linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gregor Pintar <grpintar@gmail.com>
To: tiwai@suse.com, perex@perex.cz, alexander@tsoy.me
Cc: linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
	grpintar@gmail.com
Subject: [PATCH v2] ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2
Date: Mon, 20 Apr 2020 23:40:30 +0200	[thread overview]
Message-ID: <20200420214030.2361-1-grpintar@gmail.com> (raw)
In-Reply-To: <1c4b8a362761421eba0ded60bb4f0e11b7e42f3b.camel@tsoy.me>

Force it to use asynchronous playback.

Same quirk has already been added for Focusrite Scarlett Solo (2nd gen)
with a commit 46f5710f0b88 ("ALSA: usb-audio: Add quirk for Focusrite
Scarlett Solo").

This also seems to prevent regular clicks when playing at 44100Hz
on Scarlett 2i2 (2nd gen). I did not notice any side effects.

Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested.

Signed-off-by: Gregor Pintar <grpintar@gmail.com>
---
 sound/usb/quirks-table.h | 84 ----------------------------------------
 sound/usb/quirks.c       | 13 +++++++
 2 files changed, 13 insertions(+), 84 deletions(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index e009d584e..7e06ab108 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2756,90 +2756,6 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		.type = QUIRK_MIDI_NOVATION
 	}
 },
-{
-	/*
-	 * Focusrite Scarlett Solo 2nd generation
-	 * Reports that playback should use Synch: Synchronous
-	 * while still providing a feedback endpoint. Synchronous causes
-	 * snapping on some sample rates.
-	 * Force it to use Synch: Asynchronous.
-	 */
-	USB_DEVICE(0x1235, 0x8205),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
-					.formats = SNDRV_PCM_FMTBIT_S32_LE,
-					.channels = 2,
-					.iface = 1,
-					.altsetting = 1,
-					.altset_idx = 1,
-					.attributes = 0,
-					.endpoint = 0x01,
-					.ep_attr = USB_ENDPOINT_XFER_ISOC |
-						   USB_ENDPOINT_SYNC_ASYNC,
-					.protocol = UAC_VERSION_2,
-					.rates = SNDRV_PCM_RATE_44100 |
-						 SNDRV_PCM_RATE_48000 |
-						 SNDRV_PCM_RATE_88200 |
-						 SNDRV_PCM_RATE_96000 |
-						 SNDRV_PCM_RATE_176400 |
-						 SNDRV_PCM_RATE_192000,
-					.rate_min = 44100,
-					.rate_max = 192000,
-					.nr_rates = 6,
-					.rate_table = (unsigned int[]) {
-						44100, 48000, 88200,
-						96000, 176400, 192000
-					},
-					.clock = 41
-				}
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
-					.formats = SNDRV_PCM_FMTBIT_S32_LE,
-					.channels = 2,
-					.iface = 2,
-					.altsetting = 1,
-					.altset_idx = 1,
-					.attributes = 0,
-					.endpoint = 0x82,
-					.ep_attr = USB_ENDPOINT_XFER_ISOC |
-						   USB_ENDPOINT_SYNC_ASYNC |
-						   USB_ENDPOINT_USAGE_IMPLICIT_FB,
-					.protocol = UAC_VERSION_2,
-					.rates = SNDRV_PCM_RATE_44100 |
-						 SNDRV_PCM_RATE_48000 |
-						 SNDRV_PCM_RATE_88200 |
-						 SNDRV_PCM_RATE_96000 |
-						 SNDRV_PCM_RATE_176400 |
-						 SNDRV_PCM_RATE_192000,
-					.rate_min = 44100,
-					.rate_max = 192000,
-					.nr_rates = 6,
-					.rate_table = (unsigned int[]) {
-						44100, 48000, 88200,
-						96000, 176400, 192000
-					},
-					.clock = 41
-				}
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
-		}
-	}
-},
 
 /* Access Music devices */
 {
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index a8ece1701..6c2dfd3bf 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1806,6 +1806,19 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
 		 */
 		fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
 		break;
+	case USB_ID(0x1235, 0x8202):  /* Focusrite Scarlett 2i2 2nd gen */
+	case USB_ID(0x1235, 0x8205):  /* Focusrite Scarlett Solo 2nd gen */
+		/*
+		 * Reports that playback should use Synch: Synchronous
+		 * while still providing a feedback endpoint.
+		 * Synchronous causes snapping on some sample rates.
+		 * Force it to use Synch: Asynchronous.
+		 */
+		if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
+			fp->ep_attr |= USB_ENDPOINT_SYNC_ASYNC;
+		}
+		break;
 	}
 }
 
-- 
2.20.1


  reply	other threads:[~2020-04-20 21:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-20 20:19 [PATCH] ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2 Gregor Pintar
2020-04-20 20:25 ` Alexander Tsoy
2020-04-20 21:40   ` Gregor Pintar [this message]
2020-04-20 23:47     ` [PATCH v2] " Alexander Tsoy
2020-04-21  6:06     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200420214030.2361-1-grpintar@gmail.com \
    --to=grpintar@gmail.com \
    --cc=alexander@tsoy.me \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).