret = clk_enable(qspi->clk);
+	ret = clk_prepare_enable(qspi->clk);
 	if (!ret)
 		spi_master_resume(qspi->master);
 
-- 
2.17.1

[Patch v3 7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds

[Kamal Dasu]

Setting MSPI_SPCR3.fastbr=1 allows using clock divider (SPBR) values of
1-7, while the default value prohibits these values and requires a minimum
clock divider value of 8.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 36 +++++++++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index a3936ae5a860..edc601dbf221 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -107,13 +107,15 @@
 #define MSPI_SPCR2_SPE				BIT(6)
 #define MSPI_SPCR2_CONT_AFTER_CMD		BIT(7)
 
+#define MSPI_SPCR3_FASTBR			BIT(0)
+#define MSPI_SPCR3_FASTDT			BIT(1)
+
 #define MSPI_MSPI_STATUS_SPIF			BIT(0)
 
 #define INTR_BASE_BIT_SHIFT			0x02
 #define INTR_COUNT				0x07
 
 #define NUM_CHIPSELECT				4
-#define QSPI_SPBR_MIN				8U
 #define QSPI_SPBR_MAX				255U
 
 #define OPCODE_DIOR				0xBB
@@ -227,6 +229,25 @@ static inline bool has_bspi(struct bcm_qspi *qspi)
 	return qspi->bspi_mode;
 }
 
+/* hardware supports spcr3 and fast baud-rate  */
+static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) &&
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 5)))
+		return true;
+
+	return false;
+}
+
+static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
+{
+	if (bcm_qspi_has_fastbr(qspi))
+		return 1;
+	else
+		return 8;
+}
+
 /* Read qspi controller register*/
 static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
 				unsigned int offset)
@@ -534,7 +555,7 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	if (xp->speed_hz)
 		spbr = qspi->base_clk / (2 * xp->speed_hz);
 
-	spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
+	spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
 
 	spcr = MSPI_MASTER_BIT;
@@ -544,6 +565,14 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	spcr |= xp->mode & 3;
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
 
+	if (bcm_qspi_has_fastbr(qspi)) {
+		spcr = 0;
+
+		/* enable fastbr */
+		spcr |=	MSPI_SPCR3_FASTBR;
+		bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
+	}
+
 	qspi->last_parms = *xp;
 }
 
@@ -1388,7 +1417,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi->base_clk = clk_get_rate(qspi->clk);
-	qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
 
 	if (data->has_mspi_rev) {
 		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
@@ -1400,6 +1428,8 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
 	qspi->mspi_min_rev = rev & 0xf;
 
+	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
+
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
 	init_completion(&qspi->bspi_done);
-- 
2.17.1

[Patch v3 8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz

[Kamal Dasu]

Adding support for MSPI sys clk 108Mhz available on 7216
and 7278 BRCMSTB SoCs.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 44 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index edc601dbf221..99f2cfcbb50c 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -109,6 +109,11 @@
 
 #define MSPI_SPCR3_FASTBR			BIT(0)
 #define MSPI_SPCR3_FASTDT			BIT(1)
+#define MSPI_SPCR3_SYSCLKSEL_MASK		GENMASK(11, 10)
+#define MSPI_SPCR3_SYSCLKSEL_27			(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 ~(BIT(10) | BIT(11)))
+#define MSPI_SPCR3_SYSCLKSEL_108		(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 BIT(11))
 
 #define MSPI_MSPI_STATUS_SPIF			BIT(0)
 
@@ -117,6 +122,7 @@
 
 #define NUM_CHIPSELECT				4
 #define QSPI_SPBR_MAX				255U
+#define MSPI_BASE_FREQ				27000000UL
 
 #define OPCODE_DIOR				0xBB
 #define OPCODE_QIOR				0xEB
@@ -222,6 +228,7 @@ struct bcm_qspi {
 	struct completion bspi_done;
 	u8 mspi_maj_rev;
 	u8 mspi_min_rev;
+	bool mspi_spcr3_sysclk;
 };
 
 static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -240,6 +247,17 @@ static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
 	return false;
 }
 
+/* hardware supports sys clk 108Mhz  */
+static inline bool bcm_qspi_has_sysclk_108(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) && (qspi->mspi_spcr3_sysclk ||
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 6))))
+		return true;
+
+	return false;
+}
+
 static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
 {
 	if (bcm_qspi_has_fastbr(qspi))
@@ -570,6 +588,15 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 
 		/* enable fastbr */
 		spcr |=	MSPI_SPCR3_FASTBR;
+
+		if (bcm_qspi_has_sysclk_108(qspi)) {
+			/* SYSCLK_108 */
+			spcr |= MSPI_SPCR3_SYSCLKSEL_108;
+			qspi->base_clk = MSPI_BASE_FREQ * 4;
+			/* Change spbr as we changed sysclk */
+			bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, 4);
+		}
+
 		bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
 	}
 
@@ -1229,14 +1256,22 @@ static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
 
 struct bcm_qspi_data {
 	bool	has_mspi_rev;
+	bool	has_spcr3_sysclk;
 };
 
 static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
 	.has_mspi_rev	= false,
+	.has_spcr3_sysclk = false,
 };
 
 static const struct bcm_qspi_data bcm_qspi_rev_data = {
 	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_spcr3_data = {
+	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = true,
 };
 
 static const struct of_device_id bcm_qspi_of_match[] = {
@@ -1256,6 +1291,14 @@ static const struct of_device_id bcm_qspi_of_match[] = {
 		.compatible = "brcm,spi-bcm-qspi",
 		.data = &bcm_qspi_rev_data,
 	},
+	{
+		.compatible = "brcm,spi-bcm7216-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7278-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1427,6 +1470,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
 
 	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
 	qspi->mspi_min_rev = rev & 0xf;
+	qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
 
 	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
 
-- 
2.17.1

[Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers

[Kamal Dasu]

Set MASTER bit on the MSPI_SPCR0_MSB only for legacy MSPI and HIF_MSPI
controllers.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 99f2cfcbb50c..681d09085175 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -576,11 +576,17 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
 
-	spcr = MSPI_MASTER_BIT;
+	if (!qspi->mspi_maj_rev)
+		/* legacy controller */
+		spcr = MSPI_MASTER_BIT;
+	else
+		spcr = 0;
+
 	/* for 16 bit the data should be zero */
 	if (xp->bits_per_word != 16)
 		spcr |= xp->bits_per_word << 2;
 	spcr |= xp->mode & 3;
+
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
 
 	if (bcm_qspi_has_fastbr(qspi)) {
-- 
2.17.1

Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 422 bytes --]

On Mon, Apr 20, 2020 at 03:08:53PM -0400, Kamal Dasu wrote:
> Set MASTER bit on the MSPI_SPCR0_MSB only for legacy MSPI and HIF_MSPI
> controllers.
> 
> Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>

If this is a fix it should have been near the start of the series before
any new features to make sure that it can be applied cleanly as a fix.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers

[Kamal Dasu]

On Tue, Apr 21, 2020 at 8:50 AM Mark Brown <broonie@kernel.org> wrote:
>
> On Mon, Apr 20, 2020 at 03:08:53PM -0400, Kamal Dasu wrote:
> > Set MASTER bit on the MSPI_SPCR0_MSB only for legacy MSPI and HIF_MSPI
> > controllers.
> >
> > Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
> > Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
>
> If this is a fix it should have been near the start of the series before
> any new features to make sure that it can be applied cleanly as a fix.

Yes it could can be after [Patch v3 3/9] spi: bcm-qspi: Handle lack of
MSPI_REV offset

Kamal

Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 443 bytes --]

On Tue, Apr 21, 2020 at 10:53:57AM -0400, Kamal Dasu wrote:
> On Tue, Apr 21, 2020 at 8:50 AM Mark Brown <broonie@kernel.org> wrote:

> > If this is a fix it should have been near the start of the series before
> > any new features to make sure that it can be applied cleanly as a fix.

> Yes it could can be after [Patch v3 3/9] spi: bcm-qspi: Handle lack of
> MSPI_REV offset

That's not a fix though, that's adding support for new devices?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Mark Brown]

On Mon, 20 Apr 2020 15:08:45 -0400, Kamal Dasu wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
> 
> The clock provider may not be ready by the time spi-bcm-qspi gets
> probed, handle probe deferral using devm_clk_get_optional().
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7

Thanks!

[1/9] spi: bcm-qspi: Handle clock probe deferral
      commit: 0392727c261bab65a35cd4f82ee9459bc237591d
[2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs
      (not applied)
[3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
      (not applied)
[4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change
      commit: 742d5958062488d03082a9ff01a6afb3cf7bd634
[5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
      commit: 4df3bea7f9d2ddd9ac2c29ba945c7c4db2def29c
[6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management
      commit: 1b7ad8c405c3dc0ad6c2dc61fe21fe7a446cceeb
[7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds
      (not applied)
[8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz
      (not applied)
[9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
      (not applied)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Florian Fainelli]

On 4/21/2020 8:06 AM, Mark Brown wrote:
> On Mon, 20 Apr 2020 15:08:45 -0400, Kamal Dasu wrote:
>> From: Florian Fainelli <f.fainelli@gmail.com>
>>
>> The clock provider may not be ready by the time spi-bcm-qspi gets
>> probed, handle probe deferral using devm_clk_get_optional().
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
>>
>> [...]
> 
> Applied to
> 
>     https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7

It would be nice if the URL could be clickable, e.g.:

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-5.7

> 
> Thanks!
> 
> [1/9] spi: bcm-qspi: Handle clock probe deferral
>        commit: 0392727c261bab65a35cd4f82ee9459bc237591d
> [2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs
>        (not applied)
> [3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
>        (not applied)
> [4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change
>        commit: 742d5958062488d03082a9ff01a6afb3cf7bd634
> [5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
>        commit: 4df3bea7f9d2ddd9ac2c29ba945c7c4db2def29c
> [6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management
>        commit: 1b7ad8c405c3dc0ad6c2dc61fe21fe7a446cceeb
> [7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds
>        (not applied)
> [8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz
>        (not applied)
> [9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
>        (not applied)
> 
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
> 
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
> 
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
> 
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
> 
> Thanks,
> Mark
> 

-- 
Florian

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 387 bytes --]

On Tue, Apr 21, 2020 at 10:11:52AM -0700, Florian Fainelli wrote:

> > Applied to

> >     https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7

> It would be nice if the URL could be clickable, e.g.:

> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-5.7

That then doesn't work with git itself unfortunately, someone's got to
loose out :/

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Florian Fainelli]

On 4/21/2020 10:15 AM, Mark Brown wrote:
> On Tue, Apr 21, 2020 at 10:11:52AM -0700, Florian Fainelli wrote:
> 
>>> Applied to
> 
>>>      https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7
> 
>> It would be nice if the URL could be clickable, e.g.:
> 
>> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-5.7
> 
> That then doesn't work with git itself unfortunately, someone's got to
> loose out :/
> 

Could you provide both links with a market at the front, e.g.:

Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 
for-5.7
CGIT URL: 
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-5.7
-- 
Florian

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 469 bytes --]

On Tue, Apr 21, 2020 at 10:17:10AM -0700, Florian Fainelli wrote:

> > That then doesn't work with git itself unfortunately, someone's got to
> > loose out :/

> Could you provide both links with a market at the front, e.g.:

> Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
> for-5.7
> CGIT URL: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-5.7

Ask Konstantin to implement it (I'm using b4 ty now) and I might!

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Patch v3 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers

[Kamal Dasu]

On Tue, Apr 21, 2020 at 10:59 AM Mark Brown <broonie@kernel.org> wrote:
>
> On Tue, Apr 21, 2020 at 10:53:57AM -0400, Kamal Dasu wrote:
> > On Tue, Apr 21, 2020 at 8:50 AM Mark Brown <broonie@kernel.org> wrote:
>
> > > If this is a fix it should have been near the start of the series before
> > > any new features to make sure that it can be applied cleanly as a fix.
>
> > Yes it could can be after [Patch v3 3/9] spi: bcm-qspi: Handle lack of
> > MSPI_REV offset
>
> That's not a fix though, that's adding support for new devices?

Since its dependent on knowing if the MSPI_REV register exists on a
given SoC and path 3/9, maybe I can remove the fixes tag for that
commit.

Kamal

Kamal

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Konstantin Ryabitsev]

On Tue, Apr 21, 2020 at 06:20:05PM +0100, Mark Brown wrote:
> > Could you provide both links with a market at the front, e.g.:
> 
> > Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
> > for-5.7
> > CGIT URL: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-5.7
> 
> Ask Konstantin to implement it (I'm using b4 ty now) and I might!

You can do this already in the template, if your treename is set to the 
https URL.

----
Applied to

Git:   ${treename} ${branch}
Link:  ${treename}/log/?h=${branch}
----

-K

Re: [Patch v3 1/9] spi: bcm-qspi: Handle clock probe deferral

[Mark Brown]

On Mon, 20 Apr 2020 15:08:45 -0400, Kamal Dasu wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
> 
> The clock provider may not be ready by the time spi-bcm-qspi gets
> probed, handle probe deferral using devm_clk_get_optional().
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.7

Thanks!

[1/9] spi: bcm-qspi: Handle clock probe deferral
      commit: 0392727c261bab65a35cd4f82ee9459bc237591d
[2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs
      (not applied)
[3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset
      (not applied)
[4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change
      commit: 742d5958062488d03082a9ff01a6afb3cf7bd634
[5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
      commit: 4df3bea7f9d2ddd9ac2c29ba945c7c4db2def29c
[6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management
      commit: 1b7ad8c405c3dc0ad6c2dc61fe21fe7a446cceeb
[7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds
      (not applied)
[8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz
      (not applied)
[9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers
      (not applied)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark