From: David Miller <davem@davemloft.net>
To: o.rempel@pengutronix.de
Cc: andrew@lunn.ch, f.fainelli@gmail.com, hkallweit1@gmail.com,
david@protonic.nl, kernel@pengutronix.de,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
philippe.schenker@toradex.com, linux@armlinux.org.uk
Subject: Re: [PATCH net-next v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY
Date: Wed, 22 Apr 2020 19:39:07 -0700 (PDT) [thread overview]
Message-ID: <20200422.193907.1128604166633852958.davem@davemloft.net> (raw)
In-Reply-To: <20200422072137.8517-1-o.rempel@pengutronix.de>
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Wed, 22 Apr 2020 09:21:37 +0200
> Add support for following phy-modes: rgmii, rgmii-id, rgmii-txid, rgmii-rxid.
>
> This PHY has an internal RX delay of 1.2ns and no delay for TX.
>
> The pad skew registers allow to set the total TX delay to max 1.38ns and
> the total RX delay to max of 2.58ns (configurable 1.38ns + build in
> 1.2ns) and a minimal delay of 0ns.
>
> According to the RGMII v1.3 specification the delay provided by PCB traces
> should be between 1.5ns and 2.0ns. The RGMII v2.0 allows to provide this
> delay by MAC or PHY. So, we configure this PHY to the best values we can
> get by this HW: TX delay to 1.38ns (max supported value) and RX delay to
> 1.80ns (best calculated delay)
>
> The phy-modes can still be fine tuned/overwritten by *-skew-ps
> device tree properties described in:
> Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Applied, thank you.
next prev parent reply other threads:[~2020-04-23 2:39 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-22 7:21 [PATCH net-next v3] net: phy: micrel: add phy-mode support for the KSZ9031 PHY Oleksij Rempel
2020-04-22 8:48 ` Philippe Schenker
2020-04-22 13:39 ` Andrew Lunn
2020-04-23 2:39 ` David Miller [this message]
2020-04-28 15:28 ` Geert Uytterhoeven
2020-04-28 15:47 ` Andrew Lunn
2020-04-28 16:16 ` Philippe Schenker
2020-04-29 8:45 ` Geert Uytterhoeven
2020-04-29 9:26 ` Oleksij Rempel
2020-05-27 19:11 ` Geert Uytterhoeven
2020-05-27 20:52 ` Andrew Lunn
2020-05-28 13:10 ` Geert Uytterhoeven
2020-05-28 16:08 ` Andrew Lunn
2020-05-29 4:59 ` Oleksij Rempel
2020-05-29 10:17 ` Geert Uytterhoeven
2020-05-28 8:20 ` Philippe Schenker
2020-05-28 12:51 ` Geert Uytterhoeven
2020-05-28 23:31 ` Florian Fainelli
2020-04-29 10:02 ` Philippe Schenker
2020-05-05 18:26 ` Grygorii Strashko
2020-05-06 4:51 ` Oleksij Rempel
2020-07-10 22:36 ` Alexandre Belloni
2020-07-10 22:54 ` Andrew Lunn
2020-07-10 23:25 ` Alexandre Belloni
-- strict thread matches above, loose matches on Subject: below --
2020-04-07 9:36 Oleksij Rempel
2020-04-07 10:57 ` Philippe Schenker
2020-04-07 11:02 ` Marc Kleine-Budde
2020-04-07 12:34 ` Philippe Schenker
2020-04-07 11:05 ` Russell King - ARM Linux admin
2020-04-07 20:13 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200422.193907.1128604166633852958.davem@davemloft.net \
--to=davem@davemloft.net \
--cc=andrew@lunn.ch \
--cc=david@protonic.nl \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=philippe.schenker@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).