[PATCH 5.4 000/118] 5.4.35-rc1 review

[PATCH 5.4 000/118] 5.4.35-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.35 release.
There are 118 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 24 Apr 2020 09:48:23 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.35-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.35-rc1

Daniel Borkmann <daniel@iogearbox.net>
    bpf, test_verifier: switch bpf_get_stack's 0 s> r8 test

John Fastabend <john.fastabend@gmail.com>
    bpf: Test_progs, add test to catch retval refine error handling

John Fastabend <john.fastabend@gmail.com>
    bpf: Test_verifier, bpf_get_stack return value add <0

Daniel Borkmann <daniel@iogearbox.net>
    bpf: fix buggy r0 retval refinement for tracing helpers

Waiman Long <longman@redhat.com>
    KEYS: Don't write out to userspace while holding key semaphore

Wen Yang <wenyang@linux.alibaba.com>
    mtd: phram: fix a double free issue in error path

Dan Carpenter <dan.carpenter@oracle.com>
    mtd: lpddr: Fix a double free in probe()

Jonathan Neuschäfer <j.neuschaefer@gmx.net>
    docs: Fix path to MTD command line partition parser

Frieder Schrempf <frieder.schrempf@kontron.de>
    mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

Christophe Kerello <christophe.kerello@st.com>
    mtd: rawnand: free the nand_device object

Paul E. McKenney <paulmck@kernel.org>
    locktorture: Print ratio of acquisitions, not failures

Stephen Rothwell <sfr@canb.auug.org.au>
    tty: evh_bytechan: Fix out of bounds accesses

Nathan Chancellor <natechancellor@gmail.com>
    fbmem: Adjust indentation in fb_prepare_logo and fb_blank

Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
    iio: si1133: read 24-bit signed integer for measurement

Jernej Skrabec <jernej.skrabec@siol.net>
    ARM: dts: sunxi: Fix DE2 clocks register range

Dan Carpenter <dan.carpenter@oracle.com>
    fbdev: potential information leak in do_fb_ioctl()

Grygorii Strashko <grygorii.strashko@ti.com>
    dma-debug: fix displaying of dma allocation type

Florian Fainelli <f.fainelli@gmail.com>
    net: dsa: bcm_sf2: Fix overflow checks

Ben Skeggs <bskeggs@redhat.com>
    drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init

Chao Yu <chao@kernel.org>
    f2fs: fix to wait all node page writeback

Adrian Huang <ahuang12@lenovo.com>
    iommu/amd: Fix the configuration of GCR3 table root pointer

Dan Carpenter <dan.carpenter@oracle.com>
    libnvdimm: Out of bounds read in __nd_ioctl()

Jeffery Miller <jmiller@neverware.com>
    power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks.

Guo Ren <guoren@linux.alibaba.com>
    csky: Fixup init_fpu compile warning with __init

Chuck Lever <chuck.lever@oracle.com>
    sunrpc: Fix gss_unwrap_resp_integ() again

Jan Kara <jack@suse.cz>
    ext2: fix debug reference to ext2_xattr_cache

Jacob Pan <jacob.jun.pan@linux.intel.com>
    iommu/vt-d: Fix page request descriptor size

Qian Cai <cai@lca.pw>
    iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()

Randy Dunlap <rdunlap@infradead.org>
    ext2: fix empty body warnings when -Wextra is used

Olga Kornievskaia <olga.kornievskaia@gmail.com>
    SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsize

Jacob Pan <jacob.jun.pan@linux.intel.com>
    iommu/vt-d: Fix mm reference leak

Jean-Philippe Brucker <jean-philippe@linaro.org>
    iommu/virtio: Fix freeing of incomplete domains

Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
    drm/vc4: Fix HDMI mode validation

Alan Maguire <alan.maguire@oracle.com>
    um: falloc.h needs to be directly included for older libc

Bob Moore <robert.moore@intel.com>
    ACPICA: Fixes for acpiExec namespace init file

Chao Yu <chao@kernel.org>
    f2fs: fix NULL pointer dereference in f2fs_write_begin()

Guo Ren <guoren@linux.alibaba.com>
    csky: Fixup get wrong psr value from phyical reg

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix memory leaks in nfs_pageio_stop_mirroring()

Jack Zhang <Jack.Zhang1@amd.com>
    drm/amdkfd: kfree the wrong pointer

Guo Ren <guoren@linux.alibaba.com>
    csky: Fixup cpu speculative execution to IO area

Qian Cai <cai@lca.pw>
    x86: ACPI: fix CPU hotplug deadlock

Ricardo Ribalda Delgado <ribalda@kernel.org>
    leds: core: Fix warning message when init_data

Karol Herbst <kherbst@redhat.com>
    drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges

David Hildenbrand <david@redhat.com>
    KVM: s390: vsie: Fix possible race when shadowing region 3 tables

Vegard Nossum <vegard.nossum@oracle.com>
    compiler.h: fix error in BUILD_BUG_ON() reporting

Qian Cai <cai@lca.pw>
    percpu_counter: fix a data race at vm_committed_as

Steven Price <steven.price@arm.com>
    include/linux/swapops.h: correct guards for non_swap_entry()

Ralph Campbell <rcampbell@nvidia.com>
    drm/nouveau/svm: fix vma range check for migration

Ralph Campbell <rcampbell@nvidia.com>
    drm/nouveau/svm: check for SVM initialized before migrating

Christophe Leroy <christophe.leroy@c-s.fr>
    mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS

Long Li <longli@microsoft.com>
    cifs: Allocate encryption header through kmalloc

Gabriel Krisman Bertazi <krisman@collabora.com>
    um: ubd: Prevent buffer overrun on command completion

Eric Sandeen <sandeen@redhat.com>
    ext4: do not commit super on read-only bdev

Thomas Richter <tmricht@linux.ibm.com>
    s390/cpum_sf: Fix wrong page count in error message

Nathan Chancellor <natechancellor@gmail.com>
    powerpc/maple: Fix declaration made after definition

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/prom_init: Pass the "os-term" message to hypervisor

Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
    btrfs: add RCU locks around block group initialization

Domenico Andreoli <domenico.andreoli@linux.com>
    hibernate: Allow uswsusp to write to swap

Alexander Gordeev <agordeev@linux.ibm.com>
    s390/cpuinfo: fix wrong output when CPU0 is offline

Sahitya Tummala <stummala@codeaurora.org>
    f2fs: Add a new CP flag to help fsck fix resize SPO issues

Sahitya Tummala <stummala@codeaurora.org>
    f2fs: Fix mount failure due to SPO after a successful online resize FS

Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
    NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails

Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
    phy: uniphier-usb3ss: Add Pro5 support

Chao Yu <chao@kernel.org>
    f2fs: fix to show norecovery mount option

Michael Roth <mdroth@linux.vnet.ibm.com>
    KVM: PPC: Book3S HV: Fix H_CEDE return code for nested guests

Johan Jonker <jbx6244@gmail.com>
    ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc

Murphy Zhou <jencce.kernel@gmail.com>
    NFSv4.2: error out when relink swapfile

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4/pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: alloc_nfs_open_context() must use the file cred when available

Alexandre Belloni <alexandre.belloni@bootlin.com>
    rtc: 88pm860x: fix possible race condition

Kevin Grandemange <kevin.grandemange@allegrodvt.com>
    dma-coherent: fix integer overflow in the reserved-memory dma allocation

Lucas Stach <l.stach@pengutronix.de>
    soc: imx: gpc: fix power up sequencing

Russell King <rmk+kernel@armlinux.org.uk>
    arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay

Jon Hunter <jonathanh@nvidia.com>
    arm64: tegra: Fix Tegra194 PCIe compatible string

Vidya Sagar <vidyas@nvidia.com>
    arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194

Sowjanya Komatineni <skomatineni@nvidia.com>
    clk: tegra: Fix Tegra PMC clock out parents

Dmitry Osipenko <digetx@gmail.com>
    power: supply: bq27xxx_battery: Silence deferred-probe error

Jernej Skrabec <jernej.skrabec@siol.net>
    arm64: dts: allwinner: a64: Fix display clock register range

Johan Jonker <jbx6244@gmail.com>
    ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc

Sahitya Tummala <stummala@codeaurora.org>
    f2fs: fix the panic in do_checkpoint()

Aya Levin <ayal@mellanox.com>
    net/mlx5e: Enforce setting of a single FEC mode

Claudiu Beznea <claudiu.beznea@microchip.com>
    clk: at91: usb: continue if clk_hw_round_rate() return zero

Stephen Boyd <sboyd@kernel.org>
    clk: Don't cache errors from clk_ops::get_phase()

xinhui pan <xinhui.pan@amd.com>
    drm/ttm: flush the fence on the bo after we individualize the reservation object

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump

Ilya Dryomov <idryomov@gmail.com>
    rbd: call rbd_dev_unprobe() after unwatching and flushing notifies

Ilya Dryomov <idryomov@gmail.com>
    rbd: avoid a deadlock on header_rwsem when flushing notifies

Paolo Valente <paolo.valente@linaro.org>
    block, bfq: invoke flush_idle_tree after reparent_active_queues in pd_offline

Paolo Valente <paolo.valente@linaro.org>
    block, bfq: make reparent_leaf_entity actually work only on leaf entities

Paolo Valente <paolo.valente@linaro.org>
    block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroup

David Howells <dhowells@redhat.com>
    afs: Fix race between post-modification dir edit and readdir/d_revalidate

David Howells <dhowells@redhat.com>
    afs: Fix afs_d_validate() to set the right directory version

David Howells <dhowells@redhat.com>
    afs: Fix rename operation status delivery

David Howells <dhowells@redhat.com>
    afs: Fix decoding of inline abort codes from version 1 status records

David Howells <dhowells@redhat.com>
    afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus()

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/Hyper-V: Report crash data in die() when panic_on_oops is set

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/Hyper-V: Report crash register data or kmsg before running crash kernel

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/Hyper-V: Trigger crash enlightenment only once during system crash.

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/Hyper-V: Unload vmbus channel in hv panic callback

Frank Rowand <frank.rowand@sony.com>
    of: overlay: kmemleak in dup_and_fixup_symbol_prop()

Frank Rowand <frank.rowand@sony.com>
    of: unittest: kmemleak in of_unittest_overlay_high_level()

Frank Rowand <frank.rowand@sony.com>
    of: unittest: kmemleak in of_unittest_platform_populate()

Frank Rowand <frank.rowand@sony.com>
    of: unittest: kmemleak on changeset destroy

Magnus Karlsson <magnus.karlsson@intel.com>
    xsk: Add missing check on user supplied headroom size

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Don't release card at firmware loading error

Zenghui Yu <yuzenghui@huawei.com>
    irqchip/mbigen: Free msi_desc on device teardown

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object type

Slava Bacherikov <slava@bacher09.org>
    kbuild, btf: Fix dependencies for DEBUG_INFO_BTF

Martin Fuzzey <martin.fuzzey@flowbird.group>
    ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops

Li Bin <huawei.libin@huawei.com>
    scsi: sg: add sg_remove_request in sg_common_write

Josh Poimboeuf <jpoimboe@redhat.com>
    objtool: Fix switch table detection in .text.unlikely

Luke Nelson <lukenels@cs.washington.edu>
    arm, bpf: Fix offset overflow for BPF_MEM BPF_DW

Luke Nelson <lukenels@cs.washington.edu>
    arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0

Li RongQing <lirongqing@baidu.com>
    xsk: Fix out of boundary write in __xsk_rcv_memcpy

Michael Walle <michael@walle.cc>
    watchdog: sp805: fix restart handler

Roman Gushchin <guro@fb.com>
    ext4: use non-movable memory for superblock readahead


-------------

Diffstat:

 Documentation/admin-guide/kernel-parameters.txt    |   2 +-
 .../bindings/pci/nvidia,tegra194-pcie.txt          |   2 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |   5 +-
 arch/arm/boot/dts/imx6qp.dtsi                      |   1 -
 arch/arm/boot/dts/rk3188-bqedison2qc.dts           |  29 +++---
 arch/arm/boot/dts/sun8i-a83t.dtsi                  |   2 +-
 arch/arm/boot/dts/sun8i-r40.dtsi                   |   2 +-
 arch/arm/boot/dts/sun8i-v3s.dtsi                   |   2 +-
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 |   2 +-
 arch/arm/net/bpf_jit_32.c                          |  52 ++++++----
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |   2 +-
 .../dts/marvell/armada-8040-clearfog-gt-8k.dts     |   1 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           | 111 +++++++++++++++++++--
 arch/csky/abiv1/inc/abi/entry.h                    |   5 +-
 arch/csky/abiv2/fpu.c                              |   5 -
 arch/csky/abiv2/inc/abi/entry.h                    |   7 +-
 arch/csky/abiv2/inc/abi/fpu.h                      |   3 +-
 arch/csky/include/asm/processor.h                  |   1 +
 arch/csky/kernel/head.S                            |   5 +
 arch/csky/kernel/setup.c                           |  63 +++---------
 arch/csky/kernel/smp.c                             |   6 ++
 arch/csky/kernel/traps.c                           |  11 +-
 arch/csky/mm/fault.c                               |   7 ++
 arch/powerpc/kernel/prom_init.c                    |   3 +
 arch/powerpc/kvm/book3s_hv.c                       |   1 +
 arch/powerpc/platforms/maple/setup.c               |  34 +++----
 arch/s390/kernel/perf_cpum_sf.c                    |   1 +
 arch/s390/kernel/processor.c                       |   5 +-
 arch/s390/mm/gmap.c                                |   1 +
 arch/um/drivers/ubd_kern.c                         |   4 +-
 arch/um/os-Linux/file.c                            |   1 +
 arch/x86/hyperv/hv_init.c                          |   6 +-
 arch/x86/kernel/acpi/cstate.c                      |   3 +-
 arch/x86/kernel/cpu/mshyperv.c                     |  10 ++
 block/bfq-cgroup.c                                 |  73 ++++++++------
 block/bfq-iosched.c                                |   2 -
 block/bfq-iosched.h                                |   1 +
 drivers/acpi/acpica/acnamesp.h                     |   2 +
 drivers/acpi/acpica/dbinput.c                      |  16 ++-
 drivers/acpi/acpica/dswexec.c                      |  33 ++++++
 drivers/acpi/acpica/dswload.c                      |   2 -
 drivers/acpi/acpica/dswload2.c                     |  35 +++++++
 drivers/acpi/acpica/nsnames.c                      |   6 +-
 drivers/acpi/acpica/utdelete.c                     |   9 +-
 drivers/acpi/processor_throttling.c                |   7 --
 drivers/block/rbd.c                                |  25 +++--
 drivers/clk/at91/clk-usb.c                         |   3 +
 drivers/clk/clk.c                                  |  48 ++++++---
 drivers/clk/tegra/clk-tegra-pmc.c                  |  12 +--
 drivers/gpu/drm/amd/amdkfd/kfd_device.c            |   4 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c              |  63 ++++++++++++
 drivers/gpu/drm/nouveau/nouveau_drv.h              |   2 +
 drivers/gpu/drm/nouveau/nouveau_svm.c              |   6 ++
 drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c     |  26 +++++
 drivers/gpu/drm/ttm/ttm_bo.c                       |   4 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c                     |  20 +++-
 drivers/hv/channel_mgmt.c                          |   3 +
 drivers/hv/vmbus_drv.c                             |  62 ++++++++----
 drivers/iio/light/si1133.c                         |  37 ++++---
 drivers/iommu/amd_iommu_types.h                    |   2 +-
 drivers/iommu/intel-iommu.c                        |   3 +-
 drivers/iommu/intel-svm.c                          |   9 +-
 drivers/iommu/virtio-iommu.c                       |  16 +--
 drivers/irqchip/irq-mbigen.c                       |   8 +-
 drivers/leds/led-class.c                           |   2 +-
 drivers/mtd/devices/phram.c                        |  15 +--
 drivers/mtd/lpddr/lpddr_cmds.c                     |   1 -
 drivers/mtd/nand/raw/nand_base.c                   |   2 +
 drivers/mtd/nand/spi/core.c                        |   1 +
 drivers/net/dsa/bcm_sf2_cfp.c                      |   9 +-
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |   4 +
 drivers/nvdimm/bus.c                               |   6 +-
 drivers/of/overlay.c                               |   2 +
 drivers/of/unittest.c                              |  16 ++-
 drivers/phy/socionext/phy-uniphier-usb3ss.c        |   4 +
 drivers/power/supply/axp288_fuel_gauge.c           |   4 +-
 drivers/power/supply/bq27xxx_battery.c             |   5 +-
 drivers/rtc/rtc-88pm860x.c                         |  14 +--
 drivers/scsi/sg.c                                  |   4 +-
 drivers/soc/imx/gpc.c                              |  24 +++--
 drivers/tty/ehv_bytechan.c                         |  21 +++-
 drivers/video/fbdev/core/fbmem.c                   |  38 +++----
 drivers/watchdog/sp805_wdt.c                       |   4 +
 fs/afs/dir.c                                       | 108 ++++++++++++--------
 fs/afs/dir_silly.c                                 |  22 ++--
 fs/afs/fsclient.c                                  |  27 +++--
 fs/afs/yfsclient.c                                 |  20 ++--
 fs/block_dev.c                                     |   4 +-
 fs/btrfs/block-group.c                             |   2 +
 fs/buffer.c                                        |  11 ++
 fs/cifs/transport.c                                |  28 ++++--
 fs/ext2/xattr.c                                    |   8 +-
 fs/ext4/inode.c                                    |   2 +-
 fs/ext4/super.c                                    |   5 +-
 fs/f2fs/checkpoint.c                               |  24 +++--
 fs/f2fs/f2fs.h                                     |   3 +-
 fs/f2fs/gc.c                                       |   6 ++
 fs/f2fs/node.c                                     |   7 +-
 fs/f2fs/super.c                                    |  14 ++-
 fs/nfs/callback_proc.c                             |   2 +
 fs/nfs/direct.c                                    |   2 +
 fs/nfs/inode.c                                     |  10 +-
 fs/nfs/nfs4file.c                                  |   3 +
 fs/nfs/pagelist.c                                  |  17 ++--
 include/acpi/processor.h                           |   8 ++
 include/asm-generic/mshyperv.h                     |   2 +-
 include/keys/big_key-type.h                        |   2 +-
 include/keys/user-type.h                           |   3 +-
 include/linux/buffer_head.h                        |   8 ++
 include/linux/compiler.h                           |   2 +-
 include/linux/f2fs_fs.h                            |   1 +
 include/linux/hugetlb.h                            |  19 ++--
 include/linux/key-type.h                           |   2 +-
 include/linux/percpu_counter.h                     |   4 +-
 include/linux/swapops.h                            |   3 +-
 kernel/bpf/verifier.c                              |  45 +++++++--
 kernel/dma/coherent.c                              |  13 +--
 kernel/dma/debug.c                                 |   9 +-
 kernel/locking/locktorture.c                       |   8 +-
 lib/Kconfig.debug                                  |   2 +
 net/dns_resolver/dns_key.c                         |   2 +-
 net/netfilter/nf_tables_api.c                      |   4 +-
 net/rxrpc/key.c                                    |  27 ++---
 net/sunrpc/auth_gss/auth_gss.c                     |  80 +++++++++++----
 net/xdp/xdp_umem.c                                 |   5 +-
 net/xdp/xsk.c                                      |   5 +-
 security/keys/big_key.c                            |  11 +-
 security/keys/encrypted-keys/encrypted.c           |   7 +-
 security/keys/keyctl.c                             |  73 +++++++++++---
 security/keys/keyring.c                            |   6 +-
 security/keys/request_key_auth.c                   |   7 +-
 security/keys/trusted.c                            |  14 +--
 security/keys/user_defined.c                       |   5 +-
 sound/pci/hda/hda_intel.c                          |  23 ++---
 tools/objtool/check.c                              |   5 +-
 .../selftests/bpf/prog_tests/get_stack_raw_tp.c    |   5 +
 .../selftests/bpf/progs/test_get_stack_rawtp_err.c |  26 +++++
 .../testing/selftests/bpf/verifier/bpf_get_stack.c |   8 +-
 139 files changed, 1263 insertions(+), 620 deletions(-)

[PATCH 5.4 001/118] ext4: use non-movable memory for superblock readahead

[Greg Kroah-Hartman]

From: Roman Gushchin <guro@fb.com>

commit d87f639258a6a5980183f11876c884931ad93da2 upstream.

Since commit a8ac900b8163 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.

However commit 85c8f176a611 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.

It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.

Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a611 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/buffer.c                 |   11 +++++++++++
 fs/ext4/inode.c             |    2 +-
 fs/ext4/super.c             |    2 +-
 include/linux/buffer_head.h |    8 ++++++++
 4 files changed, 21 insertions(+), 2 deletions(-)

--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1337,6 +1337,17 @@ void __breadahead(struct block_device *b
 }
 EXPORT_SYMBOL(__breadahead);
 
+void __breadahead_gfp(struct block_device *bdev, sector_t block, unsigned size,
+		      gfp_t gfp)
+{
+	struct buffer_head *bh = __getblk_gfp(bdev, block, size, gfp);
+	if (likely(bh)) {
+		ll_rw_block(REQ_OP_READ, REQ_RAHEAD, 1, &bh);
+		brelse(bh);
+	}
+}
+EXPORT_SYMBOL(__breadahead_gfp);
+
 /**
  *  __bread_gfp() - reads a specified block and returns the bh
  *  @bdev: the block_device to read from
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4680,7 +4680,7 @@ make_io:
 			if (end > table)
 				end = table;
 			while (b <= end)
-				sb_breadahead(sb, b++);
+				sb_breadahead_unmovable(sb, b++);
 		}
 
 		/*
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4283,7 +4283,7 @@ static int ext4_fill_super(struct super_
 	/* Pre-read the descriptors into the buffer cache */
 	for (i = 0; i < db_count; i++) {
 		block = descriptor_loc(sb, logical_sb_block, i);
-		sb_breadahead(sb, block);
+		sb_breadahead_unmovable(sb, block);
 	}
 
 	for (i = 0; i < db_count; i++) {
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -189,6 +189,8 @@ struct buffer_head *__getblk_gfp(struct
 void __brelse(struct buffer_head *);
 void __bforget(struct buffer_head *);
 void __breadahead(struct block_device *, sector_t block, unsigned int size);
+void __breadahead_gfp(struct block_device *, sector_t block, unsigned int size,
+		  gfp_t gfp);
 struct buffer_head *__bread_gfp(struct block_device *,
 				sector_t block, unsigned size, gfp_t gfp);
 void invalidate_bh_lrus(void);
@@ -319,6 +321,12 @@ sb_breadahead(struct super_block *sb, se
 	__breadahead(sb->s_bdev, block, sb->s_blocksize);
 }
 
+static inline void
+sb_breadahead_unmovable(struct super_block *sb, sector_t block)
+{
+	__breadahead_gfp(sb->s_bdev, block, sb->s_blocksize, 0);
+}
+
 static inline struct buffer_head *
 sb_getblk(struct super_block *sb, sector_t block)
 {

[PATCH 5.4 002/118] watchdog: sp805: fix restart handler

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream.

The restart handler is missing two things, first, the registers
has to be unlocked and second there is no synchronization for the
write_relaxed() calls.

This was tested on a custom board with the NXP LS1028A SoC.

Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/watchdog/sp805_wdt.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -137,10 +137,14 @@ wdt_restart(struct watchdog_device *wdd,
 {
 	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
 
+	writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
 	writel_relaxed(0, wdt->base + WDTCONTROL);
 	writel_relaxed(0, wdt->base + WDTLOAD);
 	writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
 
+	/* Flush posted writes. */
+	readl_relaxed(wdt->base + WDTLOCK);
+
 	return 0;
 }
 

[PATCH 5.4 003/118] xsk: Fix out of boundary write in __xsk_rcv_memcpy

[Greg Kroah-Hartman]

From: Li RongQing <lirongqing@baidu.com>

commit db5c97f02373917efe2c218ebf8e3d8b19e343b6 upstream.

first_len is the remainder of the first page we're copying.
If this size is larger, then out of page boundary write will
otherwise happen.

Fixes: c05cd3645814 ("xsk: add support to allow unaligned chunk placement")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/1585813930-19712-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xdp/xsk.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -129,8 +129,9 @@ static void __xsk_rcv_memcpy(struct xdp_
 		u64 page_start = addr & ~(PAGE_SIZE - 1);
 		u64 first_len = PAGE_SIZE - (addr - page_start);
 
-		memcpy(to_buf, from_buf, first_len + metalen);
-		memcpy(next_pg_addr, from_buf + first_len, len - first_len);
+		memcpy(to_buf, from_buf, first_len);
+		memcpy(next_pg_addr, from_buf + first_len,
+		       len + metalen - first_len);
 
 		return;
 	}

[PATCH 5.4 004/118] arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0

[Greg Kroah-Hartman]

From: Luke Nelson <lukenels@cs.washington.edu>

commit bb9562cf5c67813034c96afb50bd21130a504441 upstream.

The current arm BPF JIT does not correctly compile RSH or ARSH when the
immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64
by 0 imm" BPF selftests to hang the kernel by reaching an instruction
the verifier determines to be unreachable.

The root cause is in how immediate right shifts are encoded on arm.
For LSR and ASR (logical and arithmetic right shift), a bit-pattern
of 00000 in the immediate encodes a shift amount of 32. When the BPF
immediate is 0, the generated code shifts by 32 instead of the expected
behavior (a no-op).

This patch fixes the bugs by adding an additional check if the BPF
immediate is 0. After the change, the above mentioned BPF selftests pass.

Fixes: 39c13c204bb11 ("arm: eBPF JIT compiler")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200408181229.10909-1-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/net/bpf_jit_32.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -929,7 +929,11 @@ static inline void emit_a32_rsh_i64(cons
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do LSR operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for LSR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx);
@@ -955,7 +959,11 @@ static inline void emit_a32_arsh_i64(con
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do ARSH operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for ASR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx);

[PATCH 5.4 005/118] arm, bpf: Fix offset overflow for BPF_MEM BPF_DW

[Greg Kroah-Hartman]

From: Luke Nelson <lukenels@cs.washington.edu>

commit 4178417cc5359c329790a4a8f4a6604612338cca upstream.

This patch fixes an incorrect check in how immediate memory offsets are
computed for BPF_DW on arm.

For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte
access into two separate 4-byte accesses using off+0 and off+4. If off
fits in imm12, the JIT emits a ldr/str instruction with the immediate
and avoids the use of a temporary register. While the current check off
<= 0xfff ensures that the first immediate off+0 doesn't overflow imm12,
it's not sufficient for the second immediate off+4, which may cause the
second access of BPF_DW to read/write the wrong address.

This patch fixes the problem by changing the check to
off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow.

A side effect of simplifying the check is that it now allows using
negative immediate offsets in ldr/str. This means that small negative
offsets can also avoid the use of a temporary register.

This patch introduces no new failures in test_verifier or test_bpf.c.

Fixes: c5eae692571d6 ("ARM: net: bpf: improve 64-bit store implementation")
Fixes: ec19e02b343db ("ARM: net: bpf: fix LDX instructions")
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/net/bpf_jit_32.c |   40 ++++++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 16 deletions(-)

--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -1000,21 +1000,35 @@ static inline void emit_a32_mul_r64(cons
 	arm_bpf_put_reg32(dst_hi, rd[0], ctx);
 }
 
+static bool is_ldst_imm(s16 off, const u8 size)
+{
+	s16 off_max = 0;
+
+	switch (size) {
+	case BPF_B:
+	case BPF_W:
+		off_max = 0xfff;
+		break;
+	case BPF_H:
+		off_max = 0xff;
+		break;
+	case BPF_DW:
+		/* Need to make sure off+4 does not overflow. */
+		off_max = 0xfff - 4;
+		break;
+	}
+	return -off_max <= off && off <= off_max;
+}
+
 /* *(size *)(dst + off) = src */
 static inline void emit_str_r(const s8 dst, const s8 src[],
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
-	s32 off_max;
 	s8 rd;
 
 	rd = arm_bpf_get_reg32(dst, tmp[1], ctx);
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx);
 		rd = tmp[0];
@@ -1043,18 +1057,12 @@ static inline void emit_str_r(const s8 d
 
 /* dst = *(size*)(src + off) */
 static inline void emit_ldx_r(const s8 dst[], const s8 src,
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
 	s8 rm = src;
-	s32 off_max;
-
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
 
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
 		rm = tmp[0];

[PATCH 5.4 006/118] objtool: Fix switch table detection in .text.unlikely

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@redhat.com>

commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream.

If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:

  drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
  drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
  drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame

Fix it by comparing the function, instead of the section and offset.

Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/objtool/check.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1010,10 +1010,7 @@ static struct rela *find_jump_table(stru
 	 * it.
 	 */
 	for (;
-	     &insn->list != &file->insn_list &&
-	     insn->sec == func->sec &&
-	     insn->offset >= func->offset;
-
+	     &insn->list != &file->insn_list && insn->func && insn->func->pfunc == func;
 	     insn = insn->first_jump_src ?: list_prev_entry(insn, list)) {
 
 		if (insn != orig_insn && insn->type == INSN_JUMP_DYNAMIC)

[PATCH 5.4 007/118] scsi: sg: add sg_remove_request in sg_common_write

[Greg Kroah-Hartman]

From: Li Bin <huawei.libin@huawei.com>

commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream.

If the dxfer_len is greater than 256M then the request is invalid and we
need to call sg_remove_request in sg_common_write.

Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com
Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sg.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -803,8 +803,10 @@ sg_common_write(Sg_fd * sfp, Sg_request
 			"sg_common_write:  scsi opcode=0x%02x, cmd_size=%d\n",
 			(int) cmnd[0], (int) hp->cmd_len));
 
-	if (hp->dxfer_len >= SZ_256M)
+	if (hp->dxfer_len >= SZ_256M) {
+		sg_remove_request(sfp, srp);
 		return -EINVAL;
+	}
 
 	k = sg_start_req(srp, cmnd);
 	if (k) {

[PATCH 5.4 008/118] ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 10db5bccc390e8e4bd9fcd1fbd4f1b23f271a405 upstream.

freeze_noirq and thaw_noirq need to check the PM availability like
other PM ops.  There are cases where the device got disabled due to
the error, and the PM operation should be ignored for that.

Fixes: 3e6db33aaf1d ("ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1068,6 +1068,8 @@ static int azx_freeze_noirq(struct devic
 	struct azx *chip = card->private_data;
 	struct pci_dev *pci = to_pci_dev(dev);
 
+	if (!azx_is_pm_ready(card))
+		return 0;
 	if (chip->driver_type == AZX_DRIVER_SKL)
 		pci_set_power_state(pci, PCI_D3hot);
 
@@ -1080,6 +1082,8 @@ static int azx_thaw_noirq(struct device
 	struct azx *chip = card->private_data;
 	struct pci_dev *pci = to_pci_dev(dev);
 
+	if (!azx_is_pm_ready(card))
+		return 0;
 	if (chip->driver_type == AZX_DRIVER_SKL)
 		pci_set_power_state(pci, PCI_D0);
 

[PATCH 5.4 009/118] ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.

[Greg Kroah-Hartman]

From: Martin Fuzzey <martin.fuzzey@flowbird.group>

commit 4141f1a40fc0789f6fd4330e171e1edf155426aa upstream.

In order to wake from suspend by ethernet magic packets the GPC
must be used as intc does not have wakeup functionality.

But the FEC DT node currently uses interrupt-extended,
specificying intc, thus breaking WoL.

This problem is probably fallout from the stacked domain conversion
as intc used to chain to GPC.

So replace "interrupts-extended" by "interrupts" to use the default
parent which is GPC.

Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains")

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6qdl.dtsi |    5 ++---
 arch/arm/boot/dts/imx6qp.dtsi  |    1 -
 2 files changed, 2 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1039,9 +1039,8 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupt-names = "int0", "pps";
-				interrupts-extended =
-					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
-					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>;
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -77,7 +77,6 @@
 };
 
 &fec {
-	/delete-property/interrupts-extended;
 	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };

[PATCH 5.4 010/118] kbuild, btf: Fix dependencies for DEBUG_INFO_BTF

[Greg Kroah-Hartman]

From: Slava Bacherikov <slava@bacher09.org>

commit 7d32e69310d67e6b04af04f26193f79dfc2f05c7 upstream.

Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also
enabled will produce invalid btf file, since gen_btf function in
link-vmlinux.sh script doesn't handle *.dwo files.

Enabling DEBUG_INFO_REDUCED will also produce invalid btf file,
and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense.

Fixes: e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux")
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Signed-off-by: Slava Bacherikov <slava@bacher09.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200402204138.408021-1-slava@bacher09.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/Kconfig.debug |    2 ++
 1 file changed, 2 insertions(+)

--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -223,6 +223,8 @@ config DEBUG_INFO_DWARF4
 config DEBUG_INFO_BTF
 	bool "Generate BTF typeinfo"
 	depends on DEBUG_INFO
+	depends on !DEBUG_INFO_SPLIT && !DEBUG_INFO_REDUCED
+	depends on !GCC_PLUGIN_RANDSTRUCT || COMPILE_TEST
 	help
 	  Generate deduplicated BTF type information from DWARF debug info.
 	  Turning this on expects presence of pahole tool, which will convert

[PATCH 5.4 011/118] netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object type

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit d9583cdf2f38d0f526d9a8c8564dd2e35e649bc7 upstream.

EINVAL should be used for malformed netlink messages. New userspace
utility and old kernels might easily result in EINVAL when exercising
new set features, which is misleading.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_tables_api.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3598,7 +3598,7 @@ static int nf_tables_newset(struct net *
 			      NFT_SET_INTERVAL | NFT_SET_TIMEOUT |
 			      NFT_SET_MAP | NFT_SET_EVAL |
 			      NFT_SET_OBJECT))
-			return -EINVAL;
+			return -EOPNOTSUPP;
 		/* Only one of these operations is supported */
 		if ((flags & (NFT_SET_MAP | NFT_SET_OBJECT)) ==
 			     (NFT_SET_MAP | NFT_SET_OBJECT))
@@ -3636,7 +3636,7 @@ static int nf_tables_newset(struct net *
 		objtype = ntohl(nla_get_be32(nla[NFTA_SET_OBJ_TYPE]));
 		if (objtype == NFT_OBJECT_UNSPEC ||
 		    objtype > NFT_OBJECT_MAX)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	} else if (flags & NFT_SET_OBJECT)
 		return -EINVAL;
 	else

[PATCH 5.4 012/118] irqchip/mbigen: Free msi_desc on device teardown

[Greg Kroah-Hartman]

From: Zenghui Yu <yuzenghui@huawei.com>

commit edfc23f6f9fdbd7825d50ac1f380243cde19b679 upstream.

Using irq_domain_free_irqs_common() on the irqdomain free path will
leave the MSI descriptor unfreed when platform devices get removed.
Properly free it by MSI domain free function.

Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/irqchip/irq-mbigen.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -220,10 +220,16 @@ static int mbigen_irq_domain_alloc(struc
 	return 0;
 }
 
+static void mbigen_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				   unsigned int nr_irqs)
+{
+	platform_msi_domain_free(domain, virq, nr_irqs);
+}
+
 static const struct irq_domain_ops mbigen_domain_ops = {
 	.translate	= mbigen_domain_translate,
 	.alloc		= mbigen_irq_domain_alloc,
-	.free		= irq_domain_free_irqs_common,
+	.free		= mbigen_irq_domain_free,
 };
 
 static int mbigen_of_create_domain(struct platform_device *pdev,

[PATCH 5.4 013/118] ALSA: hda: Dont release card at firmware loading error

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 upstream.

At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata.  This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.

Instead, we continue the probing as if it were no option set.  This is
often a better choice than the forced abort, too.

Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |   19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1980,24 +1980,15 @@ static void azx_firmware_cb(const struct
 {
 	struct snd_card *card = context;
 	struct azx *chip = card->private_data;
-	struct pci_dev *pci = chip->pci;
 
-	if (!fw) {
-		dev_err(card->dev, "Cannot load firmware, aborting\n");
-		goto error;
-	}
-
-	chip->fw = fw;
+	if (fw)
+		chip->fw = fw;
+	else
+		dev_err(card->dev, "Cannot load firmware, continue without patching\n");
 	if (!chip->disabled) {
 		/* continue probing */
-		if (azx_probe_continue(chip))
-			goto error;
+		azx_probe_continue(chip);
 	}
-	return; /* OK */
-
- error:
-	snd_card_free(card);
-	pci_set_drvdata(pci, NULL);
 }
 #endif
 

[PATCH 5.4 014/118] xsk: Add missing check on user supplied headroom size

[Greg Kroah-Hartman]

From: Magnus Karlsson <magnus.karlsson@intel.com>

commit 99e3a236dd43d06c65af0a2ef9cb44306aef6e02 upstream.

Add a check that the headroom cannot be larger than the available
space in the chunk. In the current code, a malicious user can set the
headroom to a value larger than the chunk size minus the fixed XDP
headroom. That way packets with a length larger than the supported
size in the umem could get accepted and result in an out-of-bounds
write.

Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225
Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xdp/xdp_umem.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/xdp/xdp_umem.c
+++ b/net/xdp/xdp_umem.c
@@ -343,7 +343,7 @@ static int xdp_umem_reg(struct xdp_umem
 	u32 chunk_size = mr->chunk_size, headroom = mr->headroom;
 	unsigned int chunks, chunks_per_page;
 	u64 addr = mr->addr, size = mr->len;
-	int size_chk, err;
+	int err;
 
 	if (chunk_size < XDP_UMEM_MIN_CHUNK_SIZE || chunk_size > PAGE_SIZE) {
 		/* Strictly speaking we could support this, if:
@@ -382,8 +382,7 @@ static int xdp_umem_reg(struct xdp_umem
 			return -EINVAL;
 	}
 
-	size_chk = chunk_size - headroom - XDP_PACKET_HEADROOM;
-	if (size_chk < 0)
+	if (headroom >= chunk_size - XDP_PACKET_HEADROOM)
 		return -EINVAL;
 
 	umem->address = (unsigned long)addr;

[PATCH 5.4 015/118] of: unittest: kmemleak on changeset destroy

[Greg Kroah-Hartman]

From: Frank Rowand <frank.rowand@sony.com>

commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.

of_unittest_changeset() reaches deeply into the dynamic devicetree
functions.  Several nodes were left with an elevated reference
count and thus were not properly cleaned up.  Fix the reference
counts so that the memory will be freed.

Fixes: 201c910bd689 ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/unittest.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -776,6 +776,10 @@ static void __init of_unittest_changeset
 	unittest(!of_changeset_revert(&chgset), "revert failed\n");
 
 	of_changeset_destroy(&chgset);
+
+	of_node_put(n1);
+	of_node_put(n2);
+	of_node_put(n21);
 #endif
 }
 

[PATCH 5.4 016/118] of: unittest: kmemleak in of_unittest_platform_populate()

[Greg Kroah-Hartman]

From: Frank Rowand <frank.rowand@sony.com>

commit 216830d2413cc61be3f76bc02ffd905e47d2439e upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.

of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices).  Fix the platform
device reference counts so that the memory will be freed.

Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/unittest.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1065,10 +1065,13 @@ static void __init of_unittest_platform_
 
 	of_platform_populate(np, match, NULL, &test_bus->dev);
 	for_each_child_of_node(np, child) {
-		for_each_child_of_node(child, grandchild)
-			unittest(of_find_device_by_node(grandchild),
+		for_each_child_of_node(child, grandchild) {
+			pdev = of_find_device_by_node(grandchild);
+			unittest(pdev,
 				 "Could not create device for node '%pOFn'\n",
 				 grandchild);
+			of_dev_put(pdev);
+		}
 	}
 
 	of_platform_depopulate(&test_bus->dev);

[PATCH 5.4 017/118] of: unittest: kmemleak in of_unittest_overlay_high_level()

[Greg Kroah-Hartman]

From: Frank Rowand <frank.rowand@sony.com>

commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.

of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.

Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/unittest.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2481,8 +2481,11 @@ static __init void of_unittest_overlay_h
 				goto err_unlock;
 			}
 			if (__of_add_property(of_symbols, new_prop)) {
+				kfree(new_prop->name);
+				kfree(new_prop->value);
+				kfree(new_prop);
 				/* "name" auto-generated by unflatten */
-				if (!strcmp(new_prop->name, "name"))
+				if (!strcmp(prop->name, "name"))
 					continue;
 				unittest(0, "duplicate property '%s' in overlay_base node __symbols__",
 					 prop->name);

[PATCH 5.4 018/118] of: overlay: kmemleak in dup_and_fixup_symbol_prop()

[Greg Kroah-Hartman]

From: Frank Rowand <frank.rowand@sony.com>

commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream.

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.

target_path was not freed in the non-error path.

Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/overlay.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -261,6 +261,8 @@ static struct property *dup_and_fixup_sy
 
 	of_property_set_flag(new_prop, OF_DYNAMIC);
 
+	kfree(target_path);
+
 	return new_prop;
 
 err_free_new_prop:

[PATCH 5.4 019/118] x86/Hyper-V: Unload vmbus channel in hv panic callback

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

commit 74347a99e73ae00b8385f1209aaea193c670f901 upstream.

When kdump is not configured, a Hyper-V VM might still respond to
network traffic after a kernel panic when kernel parameter panic=0.
The panic CPU goes into an infinite loop with interrupts enabled,
and the VMbus driver interrupt handler still works because the
VMbus connection is unloaded only in the kdump path.  The network
responses make the other end of the connection think the VM is
still functional even though it has panic'ed, which could affect any
failover actions that should be taken.

Fix this by unloading the VMbus connection during the panic process.
vmbus_initiate_unload() could then be called twice (e.g., by
hyperv_panic_event() and hv_crash_handler(), so reset the connection
state in vmbus_initiate_unload() to ensure the unload is done only
once.

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-2-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hv/channel_mgmt.c |    3 +++
 drivers/hv/vmbus_drv.c    |   21 +++++++++++++--------
 2 files changed, 16 insertions(+), 8 deletions(-)

--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -839,6 +839,9 @@ void vmbus_initiate_unload(bool crash)
 {
 	struct vmbus_channel_message_header hdr;
 
+	if (xchg(&vmbus_connection.conn_state, DISCONNECTED) == DISCONNECTED)
+		return;
+
 	/* Pre-Win2012R2 hosts don't support reconnect */
 	if (vmbus_proto_version < VERSION_WIN8_1)
 		return;
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -53,9 +53,12 @@ static int hyperv_panic_event(struct not
 {
 	struct pt_regs *regs;
 
-	regs = current_pt_regs();
+	vmbus_initiate_unload(true);
 
-	hyperv_report_panic(regs, val);
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) {
+		regs = current_pt_regs();
+		hyperv_report_panic(regs, val);
+	}
 	return NOTIFY_DONE;
 }
 
@@ -1389,10 +1392,16 @@ static int vmbus_bus_init(void)
 		}
 
 		register_die_notifier(&hyperv_die_block);
-		atomic_notifier_chain_register(&panic_notifier_list,
-					       &hyperv_panic_block);
 	}
 
+	/*
+	 * Always register the panic notifier because we need to unload
+	 * the VMbus channel connection to prevent any VMbus
+	 * activity after the VM panics.
+	 */
+	atomic_notifier_chain_register(&panic_notifier_list,
+			       &hyperv_panic_block);
+
 	vmbus_request_offers();
 
 	return 0;
@@ -2202,8 +2211,6 @@ static int vmbus_bus_suspend(struct devi
 
 	vmbus_initiate_unload(false);
 
-	vmbus_connection.conn_state = DISCONNECTED;
-
 	/* Reset the event for the next resume. */
 	reinit_completion(&vmbus_connection.ready_for_resume_event);
 
@@ -2288,7 +2295,6 @@ static void hv_kexec_handler(void)
 {
 	hv_stimer_global_cleanup();
 	vmbus_initiate_unload(false);
-	vmbus_connection.conn_state = DISCONNECTED;
 	/* Make sure conn_state is set as hv_synic_cleanup checks for it */
 	mb();
 	cpuhp_remove_state(hyperv_cpuhp_online);
@@ -2305,7 +2311,6 @@ static void hv_crash_handler(struct pt_r
 	 * doing the cleanup for current CPU only. This should be sufficient
 	 * for kdump.
 	 */
-	vmbus_connection.conn_state = DISCONNECTED;
 	cpu = smp_processor_id();
 	hv_stimer_cleanup(cpu);
 	hv_synic_disable_regs(cpu);

[PATCH 5.4 020/118] x86/Hyper-V: Trigger crash enlightenment only once during system crash.

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

commit 73f26e526f19afb3a06b76b970a76bcac2cafd05 upstream.

When a guest VM panics, Hyper-V should be notified only once via the
crash synthetic MSRs.  Current Linux code might write these crash MSRs
twice during a system panic:
1) hyperv_panic/die_event() calling hyperv_report_panic()
2) hv_kmsg_dump() calling hyperv_report_panic_msg()

Fix this by not calling hyperv_report_panic() if a kmsg dump has been
successfully registered.  The notification will happen later via
hyperv_report_panic_msg().

Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-4-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hv/vmbus_drv.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -55,7 +55,13 @@ static int hyperv_panic_event(struct not
 
 	vmbus_initiate_unload(true);
 
-	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) {
+	/*
+	 * Hyper-V should be notified only once about a panic.  If we will be
+	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
+	 * the notification here.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE
+	    && !hv_panic_page) {
 		regs = current_pt_regs();
 		hyperv_report_panic(regs, val);
 	}
@@ -68,7 +74,13 @@ static int hyperv_die_event(struct notif
 	struct die_args *die = (struct die_args *)args;
 	struct pt_regs *regs = die->regs;
 
-	hyperv_report_panic(regs, val);
+	/*
+	 * Hyper-V should be notified only once about a panic.  If we will be
+	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
+	 * the notification here.
+	 */
+	if (!hv_panic_page)
+		hyperv_report_panic(regs, val);
 	return NOTIFY_DONE;
 }
 

[PATCH 5.4 021/118] x86/Hyper-V: Report crash register data or kmsg before running crash kernel

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

commit a11589563e96bf262767294b89b25a9d44e7303b upstream.

We want to notify Hyper-V when a Linux guest VM crash occurs, so
there is a record of the crash even when kdump is enabled.   But
crash_kexec_post_notifiers defaults to "false", so the kdump kernel
runs before the notifiers and Hyper-V never gets notified.  Fix this by
always setting crash_kexec_post_notifiers to be true for Hyper-V VMs.

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-5-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mshyperv.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -263,6 +263,16 @@ static void __init ms_hyperv_init_platfo
 			cpuid_eax(HYPERV_CPUID_NESTED_FEATURES);
 	}
 
+	/*
+	 * Hyper-V expects to get crash register data or kmsg when
+	 * crash enlightment is available and system crashes. Set
+	 * crash_kexec_post_notifiers to be true to make sure that
+	 * calling crash enlightment interface before running kdump
+	 * kernel.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE)
+		crash_kexec_post_notifiers = true;
+
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (ms_hyperv.features & HV_X64_ACCESS_FREQUENCY_MSRS &&
 	    ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE) {

[PATCH 5.4 022/118] x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

commit 040026df7088c56ccbad28f7042308f67bde63df upstream.

When sysctl_record_panic_msg is not set, the panic will
not be reported to Hyper-V via hyperv_report_panic_msg().
So the crash should be reported via hyperv_report_panic().

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-6-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hv/vmbus_drv.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -48,6 +48,18 @@ static int hyperv_cpuhp_online;
 
 static void *hv_panic_page;
 
+/*
+ * Boolean to control whether to report panic messages over Hyper-V.
+ *
+ * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
+ */
+static int sysctl_record_panic_msg = 1;
+
+static int hyperv_report_reg(void)
+{
+	return !sysctl_record_panic_msg || !hv_panic_page;
+}
+
 static int hyperv_panic_event(struct notifier_block *nb, unsigned long val,
 			      void *args)
 {
@@ -61,7 +73,7 @@ static int hyperv_panic_event(struct not
 	 * the notification here.
 	 */
 	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE
-	    && !hv_panic_page) {
+	    && hyperv_report_reg()) {
 		regs = current_pt_regs();
 		hyperv_report_panic(regs, val);
 	}
@@ -79,7 +91,7 @@ static int hyperv_die_event(struct notif
 	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
 	 * the notification here.
 	 */
-	if (!hv_panic_page)
+	if (hyperv_report_reg())
 		hyperv_report_panic(regs, val);
 	return NOTIFY_DONE;
 }
@@ -1262,13 +1274,6 @@ static void vmbus_isr(void)
 }
 
 /*
- * Boolean to control whether to report panic messages over Hyper-V.
- *
- * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
- */
-static int sysctl_record_panic_msg = 1;
-
-/*
  * Callback from kmsg_dump. Grab as much as possible from the end of the kmsg
  * buffer and call into Hyper-V to transfer the data.
  */

[PATCH 5.4 023/118] x86/Hyper-V: Report crash data in die() when panic_on_oops is set

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

commit f3a99e761efa616028b255b4de58e9b5b87c5545 upstream.

When oops happens with panic_on_oops unset, the oops
thread is killed by die() and system continues to run.
In such case, guest should not report crash register
data to host since system still runs. Check panic_on_oops
and return directly in hyperv_report_panic() when the function
is called in the die() and panic_on_oops is unset. Fix it.

Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful")
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/hyperv/hv_init.c      |    6 +++++-
 drivers/hv/vmbus_drv.c         |    5 +++--
 include/asm-generic/mshyperv.h |    2 +-
 3 files changed, 9 insertions(+), 4 deletions(-)

--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/hyperv.h>
 #include <linux/slab.h>
+#include <linux/kernel.h>
 #include <linux/cpuhotplug.h>
 #include <clocksource/hyperv_timer.h>
 
@@ -354,11 +355,14 @@ void hyperv_cleanup(void)
 }
 EXPORT_SYMBOL_GPL(hyperv_cleanup);
 
-void hyperv_report_panic(struct pt_regs *regs, long err)
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
 {
 	static bool panic_reported;
 	u64 guest_id;
 
+	if (in_die && !panic_on_oops)
+		return;
+
 	/*
 	 * We prefer to report panic on 'die' chain as we have proper
 	 * registers to report, but if we miss it (e.g. on BUG()) we need
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -31,6 +31,7 @@
 #include <linux/kdebug.h>
 #include <linux/efi.h>
 #include <linux/random.h>
+#include <linux/kernel.h>
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
 #include "hyperv_vmbus.h"
@@ -75,7 +76,7 @@ static int hyperv_panic_event(struct not
 	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE
 	    && hyperv_report_reg()) {
 		regs = current_pt_regs();
-		hyperv_report_panic(regs, val);
+		hyperv_report_panic(regs, val, false);
 	}
 	return NOTIFY_DONE;
 }
@@ -92,7 +93,7 @@ static int hyperv_die_event(struct notif
 	 * the notification here.
 	 */
 	if (hyperv_report_reg())
-		hyperv_report_panic(regs, val);
+		hyperv_report_panic(regs, val, true);
 	return NOTIFY_DONE;
 }
 
--- a/include/asm-generic/mshyperv.h
+++ b/include/asm-generic/mshyperv.h
@@ -163,7 +163,7 @@ static inline int cpumask_to_vpset(struc
 	return nr_bank;
 }
 
-void hyperv_report_panic(struct pt_regs *regs, long err);
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die);
 void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
 bool hv_is_hyperv_initialized(void);
 void hyperv_cleanup(void);

[PATCH 5.4 024/118] afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit c72057b56f7e24865840a6961d801a7f21d30a5f upstream.

If we receive a status record that has VNOVNODE set in the abort field,
xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() don't advance
the XDR pointer, thereby corrupting anything subsequent decodes from the
same block of data.

This has the potential to affect AFS.InlineBulkStatus and
YFS.InlineBulkStatus operation, but probably doesn't since the status
records are extracted as individual blocks of data and the buffer pointer
is reset between blocks.

It does affect YFS.RemoveFile2 operation, corrupting the volsync record -
though that is not currently used.

Other operations abort the entire operation rather than returning an error
inline, in which case there is no decoding to be done.

Fix this by unconditionally advancing the xdr pointer.

Fixes: 684b0f68cf1c ("afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/fsclient.c  |   14 +++++++++-----
 fs/afs/yfsclient.c |   12 ++++++++----
 2 files changed, 17 insertions(+), 9 deletions(-)

--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -65,6 +65,7 @@ static int xdr_decode_AFSFetchStatus(con
 	bool inline_error = (call->operation_ID == afs_FS_InlineBulkStatus);
 	u64 data_version, size;
 	u32 type, abort_code;
+	int ret;
 
 	abort_code = ntohl(xdr->abort_code);
 
@@ -78,7 +79,7 @@ static int xdr_decode_AFSFetchStatus(con
 			 */
 			status->abort_code = abort_code;
 			scb->have_error = true;
-			return 0;
+			goto good;
 		}
 
 		pr_warn("Unknown AFSFetchStatus version %u\n", ntohl(xdr->if_version));
@@ -87,7 +88,7 @@ static int xdr_decode_AFSFetchStatus(con
 
 	if (abort_code != 0 && inline_error) {
 		status->abort_code = abort_code;
-		return 0;
+		goto good;
 	}
 
 	type = ntohl(xdr->type);
@@ -123,13 +124,16 @@ static int xdr_decode_AFSFetchStatus(con
 	data_version |= (u64)ntohl(xdr->data_version_hi) << 32;
 	status->data_version = data_version;
 	scb->have_status = true;
-
+good:
+	ret = 0;
+advance:
 	*_bp = (const void *)*_bp + sizeof(*xdr);
-	return 0;
+	return ret;
 
 bad:
 	xdr_dump_bad(*_bp);
-	return afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	goto advance;
 }
 
 static time64_t xdr_decode_expiry(struct afs_call *call, u32 expiry)
--- a/fs/afs/yfsclient.c
+++ b/fs/afs/yfsclient.c
@@ -186,13 +186,14 @@ static int xdr_decode_YFSFetchStatus(con
 	const struct yfs_xdr_YFSFetchStatus *xdr = (const void *)*_bp;
 	struct afs_file_status *status = &scb->status;
 	u32 type;
+	int ret;
 
 	status->abort_code = ntohl(xdr->abort_code);
 	if (status->abort_code != 0) {
 		if (status->abort_code == VNOVNODE)
 			status->nlink = 0;
 		scb->have_error = true;
-		return 0;
+		goto good;
 	}
 
 	type = ntohl(xdr->type);
@@ -220,13 +221,16 @@ static int xdr_decode_YFSFetchStatus(con
 	status->size		= xdr_to_u64(xdr->size);
 	status->data_version	= xdr_to_u64(xdr->data_version);
 	scb->have_status	= true;
-
+good:
+	ret = 0;
+advance:
 	*_bp += xdr_size(xdr);
-	return 0;
+	return ret;
 
 bad:
 	xdr_dump_bad(*_bp);
-	return afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	ret = afs_protocol_error(call, -EBADMSG, afs_eproto_bad_status);
+	goto advance;
 }
 
 /*

[PATCH 5.4 025/118] afs: Fix decoding of inline abort codes from version 1 status records

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 3e0d9892c0e7fa426ca6bf921cb4b543ca265714 upstream.

If we're decoding an AFSFetchStatus record and we see that the version is 1
and the abort code is set and we're expecting inline errors, then we store
the abort code and ignore the remaining status record (which is correct),
but we don't set the flag to say we got a valid abort code.

This can affect operation of YFS.RemoveFile2 when removing a file and the
operation of {,Y}FS.InlineBulkStatus when prospectively constructing or
updating of a set of inodes during a lookup.

Fix this to indicate the reception of a valid abort code.

Fixes: a38a75581e6e ("afs: Fix unlink to handle YFS.RemoveFile2 better")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/fsclient.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -88,6 +88,7 @@ static int xdr_decode_AFSFetchStatus(con
 
 	if (abort_code != 0 && inline_error) {
 		status->abort_code = abort_code;
+		scb->have_error = true;
 		goto good;
 	}
 

[PATCH 5.4 026/118] afs: Fix rename operation status delivery

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit b98f0ec91c42d87a70da42726b852ac8d78a3257 upstream.

The afs_deliver_fs_rename() and yfs_deliver_fs_rename() functions both only
decode the second file status returned unless the parent directories are
different - unfortunately, this means that the xdr pointer isn't advanced
and the volsync record will be read incorrectly in such an instance.

Fix this by always decoding the second status into the second
status/callback block which wasn't being used if the dirs were the same.

The afs_update_dentry_version() calls that update the directory data
version numbers on the dentries can then unconditionally use the second
status record as this will always reflect the state of the destination dir
(the two records will be identical if the destination dir is the same as
the source dir)

Fixes: 260a980317da ("[AFS]: Add "directory write" support.")
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/dir.c       |   13 +++----------
 fs/afs/fsclient.c  |   12 ++++++------
 fs/afs/yfsclient.c |    8 +++-----
 3 files changed, 12 insertions(+), 21 deletions(-)

--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1892,7 +1892,6 @@ static int afs_rename(struct inode *old_
 	if (afs_begin_vnode_operation(&fc, orig_dvnode, key, true)) {
 		afs_dataversion_t orig_data_version;
 		afs_dataversion_t new_data_version;
-		struct afs_status_cb *new_scb = &scb[1];
 
 		orig_data_version = orig_dvnode->status.data_version + 1;
 
@@ -1904,7 +1903,6 @@ static int afs_rename(struct inode *old_
 			new_data_version = new_dvnode->status.data_version + 1;
 		} else {
 			new_data_version = orig_data_version;
-			new_scb = &scb[0];
 		}
 
 		while (afs_select_fileserver(&fc)) {
@@ -1912,7 +1910,7 @@ static int afs_rename(struct inode *old_
 			fc.cb_break_2 = afs_calc_vnode_cb_break(new_dvnode);
 			afs_fs_rename(&fc, old_dentry->d_name.name,
 				      new_dvnode, new_dentry->d_name.name,
-				      &scb[0], new_scb);
+				      &scb[0], &scb[1]);
 		}
 
 		afs_vnode_commit_status(&fc, orig_dvnode, fc.cb_break,
@@ -1957,13 +1955,8 @@ static int afs_rename(struct inode *old_
 		 * Note that if we ever implement RENAME_EXCHANGE, we'll have
 		 * to update both dentries with opposing dir versions.
 		 */
-		if (new_dvnode != orig_dvnode) {
-			afs_update_dentry_version(&fc, old_dentry, &scb[1]);
-			afs_update_dentry_version(&fc, new_dentry, &scb[1]);
-		} else {
-			afs_update_dentry_version(&fc, old_dentry, &scb[0]);
-			afs_update_dentry_version(&fc, new_dentry, &scb[0]);
-		}
+		afs_update_dentry_version(&fc, old_dentry, &scb[1]);
+		afs_update_dentry_version(&fc, new_dentry, &scb[1]);
 		d_move(old_dentry, new_dentry);
 		goto error_tmp;
 	}
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -988,16 +988,16 @@ static int afs_deliver_fs_rename(struct
 	if (ret < 0)
 		return ret;
 
-	/* unmarshall the reply once we've received all of it */
+	/* If the two dirs are the same, we have two copies of the same status
+	 * report, so we just decode it twice.
+	 */
 	bp = call->buffer;
 	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_dir_scb);
 	if (ret < 0)
 		return ret;
-	if (call->out_dir_scb != call->out_scb) {
-		ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
-		if (ret < 0)
-			return ret;
-	}
+	ret = xdr_decode_AFSFetchStatus(&bp, call, call->out_scb);
+	if (ret < 0)
+		return ret;
 	xdr_decode_AFSVolSync(&bp, call->out_volsync);
 
 	_leave(" = 0 [done]");
--- a/fs/afs/yfsclient.c
+++ b/fs/afs/yfsclient.c
@@ -1158,11 +1158,9 @@ static int yfs_deliver_fs_rename(struct
 	ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_dir_scb);
 	if (ret < 0)
 		return ret;
-	if (call->out_dir_scb != call->out_scb) {
-		ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_scb);
-		if (ret < 0)
-			return ret;
-	}
+	ret = xdr_decode_YFSFetchStatus(&bp, call, call->out_scb);
+	if (ret < 0)
+		return ret;
 
 	xdr_decode_YFSVolSync(&bp, call->out_volsync);
 	_leave(" = 0 [done]");

[PATCH 5.4 027/118] afs: Fix afs_d_validate() to set the right directory version

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 40fc81027f892284ce31f8b6de1e497f5b47e71f upstream.

If a dentry's version is somewhere between invalid_before and the current
directory version, we should be setting it forward to the current version,
not backwards to the invalid_before version.  Note that we're only doing
this at all because dentry::d_fsdata isn't large enough on a 32-bit system.

Fix this by using a separate variable for invalid_before so that we don't
accidentally clobber the current dir version.

Fixes: a4ff7401fbfa ("afs: Keep track of invalid-before version for dentry coherency")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/dir.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1032,7 +1032,7 @@ static int afs_d_revalidate(struct dentr
 	struct dentry *parent;
 	struct inode *inode;
 	struct key *key;
-	afs_dataversion_t dir_version;
+	afs_dataversion_t dir_version, invalid_before;
 	long de_version;
 	int ret;
 
@@ -1084,8 +1084,8 @@ static int afs_d_revalidate(struct dentr
 	if (de_version == (long)dir_version)
 		goto out_valid_noupdate;
 
-	dir_version = dir->invalid_before;
-	if (de_version - (long)dir_version >= 0)
+	invalid_before = dir->invalid_before;
+	if (de_version - (long)invalid_before >= 0)
 		goto out_valid;
 
 	_debug("dir modified");

[PATCH 5.4 028/118] afs: Fix race between post-modification dir edit and readdir/d_revalidate

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 2105c2820d366b76f38e6ad61c75771881ecc532 upstream.

AFS directories are retained locally as a structured file, with lookup
being effected by a local search of the file contents.  When a modification
(such as mkdir) happens, the dir file content is modified locally rather
than redownloading the directory.

The directory contents are accessed in a number of ways, with a number of
different locks schemes:

 (1) Download of contents - dvnode->validate_lock/write in afs_read_dir().

 (2) Lookup and readdir - dvnode->validate_lock/read in afs_dir_iterate(),
     downgrading from (1) if necessary.

 (3) d_revalidate of child dentry - dvnode->validate_lock/read in
     afs_do_lookup_one() downgrading from (1) if necessary.

 (4) Edit of dir after modification - page locks on individual dir pages.

Unfortunately, because (4) uses different locking scheme to (1) - (3),
nothing protects against the page being scanned whilst the edit is
underway.  Even download is not safe as it doesn't lock the pages - relying
instead on the validate_lock to serialise as a whole (the theory being that
directory contents are treated as a block and always downloaded as a
block).

Fix this by write-locking dvnode->validate_lock around the edits.  Care
must be taken in the rename case as there may be two different dirs - but
they need not be locked at the same time.  In any case, once the lock is
taken, the directory version must be rechecked, and the edit skipped if a
later version has been downloaded by revalidation (there can't have been
any local changes because the VFS holds the inode lock, but there can have
been remote changes).

Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/dir.c       |   91 ++++++++++++++++++++++++++++++++++++-----------------
 fs/afs/dir_silly.c |   22 ++++++++----
 2 files changed, 77 insertions(+), 36 deletions(-)

--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -1275,6 +1275,7 @@ static int afs_mkdir(struct inode *dir,
 	struct afs_fs_cursor fc;
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	mode |= S_IFDIR;
@@ -1295,7 +1296,7 @@ static int afs_mkdir(struct inode *dir,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1316,10 +1317,14 @@ static int afs_mkdir(struct inode *dir,
 		goto error_key;
 	}
 
-	if (ret == 0 &&
-	    test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
-		afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
-				 afs_edit_dir_for_create);
+	if (ret == 0) {
+		down_write(&dvnode->validate_lock);
+		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+		    dvnode->status.data_version == data_version)
+			afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
+					 afs_edit_dir_for_create);
+		up_write(&dvnode->validate_lock);
+	}
 
 	key_put(key);
 	kfree(scb);
@@ -1360,6 +1365,7 @@ static int afs_rmdir(struct inode *dir,
 	struct afs_fs_cursor fc;
 	struct afs_vnode *dvnode = AFS_FS_I(dir), *vnode = NULL;
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	_enter("{%llx:%llu},{%pd}",
@@ -1391,7 +1397,7 @@ static int afs_rmdir(struct inode *dir,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1404,9 +1410,12 @@ static int afs_rmdir(struct inode *dir,
 		ret = afs_end_vnode_operation(&fc);
 		if (ret == 0) {
 			afs_dir_remove_subdir(dentry);
-			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+			down_write(&dvnode->validate_lock);
+			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+			    dvnode->status.data_version == data_version)
 				afs_edit_dir_remove(dvnode, &dentry->d_name,
 						    afs_edit_dir_for_rmdir);
+			up_write(&dvnode->validate_lock);
 		}
 	}
 
@@ -1544,10 +1553,15 @@ static int afs_unlink(struct inode *dir,
 		ret = afs_end_vnode_operation(&fc);
 		if (ret == 0 && !(scb[1].have_status || scb[1].have_error))
 			ret = afs_dir_remove_link(dvnode, dentry, key);
-		if (ret == 0 &&
-		    test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
-			afs_edit_dir_remove(dvnode, &dentry->d_name,
-					    afs_edit_dir_for_unlink);
+
+		if (ret == 0) {
+			down_write(&dvnode->validate_lock);
+			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+			    dvnode->status.data_version == data_version)
+				afs_edit_dir_remove(dvnode, &dentry->d_name,
+						    afs_edit_dir_for_unlink);
+			up_write(&dvnode->validate_lock);
+		}
 	}
 
 	if (need_rehash && ret < 0 && ret != -ENOENT)
@@ -1573,6 +1587,7 @@ static int afs_create(struct inode *dir,
 	struct afs_status_cb *scb;
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	mode |= S_IFREG;
@@ -1597,7 +1612,7 @@ static int afs_create(struct inode *dir,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1618,9 +1633,12 @@ static int afs_create(struct inode *dir,
 		goto error_key;
 	}
 
-	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+	down_write(&dvnode->validate_lock);
+	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+	    dvnode->status.data_version == data_version)
 		afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
 				 afs_edit_dir_for_create);
+	up_write(&dvnode->validate_lock);
 
 	kfree(scb);
 	key_put(key);
@@ -1648,6 +1666,7 @@ static int afs_link(struct dentry *from,
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct afs_vnode *vnode = AFS_FS_I(d_inode(from));
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	_enter("{%llx:%llu},{%llx:%llu},{%pd}",
@@ -1672,7 +1691,7 @@ static int afs_link(struct dentry *from,
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		if (mutex_lock_interruptible_nested(&vnode->io_lock, 1) < 0) {
 			afs_end_vnode_operation(&fc);
@@ -1702,9 +1721,12 @@ static int afs_link(struct dentry *from,
 		goto error_key;
 	}
 
-	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+	down_write(&dvnode->validate_lock);
+	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+	    dvnode->status.data_version == data_version)
 		afs_edit_dir_add(dvnode, &dentry->d_name, &vnode->fid,
 				 afs_edit_dir_for_link);
+	up_write(&dvnode->validate_lock);
 
 	key_put(key);
 	kfree(scb);
@@ -1732,6 +1754,7 @@ static int afs_symlink(struct inode *dir
 	struct afs_status_cb *scb;
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
 	struct key *key;
+	afs_dataversion_t data_version;
 	int ret;
 
 	_enter("{%llx:%llu},{%pd},%s",
@@ -1759,7 +1782,7 @@ static int afs_symlink(struct inode *dir
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t data_version = dvnode->status.data_version + 1;
+		data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -1780,9 +1803,12 @@ static int afs_symlink(struct inode *dir
 		goto error_key;
 	}
 
-	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+	down_write(&dvnode->validate_lock);
+	if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+	    dvnode->status.data_version == data_version)
 		afs_edit_dir_add(dvnode, &dentry->d_name, &iget_data.fid,
 				 afs_edit_dir_for_symlink);
+	up_write(&dvnode->validate_lock);
 
 	key_put(key);
 	kfree(scb);
@@ -1812,6 +1838,8 @@ static int afs_rename(struct inode *old_
 	struct dentry *tmp = NULL, *rehash = NULL;
 	struct inode *new_inode;
 	struct key *key;
+	afs_dataversion_t orig_data_version;
+	afs_dataversion_t new_data_version;
 	bool new_negative = d_is_negative(new_dentry);
 	int ret;
 
@@ -1890,9 +1918,6 @@ static int afs_rename(struct inode *old_
 
 	ret = -ERESTARTSYS;
 	if (afs_begin_vnode_operation(&fc, orig_dvnode, key, true)) {
-		afs_dataversion_t orig_data_version;
-		afs_dataversion_t new_data_version;
-
 		orig_data_version = orig_dvnode->status.data_version + 1;
 
 		if (orig_dvnode != new_dvnode) {
@@ -1928,18 +1953,25 @@ static int afs_rename(struct inode *old_
 	if (ret == 0) {
 		if (rehash)
 			d_rehash(rehash);
-		if (test_bit(AFS_VNODE_DIR_VALID, &orig_dvnode->flags))
-		    afs_edit_dir_remove(orig_dvnode, &old_dentry->d_name,
-					afs_edit_dir_for_rename_0);
-
-		if (!new_negative &&
-		    test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags))
-			afs_edit_dir_remove(new_dvnode, &new_dentry->d_name,
-					    afs_edit_dir_for_rename_1);
+		down_write(&orig_dvnode->validate_lock);
+		if (test_bit(AFS_VNODE_DIR_VALID, &orig_dvnode->flags) &&
+		    orig_dvnode->status.data_version == orig_data_version)
+			afs_edit_dir_remove(orig_dvnode, &old_dentry->d_name,
+					    afs_edit_dir_for_rename_0);
+		if (orig_dvnode != new_dvnode) {
+			up_write(&orig_dvnode->validate_lock);
+
+			down_write(&new_dvnode->validate_lock);
+		}
+		if (test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags) &&
+		    orig_dvnode->status.data_version == new_data_version) {
+			if (!new_negative)
+				afs_edit_dir_remove(new_dvnode, &new_dentry->d_name,
+						    afs_edit_dir_for_rename_1);
 
-		if (test_bit(AFS_VNODE_DIR_VALID, &new_dvnode->flags))
 			afs_edit_dir_add(new_dvnode, &new_dentry->d_name,
 					 &vnode->fid, afs_edit_dir_for_rename_2);
+		}
 
 		new_inode = d_inode(new_dentry);
 		if (new_inode) {
@@ -1958,6 +1990,7 @@ static int afs_rename(struct inode *old_
 		afs_update_dentry_version(&fc, old_dentry, &scb[1]);
 		afs_update_dentry_version(&fc, new_dentry, &scb[1]);
 		d_move(old_dentry, new_dentry);
+		up_write(&new_dvnode->validate_lock);
 		goto error_tmp;
 	}
 
--- a/fs/afs/dir_silly.c
+++ b/fs/afs/dir_silly.c
@@ -21,6 +21,7 @@ static int afs_do_silly_rename(struct af
 {
 	struct afs_fs_cursor fc;
 	struct afs_status_cb *scb;
+	afs_dataversion_t dir_data_version;
 	int ret = -ERESTARTSYS;
 
 	_enter("%pd,%pd", old, new);
@@ -31,7 +32,7 @@ static int afs_do_silly_rename(struct af
 
 	trace_afs_silly_rename(vnode, false);
 	if (afs_begin_vnode_operation(&fc, dvnode, key, true)) {
-		afs_dataversion_t dir_data_version = dvnode->status.data_version + 1;
+		dir_data_version = dvnode->status.data_version + 1;
 
 		while (afs_select_fileserver(&fc)) {
 			fc.cb_break = afs_calc_vnode_cb_break(dvnode);
@@ -54,12 +55,15 @@ static int afs_do_silly_rename(struct af
 			dvnode->silly_key = key_get(key);
 		}
 
-		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
+		down_write(&dvnode->validate_lock);
+		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+		    dvnode->status.data_version == dir_data_version) {
 			afs_edit_dir_remove(dvnode, &old->d_name,
 					    afs_edit_dir_for_silly_0);
-		if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
 			afs_edit_dir_add(dvnode, &new->d_name,
 					 &vnode->fid, afs_edit_dir_for_silly_1);
+		}
+		up_write(&dvnode->validate_lock);
 	}
 
 	kfree(scb);
@@ -181,10 +185,14 @@ static int afs_do_silly_unlink(struct af
 				clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags);
 			}
 		}
-		if (ret == 0 &&
-		    test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags))
-			afs_edit_dir_remove(dvnode, &dentry->d_name,
-					    afs_edit_dir_for_unlink);
+		if (ret == 0) {
+			down_write(&dvnode->validate_lock);
+			if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) &&
+			    dvnode->status.data_version == dir_data_version)
+				afs_edit_dir_remove(dvnode, &dentry->d_name,
+						    afs_edit_dir_for_unlink);
+			up_write(&dvnode->validate_lock);
+		}
 	}
 
 	kfree(scb);

[PATCH 5.4 029/118] block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroup

[Greg Kroah-Hartman]

From: Paolo Valente <paolo.valente@linaro.org>

commit c8997736650060594845e42c5d01d3118aec8d25 upstream.

A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The
goal of this put is to release a process reference to a bfq_queue. But
process-reference releases may trigger also some extra operation, and,
to this goal, are handled through bfq_release_process_ref(). So, turn
the invocation of bfq_put_queue() into an invocation of
bfq_release_process_ref().

Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/bfq-cgroup.c  |    5 +----
 block/bfq-iosched.c |    2 --
 block/bfq-iosched.h |    1 +
 3 files changed, 2 insertions(+), 6 deletions(-)

--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -697,10 +697,7 @@ static struct bfq_group *__bfq_bic_chang
 
 		if (entity->sched_data != &bfqg->sched_data) {
 			bic_set_bfqq(bic, NULL, 0);
-			bfq_log_bfqq(bfqd, async_bfqq,
-				     "bic_change_group: %p %d",
-				     async_bfqq, async_bfqq->ref);
-			bfq_put_queue(async_bfqq);
+			bfq_release_process_ref(bfqd, async_bfqq);
 		}
 	}
 
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2717,8 +2717,6 @@ static void bfq_bfqq_save_state(struct b
 	}
 }
 
-
-static
 void bfq_release_process_ref(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 {
 	/*
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -950,6 +950,7 @@ void bfq_bfqq_expire(struct bfq_data *bf
 		     bool compensate, enum bfqq_expiration reason);
 void bfq_put_queue(struct bfq_queue *bfqq);
 void bfq_end_wr_async_queues(struct bfq_data *bfqd, struct bfq_group *bfqg);
+void bfq_release_process_ref(struct bfq_data *bfqd, struct bfq_queue *bfqq);
 void bfq_schedule_dispatch(struct bfq_data *bfqd);
 void bfq_put_async_queues(struct bfq_data *bfqd, struct bfq_group *bfqg);
 

[PATCH 5.4 030/118] block, bfq: make reparent_leaf_entity actually work only on leaf entities

[Greg Kroah-Hartman]

From: Paolo Valente <paolo.valente@linaro.org>

commit 576682fa52cbd95deb3773449566274f206acc58 upstream.

bfq_reparent_leaf_entity() reparents the input leaf entity (a leaf
entity represents just a bfq_queue in an entity tree). Yet, the input
entity is guaranteed to always be a leaf entity only in two-level
entity trees. In this respect, because of the error fixed by
commit 14afc5936197 ("block, bfq: fix overwrite of bfq_group pointer
in bfq_find_set_group()"), all (wrongly collapsed) entity trees happened
to actually have only two levels. After the latter commit, this does not
hold any longer.

This commit fixes this problem by modifying
bfq_reparent_leaf_entity(), so that it searches an active leaf entity
down the path that stems from the input entity. Such a leaf entity is
guaranteed to exist when bfq_reparent_leaf_entity() is invoked.

Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/bfq-cgroup.c |   48 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 17 deletions(-)

--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -798,39 +798,53 @@ static void bfq_flush_idle_tree(struct b
 /**
  * bfq_reparent_leaf_entity - move leaf entity to the root_group.
  * @bfqd: the device data structure with the root group.
- * @entity: the entity to move.
+ * @entity: the entity to move, if entity is a leaf; or the parent entity
+ *	    of an active leaf entity to move, if entity is not a leaf.
  */
 static void bfq_reparent_leaf_entity(struct bfq_data *bfqd,
-				     struct bfq_entity *entity)
+				     struct bfq_entity *entity,
+				     int ioprio_class)
 {
-	struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+	struct bfq_queue *bfqq;
+	struct bfq_entity *child_entity = entity;
 
+	while (child_entity->my_sched_data) { /* leaf not reached yet */
+		struct bfq_sched_data *child_sd = child_entity->my_sched_data;
+		struct bfq_service_tree *child_st = child_sd->service_tree +
+			ioprio_class;
+		struct rb_root *child_active = &child_st->active;
+
+		child_entity = bfq_entity_of(rb_first(child_active));
+
+		if (!child_entity)
+			child_entity = child_sd->in_service_entity;
+	}
+
+	bfqq = bfq_entity_to_bfqq(child_entity);
 	bfq_bfqq_move(bfqd, bfqq, bfqd->root_group);
 }
 
 /**
- * bfq_reparent_active_entities - move to the root group all active
- *                                entities.
+ * bfq_reparent_active_queues - move to the root group all active queues.
  * @bfqd: the device data structure with the root group.
  * @bfqg: the group to move from.
- * @st: the service tree with the entities.
+ * @st: the service tree to start the search from.
  */
-static void bfq_reparent_active_entities(struct bfq_data *bfqd,
-					 struct bfq_group *bfqg,
-					 struct bfq_service_tree *st)
+static void bfq_reparent_active_queues(struct bfq_data *bfqd,
+				       struct bfq_group *bfqg,
+				       struct bfq_service_tree *st,
+				       int ioprio_class)
 {
 	struct rb_root *active = &st->active;
-	struct bfq_entity *entity = NULL;
-
-	if (!RB_EMPTY_ROOT(&st->active))
-		entity = bfq_entity_of(rb_first(active));
+	struct bfq_entity *entity;
 
-	for (; entity ; entity = bfq_entity_of(rb_first(active)))
-		bfq_reparent_leaf_entity(bfqd, entity);
+	while ((entity = bfq_entity_of(rb_first(active))))
+		bfq_reparent_leaf_entity(bfqd, entity, ioprio_class);
 
 	if (bfqg->sched_data.in_service_entity)
 		bfq_reparent_leaf_entity(bfqd,
-			bfqg->sched_data.in_service_entity);
+					 bfqg->sched_data.in_service_entity,
+					 ioprio_class);
 }
 
 /**
@@ -881,7 +895,7 @@ static void bfq_pd_offline(struct blkg_p
 		 * There is no need to put the sync queues, as the
 		 * scheduler has taken no reference.
 		 */
-		bfq_reparent_active_entities(bfqd, bfqg, st);
+		bfq_reparent_active_queues(bfqd, bfqg, st, i);
 	}
 
 	__bfq_deactivate_entity(entity, false);

[PATCH 5.4 031/118] block, bfq: invoke flush_idle_tree after reparent_active_queues in pd_offline

[Greg Kroah-Hartman]

From: Paolo Valente <paolo.valente@linaro.org>

commit 4d38a87fbb77fb9ff2ff4e914162a8ae6453eff5 upstream.

In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to
flush the rb tree that contains all idle entities belonging to the pd
(cgroup) being destroyed. In particular, bfq_flush_idle_tree() is
invoked before bfq_reparent_active_queues(). Yet the latter may happen
to add some entities to the idle tree. It happens if, in some of the
calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(),
the queue to move is empty and gets expired.

This commit simply reverses the invocation order between
bfq_flush_idle_tree() and bfq_reparent_active_queues().

Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/bfq-cgroup.c |   20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -877,13 +877,6 @@ static void bfq_pd_offline(struct blkg_p
 		st = bfqg->sched_data.service_tree + i;
 
 		/*
-		 * The idle tree may still contain bfq_queues belonging
-		 * to exited task because they never migrated to a different
-		 * cgroup from the one being destroyed now.
-		 */
-		bfq_flush_idle_tree(st);
-
-		/*
 		 * It may happen that some queues are still active
 		 * (busy) upon group destruction (if the corresponding
 		 * processes have been forced to terminate). We move
@@ -896,6 +889,19 @@ static void bfq_pd_offline(struct blkg_p
 		 * scheduler has taken no reference.
 		 */
 		bfq_reparent_active_queues(bfqd, bfqg, st, i);
+
+		/*
+		 * The idle tree may still contain bfq_queues
+		 * belonging to exited task because they never
+		 * migrated to a different cgroup from the one being
+		 * destroyed now. In addition, even
+		 * bfq_reparent_active_queues() may happen to add some
+		 * entities to the idle tree. It happens if, in some
+		 * of the calls to bfq_bfqq_move() performed by
+		 * bfq_reparent_active_queues(), the queue to move is
+		 * empty and gets expired.
+		 */
+		bfq_flush_idle_tree(st);
 	}
 
 	__bfq_deactivate_entity(entity, false);

[PATCH 5.4 032/118] rbd: avoid a deadlock on header_rwsem when flushing notifies

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

[ Upstream commit 0e4e1de5b63fa423b13593337a27fd2d2b0bcf77 ]

rbd_unregister_watch() flushes notifies and therefore cannot be called
under header_rwsem because a header update notify takes header_rwsem to
synchronize with "rbd map".  If mapping an image fails after the watch
is established and a header update notify sneaks in, we deadlock when
erroring out from rbd_dev_image_probe().

Move watch registration and unregistration out of the critical section.
The only reason they were put there was to make header_rwsem management
slightly more obvious.

Fixes: 811c66887746 ("rbd: fix rbd map vs notify races")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/rbd.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index a67315786db47..bab9c546ba334 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -4636,6 +4636,10 @@ static void cancel_tasks_sync(struct rbd_device *rbd_dev)
 	cancel_work_sync(&rbd_dev->unlock_work);
 }
 
+/*
+ * header_rwsem must not be held to avoid a deadlock with
+ * rbd_dev_refresh() when flushing notifies.
+ */
 static void rbd_unregister_watch(struct rbd_device *rbd_dev)
 {
 	cancel_tasks_sync(rbd_dev);
@@ -6942,6 +6946,9 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev)
  * device.  If this image is the one being mapped (i.e., not a
  * parent), initiate a watch on its header object before using that
  * object to get detailed information about the rbd image.
+ *
+ * On success, returns with header_rwsem held for write if called
+ * with @depth == 0.
  */
 static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 {
@@ -6974,6 +6981,9 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 		}
 	}
 
+	if (!depth)
+		down_write(&rbd_dev->header_rwsem);
+
 	ret = rbd_dev_header_info(rbd_dev);
 	if (ret)
 		goto err_out_watch;
@@ -7027,6 +7037,8 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 err_out_probe:
 	rbd_dev_unprobe(rbd_dev);
 err_out_watch:
+	if (!depth)
+		up_write(&rbd_dev->header_rwsem);
 	if (!depth)
 		rbd_unregister_watch(rbd_dev);
 err_out_format:
@@ -7085,12 +7097,9 @@ static ssize_t do_rbd_add(struct bus_type *bus,
 		goto err_out_rbd_dev;
 	}
 
-	down_write(&rbd_dev->header_rwsem);
 	rc = rbd_dev_image_probe(rbd_dev, 0);
-	if (rc < 0) {
-		up_write(&rbd_dev->header_rwsem);
+	if (rc < 0)
 		goto err_out_rbd_dev;
-	}
 
 	/* If we are mapping a snapshot it must be marked read-only */
 	if (rbd_dev->spec->snap_id != CEPH_NOSNAP)
-- 
2.20.1

[PATCH 5.4 033/118] rbd: call rbd_dev_unprobe() after unwatching and flushing notifies

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

[ Upstream commit 952c48b0ed18919bff7528501e9a3fff8a24f8cd ]

rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(),
including rbd_dev_header_info(), which means that rbd_dev_header_info()
isn't supposed to be called after rbd_dev_unprobe().

However, rbd_dev_image_release() calls rbd_dev_unprobe() before
rbd_unregister_watch().  This is racy because a header update notify
can sneak in:

  "rbd unmap" thread                   ceph-watch-notify worker

  rbd_dev_image_release()
    rbd_dev_unprobe()
      free and zero out header
                                       rbd_watch_cb()
                                         rbd_dev_refresh()
                                           rbd_dev_header_info()
                                             read in header

The same goes for "rbd map" because rbd_dev_image_probe() calls
rbd_dev_unprobe() on errors.  In both cases this results in a memory
leak.

Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/rbd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index bab9c546ba334..274beda31c356 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -6933,9 +6933,10 @@ static int rbd_dev_header_name(struct rbd_device *rbd_dev)
 
 static void rbd_dev_image_release(struct rbd_device *rbd_dev)
 {
-	rbd_dev_unprobe(rbd_dev);
 	if (rbd_dev->opts)
 		rbd_unregister_watch(rbd_dev);
+
+	rbd_dev_unprobe(rbd_dev);
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
 	rbd_dev->spec->image_id = NULL;
@@ -6986,7 +6987,7 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 
 	ret = rbd_dev_header_info(rbd_dev);
 	if (ret)
-		goto err_out_watch;
+		goto err_out_probe;
 
 	/*
 	 * If this image is the one being mapped, we have pool name and
@@ -7035,12 +7036,11 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 	return 0;
 
 err_out_probe:
-	rbd_dev_unprobe(rbd_dev);
-err_out_watch:
 	if (!depth)
 		up_write(&rbd_dev->header_rwsem);
 	if (!depth)
 		rbd_unregister_watch(rbd_dev);
+	rbd_dev_unprobe(rbd_dev);
 err_out_format:
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
-- 
2.20.1

[PATCH 5.4 034/118] x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

[ Upstream commit 7f11a2cc10a4ae3a70e2c73361f4a9a33503539b ]

If kmsg_dump_register() fails, hv_panic_page will not be used
anywhere.  So free and reset it.

Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/20200406155331.2105-3-Tianyu.Lan@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/vmbus_drv.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 593107c20e977..40f6b73dae940 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1401,9 +1401,13 @@ static int vmbus_bus_init(void)
 			hv_panic_page = (void *)get_zeroed_page(GFP_KERNEL);
 			if (hv_panic_page) {
 				ret = kmsg_dump_register(&hv_kmsg_dumper);
-				if (ret)
+				if (ret) {
 					pr_err("Hyper-V: kmsg dump register "
 						"error 0x%x\n", ret);
+					hv_free_hyperv_page(
+					    (unsigned long)hv_panic_page);
+					hv_panic_page = NULL;
+				}
 			} else
 				pr_err("Hyper-V: panic message page memory "
 					"allocation failed");
@@ -1433,7 +1437,6 @@ static int vmbus_bus_init(void)
 	hv_remove_vmbus_irq();
 
 	bus_unregister(&hv_bus);
-	free_page((unsigned long)hv_panic_page);
 	unregister_sysctl_table(hv_ctl_table_hdr);
 	hv_ctl_table_hdr = NULL;
 	return ret;
-- 
2.20.1

[PATCH 5.4 035/118] drm/ttm: flush the fence on the bo after we individualize the reservation object

[Greg Kroah-Hartman]

From: xinhui pan <xinhui.pan@amd.com>

[ Upstream commit 1bbcf69e42fe7fd49b6f4339c970729d0e343753 ]

As we move the ttm_bo_individualize_resv() upwards, we need flush the
copied fence too. Otherwise the driver keeps waiting for fence.

run&Kill kfdtest, then perf top.

  25.53%  [ttm]                     [k] ttm_bo_delayed_delete
  24.29%  [kernel]                  [k] dma_resv_test_signaled_rcu
  19.72%  [kernel]                  [k] ww_mutex_lock

Fix: 378e2d5b("drm/ttm: fix ttm_bo_cleanup_refs_or_queue once more")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/72339/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index f078036998092..abf165b2f64fc 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -517,8 +517,10 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
 
 		dma_resv_unlock(bo->base.resv);
 	}
-	if (bo->base.resv != &bo->base._resv)
+	if (bo->base.resv != &bo->base._resv) {
+		ttm_bo_flush_all_fences(bo);
 		dma_resv_unlock(&bo->base._resv);
+	}
 
 error:
 	kref_get(&bo->list_kref);
-- 
2.20.1

[PATCH 5.4 036/118] clk: Dont cache errors from clk_ops::get_phase()

[Greg Kroah-Hartman]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit f21cf9c77ee82ef8adfeb2143adfacf21ec1d5cc ]

We don't check for errors from clk_ops::get_phase() before storing away
the result into the clk_core::phase member. This can lead to some fairly
confusing debugfs information if these ops do return an error. Let's
skip the store when this op fails to fix this. While we're here, move
the locking outside of clk_core_get_phase() to simplify callers from
the debugfs side.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-2-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 48 +++++++++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 62d0fc486d3a2..80b029713722b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2642,12 +2642,14 @@ static int clk_core_get_phase(struct clk_core *core)
 {
 	int ret;
 
-	clk_prepare_lock();
+	lockdep_assert_held(&prepare_lock);
+	if (!core->ops->get_phase)
+		return 0;
+
 	/* Always try to update cached phase if possible */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	ret = core->phase;
-	clk_prepare_unlock();
+	ret = core->ops->get_phase(core->hw);
+	if (ret >= 0)
+		core->phase = ret;
 
 	return ret;
 }
@@ -2661,10 +2663,16 @@ static int clk_core_get_phase(struct clk_core *core)
  */
 int clk_get_phase(struct clk *clk)
 {
+	int ret;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_phase(clk->core);
+	clk_prepare_lock();
+	ret = clk_core_get_phase(clk->core);
+	clk_prepare_unlock();
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_get_phase);
 
@@ -2878,13 +2886,21 @@ static struct hlist_head *orphan_list[] = {
 static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 				 int level)
 {
-	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
+	int phase;
+
+	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
-		   clk_core_get_rate(c), clk_core_get_accuracy(c),
-		   clk_core_get_phase(c),
-		   clk_core_get_scaled_duty_cycle(c, 100000));
+		   clk_core_get_rate(c), clk_core_get_accuracy(c));
+
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "%5d", phase);
+	else
+		seq_puts(s, "-----");
+
+	seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000));
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2921,6 +2937,7 @@ DEFINE_SHOW_ATTRIBUTE(clk_summary);
 
 static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 {
+	int phase;
 	unsigned long min_rate, max_rate;
 
 	clk_core_get_boundaries(c, &min_rate, &max_rate);
@@ -2934,7 +2951,9 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 	seq_printf(s, "\"min_rate\": %lu,", min_rate);
 	seq_printf(s, "\"max_rate\": %lu,", max_rate);
 	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
-	seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c));
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "\"phase\": %d,", phase);
 	seq_printf(s, "\"duty_cycle\": %u",
 		   clk_core_get_scaled_duty_cycle(c, 100000));
 }
@@ -3375,14 +3394,11 @@ static int __clk_core_init(struct clk_core *core)
 		core->accuracy = 0;
 
 	/*
-	 * Set clk's phase.
+	 * Set clk's phase by clk_core_get_phase() caching the phase.
 	 * Since a phase is by definition relative to its parent, just
 	 * query the current clock phase, or just assume it's in phase.
 	 */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	else
-		core->phase = 0;
+	clk_core_get_phase(core);
 
 	/*
 	 * Set clk's duty cycle.
-- 
2.20.1

[PATCH 5.4 037/118] clk: at91: usb: continue if clk_hw_round_rate() return zero

[Greg Kroah-Hartman]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

[ Upstream commit b0ecf1c6c6e82da4847900fad0272abfd014666d ]

clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-usb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index bda92980e0155..c0895c993cce2 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -75,6 +75,9 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
 			tmp_parent_rate = req->rate * div;
 			tmp_parent_rate = clk_hw_round_rate(parent,
 							   tmp_parent_rate);
+			if (!tmp_parent_rate)
+				continue;
+
 			tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div);
 			if (tmp_rate < req->rate)
 				tmp_diff = req->rate - tmp_rate;
-- 
2.20.1

[PATCH 5.4 038/118] net/mlx5e: Enforce setting of a single FEC mode

[Greg Kroah-Hartman]

From: Aya Levin <ayal@mellanox.com>

[ Upstream commit 4bd9d5070b92da012f2715cf8e4859acb78b8f35 ]

Ethtool command allow setting of several FEC modes in a single set
command. The driver can only set a single FEC mode at a time. With this
patch driver will reply not-supported on setting several FEC modes.

Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 304ddce6b0872..39ee32518b106 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1548,6 +1548,10 @@ static int mlx5e_set_fecparam(struct net_device *netdev,
 	int mode;
 	int err;
 
+	if (bitmap_weight((unsigned long *)&fecparam->fec,
+			  ETHTOOL_FEC_BASER_BIT + 1) > 1)
+		return -EOPNOTSUPP;
+
 	for (mode = 0; mode < ARRAY_SIZE(pplm_fec_2_ethtool); mode++) {
 		if (!(pplm_fec_2_ethtool[mode] & fecparam->fec))
 			continue;
-- 
2.20.1

[PATCH 5.4 039/118] f2fs: fix the panic in do_checkpoint()

[Greg Kroah-Hartman]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit bf22c3cc8ce71454dddd772284773306a68031d8 ]

There could be a scenario where f2fs_sync_meta_pages() will not
ensure that all F2FS_DIRTY_META pages are submitted for IO. Thus,
resulting in the below panic in do_checkpoint() -

f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
				!f2fs_cp_error(sbi));

This can happen in a low-memory condition, where shrinker could
also be doing the writepage operation (stack shown below)
at the same time when checkpoint is running on another core.

schedule
down_write
f2fs_submit_page_write -> by this time, this page in page cache is tagged
			as PAGECACHE_TAG_WRITEBACK and PAGECACHE_TAG_DIRTY
			is cleared, due to which f2fs_sync_meta_pages()
			cannot sync this page in do_checkpoint() path.
f2fs_do_write_meta_page
__f2fs_write_meta_page
f2fs_write_meta_page
shrink_page_list
shrink_inactive_list
shrink_node_memcg
shrink_node
kswapd

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c | 16 +++++++---------
 fs/f2fs/f2fs.h       |  2 +-
 fs/f2fs/super.c      |  2 +-
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index a0eef95b9e0ed..410f5c2c6ef17 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1250,20 +1250,20 @@ static void unblock_operations(struct f2fs_sb_info *sbi)
 	f2fs_unlock_all(sbi);
 }
 
-void f2fs_wait_on_all_pages_writeback(struct f2fs_sb_info *sbi)
+void f2fs_wait_on_all_pages(struct f2fs_sb_info *sbi, int type)
 {
 	DEFINE_WAIT(wait);
 
 	for (;;) {
 		prepare_to_wait(&sbi->cp_wait, &wait, TASK_UNINTERRUPTIBLE);
 
-		if (!get_pages(sbi, F2FS_WB_CP_DATA))
+		if (!get_pages(sbi, type))
 			break;
 
 		if (unlikely(f2fs_cp_error(sbi)))
 			break;
 
-		io_schedule_timeout(5*HZ);
+		io_schedule_timeout(HZ/50);
 	}
 	finish_wait(&sbi->cp_wait, &wait);
 }
@@ -1384,8 +1384,6 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	/* Flush all the NAT/SIT pages */
 	f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_CP_META_IO);
-	f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
-					!f2fs_cp_error(sbi));
 
 	/*
 	 * modify checkpoint
@@ -1493,11 +1491,11 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	/* Here, we have one bio having CP pack except cp pack 2 page */
 	f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_CP_META_IO);
-	f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
-					!f2fs_cp_error(sbi));
+	/* Wait for all dirty meta pages to be submitted for IO */
+	f2fs_wait_on_all_pages(sbi, F2FS_DIRTY_META);
 
 	/* wait for previous submitted meta pages writeback */
-	f2fs_wait_on_all_pages_writeback(sbi);
+	f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
 
 	/* flush all device cache */
 	err = f2fs_flush_device_cache(sbi);
@@ -1506,7 +1504,7 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 
 	/* barrier and flush checkpoint cp pack 2 page if it can */
 	commit_checkpoint(sbi, ckpt, start_blk);
-	f2fs_wait_on_all_pages_writeback(sbi);
+	f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
 
 	/*
 	 * invalidate intermediate page cache borrowed from meta inode
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 9046432b87c2d..1a8b68ceaa62f 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3185,7 +3185,7 @@ int f2fs_get_valid_checkpoint(struct f2fs_sb_info *sbi);
 void f2fs_update_dirty_page(struct inode *inode, struct page *page);
 void f2fs_remove_dirty_inode(struct inode *inode);
 int f2fs_sync_dirty_inodes(struct f2fs_sb_info *sbi, enum inode_type type);
-void f2fs_wait_on_all_pages_writeback(struct f2fs_sb_info *sbi);
+void f2fs_wait_on_all_pages(struct f2fs_sb_info *sbi, int type);
 int f2fs_write_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc);
 void f2fs_init_ino_entry_info(struct f2fs_sb_info *sbi);
 int __init f2fs_create_checkpoint_caches(void);
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index ea8dbf1458c99..28441f4971b8d 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1105,7 +1105,7 @@ static void f2fs_put_super(struct super_block *sb)
 	/* our cp_error case, we can wait for any writeback page */
 	f2fs_flush_merged_writes(sbi);
 
-	f2fs_wait_on_all_pages_writeback(sbi);
+	f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA);
 
 	f2fs_bug_on(sbi, sbi->fsync_node_num);
 
-- 
2.20.1

[PATCH 5.4 040/118] ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc

[Greg Kroah-Hartman]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 9cd568dc588c5d168615bf34f325fabe33b2c9a0 ]

A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
  - $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
  - $ref: "mmc-controller.yaml#"

'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.

First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: mmc@10218000:
'vmmcq-supply' does not match any of the regexes:
'^.*@[0-9]+$',
'^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$',
'pinctrl-[0-9]+'

'vmmcq-supply' is not a valid property name for mmc nodes.
Fix this error by renaming it to 'vqmmc-supply'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200307134841.13803-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-bqedison2qc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index ad1afd403052a..8afb2fd5d9f1b 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -465,7 +465,7 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
-	vmmcq-supply = <&vccio_wl>;
+	vqmmc-supply = <&vccio_wl>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.20.1

[PATCH 5.4 041/118] arm64: dts: allwinner: a64: Fix display clock register range

[Greg Kroah-Hartman]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit 3e9a1a8b7f811de3eb1445d72f68766b704ad17c ]

Register range of display clocks is 0x10000, as it can be seen from
DE2 documentation.

Fix it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 2c796fc8f5dbd ("arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU")
[wens@csie.org: added fixes tag]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index ba41c1b85887a..367699c8c9028 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -227,7 +227,7 @@
 
 			display_clocks: clock@0 {
 				compatible = "allwinner,sun50i-a64-de2-clk";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x10000>;
 				clocks = <&ccu CLK_BUS_DE>,
 					 <&ccu CLK_DE>;
 				clock-names = "bus",
-- 
2.20.1

[PATCH 5.4 042/118] power: supply: bq27xxx_battery: Silence deferred-probe error

[Greg Kroah-Hartman]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ]

The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/bq27xxx_battery.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 195c18c2f426e..664e50103eaaf 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1885,7 +1885,10 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 
 	di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
 	if (IS_ERR(di->bat)) {
-		dev_err(di->dev, "failed to register battery\n");
+		if (PTR_ERR(di->bat) == -EPROBE_DEFER)
+			dev_dbg(di->dev, "failed to register battery, deferring probe\n");
+		else
+			dev_err(di->dev, "failed to register battery\n");
 		return PTR_ERR(di->bat);
 	}
 
-- 
2.20.1

[PATCH 5.4 043/118] clk: tegra: Fix Tegra PMC clock out parents

[Greg Kroah-Hartman]

From: Sowjanya Komatineni <skomatineni@nvidia.com>

[ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ]

Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents
are osc, osc_div2, osc_div4 and extern clock.

Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4
for PMC clocks.

This patch fixes this.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/tegra/clk-tegra-pmc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
index bec3e008335f3..5e044ba1ae364 100644
--- a/drivers/clk/tegra/clk-tegra-pmc.c
+++ b/drivers/clk/tegra/clk-tegra-pmc.c
@@ -49,16 +49,16 @@ struct pmc_clk_init_data {
 
 static DEFINE_SPINLOCK(clk_out_lock);
 
-static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern1",
+static const char *clk_out1_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern1",
 };
 
-static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern2",
+static const char *clk_out2_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern2",
 };
 
-static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern3",
+static const char *clk_out3_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern3",
 };
 
 static struct pmc_clk_init_data pmc_clks[] = {
-- 
2.20.1

[PATCH 5.4 044/118] arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194

[Greg Kroah-Hartman]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit 0c988b731e6430f0081991fdb4f63f7fc837df9a ]

Add endpoint mode controllers nodes for the dual mode PCIe controllers
present in Tegra194 SoC.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 99 ++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 3c0cf54f0aab3..57adcbb7352d6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1430,6 +1430,105 @@
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
+	pcie_ep@14160000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <4>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 4>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@14180000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 0>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
+	pcie_ep@141a0000 {
+		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
+		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
+		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
+		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+		status = "disabled";
+
+		num-lanes = <8>;
+		num-ib-windows = <2>;
+		num-ob-windows = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+		clock-names = "core";
+
+		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+		reset-names = "apb", "core";
+
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+		interrupt-names = "intr";
+
+		nvidia,bpmp = <&bpmp 5>;
+
+		nvidia,aspm-cmrt-us = <60>;
+		nvidia,aspm-pwr-on-t-us = <20>;
+		nvidia,aspm-l0s-entrance-latency-us = <3>;
+	};
+
 	sysram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
-- 
2.20.1

[PATCH 5.4 045/118] arm64: tegra: Fix Tegra194 PCIe compatible string

[Greg Kroah-Hartman]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ]

If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled
then this can cause the kernel to incorrectly probe the generic
designware PCIe platform driver instead of the Tegra194 designware PCIe
driver. This causes a boot failure on Tegra194 because the necessary
configuration to access the hardware is not performed.

The order in which the compatible strings are populated in Device-Tree
is not relevant in this case, because the kernel will attempt to probe
the device as soon as a driver is loaded and if the generic designware
PCIe driver is loaded first, then this driver will be probed first.
Therefore, to fix this problem, remove the "snps,dw-pcie" string from
the compatible string as we never want this driver to be probe on
Tegra194.

Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/pci/nvidia,tegra194-pcie.txt |  2 +-
 arch/arm64/boot/dts/nvidia/tegra194.dtsi             | 12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
index b739f92da58e5..1f90eb39870be 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -118,7 +118,7 @@ Tegra194:
 --------
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 57adcbb7352d6..457b815d57f40 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1151,7 +1151,7 @@
 	};
 
 	pcie@14100000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1197,7 +1197,7 @@
 	};
 
 	pcie@14120000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1243,7 +1243,7 @@
 	};
 
 	pcie@14140000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
 		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1289,7 +1289,7 @@
 	};
 
 	pcie@14160000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
 		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1335,7 +1335,7 @@
 	};
 
 	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
 		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
@@ -1381,7 +1381,7 @@
 	};
 
 	pcie@141a0000 {
-		compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
 		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
 		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
-- 
2.20.1

[PATCH 5.4 046/118] arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 46f94c7818e7ab82758fca74935ef3d454340b4e ]

If the mv88e6xxx DSA driver is built as a module, it causes the
ethernet driver to re-probe when it's loaded. This in turn causes
the gigabit PHY to be momentarily reset and reprogrammed. However,
we attempt to reprogram the PHY immediately after deasserting reset,
and the PHY ignores the writes.

This results in the PHY operating in the wrong mode, and the copper
link states down.

Set a reset deassert delay of 10ms for the gigabit PHY to avoid this.

Fixes: babc5544c293 ("arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index a211a046b2f2f..b90d78a5724b2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -367,6 +367,7 @@
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
 	};
 
 	switch0: switch0@4 {
-- 
2.20.1

[PATCH 5.4 047/118] soc: imx: gpc: fix power up sequencing

[Greg Kroah-Hartman]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ]

Currently we wait only until the PGC inverts the isolation setting
before disabling the peripheral clocks. This doesn't ensure that the
reset is properly propagated through the peripheral devices in the
power domain.

Wait until the PGC signals that the power up request is done and
wait a bit for resets to propagate before disabling the clocks.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/imx/gpc.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index 98b9d9a902ae3..90a8b2c0676ff 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -87,8 +87,8 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
 static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
 {
 	struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
-	int i, ret, sw, sw2iso;
-	u32 val;
+	int i, ret;
+	u32 val, req;
 
 	if (pd->supply) {
 		ret = regulator_enable(pd->supply);
@@ -107,17 +107,18 @@ static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
 	regmap_update_bits(pd->regmap, pd->reg_offs + GPC_PGC_CTRL_OFFS,
 			   0x1, 0x1);
 
-	/* Read ISO and ISO2SW power up delays */
-	regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
-	sw = val & 0x3f;
-	sw2iso = (val >> 8) & 0x3f;
-
 	/* Request GPC to power up domain */
-	val = BIT(pd->cntr_pdn_bit + 1);
-	regmap_update_bits(pd->regmap, GPC_CNTR, val, val);
+	req = BIT(pd->cntr_pdn_bit + 1);
+	regmap_update_bits(pd->regmap, GPC_CNTR, req, req);
 
-	/* Wait ISO + ISO2SW IPG clock cycles */
-	udelay(DIV_ROUND_UP(sw + sw2iso, pd->ipg_rate_mhz));
+	/* Wait for the PGC to handle the request */
+	ret = regmap_read_poll_timeout(pd->regmap, GPC_CNTR, val, !(val & req),
+				       1, 50);
+	if (ret)
+		pr_err("powerup request on domain %s timed out\n", genpd->name);
+
+	/* Wait for reset to propagate through peripherals */
+	usleep_range(5, 10);
 
 	/* Disable reset clocks for all devices in the domain */
 	for (i = 0; i < pd->num_clks; i++)
@@ -343,6 +344,7 @@ static const struct regmap_config imx_gpc_regmap_config = {
 	.rd_table = &access_table,
 	.wr_table = &access_table,
 	.max_register = 0x2ac,
+	.fast_io = true,
 };
 
 static struct generic_pm_domain *imx_gpc_onecell_domains[] = {
-- 
2.20.1

[PATCH 5.4 048/118] dma-coherent: fix integer overflow in the reserved-memory dma allocation

[Greg Kroah-Hartman]

From: Kevin Grandemange <kevin.grandemange@allegrodvt.com>

[ Upstream commit 286c21de32b904131f8cf6a36ce40b8b0c9c5da3 ]

pageno is an int and the PAGE_SHIFT shift is done on an int,
overflowing if the memory is bigger than 2G

This can be reproduced using for example a reserved-memory of 4G

reserved-memory {
		    #address-cells = <2>;
		    #size-cells = <2>;
		    ranges;

		    reserved_dma: buffer@0 {
		        compatible = "shared-dma-pool";
		        no-map;
		        reg = <0x5 0x00000000 0x1 0x0>;
        };
};

Signed-off-by: Kevin Grandemange <kevin.grandemange@allegrodvt.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/coherent.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c
index 551b0eb7028a3..2a0c4985f38e4 100644
--- a/kernel/dma/coherent.c
+++ b/kernel/dma/coherent.c
@@ -134,7 +134,7 @@ static void *__dma_alloc_from_coherent(struct device *dev,
 
 	spin_lock_irqsave(&mem->spinlock, flags);
 
-	if (unlikely(size > (mem->size << PAGE_SHIFT)))
+	if (unlikely(size > ((dma_addr_t)mem->size << PAGE_SHIFT)))
 		goto err;
 
 	pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
@@ -144,8 +144,9 @@ static void *__dma_alloc_from_coherent(struct device *dev,
 	/*
 	 * Memory was found in the coherent area.
 	 */
-	*dma_handle = dma_get_device_base(dev, mem) + (pageno << PAGE_SHIFT);
-	ret = mem->virt_base + (pageno << PAGE_SHIFT);
+	*dma_handle = dma_get_device_base(dev, mem) +
+			((dma_addr_t)pageno << PAGE_SHIFT);
+	ret = mem->virt_base + ((dma_addr_t)pageno << PAGE_SHIFT);
 	spin_unlock_irqrestore(&mem->spinlock, flags);
 	memset(ret, 0, size);
 	return ret;
@@ -194,7 +195,7 @@ static int __dma_release_from_coherent(struct dma_coherent_mem *mem,
 				       int order, void *vaddr)
 {
 	if (mem && vaddr >= mem->virt_base && vaddr <
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		   (mem->virt_base + ((dma_addr_t)mem->size << PAGE_SHIFT))) {
 		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
 		unsigned long flags;
 
@@ -238,10 +239,10 @@ static int __dma_mmap_from_coherent(struct dma_coherent_mem *mem,
 		struct vm_area_struct *vma, void *vaddr, size_t size, int *ret)
 {
 	if (mem && vaddr >= mem->virt_base && vaddr + size <=
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		   (mem->virt_base + ((dma_addr_t)mem->size << PAGE_SHIFT))) {
 		unsigned long off = vma->vm_pgoff;
 		int start = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-		int user_count = vma_pages(vma);
+		unsigned long user_count = vma_pages(vma);
 		int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 
 		*ret = -ENXIO;
-- 
2.20.1

[PATCH 5.4 049/118] rtc: 88pm860x: fix possible race condition

[Greg Kroah-Hartman]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ]

The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.

To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.

Also remove the unnecessary error message as the core already prints the
info.

Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-88pm860x.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c
index 4743b16a8d849..1526402e126b2 100644
--- a/drivers/rtc/rtc-88pm860x.c
+++ b/drivers/rtc/rtc-88pm860x.c
@@ -336,6 +336,10 @@ static int pm860x_rtc_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 	dev_set_drvdata(&pdev->dev, info);
 
+	info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(info->rtc_dev))
+		return PTR_ERR(info->rtc_dev);
+
 	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
 					rtc_update_handler, IRQF_ONESHOT, "rtc",
 					info);
@@ -377,13 +381,11 @@ static int pm860x_rtc_probe(struct platform_device *pdev)
 		}
 	}
 
-	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "88pm860x-rtc",
-					    &pm860x_rtc_ops, THIS_MODULE);
-	ret = PTR_ERR(info->rtc_dev);
-	if (IS_ERR(info->rtc_dev)) {
-		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+	info->rtc_dev->ops = &pm860x_rtc_ops;
+
+	ret = rtc_register_device(info->rtc_dev);
+	if (ret)
 		return ret;
-	}
 
 	/*
 	 * enable internal XO instead of internal 3.25MHz clock since it can
-- 
2.20.1

[PATCH 5.4 050/118] NFS: alloc_nfs_open_context() must use the file cred when available

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 1d179d6bd67369a52edea8562154b31ee20be1cc ]

If we're creating a nfs_open_context() for a specific file pointer,
we must use the cred assigned to that file.

Fixes: a52458b48af1 ("NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/inode.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 2a03bfeec10a4..3802c88e83720 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -959,16 +959,16 @@ struct nfs_open_context *alloc_nfs_open_context(struct dentry *dentry,
 						struct file *filp)
 {
 	struct nfs_open_context *ctx;
-	const struct cred *cred = get_current_cred();
 
 	ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
-	if (!ctx) {
-		put_cred(cred);
+	if (!ctx)
 		return ERR_PTR(-ENOMEM);
-	}
 	nfs_sb_active(dentry->d_sb);
 	ctx->dentry = dget(dentry);
-	ctx->cred = cred;
+	if (filp)
+		ctx->cred = get_cred(filp->f_cred);
+	else
+		ctx->cred = get_current_cred();
 	ctx->ll_cred = NULL;
 	ctx->state = NULL;
 	ctx->mode = f_mode;
-- 
2.20.1

[PATCH 5.4 051/118] NFSv4/pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit d911c57a19551c6bef116a3b55c6b089901aacb0 ]

Make sure to test the stateid for validity so that we catch instances
where the server may have been reusing stateids in
nfs_layout_find_inode_by_stateid().

Fixes: 7b410d9ce460 ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/callback_proc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index f39924ba050b1..fc775b0b5194f 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -130,6 +130,8 @@ static struct inode *nfs_layout_find_inode_by_stateid(struct nfs_client *clp,
 
 	list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) {
 		list_for_each_entry(lo, &server->layouts, plh_layouts) {
+			if (!pnfs_layout_is_valid(lo))
+				continue;
 			if (stateid != NULL &&
 			    !nfs4_stateid_match_other(stateid, &lo->plh_stateid))
 				continue;
-- 
2.20.1

[PATCH 5.4 052/118] NFSv4.2: error out when relink swapfile

[Greg Kroah-Hartman]

From: Murphy Zhou <jencce.kernel@gmail.com>

[ Upstream commit f5fdf1243fb750598b46305dd03c553949cfa14f ]

This fixes xfstests generic/356 failure on NFSv4.2.

Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4file.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index 54f1c1f626fc5..fb55c04cdc6bd 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -210,6 +210,9 @@ static loff_t nfs42_remap_file_range(struct file *src_file, loff_t src_off,
 	if (remap_flags & ~REMAP_FILE_ADVISORY)
 		return -EINVAL;
 
+	if (IS_SWAPFILE(dst_inode) || IS_SWAPFILE(src_inode))
+		return -ETXTBSY;
+
 	/* check alignment w.r.t. clone_blksize */
 	ret = -EINVAL;
 	if (bs) {
-- 
2.20.1

[PATCH 5.4 053/118] ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc

[Greg Kroah-Hartman]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 1a7e99599dffd836fcb720cdc0eaf3cd43d7af4a ]

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder:
'ports' is a required property

Fix error by adding a ports wrapper for port@0 and port@1
inside the 'lvds-encoder' node for rk3188-bqedison2qc.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/
bridge/lvds-codec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-bqedison2qc.dts | 27 ++++++++++++++----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 8afb2fd5d9f1b..66a0ff196eb1f 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@
 
 	lvds-encoder {
 		compatible = "ti,sn75lvds83", "lvds-encoder";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			lvds_in_vop0: endpoint {
-				remote-endpoint = <&vop0_out_lvds>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
-			lvds_out_panel: endpoint {
-				remote-endpoint = <&panel_in_lvds>;
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
 			};
 		};
 	};
-- 
2.20.1

[PATCH 5.4 054/118] KVM: PPC: Book3S HV: Fix H_CEDE return code for nested guests

[Greg Kroah-Hartman]

From: Michael Roth <mdroth@linux.vnet.ibm.com>

[ Upstream commit 1f50cc1705350a4697923203fedd7d8fb1087fe2 ]

The h_cede_tm kvm-unit-test currently fails when run inside an L1 guest
via the guest/nested hypervisor.

  ./run-tests.sh -v
  ...
  TESTNAME=h_cede_tm TIMEOUT=90s ACCEL= ./powerpc/run powerpc/tm.elf -smp 2,threads=2 -machine cap-htm=on -append "h_cede_tm"
  FAIL h_cede_tm (2 tests, 1 unexpected failures)

While the test relates to transactional memory instructions, the actual
failure is due to the return code of the H_CEDE hypercall, which is
reported as 224 instead of 0. This happens even when no TM instructions
are issued.

224 is the value placed in r3 to execute a hypercall for H_CEDE, and r3
is where the caller expects the return code to be placed upon return.

In the case of guest running under a nested hypervisor, issuing H_CEDE
causes a return from H_ENTER_NESTED. In this case H_CEDE is
specially-handled immediately rather than later in
kvmppc_pseries_do_hcall() as with most other hcalls, but we forget to
set the return code for the caller, hence why kvm-unit-test sees the
224 return code and reports an error.

Guest kernels generally don't check the return value of H_CEDE, so
that likely explains why this hasn't caused issues outside of
kvm-unit-tests so far.

Fix this by setting r3 to 0 after we finish processing the H_CEDE.

RHBZ: 1778556

Fixes: 4bad77799fed ("KVM: PPC: Book3S HV: Handle hypercalls correctly when nested")
Cc: linuxppc-dev@ozlabs.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 36abbe3c346df..e2183fed947d4 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -3623,6 +3623,7 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit,
 		if (trap == BOOK3S_INTERRUPT_SYSCALL && !vcpu->arch.nested &&
 		    kvmppc_get_gpr(vcpu, 3) == H_CEDE) {
 			kvmppc_nested_cede(vcpu);
+			kvmppc_set_gpr(vcpu, 3, 0);
 			trap = 0;
 		}
 	} else {
-- 
2.20.1

[PATCH 5.4 055/118] f2fs: fix to show norecovery mount option

[Greg Kroah-Hartman]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit a9117eca1de6b738e713d2142126db2cfbf6fb36 ]

Previously, 'norecovery' mount option will be shown as
'disable_roll_forward', fix to show original option name correctly.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/f2fs.h  | 1 +
 fs/f2fs/super.c | 7 +++++--
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 1a8b68ceaa62f..3edde3d6d089d 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -100,6 +100,7 @@ extern const char *f2fs_fault_name[FAULT_MAX];
 #define F2FS_MOUNT_INLINE_XATTR_SIZE	0x00800000
 #define F2FS_MOUNT_RESERVE_ROOT		0x01000000
 #define F2FS_MOUNT_DISABLE_CHECKPOINT	0x02000000
+#define F2FS_MOUNT_NORECOVERY		0x04000000
 
 #define F2FS_OPTION(sbi)	((sbi)->mount_opt)
 #define clear_opt(sbi, option)	(F2FS_OPTION(sbi).opt &= ~F2FS_MOUNT_##option)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 28441f4971b8d..94caf26901e0b 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -439,7 +439,7 @@ static int parse_options(struct super_block *sb, char *options)
 			break;
 		case Opt_norecovery:
 			/* this option mounts f2fs with ro */
-			set_opt(sbi, DISABLE_ROLL_FORWARD);
+			set_opt(sbi, NORECOVERY);
 			if (!f2fs_readonly(sb))
 				return -EINVAL;
 			break;
@@ -1348,6 +1348,8 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
 	}
 	if (test_opt(sbi, DISABLE_ROLL_FORWARD))
 		seq_puts(seq, ",disable_roll_forward");
+	if (test_opt(sbi, NORECOVERY))
+		seq_puts(seq, ",norecovery");
 	if (test_opt(sbi, DISCARD))
 		seq_puts(seq, ",discard");
 	else
@@ -3488,7 +3490,8 @@ static int f2fs_fill_super(struct super_block *sb, void *data, int silent)
 		goto reset_checkpoint;
 
 	/* recover fsynced data */
-	if (!test_opt(sbi, DISABLE_ROLL_FORWARD)) {
+	if (!test_opt(sbi, DISABLE_ROLL_FORWARD) &&
+			!test_opt(sbi, NORECOVERY)) {
 		/*
 		 * mount should be failed, when device has readonly mode, and
 		 * previous checkpoint was not done by clean system shutdown.
-- 
2.20.1

[PATCH 5.4 056/118] phy: uniphier-usb3ss: Add Pro5 support

[Greg Kroah-Hartman]

From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

[ Upstream commit 9376fa634afc207a3ce99e0957e04948c34d6510 ]

Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is
equivalent to Pro4.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/socionext/phy-uniphier-usb3ss.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index ec231e40ef2ac..a7577e316baf5 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -314,6 +314,10 @@ static const struct of_device_id uniphier_u3ssphy_match[] = {
 		.compatible = "socionext,uniphier-pro4-usb3-ssphy",
 		.data = &uniphier_pro4_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pro5-usb3-ssphy",
+		.data = &uniphier_pro4_data,
+	},
 	{
 		.compatible = "socionext,uniphier-pxs2-usb3-ssphy",
 		.data = &uniphier_pxs2_data,
-- 
2.20.1

[PATCH 5.4 057/118] NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails

[Greg Kroah-Hartman]

From: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>

[ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ]

When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().

However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.

Fix this by adding the missing call.

Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/direct.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 29f00da8a0b7f..6b0bf4ebd8124 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -571,6 +571,7 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter)
 	l_ctx = nfs_get_lock_context(dreq->ctx);
 	if (IS_ERR(l_ctx)) {
 		result = PTR_ERR(l_ctx);
+		nfs_direct_req_release(dreq);
 		goto out_release;
 	}
 	dreq->l_ctx = l_ctx;
@@ -989,6 +990,7 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter)
 	l_ctx = nfs_get_lock_context(dreq->ctx);
 	if (IS_ERR(l_ctx)) {
 		result = PTR_ERR(l_ctx);
+		nfs_direct_req_release(dreq);
 		goto out_release;
 	}
 	dreq->l_ctx = l_ctx;
-- 
2.20.1

[PATCH 5.4 058/118] f2fs: Fix mount failure due to SPO after a successful online resize FS

[Greg Kroah-Hartman]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit 682756827501dc52593bf490f2d437c65ec9efcb ]

Even though online resize is successfully done, a SPO immediately
after resize, still causes below error in the next mount.

[   11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856
[   11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint

This is because after FS metadata is updated in update_fs_metadata()
if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect
the new user_block_count.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/gc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 5877bd7296896..e611d768efde3 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1532,11 +1532,17 @@ int f2fs_resize_fs(struct f2fs_sb_info *sbi, __u64 block_count)
 		goto out;
 	}
 
+	mutex_lock(&sbi->cp_mutex);
 	update_fs_metadata(sbi, -secs);
 	clear_sbi_flag(sbi, SBI_IS_RESIZEFS);
+	set_sbi_flag(sbi, SBI_IS_DIRTY);
+	mutex_unlock(&sbi->cp_mutex);
+
 	err = f2fs_sync_fs(sbi->sb, 1);
 	if (err) {
+		mutex_lock(&sbi->cp_mutex);
 		update_fs_metadata(sbi, secs);
+		mutex_unlock(&sbi->cp_mutex);
 		update_sb_metadata(sbi, secs);
 		f2fs_commit_super(sbi, false);
 	}
-- 
2.20.1

[PATCH 5.4 059/118] f2fs: Add a new CP flag to help fsck fix resize SPO issues

[Greg Kroah-Hartman]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit c84ef3c5e65ccf99a7a91a4d731ebb5d6331a178 ]

Add and set a new CP flag CP_RESIZEFS_FLAG during
online resize FS to help fsck fix the metadata mismatch
that may happen due to SPO during resize, where SB
got updated but CP data couldn't be written yet.

fsck errors -
Info: CKPT version = 6ed7bccb
        Wrong user_block_count(2233856)
[f2fs_do_mount:3365] Checkpoint is polluted

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c    | 8 ++++++--
 include/linux/f2fs_fs.h | 1 +
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 410f5c2c6ef17..a28ffecc0f95a 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1301,10 +1301,14 @@ static void update_ckpt_flags(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 	else
 		__clear_ckpt_flags(ckpt, CP_ORPHAN_PRESENT_FLAG);
 
-	if (is_sbi_flag_set(sbi, SBI_NEED_FSCK) ||
-		is_sbi_flag_set(sbi, SBI_IS_RESIZEFS))
+	if (is_sbi_flag_set(sbi, SBI_NEED_FSCK))
 		__set_ckpt_flags(ckpt, CP_FSCK_FLAG);
 
+	if (is_sbi_flag_set(sbi, SBI_IS_RESIZEFS))
+		__set_ckpt_flags(ckpt, CP_RESIZEFS_FLAG);
+	else
+		__clear_ckpt_flags(ckpt, CP_RESIZEFS_FLAG);
+
 	if (is_sbi_flag_set(sbi, SBI_CP_DISABLED))
 		__set_ckpt_flags(ckpt, CP_DISABLED_FLAG);
 	else
diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h
index 2847389960281..6bb6f718a1023 100644
--- a/include/linux/f2fs_fs.h
+++ b/include/linux/f2fs_fs.h
@@ -124,6 +124,7 @@ struct f2fs_super_block {
 /*
  * For checkpoint
  */
+#define CP_RESIZEFS_FLAG		0x00004000
 #define CP_DISABLED_QUICK_FLAG		0x00002000
 #define CP_DISABLED_FLAG		0x00001000
 #define CP_QUOTA_NEED_FSCK_FLAG		0x00000800
-- 
2.20.1

[PATCH 5.4 060/118] s390/cpuinfo: fix wrong output when CPU0 is offline

[Greg Kroah-Hartman]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ]

/proc/cpuinfo should not print information about CPU 0 when it is offline.

Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: shortened commit message]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/processor.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 6ebc2117c66c7..91b9b3f73de6e 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -165,8 +165,9 @@ static void show_cpu_mhz(struct seq_file *m, unsigned long n)
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	unsigned long n = (unsigned long) v - 1;
+	unsigned long first = cpumask_first(cpu_online_mask);
 
-	if (!n)
+	if (n == first)
 		show_cpu_summary(m, v);
 	if (!machine_has_cpu_mhz)
 		return 0;
@@ -179,6 +180,8 @@ static inline void *c_update(loff_t *pos)
 {
 	if (*pos)
 		*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	else
+		*pos = cpumask_first(cpu_online_mask);
 	return *pos < nr_cpu_ids ? (void *)*pos + 1 : NULL;
 }
 
-- 
2.20.1

[PATCH 5.4 061/118] hibernate: Allow uswsusp to write to swap

[Greg Kroah-Hartman]

From: Domenico Andreoli <domenico.andreoli@linux.com>

[ Upstream commit 56939e014a6c212b317414faa307029e2e80c3b9 ]

It turns out that there is one use case for programs being able to
write to swap devices, and that is the userspace hibernation code.

Quick fix: disable the S_SWAPFILE check if hibernation is configured.

Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files")
Reported-by: Domenico Andreoli <domenico.andreoli@linux.com>
Reported-by: Marian Klein <mkleinsoft@gmail.com>
Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/block_dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/block_dev.c b/fs/block_dev.c
index d612468ee66bf..34644ce4b5025 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -34,6 +34,7 @@
 #include <linux/task_io_accounting_ops.h>
 #include <linux/falloc.h>
 #include <linux/uaccess.h>
+#include <linux/suspend.h>
 #include "internal.h"
 
 struct bdev_inode {
@@ -1975,7 +1976,8 @@ ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	if (bdev_read_only(I_BDEV(bd_inode)))
 		return -EPERM;
 
-	if (IS_SWAPFILE(bd_inode))
+	/* uswsusp needs write permission to the swap */
+	if (IS_SWAPFILE(bd_inode) && !hibernation_available())
 		return -ETXTBSY;
 
 	if (!iov_iter_count(from))
-- 
2.20.1

[PATCH 5.4 062/118] btrfs: add RCU locks around block group initialization

[Greg Kroah-Hartman]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 29566c9c773456467933ee22bbca1c2b72a3506c ]

The space_info list is normally RCU protected and should be traversed
with rcu_read_lock held. There's a warning

  [29.104756] WARNING: suspicious RCU usage
  [29.105046] 5.6.0-rc4-next-20200305 #1 Not tainted
  [29.105231] -----------------------------
  [29.105401] fs/btrfs/block-group.c:2011 RCU-list traversed in non-reader section!!

pointing out that the locking is missing in btrfs_read_block_groups.
However this is not necessary as the list traversal happens at mount
time when there's no other thread potentially accessing the list.

To fix the warning and for consistency let's add the RCU lock/unlock,
the code won't be affected much as it's doing some lightweight
operations.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/block-group.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index 7dcfa7d7632a1..95330f40f998c 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -1829,6 +1829,7 @@ int btrfs_read_block_groups(struct btrfs_fs_info *info)
 		}
 	}
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(space_info, &info->space_info, list) {
 		if (!(btrfs_get_alloc_profile(info, space_info->flags) &
 		      (BTRFS_BLOCK_GROUP_RAID10 |
@@ -1849,6 +1850,7 @@ int btrfs_read_block_groups(struct btrfs_fs_info *info)
 				list)
 			inc_block_group_ro(cache, 1);
 	}
+	rcu_read_unlock();
 
 	btrfs_init_global_block_rsv(info);
 	ret = check_chunk_block_group_mappings(info);
-- 
2.20.1

[PATCH 5.4 063/118] powerpc/prom_init: Pass the "os-term" message to hypervisor

[Greg Kroah-Hartman]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit 74bb84e5117146fa73eb9d01305975c53022b3c3 ]

The "os-term" RTAS calls has one argument with a message address of OS
termination cause. rtas_os_term() already passes it but the recently
added prom_init's version of that missed it; it also does not fill
args correctly.

This passes the message address and initializes the number of arguments.

Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200312074404.87293-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom_init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index eba9d4ee4baf6..689664cd4e79b 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1761,6 +1761,9 @@ static void __init prom_rtas_os_term(char *str)
 	if (token == 0)
 		prom_panic("Could not get token for ibm,os-term\n");
 	os_term_args.token = cpu_to_be32(token);
+	os_term_args.nargs = cpu_to_be32(1);
+	os_term_args.nret = cpu_to_be32(1);
+	os_term_args.args[0] = cpu_to_be32(__pa(str));
 	prom_rtas_hcall((uint64_t)&os_term_args);
 }
 #endif /* CONFIG_PPC_SVM */
-- 
2.20.1

[PATCH 5.4 064/118] powerpc/maple: Fix declaration made after definition

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ]

When building ppc64 defconfig, Clang errors (trimmed for brevity):

  arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration
  must precede definition [-Werror,-Wignored-attributes]
  machine_device_initcall(maple, maple_cpc925_edac_setup);
  ^

machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.

To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.

While we're here, remove some spaces before tabs.

Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/maple/setup.c | 34 ++++++++++++++--------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 9cd6f3e1000b3..09a0594350b69 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -294,23 +294,6 @@ static int __init maple_probe(void)
 	return 1;
 }
 
-define_machine(maple) {
-	.name			= "Maple",
-	.probe			= maple_probe,
-	.setup_arch		= maple_setup_arch,
-	.init_IRQ		= maple_init_IRQ,
-	.pci_irq_fixup		= maple_pci_irq_fixup,
-	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,
-	.restart		= maple_restart,
-	.halt			= maple_halt,
-       	.get_boot_time		= maple_get_boot_time,
-       	.set_rtc_time		= maple_set_rtc_time,
-       	.get_rtc_time		= maple_get_rtc_time,
-      	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= maple_progress,
-	.power_save		= power4_idle,
-};
-
 #ifdef CONFIG_EDAC
 /*
  * Register a platform device for CPC925 memory controller on
@@ -367,3 +350,20 @@ static int __init maple_cpc925_edac_setup(void)
 }
 machine_device_initcall(maple, maple_cpc925_edac_setup);
 #endif
+
+define_machine(maple) {
+	.name			= "Maple",
+	.probe			= maple_probe,
+	.setup_arch		= maple_setup_arch,
+	.init_IRQ		= maple_init_IRQ,
+	.pci_irq_fixup		= maple_pci_irq_fixup,
+	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,
+	.restart		= maple_restart,
+	.halt			= maple_halt,
+	.get_boot_time		= maple_get_boot_time,
+	.set_rtc_time		= maple_set_rtc_time,
+	.get_rtc_time		= maple_get_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= maple_progress,
+	.power_save		= power4_idle,
+};
-- 
2.20.1

[PATCH 5.4 065/118] s390/cpum_sf: Fix wrong page count in error message

[Greg Kroah-Hartman]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 4141b6a5e9f171325effc36a22eb92bf961e7a5c ]

When perf record -e SF_CYCLES_BASIC_DIAG runs with very high
frequency, the samples arrive faster than the perf process can
save them to file. Eventually, for longer running processes, this
leads to the siutation where the trace buffers allocated by perf
slowly fills up. At one point the auxiliary trace buffer is full
and  the CPU Measurement sampling facility is turned off. Furthermore
a warning is printed to the kernel log buffer:

cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling
	mode is full

The number of allocated pages for the auxiliary trace buffer is shown
as zero pages. That is wrong.

Fix this by saving the number of allocated pages before entering the
work loop in the interrupt handler. When the interrupt handler processes
the samples, it may detect the buffer full condition and stop sampling,
reducing the buffer size to zero.
Print the correct value in the error message:

cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling
	mode is full

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/perf_cpum_sf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index fdb8083e7870c..229e1e2f8253a 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1589,6 +1589,7 @@ static void hw_collect_aux(struct cpu_hw_sf *cpuhw)
 	perf_aux_output_end(handle, size);
 	num_sdb = aux->sfb.num_sdb;
 
+	num_sdb = aux->sfb.num_sdb;
 	while (!done) {
 		/* Get an output handle */
 		aux = perf_aux_output_begin(handle, cpuhw->event);
-- 
2.20.1

[PATCH 5.4 066/118] ext4: do not commit super on read-only bdev

[Greg Kroah-Hartman]

From: Eric Sandeen <sandeen@redhat.com>

[ Upstream commit c96e2b8564adfb8ac14469ebc51ddc1bfecb3ae2 ]

Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...

To avoid this, commit the error info in the superblock only if the
block device is writable.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 8f7a46d3abffb..53d4c67a20df9 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -389,7 +389,8 @@ static void save_error_info(struct super_block *sb, const char *func,
 			    unsigned int line)
 {
 	__save_error_info(sb, func, line);
-	ext4_commit_super(sb, 1);
+	if (!bdev_read_only(sb->s_bdev))
+		ext4_commit_super(sb, 1);
 }
 
 /*
-- 
2.20.1

[PATCH 5.4 067/118] um: ubd: Prevent buffer overrun on command completion

[Greg Kroah-Hartman]

From: Gabriel Krisman Bertazi <krisman@collabora.com>

[ Upstream commit 6e682d53fc1ef73a169e2a5300326cb23abb32ee ]

On the hypervisor side, when completing commands and the pipe is full,
we retry writing only the entries that failed, by offsetting
io_req_buffer, but we don't reduce the number of bytes written, which
can cause a buffer overrun of io_req_buffer, and write garbage to the
pipe.

Cc: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/drivers/ubd_kern.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 6627d7c30f370..0f5d0a699a49b 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -1606,7 +1606,9 @@ int io_thread(void *arg)
 		written = 0;
 
 		do {
-			res = os_write_file(kernel_fd, ((char *) io_req_buffer) + written, n);
+			res = os_write_file(kernel_fd,
+					    ((char *) io_req_buffer) + written,
+					    n - written);
 			if (res >= 0) {
 				written += res;
 			}
-- 
2.20.1

[PATCH 5.4 068/118] cifs: Allocate encryption header through kmalloc

[Greg Kroah-Hartman]

From: Long Li <longli@microsoft.com>

[ Upstream commit 3946d0d04bb360acca72db5efe9ae8440012d9dc ]

When encryption is used, smb2_transform_hdr is defined on the stack and is
passed to the transport. This doesn't work with RDMA as the buffer needs to
be DMA'ed.

Fix it by using kmalloc.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/transport.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index e67a43fd037c9..fe1552cc8a0a7 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -466,7 +466,7 @@ smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
 	      struct smb_rqst *rqst, int flags)
 {
 	struct kvec iov;
-	struct smb2_transform_hdr tr_hdr;
+	struct smb2_transform_hdr *tr_hdr;
 	struct smb_rqst cur_rqst[MAX_COMPOUND];
 	int rc;
 
@@ -476,28 +476,34 @@ smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
 	if (num_rqst > MAX_COMPOUND - 1)
 		return -ENOMEM;
 
-	memset(&cur_rqst[0], 0, sizeof(cur_rqst));
-	memset(&iov, 0, sizeof(iov));
-	memset(&tr_hdr, 0, sizeof(tr_hdr));
-
-	iov.iov_base = &tr_hdr;
-	iov.iov_len = sizeof(tr_hdr);
-	cur_rqst[0].rq_iov = &iov;
-	cur_rqst[0].rq_nvec = 1;
-
 	if (!server->ops->init_transform_rq) {
 		cifs_server_dbg(VFS, "Encryption requested but transform "
 				"callback is missing\n");
 		return -EIO;
 	}
 
+	tr_hdr = kmalloc(sizeof(*tr_hdr), GFP_NOFS);
+	if (!tr_hdr)
+		return -ENOMEM;
+
+	memset(&cur_rqst[0], 0, sizeof(cur_rqst));
+	memset(&iov, 0, sizeof(iov));
+	memset(tr_hdr, 0, sizeof(*tr_hdr));
+
+	iov.iov_base = tr_hdr;
+	iov.iov_len = sizeof(*tr_hdr);
+	cur_rqst[0].rq_iov = &iov;
+	cur_rqst[0].rq_nvec = 1;
+
 	rc = server->ops->init_transform_rq(server, num_rqst + 1,
 					    &cur_rqst[0], rqst);
 	if (rc)
-		return rc;
+		goto out;
 
 	rc = __smb_send_rqst(server, num_rqst + 1, &cur_rqst[0]);
 	smb3_free_compound_rqst(num_rqst, &cur_rqst[1]);
+out:
+	kfree(tr_hdr);
 	return rc;
 }
 
-- 
2.20.1

[PATCH 5.4 069/118] mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit bb297bb2de517e41199185021f043bbc5d75b377 ]

When CONFIG_HUGETLB_PAGE is set but not CONFIG_HUGETLBFS, the following
build failure is encoutered:

  In file included from arch/powerpc/mm/fault.c:33:0:
  include/linux/hugetlb.h: In function 'hstate_inode':
  include/linux/hugetlb.h:477:9: error: implicit declaration of function 'HUGETLBFS_SB' [-Werror=implicit-function-declaration]
    return HUGETLBFS_SB(i->i_sb)->hstate;
           ^
  include/linux/hugetlb.h:477:30: error: invalid type argument of '->' (have 'int')
    return HUGETLBFS_SB(i->i_sb)->hstate;
                                ^

Gate hstate_inode() with CONFIG_HUGETLBFS instead of CONFIG_HUGETLB_PAGE.

Fixes: a137e1cc6d6e ("hugetlbfs: per mount huge page sizes")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Link: http://lkml.kernel.org/r/7e8c3a3c9a587b9cd8a2f146df32a421b961f3a2.1584432148.git.christophe.leroy@c-s.fr
Link: https://patchwork.ozlabs.org/patch/1255548/#2386036
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/hugetlb.h | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 53fc34f930d08..8a03f392f3680 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -298,7 +298,10 @@ static inline bool is_file_hugepages(struct file *file)
 	return is_file_shm_hugepages(file);
 }
 
-
+static inline struct hstate *hstate_inode(struct inode *i)
+{
+	return HUGETLBFS_SB(i->i_sb)->hstate;
+}
 #else /* !CONFIG_HUGETLBFS */
 
 #define is_file_hugepages(file)			false
@@ -310,6 +313,10 @@ hugetlb_file_setup(const char *name, size_t size, vm_flags_t acctflag,
 	return ERR_PTR(-ENOSYS);
 }
 
+static inline struct hstate *hstate_inode(struct inode *i)
+{
+	return NULL;
+}
 #endif /* !CONFIG_HUGETLBFS */
 
 #ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
@@ -379,11 +386,6 @@ extern unsigned int default_hstate_idx;
 
 #define default_hstate (hstates[default_hstate_idx])
 
-static inline struct hstate *hstate_inode(struct inode *i)
-{
-	return HUGETLBFS_SB(i->i_sb)->hstate;
-}
-
 static inline struct hstate *hstate_file(struct file *f)
 {
 	return hstate_inode(file_inode(f));
@@ -636,11 +638,6 @@ static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
 	return NULL;
 }
 
-static inline struct hstate *hstate_inode(struct inode *i)
-{
-	return NULL;
-}
-
 static inline struct hstate *page_hstate(struct page *page)
 {
 	return NULL;
-- 
2.20.1

[PATCH 5.4 070/118] drm/nouveau/svm: check for SVM initialized before migrating

[Greg Kroah-Hartman]

From: Ralph Campbell <rcampbell@nvidia.com>

[ Upstream commit 822cab6150d3002952407a8297ff5a0d32bb7b54 ]

When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_svm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c
index 668d4bd0c118f..25b7055949c45 100644
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -173,6 +173,11 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 	mm = get_task_mm(current);
 	down_read(&mm->mmap_sem);
 
+	if (!cli->svm.svmm) {
+		up_read(&mm->mmap_sem);
+		return -EINVAL;
+	}
+
 	for (addr = args->va_start, end = args->va_start + size; addr < end;) {
 		struct vm_area_struct *vma;
 		unsigned long next;
-- 
2.20.1

[PATCH 5.4 071/118] drm/nouveau/svm: fix vma range check for migration

[Greg Kroah-Hartman]

From: Ralph Campbell <rcampbell@nvidia.com>

[ Upstream commit b92103b559c77abc5f8b7bec269230a219c880b7 ]

find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_svm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c
index 25b7055949c45..824654742a604 100644
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -186,6 +186,7 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 		if (!vma)
 			break;
 
+		addr = max(addr, vma->vm_start);
 		next = min(vma->vm_end, end);
 		/* This is a best effort so we ignore errors */
 		nouveau_dmem_migrate_vma(cli->drm, vma, addr, next);
-- 
2.20.1

[PATCH 5.4 072/118] include/linux/swapops.h: correct guards for non_swap_entry()

[Greg Kroah-Hartman]

From: Steven Price <steven.price@arm.com>

[ Upstream commit 3f3673d7d324d872d9d8ddb73b3e5e47fbf12e0d ]

If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor
CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the
condition (non_swap_entry(entry) && is_device_private_entry(entry)) in
zap_pte_range() will never be true even if the entry is a device private
one.

Equally any other code depending on non_swap_entry() will not function as
expected.

I originally spotted this just by looking at the code, I haven't actually
observed any problems.

Looking a bit more closely it appears that actually this situation
(currently at least) cannot occur:

DEVICE_PRIVATE depends on ZONE_DEVICE
ZONE_DEVICE depends on MEMORY_HOTREMOVE
MEMORY_HOTREMOVE depends on MIGRATION

Fixes: 5042db43cc26 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/swapops.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 877fd239b6fff..3208a520d0be3 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -348,7 +348,8 @@ static inline void num_poisoned_pages_inc(void)
 }
 #endif
 
-#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION)
+#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION) || \
+    defined(CONFIG_DEVICE_PRIVATE)
 static inline int non_swap_entry(swp_entry_t entry)
 {
 	return swp_type(entry) >= MAX_SWAPFILES;
-- 
2.20.1

[PATCH 5.4 073/118] percpu_counter: fix a data race at vm_committed_as

[Greg Kroah-Hartman]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 7e2345200262e4a6056580f0231cccdaffc825f3 ]

"vm_committed_as.count" could be accessed concurrently as reported by
KCSAN,

 BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch

 write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35:
  percpu_counter_add_batch+0x83/0xd0
  percpu_counter_add_batch at lib/percpu_counter.c:91
  __vm_enough_memory+0xb9/0x260
  dup_mm+0x3a4/0x8f0
  copy_process+0x2458/0x3240
  _do_fork+0xaa/0x9f0
  __do_sys_clone+0x125/0x160
  __x64_sys_clone+0x70/0x90
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19:
  __vm_enough_memory+0x199/0x260
  percpu_counter_read_positive at include/linux/percpu_counter.h:81
  (inlined by) __vm_enough_memory at mm/util.c:839
  mmap_region+0x1b2/0xa10
  do_mmap+0x45c/0x700
  vm_mmap_pgoff+0xc0/0x130
  ksys_mmap_pgoff+0x6e/0x300
  __x64_sys_mmap+0x33/0x40
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The read is outside percpu_counter::lock critical section which results in
a data race.  Fix it by adding a READ_ONCE() in
percpu_counter_read_positive() which could also service as the existing
compiler memory barrier.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/percpu_counter.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
index 4f052496cdfd7..0a4f54dd4737b 100644
--- a/include/linux/percpu_counter.h
+++ b/include/linux/percpu_counter.h
@@ -78,9 +78,9 @@ static inline s64 percpu_counter_read(struct percpu_counter *fbc)
  */
 static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc)
 {
-	s64 ret = fbc->count;
+	/* Prevent reloads of fbc->count */
+	s64 ret = READ_ONCE(fbc->count);
 
-	barrier();		/* Prevent reloads of fbc->count */
 	if (ret >= 0)
 		return ret;
 	return 0;
-- 
2.20.1

[PATCH 5.4 074/118] compiler.h: fix error in BUILD_BUG_ON() reporting

[Greg Kroah-Hartman]

From: Vegard Nossum <vegard.nossum@oracle.com>

[ Upstream commit af9c5d2e3b355854ff0e4acfbfbfadcd5198a349 ]

compiletime_assert() uses __LINE__ to create a unique function name.  This
means that if you have more than one BUILD_BUG_ON() in the same source
line (which can happen if they appear e.g.  in a macro), then the error
message from the compiler might output the wrong condition.

For this source file:

	#include <linux/build_bug.h>

	#define macro() \
		BUILD_BUG_ON(1); \
		BUILD_BUG_ON(0);

	void foo()
	{
		macro();
	}

gcc would output:

./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)

However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1
instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so
each BUILD_BUG_ON() gets a different function name and the correct
condition is printed:

./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/compiler.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 5e88e7e33abec..034b0a644efcc 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -347,7 +347,7 @@ static inline void *offset_to_ptr(const int *off)
  * compiler has support to do so.
  */
 #define compiletime_assert(condition, msg) \
-	_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
+	_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
 
 #define compiletime_assert_atomic_type(t)				\
 	compiletime_assert(__native_word(t),				\
-- 
2.20.1

[PATCH 5.4 075/118] KVM: s390: vsie: Fix possible race when shadowing region 3 tables

[Greg Kroah-Hartman]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ]

We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.

We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.

Identified by manual code inspection. I don't think this classifies as
stable material.

Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/gmap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 9d9ab77d02dd3..364e3a89c0969 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -1844,6 +1844,7 @@ int gmap_shadow_r3t(struct gmap *sg, unsigned long saddr, unsigned long r3t,
 		goto out_free;
 	} else if (*table & _REGION_ENTRY_ORIGIN) {
 		rc = -EAGAIN;		/* Race with shadow */
+		goto out_free;
 	}
 	crst_table_init(s_r3t, _REGION3_ENTRY_EMPTY);
 	/* mark as invalid as long as the parent table is not protected */
-- 
2.20.1

[PATCH 5.4 076/118] drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges

[Greg Kroah-Hartman]

From: Karol Herbst <kherbst@redhat.com>

[ Upstream commit 434fdb51513bf3057ac144d152e6f2f2b509e857 ]

Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.

Depending on the used kernel there might be messages like those in demsg:

"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.

It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 63 +++++++++++++++++++++++++++
 drivers/gpu/drm/nouveau/nouveau_drv.h |  2 +
 2 files changed, 65 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 2cd83849600f3..b1beed40e746a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -618,6 +618,64 @@ nouveau_drm_device_fini(struct drm_device *dev)
 	kfree(drm);
 }
 
+/*
+ * On some Intel PCIe bridge controllers doing a
+ * D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear.
+ * Skipping the intermediate D3hot step seems to make it work again. This is
+ * probably caused by not meeting the expectation the involved AML code has
+ * when the GPU is put into D3hot state before invoking it.
+ *
+ * This leads to various manifestations of this issue:
+ *  - AML code execution to power on the GPU hits an infinite loop (as the
+ *    code waits on device memory to change).
+ *  - kernel crashes, as all PCI reads return -1, which most code isn't able
+ *    to handle well enough.
+ *
+ * In all cases dmesg will contain at least one line like this:
+ * 'nouveau 0000:01:00.0: Refused to change power state, currently in D3'
+ * followed by a lot of nouveau timeouts.
+ *
+ * In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not
+ * documented PCI config space register 0x248 of the Intel PCIe bridge
+ * controller (0x1901) in order to change the state of the PCIe link between
+ * the PCIe port and the GPU. There are alternative code paths using other
+ * registers, which seem to work fine (executed pre Windows 8):
+ *  - 0xbc bit 0x20 (publicly available documentation claims 'reserved')
+ *  - 0xb0 bit 0x10 (link disable)
+ * Changing the conditions inside the firmware by poking into the relevant
+ * addresses does resolve the issue, but it seemed to be ACPI private memory
+ * and not any device accessible memory at all, so there is no portable way of
+ * changing the conditions.
+ * On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared.
+ *
+ * The only systems where this behavior can be seen are hybrid graphics laptops
+ * with a secondary Nvidia Maxwell, Pascal or Turing GPU. It's unclear whether
+ * this issue only occurs in combination with listed Intel PCIe bridge
+ * controllers and the mentioned GPUs or other devices as well.
+ *
+ * documentation on the PCIe bridge controller can be found in the
+ * "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2"
+ * Section "12 PCI Express* Controller (x16) Registers"
+ */
+
+static void quirk_broken_nv_runpm(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct pci_dev *bridge = pci_upstream_bridge(pdev);
+
+	if (!bridge || bridge->vendor != PCI_VENDOR_ID_INTEL)
+		return;
+
+	switch (bridge->device) {
+	case 0x1901:
+		drm->old_pm_cap = pdev->pm_cap;
+		pdev->pm_cap = 0;
+		NV_INFO(drm, "Disabling PCI power management to avoid bug\n");
+		break;
+	}
+}
+
 static int nouveau_drm_probe(struct pci_dev *pdev,
 			     const struct pci_device_id *pent)
 {
@@ -699,6 +757,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,
 	if (ret)
 		goto fail_drm_dev_init;
 
+	quirk_broken_nv_runpm(pdev);
 	return 0;
 
 fail_drm_dev_init:
@@ -736,7 +795,11 @@ static void
 nouveau_drm_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
 
+	/* revert our workaround */
+	if (drm->old_pm_cap)
+		pdev->pm_cap = drm->old_pm_cap;
 	nouveau_drm_device_remove(dev);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 70f34cacc552c..8104e3806499d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -138,6 +138,8 @@ struct nouveau_drm {
 
 	struct list_head clients;
 
+	u8 old_pm_cap;
+
 	struct {
 		struct agp_bridge_data *bridge;
 		u32 base;
-- 
2.20.1

[PATCH 5.4 077/118] leds: core: Fix warning message when init_data

[Greg Kroah-Hartman]

From: Ricardo Ribalda Delgado <ribalda@kernel.org>

[ Upstream commit 64ed6588c2ea618d3f9ca9d8b365ae4c19f76225 ]

The warning message when a led is renamed due to name collition can fail
to show proper original name if init_data is used. Eg:

[    9.073996] leds-gpio a0040000.leds_0: Led (null) renamed to red_led_1 due to name collision

Fixes: bb4e9af0348d ("leds: core: Add support for composing LED class device names")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-class.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 647b1263c5794..d3e83c33783e5 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -281,7 +281,7 @@ int led_classdev_register_ext(struct device *parent,
 
 	if (ret)
 		dev_warn(parent, "Led %s renamed to %s due to name collision",
-				led_cdev->name, dev_name(led_cdev->dev));
+				proposed_name, dev_name(led_cdev->dev));
 
 	if (led_cdev->flags & LED_BRIGHT_HW_CHANGED) {
 		ret = led_add_brightness_hw_changed(led_cdev);
-- 
2.20.1

[PATCH 5.4 078/118] x86: ACPI: fix CPU hotplug deadlock

[Greg Kroah-Hartman]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ]

Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():

"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.

It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.

Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."

 WARNING: possible circular locking dependency detected
 ------------------------------------------------------
 cpuhp/1/15 is trying to acquire lock:
 ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630

 but task is already holding lock:
 ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
 cpus_read_lock+0x3e/0xc0
 irq_calc_affinity_vectors+0x5f/0x91
 __pci_enable_msix_range+0x10f/0x9a0
 pci_alloc_irq_vectors_affinity+0x13e/0x1f0
 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
 pqi_ctrl_init+0x72f/0x1618 [smartpqi]
 pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
 local_pci_probe+0x7a/0xc0
 work_for_cpu_fn+0x2e/0x50
 process_one_work+0x57e/0xb90
 worker_thread+0x363/0x5b0
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 other info that might help us debug this:

 Chain exists of:
 (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock

 Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
 lock(cpuidle_lock);
                         lock(cpuhp_state-up);
                         lock(cpuidle_lock);
 lock((work_completion)(&wfc.work));

 *** DEADLOCK ***

 3 locks held by cpuhp/1/15:
 #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 Call Trace:
 dump_stack+0xa0/0xea
 print_circular_bug.cold.52+0x147/0x14c
 check_noncircular+0x295/0x2d0
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/acpi/cstate.c       | 3 ++-
 drivers/acpi/processor_throttling.c | 7 -------
 include/acpi/processor.h            | 8 ++++++++
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index caf2edccbad2e..49ae4e1ac9cd8 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -161,7 +161,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 
-	retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx);
+	retval = call_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx,
+			     false);
 	if (retval == 0) {
 		/* Use the hint in CST */
 		percpu_entry->states[cx->index].eax = cx->address;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 532a1ae3595a7..a0bd56ece3ff5 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -897,13 +897,6 @@ static long __acpi_processor_get_throttling(void *data)
 	return pr->throttling.acpi_processor_get_throttling(pr);
 }
 
-static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct)
-{
-	if (direct || (is_percpu_thread() && cpu == smp_processor_id()))
-		return fn(arg);
-	return work_on_cpu(cpu, fn, arg);
-}
-
 static int acpi_processor_get_throttling(struct acpi_processor *pr)
 {
 	if (!pr)
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 47805172e73d8..683e124ad517d 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -297,6 +297,14 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
 }
 #endif
 
+static inline int call_on_cpu(int cpu, long (*fn)(void *), void *arg,
+			      bool direct)
+{
+	if (direct || (is_percpu_thread() && cpu == smp_processor_id()))
+		return fn(arg);
+	return work_on_cpu(cpu, fn, arg);
+}
+
 /* in processor_perflib.c */
 
 #ifdef CONFIG_CPU_FREQ
-- 
2.20.1

[PATCH 5.4 079/118] csky: Fixup cpu speculative execution to IO area

[Greg Kroah-Hartman]

From: Guo Ren <guoren@linux.alibaba.com>

[ Upstream commit aefd9461d34a1b0a2acad0750c43216c1c27b9d4 ]

For the memory size ( > 512MB, < 1GB), the MSA setting is:

 - SSEG0: PHY_START        , PHY_START + 512MB
 - SSEG1: PHY_START + 512MB, PHY_START + 1GB

But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.

Now make the setting with:

 - SSEG0: PHY_START        , PHY_START + 512MB (no change)
 - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)

We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/abiv1/inc/abi/entry.h |  5 +--
 arch/csky/abiv2/inc/abi/entry.h |  7 ++--
 arch/csky/kernel/head.S         |  5 +++
 arch/csky/kernel/setup.c        | 63 ++++++++-------------------------
 arch/csky/kernel/smp.c          |  3 ++
 5 files changed, 25 insertions(+), 58 deletions(-)

diff --git a/arch/csky/abiv1/inc/abi/entry.h b/arch/csky/abiv1/inc/abi/entry.h
index f35a9f3315ee6..5056ebb902d18 100644
--- a/arch/csky/abiv1/inc/abi/entry.h
+++ b/arch/csky/abiv1/inc/abi/entry.h
@@ -172,10 +172,7 @@
 	addi	r6, 0xe
 	cpwcr	r6, cpcr30
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0xe
+	movi	r6, 0
 	cpwcr	r6, cpcr31
 .endm
 
diff --git a/arch/csky/abiv2/inc/abi/entry.h b/arch/csky/abiv2/inc/abi/entry.h
index 94a7a58765dff..111973c6c713f 100644
--- a/arch/csky/abiv2/inc/abi/entry.h
+++ b/arch/csky/abiv2/inc/abi/entry.h
@@ -230,11 +230,8 @@
 	addi	r6, 0x1ce
 	mtcr	r6, cr<30, 15> /* Set MSA0 */
 
-	lsri	r6, 28
-	addi	r6, 2
-	lsli	r6, 28
-	addi	r6, 0x1ce
-	mtcr	r6, cr<31, 15> /* Set MSA1 */
+	movi    r6, 0
+	mtcr	r6, cr<31, 15> /* Clr MSA1 */
 
 	/* enable MMU */
 	mfcr    r6, cr18
diff --git a/arch/csky/kernel/head.S b/arch/csky/kernel/head.S
index 61989f9241c02..17ed9d2504807 100644
--- a/arch/csky/kernel/head.S
+++ b/arch/csky/kernel/head.S
@@ -21,6 +21,11 @@ END(_start)
 ENTRY(_start_smp_secondary)
 	SETUP_MMU
 
+	/* copy msa1 from CPU0 */
+	lrw     r6, secondary_msa1
+	ld.w	r6, (r6, 0)
+	mtcr	r6, cr<31, 15>
+
 	/* set stack point */
 	lrw     r6, secondary_stack
 	ld.w	r6, (r6, 0)
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index 23ee604aafdb6..2c1e253abb74c 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -24,26 +24,9 @@ struct screen_info screen_info = {
 };
 #endif
 
-phys_addr_t __init_memblock memblock_end_of_REG0(void)
-{
-	return (memblock.memory.regions[0].base +
-		memblock.memory.regions[0].size);
-}
-
-phys_addr_t __init_memblock memblock_start_of_REG1(void)
-{
-	return memblock.memory.regions[1].base;
-}
-
-size_t __init_memblock memblock_size_of_REG1(void)
-{
-	return memblock.memory.regions[1].size;
-}
-
 static void __init csky_memblock_init(void)
 {
 	unsigned long zone_size[MAX_NR_ZONES];
-	unsigned long zhole_size[MAX_NR_ZONES];
 	signed long size;
 
 	memblock_reserve(__pa(_stext), _end - _stext);
@@ -57,54 +40,36 @@ static void __init csky_memblock_init(void)
 	memblock_dump_all();
 
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
-	max_pfn	    = PFN_DOWN(memblock_end_of_DRAM());
-
-	max_low_pfn = PFN_UP(memblock_end_of_REG0());
-	if (max_low_pfn == 0)
-		max_low_pfn = max_pfn;
+	max_low_pfn = max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 
 	size = max_pfn - min_low_pfn;
 
-	if (memblock.memory.cnt > 1) {
-		zone_size[ZONE_NORMAL]  =
-			PFN_DOWN(memblock_start_of_REG1()) - min_low_pfn;
-		zhole_size[ZONE_NORMAL] =
-			PFN_DOWN(memblock_start_of_REG1()) - max_low_pfn;
+	if (size <= PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET))
+		zone_size[ZONE_NORMAL] = size;
+	else if (size < PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET)) {
+		zone_size[ZONE_NORMAL] =
+				PFN_DOWN(SSEG_SIZE - PHYS_OFFSET_OFFSET);
+		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
 	} else {
-		if (size <= PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET))
-			zone_size[ZONE_NORMAL] = max_pfn - min_low_pfn;
-		else {
-			zone_size[ZONE_NORMAL] =
+		zone_size[ZONE_NORMAL] =
 				PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-			max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
-		}
+		max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
+		write_mmu_msa1(read_mmu_msa0() + SSEG_SIZE);
 	}
 
 #ifdef CONFIG_HIGHMEM
-	size = 0;
-	if (memblock.memory.cnt > 1) {
-		size = PFN_DOWN(memblock_size_of_REG1());
-		highstart_pfn = PFN_DOWN(memblock_start_of_REG1());
-	} else {
-		size = max_pfn - min_low_pfn -
-			PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-		highstart_pfn =  min_low_pfn +
-			PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
-	}
-
-	if (size > 0)
-		zone_size[ZONE_HIGHMEM] = size;
+	zone_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
 
-	highend_pfn = max_pfn;
+	highstart_pfn = max_low_pfn;
+	highend_pfn   = max_pfn;
 #endif
 	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 
 	dma_contiguous_reserve(0);
 
-	free_area_init_node(0, zone_size, min_low_pfn, zhole_size);
+	free_area_init_node(0, zone_size, min_low_pfn, NULL);
 }
 
 void __init setup_arch(char **cmdline_p)
diff --git a/arch/csky/kernel/smp.c b/arch/csky/kernel/smp.c
index 0bb0954d55709..de61feb4b6df2 100644
--- a/arch/csky/kernel/smp.c
+++ b/arch/csky/kernel/smp.c
@@ -156,6 +156,8 @@ volatile unsigned int secondary_hint;
 volatile unsigned int secondary_ccr;
 volatile unsigned int secondary_stack;
 
+unsigned long secondary_msa1;
+
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	unsigned long mask = 1 << cpu;
@@ -164,6 +166,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 		(unsigned int) task_stack_page(tidle) + THREAD_SIZE - 8;
 	secondary_hint = mfcr("cr31");
 	secondary_ccr  = mfcr("cr18");
+	secondary_msa1 = read_mmu_msa1();
 
 	/*
 	 * Because other CPUs are in reset status, we must flush data
-- 
2.20.1

[PATCH 5.4 080/118] drm/amdkfd: kfree the wrong pointer

[Greg Kroah-Hartman]

From: Jack Zhang <Jack.Zhang1@amd.com>

[ Upstream commit 3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ]

Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index 0dc1084b5e829..ad9483b9eea32 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -1112,9 +1112,9 @@ int kfd_gtt_sa_allocate(struct kfd_dev *kfd, unsigned int size,
 	return 0;
 
 kfd_gtt_no_free_chunk:
-	pr_debug("Allocation failed with mem_obj = %p\n", mem_obj);
+	pr_debug("Allocation failed with mem_obj = %p\n", *mem_obj);
 	mutex_unlock(&kfd->gtt_sa_lock);
-	kfree(mem_obj);
+	kfree(*mem_obj);
 	return -ENOMEM;
 }
 
-- 
2.20.1

[PATCH 5.4 081/118] NFS: Fix memory leaks in nfs_pageio_stop_mirroring()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ]

If we just set the mirror count to 1 without first clearing out
the mirrors, we can leak queued up requests.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/pagelist.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 8b7c525dbbf7c..b736912098eee 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -886,15 +886,6 @@ static void nfs_pageio_setup_mirroring(struct nfs_pageio_descriptor *pgio,
 	pgio->pg_mirror_count = mirror_count;
 }
 
-/*
- * nfs_pageio_stop_mirroring - stop using mirroring (set mirror count to 1)
- */
-void nfs_pageio_stop_mirroring(struct nfs_pageio_descriptor *pgio)
-{
-	pgio->pg_mirror_count = 1;
-	pgio->pg_mirror_idx = 0;
-}
-
 static void nfs_pageio_cleanup_mirroring(struct nfs_pageio_descriptor *pgio)
 {
 	pgio->pg_mirror_count = 1;
@@ -1320,6 +1311,14 @@ void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *desc, pgoff_t index)
 	}
 }
 
+/*
+ * nfs_pageio_stop_mirroring - stop using mirroring (set mirror count to 1)
+ */
+void nfs_pageio_stop_mirroring(struct nfs_pageio_descriptor *pgio)
+{
+	nfs_pageio_complete(pgio);
+}
+
 int __init nfs_init_nfspagecache(void)
 {
 	nfs_page_cachep = kmem_cache_create("nfs_page",
-- 
2.20.1

[PATCH 5.4 082/118] csky: Fixup get wrong psr value from phyical reg

[Greg Kroah-Hartman]

From: Guo Ren <guoren@linux.alibaba.com>

[ Upstream commit 9c0e343d7654a329d1f9b53d253cbf7fb6eff85d ]

We should get psr value from regs->psr in stack, not directly get
it from phyiscal register then save the vector number in
tsk->trap_no.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/include/asm/processor.h |  1 +
 arch/csky/kernel/traps.c          | 11 ++++++++++-
 arch/csky/mm/fault.c              |  7 +++++++
 3 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/csky/include/asm/processor.h b/arch/csky/include/asm/processor.h
index 21e0bd5293dde..c6bcd7f7c720b 100644
--- a/arch/csky/include/asm/processor.h
+++ b/arch/csky/include/asm/processor.h
@@ -43,6 +43,7 @@ extern struct cpuinfo_csky cpu_data[];
 struct thread_struct {
 	unsigned long  ksp;       /* kernel stack pointer */
 	unsigned long  sr;        /* saved status register */
+	unsigned long  trap_no;   /* saved status register */
 
 	/* FPU regs */
 	struct user_fp __aligned(16) user_fp;
diff --git a/arch/csky/kernel/traps.c b/arch/csky/kernel/traps.c
index b057480e7463c..63715cb90ee99 100644
--- a/arch/csky/kernel/traps.c
+++ b/arch/csky/kernel/traps.c
@@ -115,8 +115,9 @@ asmlinkage void trap_c(struct pt_regs *regs)
 	int sig;
 	unsigned long vector;
 	siginfo_t info;
+	struct task_struct *tsk = current;
 
-	vector = (mfcr("psr") >> 16) & 0xff;
+	vector = (regs->sr >> 16) & 0xff;
 
 	switch (vector) {
 	case VEC_ZERODIV:
@@ -129,6 +130,7 @@ asmlinkage void trap_c(struct pt_regs *regs)
 		sig = SIGTRAP;
 		break;
 	case VEC_ILLEGAL:
+		tsk->thread.trap_no = vector;
 		die_if_kernel("Kernel mode ILLEGAL", regs, vector);
 #ifndef CONFIG_CPU_NO_USER_BKPT
 		if (*(uint16_t *)instruction_pointer(regs) != USR_BKPT)
@@ -146,16 +148,20 @@ asmlinkage void trap_c(struct pt_regs *regs)
 		sig = SIGTRAP;
 		break;
 	case VEC_ACCESS:
+		tsk->thread.trap_no = vector;
 		return buserr(regs);
 #ifdef CONFIG_CPU_NEED_SOFTALIGN
 	case VEC_ALIGN:
+		tsk->thread.trap_no = vector;
 		return csky_alignment(regs);
 #endif
 #ifdef CONFIG_CPU_HAS_FPU
 	case VEC_FPE:
+		tsk->thread.trap_no = vector;
 		die_if_kernel("Kernel mode FPE", regs, vector);
 		return fpu_fpe(regs);
 	case VEC_PRIV:
+		tsk->thread.trap_no = vector;
 		die_if_kernel("Kernel mode PRIV", regs, vector);
 		if (fpu_libc_helper(regs))
 			return;
@@ -164,5 +170,8 @@ asmlinkage void trap_c(struct pt_regs *regs)
 		sig = SIGSEGV;
 		break;
 	}
+
+	tsk->thread.trap_no = vector;
+
 	send_sig(sig, current, 0);
 }
diff --git a/arch/csky/mm/fault.c b/arch/csky/mm/fault.c
index f76618b630f91..562c7f7087490 100644
--- a/arch/csky/mm/fault.c
+++ b/arch/csky/mm/fault.c
@@ -179,11 +179,14 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 bad_area_nosemaphore:
 	/* User mode accesses just cause a SIGSEGV */
 	if (user_mode(regs)) {
+		tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
 		force_sig_fault(SIGSEGV, si_code, (void __user *)address);
 		return;
 	}
 
 no_context:
+	tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
+
 	/* Are we prepared to handle this kernel fault? */
 	if (fixup_exception(regs))
 		return;
@@ -198,6 +201,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	die_if_kernel("Oops", regs, write);
 
 out_of_memory:
+	tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
+
 	/*
 	 * We ran out of memory, call the OOM killer, and return the userspace
 	 * (which will retry the fault, or kill us if we got oom-killed).
@@ -206,6 +211,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	return;
 
 do_sigbus:
+	tsk->thread.trap_no = (regs->sr >> 16) & 0xff;
+
 	up_read(&mm->mmap_sem);
 
 	/* Kernel mode? Handle exceptions or die */
-- 
2.20.1

[PATCH 5.4 083/118] f2fs: fix NULL pointer dereference in f2fs_write_begin()

[Greg Kroah-Hartman]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 62f63eea291b50a5677ae7503ac128803174698a ]

BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs]
Call Trace:
 f2fs_quota_write+0x139/0x1d0 [f2fs]
 write_blk+0x36/0x80 [quota_tree]
 get_free_dqblk+0x42/0xa0 [quota_tree]
 do_insert_tree+0x235/0x4a0 [quota_tree]
 do_insert_tree+0x26e/0x4a0 [quota_tree]
 do_insert_tree+0x26e/0x4a0 [quota_tree]
 do_insert_tree+0x26e/0x4a0 [quota_tree]
 qtree_write_dquot+0x70/0x190 [quota_tree]
 v2_write_dquot+0x43/0x90 [quota_v2]
 dquot_acquire+0x77/0x100
 f2fs_dquot_acquire+0x2f/0x60 [f2fs]
 dqget+0x310/0x450
 dquot_transfer+0x7e/0x120
 f2fs_setattr+0x11a/0x4a0 [f2fs]
 notify_change+0x349/0x480
 chown_common+0x168/0x1c0
 do_fchownat+0xbc/0xf0
 __x64_sys_fchownat+0x20/0x30
 do_syscall_64+0x5f/0x220
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 94caf26901e0b..5e1d4d9243a95 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1826,6 +1826,7 @@ static ssize_t f2fs_quota_write(struct super_block *sb, int type,
 	int offset = off & (sb->s_blocksize - 1);
 	size_t towrite = len;
 	struct page *page;
+	void *fsdata = NULL;
 	char *kaddr;
 	int err = 0;
 	int tocopy;
@@ -1835,7 +1836,7 @@ static ssize_t f2fs_quota_write(struct super_block *sb, int type,
 								towrite);
 retry:
 		err = a_ops->write_begin(NULL, mapping, off, tocopy, 0,
-							&page, NULL);
+							&page, &fsdata);
 		if (unlikely(err)) {
 			if (err == -ENOMEM) {
 				congestion_wait(BLK_RW_ASYNC, HZ/50);
@@ -1851,7 +1852,7 @@ static ssize_t f2fs_quota_write(struct super_block *sb, int type,
 		flush_dcache_page(page);
 
 		a_ops->write_end(NULL, mapping, off, tocopy, tocopy,
-						page, NULL);
+						page, fsdata);
 		offset = 0;
 		towrite -= tocopy;
 		off += tocopy;
-- 
2.20.1

[PATCH 5.4 084/118] ACPICA: Fixes for acpiExec namespace init file

[Greg Kroah-Hartman]

From: Bob Moore <robert.moore@intel.com>

[ Upstream commit 9a1ae80412dcaa67a29eecf19de44f32b5f1c357 ]

This is the result of squashing the following ACPICA commit ID's:
6803997e5b4f3635cea6610b51ff69e29d251de3
f31cdf8bfda22fe265c1a176d0e33d311c82a7f7

This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.

Link: https://github.com/acpica/acpica/commit/f31cdf8b
Link: https://github.com/acpica/acpica/commit/6803997e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/acnamesp.h |  2 ++
 drivers/acpi/acpica/dbinput.c  | 16 +++++++---------
 drivers/acpi/acpica/dswexec.c  | 33 ++++++++++++++++++++++++++++++++
 drivers/acpi/acpica/dswload.c  |  2 --
 drivers/acpi/acpica/dswload2.c | 35 ++++++++++++++++++++++++++++++++++
 drivers/acpi/acpica/nsnames.c  |  6 +-----
 drivers/acpi/acpica/utdelete.c |  9 +++++----
 7 files changed, 83 insertions(+), 20 deletions(-)

diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 7da1864798a0e..ecaa28733dc61 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -256,6 +256,8 @@ u32
 acpi_ns_build_normalized_path(struct acpi_namespace_node *node,
 			      char *full_path, u32 path_size, u8 no_trailing);
 
+void acpi_ns_normalize_pathname(char *original_path);
+
 char *acpi_ns_get_normalized_pathname(struct acpi_namespace_node *node,
 				      u8 no_trailing);
 
diff --git a/drivers/acpi/acpica/dbinput.c b/drivers/acpi/acpica/dbinput.c
index 55a7e10998d87..1ef053585bbb8 100644
--- a/drivers/acpi/acpica/dbinput.c
+++ b/drivers/acpi/acpica/dbinput.c
@@ -464,16 +464,14 @@ char *acpi_db_get_next_token(char *string,
 		return (NULL);
 	}
 
-	/* Remove any spaces at the beginning */
+	/* Remove any spaces at the beginning, ignore blank lines */
 
-	if (*string == ' ') {
-		while (*string && (*string == ' ')) {
-			string++;
-		}
+	while (*string && isspace(*string)) {
+		string++;
+	}
 
-		if (!(*string)) {
-			return (NULL);
-		}
+	if (!(*string)) {
+		return (NULL);
 	}
 
 	switch (*string) {
@@ -551,7 +549,7 @@ char *acpi_db_get_next_token(char *string,
 
 		/* Find end of token */
 
-		while (*string && (*string != ' ')) {
+		while (*string && !isspace(*string)) {
 			string++;
 		}
 		break;
diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c
index d75aae3045958..a68237b97c4c8 100644
--- a/drivers/acpi/acpica/dswexec.c
+++ b/drivers/acpi/acpica/dswexec.c
@@ -16,6 +16,9 @@
 #include "acinterp.h"
 #include "acnamesp.h"
 #include "acdebug.h"
+#ifdef ACPI_EXEC_APP
+#include "aecommon.h"
+#endif
 
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dswexec")
@@ -329,6 +332,10 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 	u32 op_class;
 	union acpi_parse_object *next_op;
 	union acpi_parse_object *first_arg;
+#ifdef ACPI_EXEC_APP
+	char *namepath;
+	union acpi_operand_object *obj_desc;
+#endif
 
 	ACPI_FUNCTION_TRACE_PTR(ds_exec_end_op, walk_state);
 
@@ -537,6 +544,32 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 
 			status =
 			    acpi_ds_eval_buffer_field_operands(walk_state, op);
+			if (ACPI_FAILURE(status)) {
+				break;
+			}
+#ifdef ACPI_EXEC_APP
+			/*
+			 * acpi_exec support for namespace initialization file (initialize
+			 * buffer_fields in this code.)
+			 */
+			namepath =
+			    acpi_ns_get_external_pathname(op->common.node);
+			status = ae_lookup_init_file_entry(namepath, &obj_desc);
+			if (ACPI_SUCCESS(status)) {
+				status =
+				    acpi_ex_write_data_to_field(obj_desc,
+								op->common.
+								node->object,
+								NULL);
+				if ACPI_FAILURE
+					(status) {
+					ACPI_EXCEPTION((AE_INFO, status,
+							"While writing to buffer field"));
+					}
+			}
+			ACPI_FREE(namepath);
+			status = AE_OK;
+#endif
 			break;
 
 		case AML_TYPE_CREATE_OBJECT:
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c
index 4bcf15bf03ded..6cf93fae4d07f 100644
--- a/drivers/acpi/acpica/dswload.c
+++ b/drivers/acpi/acpica/dswload.c
@@ -14,7 +14,6 @@
 #include "acdispat.h"
 #include "acinterp.h"
 #include "acnamesp.h"
-
 #ifdef ACPI_ASL_COMPILER
 #include "acdisasm.h"
 #endif
@@ -399,7 +398,6 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
 	union acpi_parse_object *op;
 	acpi_object_type object_type;
 	acpi_status status = AE_OK;
-
 #ifdef ACPI_ASL_COMPILER
 	u8 param_count;
 #endif
diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
index 935a8e2623e4b..15d92bf15f0b6 100644
--- a/drivers/acpi/acpica/dswload2.c
+++ b/drivers/acpi/acpica/dswload2.c
@@ -15,6 +15,9 @@
 #include "acinterp.h"
 #include "acnamesp.h"
 #include "acevents.h"
+#ifdef ACPI_EXEC_APP
+#include "aecommon.h"
+#endif
 
 #define _COMPONENT          ACPI_DISPATCHER
 ACPI_MODULE_NAME("dswload2")
@@ -373,6 +376,10 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 	struct acpi_namespace_node *new_node;
 	u32 i;
 	u8 region_space;
+#ifdef ACPI_EXEC_APP
+	union acpi_operand_object *obj_desc;
+	char *namepath;
+#endif
 
 	ACPI_FUNCTION_TRACE(ds_load2_end_op);
 
@@ -466,6 +473,11 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 		 * be evaluated later during the execution phase
 		 */
 		status = acpi_ds_create_buffer_field(op, walk_state);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"CreateBufferField failure"));
+			goto cleanup;
+			}
 		break;
 
 	case AML_TYPE_NAMED_FIELD:
@@ -604,6 +616,29 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 		case AML_NAME_OP:
 
 			status = acpi_ds_create_node(walk_state, node, op);
+			if (ACPI_FAILURE(status)) {
+				goto cleanup;
+			}
+#ifdef ACPI_EXEC_APP
+			/*
+			 * acpi_exec support for namespace initialization file (initialize
+			 * Name opcodes in this code.)
+			 */
+			namepath = acpi_ns_get_external_pathname(node);
+			status = ae_lookup_init_file_entry(namepath, &obj_desc);
+			if (ACPI_SUCCESS(status)) {
+
+				/* Detach any existing object, attach new object */
+
+				if (node->object) {
+					acpi_ns_detach_object(node);
+				}
+				acpi_ns_attach_object(node, obj_desc,
+						      obj_desc->common.type);
+			}
+			ACPI_FREE(namepath);
+			status = AE_OK;
+#endif
 			break;
 
 		case AML_METHOD_OP:
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 370bbc8677453..c717fff7d9b57 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -13,9 +13,6 @@
 #define _COMPONENT          ACPI_NAMESPACE
 ACPI_MODULE_NAME("nsnames")
 
-/* Local Prototypes */
-static void acpi_ns_normalize_pathname(char *original_path);
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ns_get_external_pathname
@@ -30,7 +27,6 @@ static void acpi_ns_normalize_pathname(char *original_path);
  *              for error and debug statements.
  *
  ******************************************************************************/
-
 char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 {
 	char *name_buffer;
@@ -411,7 +407,7 @@ char *acpi_ns_build_prefixed_pathname(union acpi_generic_state *prefix_scope,
  *
  ******************************************************************************/
 
-static void acpi_ns_normalize_pathname(char *original_path)
+void acpi_ns_normalize_pathname(char *original_path)
 {
 	char *input_path = original_path;
 	char *new_path_buffer;
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index eee263cb7beb0..c365faf4e6cd4 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -452,13 +452,13 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
  *
  * FUNCTION:    acpi_ut_update_object_reference
  *
- * PARAMETERS:  object              - Increment ref count for this object
- *                                    and all sub-objects
+ * PARAMETERS:  object              - Increment or decrement the ref count for
+ *                                    this object and all sub-objects
  *              action              - Either REF_INCREMENT or REF_DECREMENT
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Increment the object reference count
+ * DESCRIPTION: Increment or decrement the object reference count
  *
  * Object references are incremented when:
  * 1) An object is attached to a Node (namespace object)
@@ -492,7 +492,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 		}
 
 		/*
-		 * All sub-objects must have their reference count incremented
+		 * All sub-objects must have their reference count updated
 		 * also. Different object types have different subobjects.
 		 */
 		switch (object->common.type) {
@@ -559,6 +559,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
 					break;
 				}
 			}
+
 			next_object = NULL;
 			break;
 
-- 
2.20.1

[PATCH 5.4 085/118] um: falloc.h needs to be directly included for older libc

[Greg Kroah-Hartman]

From: Alan Maguire <alan.maguire@oracle.com>

[ Upstream commit 35f3401317a3b26aa01fde8facfd320f2628fdcc ]

When building UML with glibc 2.17 installed, compilation
of arch/um/os-Linux/file.c fails due to failure to find
FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions.

It appears that /usr/include/bits/fcntl-linux.h (indirectly
included by /usr/include/fcntl.h) does not include falloc.h
with an older glibc, whereas a more up-to-date version
does.

Adding the direct include to file.c resolves the issue
and does not cause problems for more recent glibc.

Fixes: 50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver")
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/os-Linux/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 5133e3afb96f7..3996937e2c0dd 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -8,6 +8,7 @@
 #include <errno.h>
 #include <fcntl.h>
 #include <signal.h>
+#include <linux/falloc.h>
 #include <sys/ioctl.h>
 #include <sys/mount.h>
 #include <sys/socket.h>
-- 
2.20.1

[PATCH 5.4 086/118] drm/vc4: Fix HDMI mode validation

[Greg Kroah-Hartman]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit b1e7396a1d0e6af6806337fdaaa44098d6b3343c ]

Current mode validation impedes setting up some video modes which should
be supported otherwise. Namely 1920x1200@60Hz.

Fix this by lowering the minimum HDMI state machine clock to pixel clock
ratio allowed.

Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 0853b980bcb31..d5f5ba4105241 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -681,11 +681,23 @@ static enum drm_mode_status
 vc4_hdmi_encoder_mode_valid(struct drm_encoder *crtc,
 			    const struct drm_display_mode *mode)
 {
-	/* HSM clock must be 108% of the pixel clock.  Additionally,
-	 * the AXI clock needs to be at least 25% of pixel clock, but
-	 * HSM ends up being the limiting factor.
+	/*
+	 * As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
+	 * be faster than pixel clock, infinitesimally faster, tested in
+	 * simulation. Otherwise, exact value is unimportant for HDMI
+	 * operation." This conflicts with bcm2835's vc4 documentation, which
+	 * states HSM's clock has to be at least 108% of the pixel clock.
+	 *
+	 * Real life tests reveal that vc4's firmware statement holds up, and
+	 * users are able to use pixel clocks closer to HSM's, namely for
+	 * 1920x1200@60Hz. So it was decided to have leave a 1% margin between
+	 * both clocks. Which, for RPi0-3 implies a maximum pixel clock of
+	 * 162MHz.
+	 *
+	 * Additionally, the AXI clock needs to be at least 25% of
+	 * pixel clock, but HSM ends up being the limiting factor.
 	 */
-	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 108 / 100))
+	if (mode->clock > HSM_CLOCK_FREQ / (1000 * 101 / 100))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
-- 
2.20.1

[PATCH 5.4 087/118] iommu/virtio: Fix freeing of incomplete domains

[Greg Kroah-Hartman]

From: Jean-Philippe Brucker <jean-philippe@linaro.org>

[ Upstream commit 7062af3ed2ba451029e3733d9f677c68f5ea9e77 ]

Calling viommu_domain_free() on a domain that hasn't been finalised (not
attached to any device, for example) can currently cause an Oops,
because we attempt to call ida_free() on ID 0, which may either be
unallocated or used by another domain.

Only initialise the vdomain->viommu pointer, which denotes a finalised
domain, at the end of a successful viommu_domain_finalise().

Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/virtio-iommu.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index 3ea9d76829995..6c340a4f4fd28 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -614,18 +614,20 @@ static int viommu_domain_finalise(struct viommu_dev *viommu,
 	int ret;
 	struct viommu_domain *vdomain = to_viommu_domain(domain);
 
-	vdomain->viommu		= viommu;
-	vdomain->map_flags	= viommu->map_flags;
+	ret = ida_alloc_range(&viommu->domain_ids, viommu->first_domain,
+			      viommu->last_domain, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	vdomain->id		= (unsigned int)ret;
 
 	domain->pgsize_bitmap	= viommu->pgsize_bitmap;
 	domain->geometry	= viommu->geometry;
 
-	ret = ida_alloc_range(&viommu->domain_ids, viommu->first_domain,
-			      viommu->last_domain, GFP_KERNEL);
-	if (ret >= 0)
-		vdomain->id = (unsigned int)ret;
+	vdomain->map_flags	= viommu->map_flags;
+	vdomain->viommu		= viommu;
 
-	return ret > 0 ? 0 : ret;
+	return 0;
 }
 
 static void viommu_domain_free(struct iommu_domain *domain)
-- 
2.20.1

[PATCH 5.4 088/118] iommu/vt-d: Fix mm reference leak

[Greg Kroah-Hartman]

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

[ Upstream commit 902baf61adf6b187f0a6b789e70d788ea71ff5bc ]

Move canonical address check before mmget_not_zero() to avoid mm
reference leak.

Fixes: 9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel-svm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index 518d0b2d12afd..3020506180c10 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -583,14 +583,15 @@ static irqreturn_t prq_event_thread(int irq, void *d)
 		 * any faults on kernel addresses. */
 		if (!svm->mm)
 			goto bad_req;
-		/* If the mm is already defunct, don't handle faults. */
-		if (!mmget_not_zero(svm->mm))
-			goto bad_req;
 
 		/* If address is not canonical, return invalid response */
 		if (!is_canonical_address(address))
 			goto bad_req;
 
+		/* If the mm is already defunct, don't handle faults. */
+		if (!mmget_not_zero(svm->mm))
+			goto bad_req;
+
 		down_read(&svm->mm->mmap_sem);
 		vma = find_extend_vma(svm->mm, address);
 		if (!vma || address < vma->vm_start)
-- 
2.20.1

[PATCH 5.4 089/118] SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsize

[Greg Kroah-Hartman]

From: Olga Kornievskaia <olga.kornievskaia@gmail.com>

[ Upstream commit df513a7711712758b9cb1a48d86712e7e1ee03f4 ]

Ever since commit 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing
reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It
used to use au_cslack value which was nice and large and changed it to
au_rslack value which turns out to be too small.

Since 5.1, v3 mount with sec=krb5p fails against an Ontap server
because client's receive buffer it too small.

For gss krb5p, we need to account for the mic token in the verifier,
and the wrap token in the wrap token.

RFC 4121 defines:
mic token
Octet no   Name        Description
         --------------------------------------------------------------
         0..1     TOK_ID     Identification field.  Tokens emitted by
                             GSS_GetMIC() contain the hex value 04 04
                             expressed in big-endian order in this
                             field.
         2        Flags      Attributes field, as described in section
                             4.2.2.
         3..7     Filler     Contains five octets of hex value FF.
         8..15    SND_SEQ    Sequence number field in clear text,
                             expressed in big-endian order.
         16..last SGN_CKSUM  Checksum of the "to-be-signed" data and
                             octet 0..15, as described in section 4.2.4.

that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum

wrap token
Octet no   Name        Description
         --------------------------------------------------------------
          0..1     TOK_ID    Identification field.  Tokens emitted by
                             GSS_Wrap() contain the hex value 05 04
                             expressed in big-endian order in this
                             field.
          2        Flags     Attributes field, as described in section
                             4.2.2.
          3        Filler    Contains the hex value FF.
          4..5     EC        Contains the "extra count" field, in big-
                             endian order as described in section 4.2.3.
          6..7     RRC       Contains the "right rotation count" in big-
                             endian order, as described in section
                             4.2.5.
          8..15    SND_SEQ   Sequence number field in clear text,
                             expressed in big-endian order.
          16..last Data      Encrypted data for Wrap tokens with
                             confidentiality, or plaintext data followed
                             by the checksum for Wrap tokens without
                             confidentiality, as described in section
                             4.2.4.

Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum
(other things like padding)

RFC 3961 defines known cksum sizes:
Checksum type              sumtype        checksum         section or
                                value            size         reference
   ---------------------------------------------------------------------
   CRC32                            1               4           6.1.3
   rsa-md4                          2              16           6.1.2
   rsa-md4-des                      3              24           6.2.5
   des-mac                          4              16           6.2.7
   des-mac-k                        5               8           6.2.8
   rsa-md4-des-k                    6              16           6.2.6
   rsa-md5                          7              16           6.1.1
   rsa-md5-des                      8              24           6.2.4
   rsa-md5-des3                     9              24             ??
   sha1 (unkeyed)                  10              20             ??
   hmac-sha1-des3-kd               12              20            6.3
   hmac-sha1-des3                  13              20             ??
   sha1 (unkeyed)                  14              20             ??
   hmac-sha1-96-aes128             15              20         [KRB5-AES]
   hmac-sha1-96-aes256             16              20         [KRB5-AES]
   [reserved]                  0x8003               ?         [GSS-KRB5]

Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes.
(GSS_KRB5_MAX_CKSUM_LEN)

Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used
for encoding the gss_wrap tokens (same tokens are used in reply).

Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/auth_gss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index d75fddca44c94..f9e1a7e61eda0 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -20,6 +20,7 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/auth.h>
 #include <linux/sunrpc/auth_gss.h>
+#include <linux/sunrpc/gss_krb5.h>
 #include <linux/sunrpc/svcauth_gss.h>
 #include <linux/sunrpc/gss_err.h>
 #include <linux/workqueue.h>
@@ -1050,7 +1051,7 @@ gss_create_new(const struct rpc_auth_create_args *args, struct rpc_clnt *clnt)
 		goto err_put_mech;
 	auth = &gss_auth->rpc_auth;
 	auth->au_cslack = GSS_CRED_SLACK >> 2;
-	auth->au_rslack = GSS_VERF_SLACK >> 2;
+	auth->au_rslack = GSS_KRB5_MAX_SLACK_NEEDED >> 2;
 	auth->au_verfsize = GSS_VERF_SLACK >> 2;
 	auth->au_ralign = GSS_VERF_SLACK >> 2;
 	auth->au_flags = 0;
-- 
2.20.1

[PATCH 5.4 090/118] ext2: fix empty body warnings when -Wextra is used

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 44a52022e7f15cbaab957df1c14f7a4f527ef7cf ]

When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros
to use the no_printk() macro instead of <nothing>.
This fixes gcc warnings when -Wextra is used:

../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]

I have verified that the only object code change (with gcc 7.5.0) is
the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.

Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext2/xattr.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 0456bc990b5ee..b91f99d9482e9 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -56,6 +56,7 @@
 
 #include <linux/buffer_head.h>
 #include <linux/init.h>
+#include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/mbcache.h>
 #include <linux/quotaops.h>
@@ -84,8 +85,8 @@
 		printk("\n"); \
 	} while (0)
 #else
-# define ea_idebug(f...)
-# define ea_bdebug(f...)
+# define ea_idebug(inode, f...)	no_printk(f)
+# define ea_bdebug(bh, f...)	no_printk(f)
 #endif
 
 static int ext2_xattr_set2(struct inode *, struct buffer_head *,
-- 
2.20.1

[PATCH 5.4 091/118] iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()

[Greg Kroah-Hartman]

From: Qian Cai <cai@lca.pw>

[ Upstream commit c6f4ebdeba4cff590594df931ff1ee610c426431 ]

dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read
side critical section but with dmar_global_lock held. Silence this
false positive.

 drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!!
 1 lock held by swapper/0/1:
 #0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19

 Call Trace:
  dump_stack+0xa4/0xfe
  lockdep_rcu_suspicious+0xeb/0xf5
  dmar_find_atsr+0x1ab/0x1c0
  dmar_parse_one_atsr+0x64/0x220
  dmar_walk_remapping_entries+0x130/0x380
  dmar_table_init+0x166/0x243
  intel_iommu_init+0x1ab/0xe19
  pci_iommu_init+0x1a/0x44
  do_one_initcall+0xae/0x4d0
  kernel_init_freeable+0x412/0x4c5
  kernel_init+0x19/0x193

Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 0d922eeae3579..773ac2b0d6068 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4335,7 +4335,8 @@ static struct dmar_atsr_unit *dmar_find_atsr(struct acpi_dmar_atsr *atsr)
 	struct dmar_atsr_unit *atsru;
 	struct acpi_dmar_atsr *tmp;
 
-	list_for_each_entry_rcu(atsru, &dmar_atsr_units, list) {
+	list_for_each_entry_rcu(atsru, &dmar_atsr_units, list,
+				dmar_rcu_check()) {
 		tmp = (struct acpi_dmar_atsr *)atsru->hdr;
 		if (atsr->segment != tmp->segment)
 			continue;
-- 
2.20.1

[PATCH 5.4 092/118] iommu/vt-d: Fix page request descriptor size

[Greg Kroah-Hartman]

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

[ Upstream commit 52355fb1919ef7ed9a38e0f3de6e928de1f57217 ]

Intel VT-d might support PRS (Page Reqest Support) when it's
running in the scalable mode. Each page request descriptor
occupies 32 bytes and is 32-bytes aligned. The page request
descriptor offset mask should be 32-bytes aligned.

Fixes: 5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel-svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index 3020506180c10..1d3816cd65d57 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -502,7 +502,7 @@ struct page_req_dsc {
 	u64 priv_data[2];
 };
 
-#define PRQ_RING_MASK ((0x1000 << PRQ_ORDER) - 0x10)
+#define PRQ_RING_MASK	((0x1000 << PRQ_ORDER) - 0x20)
 
 static bool access_error(struct vm_area_struct *vma, struct page_req_dsc *req)
 {
-- 
2.20.1

[PATCH 5.4 093/118] ext2: fix debug reference to ext2_xattr_cache

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 32302085a8d90859c40cf1a5e8313f575d06ec75 ]

Fix a debug-only build error in ext2/xattr.c:

When building without extra debugging, (and with another patch that uses
no_printk() instead of <empty> for the ext2-xattr debug-print macros,
this build error happens:

../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’:
../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in
this function); did you mean ‘ext2_xattr_list’?
     atomic_read(&ext2_xattr_cache->c_entry_count));

Fix the problem by removing cached entry count from the debug message
since otherwise we'd have to export the mbcache structure just for that.

Fixes: be0726d33cb8 ("ext2: convert to mbcache2")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext2/xattr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index b91f99d9482e9..62acbe27d8bf4 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -865,8 +865,7 @@ ext2_xattr_cache_insert(struct mb_cache *cache, struct buffer_head *bh)
 				      true);
 	if (error) {
 		if (error == -EBUSY) {
-			ea_bdebug(bh, "already in cache (%d cache entries)",
-				atomic_read(&ext2_xattr_cache->c_entry_count));
+			ea_bdebug(bh, "already in cache");
 			error = 0;
 		}
 	} else
-- 
2.20.1

[PATCH 5.4 094/118] sunrpc: Fix gss_unwrap_resp_integ() again

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 4047aa909c4a40fceebc36fff708d465a4d3c6e2 ]

xdr_buf_read_mic() tries to find unused contiguous space in a
received xdr_buf in order to linearize the checksum for the call
to gss_verify_mic. However, the corner cases in this code are
numerous and we seem to keep missing them. I've just hit yet
another buffer overrun related to it.

This overrun is at the end of xdr_buf_read_mic():

1284         if (buf->tail[0].iov_len != 0)
1285                 mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len;
1286         else
1287                 mic->data = buf->head[0].iov_base + buf->head[0].iov_len;
1288         __read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len);
1289         return 0;

This logic assumes the transport has set the length of the tail
based on the size of the received message. base + len is then
supposed to be off the end of the message but still within the
actual buffer.

In fact, the length of the tail is set by the upper layer when the
Call is encoded so that the end of the tail is actually the end of
the allocated buffer itself. This causes the logic above to set
mic->data to point past the end of the receive buffer.

The "mic->data = head" arm of this if statement is no less fragile.

As near as I can tell, this has been a problem forever. I'm not sure
that minimizing au_rslack recently changed this pathology much.

So instead, let's use a more straightforward approach: kmalloc a
separate buffer to linearize the checksum. This is similar to
how gss_validate() currently works.

Coming back to this code, I had some trouble understanding what
was going on. So I've cleaned up the variable naming and added
a few comments that point back to the XDR definition in RFC 2203
to help guide future spelunkers, including myself.

As an added clean up, the functionality that was in
xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(),
as that is its only caller.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/auth_gss.c | 77 +++++++++++++++++++++++++---------
 1 file changed, 58 insertions(+), 19 deletions(-)

diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index f9e1a7e61eda0..ff5fcb3e12084 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1935,35 +1935,69 @@ gss_unwrap_resp_auth(struct rpc_cred *cred)
 	return 0;
 }
 
+/*
+ * RFC 2203, Section 5.3.2.2
+ *
+ *	struct rpc_gss_integ_data {
+ *		opaque databody_integ<>;
+ *		opaque checksum<>;
+ *	};
+ *
+ *	struct rpc_gss_data_t {
+ *		unsigned int seq_num;
+ *		proc_req_arg_t arg;
+ *	};
+ */
 static int
 gss_unwrap_resp_integ(struct rpc_task *task, struct rpc_cred *cred,
 		      struct gss_cl_ctx *ctx, struct rpc_rqst *rqstp,
 		      struct xdr_stream *xdr)
 {
-	struct xdr_buf integ_buf, *rcv_buf = &rqstp->rq_rcv_buf;
-	u32 data_offset, mic_offset, integ_len, maj_stat;
+	struct xdr_buf gss_data, *rcv_buf = &rqstp->rq_rcv_buf;
 	struct rpc_auth *auth = cred->cr_auth;
+	u32 len, offset, seqno, maj_stat;
 	struct xdr_netobj mic;
-	__be32 *p;
+	int ret;
 
-	p = xdr_inline_decode(xdr, 2 * sizeof(*p));
-	if (unlikely(!p))
+	ret = -EIO;
+	mic.data = NULL;
+
+	/* opaque databody_integ<>; */
+	if (xdr_stream_decode_u32(xdr, &len))
 		goto unwrap_failed;
-	integ_len = be32_to_cpup(p++);
-	if (integ_len & 3)
+	if (len & 3)
 		goto unwrap_failed;
-	data_offset = (u8 *)(p) - (u8 *)rcv_buf->head[0].iov_base;
-	mic_offset = integ_len + data_offset;
-	if (mic_offset > rcv_buf->len)
+	offset = rcv_buf->len - xdr_stream_remaining(xdr);
+	if (xdr_stream_decode_u32(xdr, &seqno))
 		goto unwrap_failed;
-	if (be32_to_cpup(p) != rqstp->rq_seqno)
+	if (seqno != rqstp->rq_seqno)
 		goto bad_seqno;
+	if (xdr_buf_subsegment(rcv_buf, &gss_data, offset, len))
+		goto unwrap_failed;
 
-	if (xdr_buf_subsegment(rcv_buf, &integ_buf, data_offset, integ_len))
+	/*
+	 * The xdr_stream now points to the beginning of the
+	 * upper layer payload, to be passed below to
+	 * rpcauth_unwrap_resp_decode(). The checksum, which
+	 * follows the upper layer payload in @rcv_buf, is
+	 * located and parsed without updating the xdr_stream.
+	 */
+
+	/* opaque checksum<>; */
+	offset += len;
+	if (xdr_decode_word(rcv_buf, offset, &len))
+		goto unwrap_failed;
+	offset += sizeof(__be32);
+	if (offset + len > rcv_buf->len)
 		goto unwrap_failed;
-	if (xdr_buf_read_mic(rcv_buf, &mic, mic_offset))
+	mic.len = len;
+	mic.data = kmalloc(len, GFP_NOFS);
+	if (!mic.data)
+		goto unwrap_failed;
+	if (read_bytes_from_xdr_buf(rcv_buf, offset, mic.data, mic.len))
 		goto unwrap_failed;
-	maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &integ_buf, &mic);
+
+	maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &gss_data, &mic);
 	if (maj_stat == GSS_S_CONTEXT_EXPIRED)
 		clear_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags);
 	if (maj_stat != GSS_S_COMPLETE)
@@ -1971,16 +2005,21 @@ gss_unwrap_resp_integ(struct rpc_task *task, struct rpc_cred *cred,
 
 	auth->au_rslack = auth->au_verfsize + 2 + 1 + XDR_QUADLEN(mic.len);
 	auth->au_ralign = auth->au_verfsize + 2;
-	return 0;
+	ret = 0;
+
+out:
+	kfree(mic.data);
+	return ret;
+
 unwrap_failed:
 	trace_rpcgss_unwrap_failed(task);
-	return -EIO;
+	goto out;
 bad_seqno:
-	trace_rpcgss_bad_seqno(task, rqstp->rq_seqno, be32_to_cpup(p));
-	return -EIO;
+	trace_rpcgss_bad_seqno(task, rqstp->rq_seqno, seqno);
+	goto out;
 bad_mic:
 	trace_rpcgss_verify_mic(task, maj_stat);
-	return -EIO;
+	goto out;
 }
 
 static int
-- 
2.20.1

[PATCH 5.4 095/118] csky: Fixup init_fpu compile warning with __init

[Greg Kroah-Hartman]

From: Guo Ren <guoren@linux.alibaba.com>

[ Upstream commit 12879bda3c2a974b7e4fe199a9c21f0c5f6bca04 ]

WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the
function csky_start_secondary() to the function .init.text:init_fpu()

The function csky_start_secondary() references
the function __init init_fpu().
This is often because csky_start_secondary lacks a __init
annotation or the annotation of init_fpu is wrong.

Reported-by: Lu Chongzhi <chongzhi.lcz@alibaba-inc.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/csky/abiv2/fpu.c         | 5 -----
 arch/csky/abiv2/inc/abi/fpu.h | 3 ++-
 arch/csky/kernel/smp.c        | 3 +++
 3 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/csky/abiv2/fpu.c b/arch/csky/abiv2/fpu.c
index 86d187d4e5af1..5acc5c2e544e1 100644
--- a/arch/csky/abiv2/fpu.c
+++ b/arch/csky/abiv2/fpu.c
@@ -10,11 +10,6 @@
 #define MTCR_DIST	0xC0006420
 #define MFCR_DIST	0xC0006020
 
-void __init init_fpu(void)
-{
-	mtcr("cr<1, 2>", 0);
-}
-
 /*
  * fpu_libc_helper() is to help libc to excute:
  *  - mfcr %a, cr<1, 2>
diff --git a/arch/csky/abiv2/inc/abi/fpu.h b/arch/csky/abiv2/inc/abi/fpu.h
index 22ca3cf2794a1..09e2700a36936 100644
--- a/arch/csky/abiv2/inc/abi/fpu.h
+++ b/arch/csky/abiv2/inc/abi/fpu.h
@@ -9,7 +9,8 @@
 
 int fpu_libc_helper(struct pt_regs *regs);
 void fpu_fpe(struct pt_regs *regs);
-void __init init_fpu(void);
+
+static inline void init_fpu(void) { mtcr("cr<1, 2>", 0); }
 
 void save_to_user_fp(struct user_fp *user_fp);
 void restore_from_user_fp(struct user_fp *user_fp);
diff --git a/arch/csky/kernel/smp.c b/arch/csky/kernel/smp.c
index de61feb4b6df2..b5c5bc3afeb5c 100644
--- a/arch/csky/kernel/smp.c
+++ b/arch/csky/kernel/smp.c
@@ -22,6 +22,9 @@
 #include <asm/sections.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
+#ifdef CONFIG_CPU_HAS_FPU
+#include <abi/fpu.h>
+#endif
 
 struct ipi_data_struct {
 	unsigned long bits ____cacheline_aligned;
-- 
2.20.1

[PATCH 5.4 096/118] power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks.

[Greg Kroah-Hartman]

From: Jeffery Miller <jmiller@neverware.com>

[ Upstream commit e42fe5b29ac07210297e75f36deefe54edbdbf80 ]

The Intel Compute Stick `STK1A32SC` can have a system vendor of
"Intel(R) Client Systems".
Broaden the Intel Compute Stick DMI checks so that they match "Intel
Corporation" as well as "Intel(R) Client Systems".

This fixes an issue where the STK1A32SC compute sticks were still
exposing a battery with the existing blacklist entry.

Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/axp288_fuel_gauge.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index e1bc4e6e6f30e..f40fa0e63b6e5 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -706,14 +706,14 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 	{
 		/* Intel Cherry Trail Compute Stick, Windows version */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1AW32SC"),
 		},
 	},
 	{
 		/* Intel Cherry Trail Compute Stick, version without an OS */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
 		},
 	},
-- 
2.20.1

[PATCH 5.4 097/118] libnvdimm: Out of bounds read in __nd_ioctl()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f84afbdd3a9e5e10633695677b95422572f920dc ]

The "cmd" comes from the user and it can be up to 255.  It it's more
than the number of bits in long, it results out of bounds read when we
check test_bit(cmd, &cmd_mask).  The highest valid value for "cmd" is
ND_CMD_CALL (10) so I added a compare against that.

Fixes: 62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/bus.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index d47412dcdf38d..5e5c6aafc070b 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -1010,8 +1010,10 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
 			return -EFAULT;
 	}
 
-	if (!desc || (desc->out_num + desc->in_num == 0) ||
-			!test_bit(cmd, &cmd_mask))
+	if (!desc ||
+	    (desc->out_num + desc->in_num == 0) ||
+	    cmd > ND_CMD_CALL ||
+	    !test_bit(cmd, &cmd_mask))
 		return -ENOTTY;
 
 	/* fail write commands (when read-only) */
-- 
2.20.1

[PATCH 5.4 098/118] iommu/amd: Fix the configuration of GCR3 table root pointer

[Greg Kroah-Hartman]

From: Adrian Huang <ahuang12@lenovo.com>

[ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ]

The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.

Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index daeabd98c60e2..0679896b9e2e1 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -348,7 +348,7 @@
 
 #define DTE_GCR3_VAL_A(x)	(((x) >> 12) & 0x00007ULL)
 #define DTE_GCR3_VAL_B(x)	(((x) >> 15) & 0x0ffffULL)
-#define DTE_GCR3_VAL_C(x)	(((x) >> 31) & 0xfffffULL)
+#define DTE_GCR3_VAL_C(x)	(((x) >> 31) & 0x1fffffULL)
 
 #define DTE_GCR3_INDEX_A	0
 #define DTE_GCR3_INDEX_B	1
-- 
2.20.1

[PATCH 5.4 099/118] f2fs: fix to wait all node page writeback

[Greg Kroah-Hartman]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit dc5a941223edd803f476a153abd950cc3a83c3e1 ]

There is a race condition that we may miss to wait for all node pages
writeback, fix it.

- fsync()				- shrink
 - f2fs_do_sync_file
					 - __write_node_page
					  - set_page_writeback(page#0)
					  : remove DIRTY/TOWRITE flag
  - f2fs_fsync_node_pages
  : won't find page #0 as TOWRITE flag was removeD
  - f2fs_wait_on_node_pages_writeback
  : wont' wait page #0 writeback as it was not in fsync_node_list list.
					   - f2fs_add_fsync_node_entry

Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/node.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 8b66bc4c004b6..f14401a77d601 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -1562,15 +1562,16 @@ static int __write_node_page(struct page *page, bool atomic, bool *submitted,
 	if (atomic && !test_opt(sbi, NOBARRIER))
 		fio.op_flags |= REQ_PREFLUSH | REQ_FUA;
 
-	set_page_writeback(page);
-	ClearPageError(page);
-
+	/* should add to global list before clearing PAGECACHE status */
 	if (f2fs_in_warm_node_list(sbi, page)) {
 		seq = f2fs_add_fsync_node_entry(sbi, page);
 		if (seq_id)
 			*seq_id = seq;
 	}
 
+	set_page_writeback(page);
+	ClearPageError(page);
+
 	fio.old_blkaddr = ni.blk_addr;
 	f2fs_do_write_node_page(nid, &fio);
 	set_node_addr(sbi, &ni, fio.new_blkaddr, is_fsync_dnode(page));
-- 
2.20.1

[PATCH 5.4 100/118] drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init

[Greg Kroah-Hartman]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 028a12f5aa829b4ba6ac011530b815eda4960e89 ]

Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.

The first tell-tale symptom of this issue is:

nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]

appearing in dmesg, likely followed by many other failures being logged.

Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far.  I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/nouveau/nvkm/engine/gr/gf100.c    | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
index c578deb5867a8..c71606a45d1de 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
@@ -1988,8 +1988,34 @@ gf100_gr_init_(struct nvkm_gr *base)
 {
 	struct gf100_gr *gr = gf100_gr(base);
 	struct nvkm_subdev *subdev = &base->engine.subdev;
+	struct nvkm_device *device = subdev->device;
+	bool reset = device->chipset == 0x137 || device->chipset == 0x138;
 	u32 ret;
 
+	/* On certain GP107/GP108 boards, we trigger a weird issue where
+	 * GR will stop responding to PRI accesses after we've asked the
+	 * SEC2 RTOS to boot the GR falcons.  This happens with far more
+	 * frequency when cold-booting a board (ie. returning from D3).
+	 *
+	 * The root cause for this is not known and has proven difficult
+	 * to isolate, with many avenues being dead-ends.
+	 *
+	 * A workaround was discovered by Karol, whereby putting GR into
+	 * reset for an extended period right before initialisation
+	 * prevents the problem from occuring.
+	 *
+	 * XXX: As RM does not require any such workaround, this is more
+	 *      of a hack than a true fix.
+	 */
+	reset = nvkm_boolopt(device->cfgopt, "NvGrResetWar", reset);
+	if (reset) {
+		nvkm_mask(device, 0x000200, 0x00001000, 0x00000000);
+		nvkm_rd32(device, 0x000200);
+		msleep(50);
+		nvkm_mask(device, 0x000200, 0x00001000, 0x00001000);
+		nvkm_rd32(device, 0x000200);
+	}
+
 	nvkm_pmu_pgob(gr->base.engine.subdev.device->pmu, false);
 
 	ret = nvkm_falcon_get(gr->fecs.falcon, subdev);
-- 
2.20.1

[PATCH 5.4 101/118] net: dsa: bcm_sf2: Fix overflow checks

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit d0802dc411f469569a537283b6f3833af47aece9 upstream.

Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.

The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.

Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/dsa/bcm_sf2_cfp.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -882,17 +882,14 @@ static int bcm_sf2_cfp_rule_set(struct d
 	     fs->m_ext.data[1]))
 		return -EINVAL;
 
-	if (fs->location != RX_CLS_LOC_ANY && fs->location >= CFP_NUM_RULES)
+	if (fs->location != RX_CLS_LOC_ANY &&
+	    fs->location > bcm_sf2_cfp_rule_size(priv))
 		return -EINVAL;
 
 	if (fs->location != RX_CLS_LOC_ANY &&
 	    test_bit(fs->location, priv->cfp.used))
 		return -EBUSY;
 
-	if (fs->location != RX_CLS_LOC_ANY &&
-	    fs->location > bcm_sf2_cfp_rule_size(priv))
-		return -EINVAL;
-
 	ret = bcm_sf2_cfp_rule_cmp(priv, port, fs);
 	if (ret == 0)
 		return -EEXIST;
@@ -973,7 +970,7 @@ static int bcm_sf2_cfp_rule_del(struct b
 	struct cfp_rule *rule;
 	int ret;
 
-	if (loc >= CFP_NUM_RULES)
+	if (loc > bcm_sf2_cfp_rule_size(priv))
 		return -EINVAL;
 
 	/* Refuse deleting unused rules, and those that are not unique since

[PATCH 5.4 102/118] dma-debug: fix displaying of dma allocation type

[Greg Kroah-Hartman]

From: Grygorii Strashko <grygorii.strashko@ti.com>

commit 9bb50ed7470944238ec8e30a94ef096caf9056ee upstream.

The commit 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using
dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update
type2name string table. This causes incorrect displaying of dma allocation
type.
Fix it by removing "page" string from type2name string table and switch to
use named initializers.

Before (dma_alloc_coherent()):
k3-ringacc 4b800000.ringacc: scather-gather idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc 4b800000.ringacc: scather-gather idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable

After:
k3-ringacc 4b800000.ringacc: coherent idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc 4b800000.ringacc: coherent idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable

Fixes: 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/dma/debug.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -137,9 +137,12 @@ static const char *const maperr2str[] =
 	[MAP_ERR_CHECKED] = "dma map error checked",
 };
 
-static const char *type2name[5] = { "single", "page",
-				    "scather-gather", "coherent",
-				    "resource" };
+static const char *type2name[] = {
+	[dma_debug_single] = "single",
+	[dma_debug_sg] = "scather-gather",
+	[dma_debug_coherent] = "coherent",
+	[dma_debug_resource] = "resource",
+};
 
 static const char *dir2name[4] = { "DMA_BIDIRECTIONAL", "DMA_TO_DEVICE",
 				   "DMA_FROM_DEVICE", "DMA_NONE" };

[PATCH 5.4 103/118] fbdev: potential information leak in do_fb_ioctl()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit d3d19d6fc5736a798b118971935ce274f7deaa82 upstream.

The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it.  It depends
on the compiler.  The solution is just to replace the assignment with an
memcpy().

Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/core/fbmem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1110,7 +1110,7 @@ static long do_fb_ioctl(struct fb_info *
 		break;
 	case FBIOGET_FSCREENINFO:
 		lock_fb_info(info);
-		fix = info->fix;
+		memcpy(&fix, &info->fix, sizeof(fix));
 		if (info->flags & FBINFO_HIDE_SMEM_START)
 			fix.smem_start = 0;
 		unlock_fb_info(info);

[PATCH 5.4 104/118] ARM: dts: sunxi: Fix DE2 clocks register range

[Greg Kroah-Hartman]

From: Jernej Skrabec <jernej.skrabec@siol.net>

commit da180322582bd9db07f29e6d4a2d170afde0703f upstream.

As it can be seen from DE2 manual, clock range is 0x10000.

Fix it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline")
Fixes: 05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline")
Fixes: 21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline")
Fixes: d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3")
[wens@csie.org: added fixes tags]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/sun8i-a83t.dtsi  |    2 +-
 arch/arm/boot/dts/sun8i-r40.dtsi   |    2 +-
 arch/arm/boot/dts/sun8i-v3s.dtsi   |    2 +-
 arch/arm/boot/dts/sunxi-h3-h5.dtsi |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -313,7 +313,7 @@
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-a83t-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_PLL_DE>;
 			clock-names = "bus",
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -118,7 +118,7 @@
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-r40-de2-clk",
 				     "allwinner,sun8i-h3-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -105,7 +105,7 @@
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-v3s-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -113,7 +113,7 @@
 
 		display_clocks: clock@1000000 {
 			/* compatible is in per SoC .dtsi file */
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",

[PATCH 5.4 105/118] iio: si1133: read 24-bit signed integer for measurement

[Greg Kroah-Hartman]

From: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>

commit 328b50e9a0ad1fe8accdf8c19923deebab5e0c01 upstream.

The chip is configured in 24 bit mode. The values read from
it must always be treated as is. This fixes the issue by
replacing the previous 16 bits value by a 24 bits buffer.

This changes affects the value output by previous version of
the driver, since the least significant byte was missing.
The upper half of 16 bit values previously output are now
the upper half of a 24 bit value.

Fixes: e01e7eaf37d8 ("iio: light: introduce si1133")

Reported-by: Simon Goyette <simon.goyette@gmail.com>
Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/light/si1133.c |   37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

--- a/drivers/iio/light/si1133.c
+++ b/drivers/iio/light/si1133.c
@@ -102,6 +102,9 @@
 #define SI1133_INPUT_FRACTION_LOW	15
 #define SI1133_LUX_OUTPUT_FRACTION	12
 #define SI1133_LUX_BUFFER_SIZE		9
+#define SI1133_MEASURE_BUFFER_SIZE	3
+
+#define SI1133_SIGN_BIT_INDEX 23
 
 static const int si1133_scale_available[] = {
 	1, 2, 4, 8, 16, 32, 64, 128};
@@ -234,13 +237,13 @@ static const struct si1133_lux_coeff lux
 	}
 };
 
-static int si1133_calculate_polynomial_inner(u32 input, u8 fraction, u16 mag,
+static int si1133_calculate_polynomial_inner(s32 input, u8 fraction, u16 mag,
 					     s8 shift)
 {
 	return ((input << fraction) / mag) << shift;
 }
 
-static int si1133_calculate_output(u32 x, u32 y, u8 x_order, u8 y_order,
+static int si1133_calculate_output(s32 x, s32 y, u8 x_order, u8 y_order,
 				   u8 input_fraction, s8 sign,
 				   const struct si1133_coeff *coeffs)
 {
@@ -276,7 +279,7 @@ static int si1133_calculate_output(u32 x
  * The algorithm is from:
  * https://siliconlabs.github.io/Gecko_SDK_Doc/efm32zg/html/si1133_8c_source.html#l00716
  */
-static int si1133_calc_polynomial(u32 x, u32 y, u8 input_fraction, u8 num_coeff,
+static int si1133_calc_polynomial(s32 x, s32 y, u8 input_fraction, u8 num_coeff,
 				  const struct si1133_coeff *coeffs)
 {
 	u8 x_order, y_order;
@@ -614,7 +617,7 @@ static int si1133_measure(struct si1133_
 {
 	int err;
 
-	__be16 resp;
+	u8 buffer[SI1133_MEASURE_BUFFER_SIZE];
 
 	err = si1133_set_adcmux(data, 0, chan->channel);
 	if (err)
@@ -625,12 +628,13 @@ static int si1133_measure(struct si1133_
 	if (err)
 		return err;
 
-	err = si1133_bulk_read(data, SI1133_REG_HOSTOUT(0), sizeof(resp),
-			       (u8 *)&resp);
+	err = si1133_bulk_read(data, SI1133_REG_HOSTOUT(0), sizeof(buffer),
+			       buffer);
 	if (err)
 		return err;
 
-	*val = be16_to_cpu(resp);
+	*val = sign_extend32((buffer[0] << 16) | (buffer[1] << 8) | buffer[2],
+			     SI1133_SIGN_BIT_INDEX);
 
 	return err;
 }
@@ -704,9 +708,9 @@ static int si1133_get_lux(struct si1133_
 {
 	int err;
 	int lux;
-	u32 high_vis;
-	u32 low_vis;
-	u32 ir;
+	s32 high_vis;
+	s32 low_vis;
+	s32 ir;
 	u8 buffer[SI1133_LUX_BUFFER_SIZE];
 
 	/* Activate lux channels */
@@ -719,9 +723,16 @@ static int si1133_get_lux(struct si1133_
 	if (err)
 		return err;
 
-	high_vis = (buffer[0] << 16) | (buffer[1] << 8) | buffer[2];
-	low_vis = (buffer[3] << 16) | (buffer[4] << 8) | buffer[5];
-	ir = (buffer[6] << 16) | (buffer[7] << 8) | buffer[8];
+	high_vis =
+		sign_extend32((buffer[0] << 16) | (buffer[1] << 8) | buffer[2],
+			      SI1133_SIGN_BIT_INDEX);
+
+	low_vis =
+		sign_extend32((buffer[3] << 16) | (buffer[4] << 8) | buffer[5],
+			      SI1133_SIGN_BIT_INDEX);
+
+	ir = sign_extend32((buffer[6] << 16) | (buffer[7] << 8) | buffer[8],
+			   SI1133_SIGN_BIT_INDEX);
 
 	if (high_vis > SI1133_ADC_THRESHOLD || ir > SI1133_ADC_THRESHOLD)
 		lux = si1133_calc_polynomial(high_vis, ir,

[PATCH 5.4 106/118] fbmem: Adjust indentation in fb_prepare_logo and fb_blank

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 93166f5f2e4dc593cff8ca77ef828ac6f148b0f3 upstream.

Clang warns:

../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
        if (fb_logo.depth > 4 && depth > 4) {
        ^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
        else
        ^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        return ret;
        ^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
        if (!ret)
        ^
2 warnings generated.

This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.

Fixes: 1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth")
Link: https://github.com/ClangBuiltLinux/linux/issues/825
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/core/fbmem.c |   36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -662,20 +662,20 @@ int fb_prepare_logo(struct fb_info *info
 		fb_logo.depth = 1;
 
 
- 	if (fb_logo.depth > 4 && depth > 4) {
- 		switch (info->fix.visual) {
- 		case FB_VISUAL_TRUECOLOR:
- 			fb_logo.needs_truepalette = 1;
- 			break;
- 		case FB_VISUAL_DIRECTCOLOR:
- 			fb_logo.needs_directpalette = 1;
- 			fb_logo.needs_cmapreset = 1;
- 			break;
- 		case FB_VISUAL_PSEUDOCOLOR:
- 			fb_logo.needs_cmapreset = 1;
- 			break;
- 		}
- 	}
+	if (fb_logo.depth > 4 && depth > 4) {
+		switch (info->fix.visual) {
+		case FB_VISUAL_TRUECOLOR:
+			fb_logo.needs_truepalette = 1;
+			break;
+		case FB_VISUAL_DIRECTCOLOR:
+			fb_logo.needs_directpalette = 1;
+			fb_logo.needs_cmapreset = 1;
+			break;
+		case FB_VISUAL_PSEUDOCOLOR:
+			fb_logo.needs_cmapreset = 1;
+			break;
+		}
+	}
 
 	height = fb_logo.logo->height;
 	if (fb_center_logo)
@@ -1060,19 +1060,19 @@ fb_blank(struct fb_info *info, int blank
 	struct fb_event event;
 	int ret = -EINVAL;
 
- 	if (blank > FB_BLANK_POWERDOWN)
- 		blank = FB_BLANK_POWERDOWN;
+	if (blank > FB_BLANK_POWERDOWN)
+		blank = FB_BLANK_POWERDOWN;
 
 	event.info = info;
 	event.data = &blank;
 
 	if (info->fbops->fb_blank)
- 		ret = info->fbops->fb_blank(blank, info);
+		ret = info->fbops->fb_blank(blank, info);
 
 	if (!ret)
 		fb_notifier_call_chain(FB_EVENT_BLANK, &event);
 
- 	return ret;
+	return ret;
 }
 EXPORT_SYMBOL(fb_blank);
 

[PATCH 5.4 107/118] tty: evh_bytechan: Fix out of bounds accesses

[Greg Kroah-Hartman]

From: Stephen Rothwell <sfr@canb.auug.org.au>

commit 3670664b5da555a2a481449b3baafff113b0ac35 upstream.

ev_byte_channel_send() assumes that its third argument is a 16 byte
array. Some places where it is called it may not be (or we can't
easily tell if it is). Newer compilers have started producing warnings
about this, so make sure we actually pass a 16 byte array.

There may be more elegant solutions to this, but the driver is quite
old and hasn't been updated in many years.

The warnings (from a powerpc allyesconfig build) are:

  In file included from include/linux/byteorder/big_endian.h:5,
                   from arch/powerpc/include/uapi/asm/byteorder.h:14,
                   from include/asm-generic/bitops/le.h:6,
                   from arch/powerpc/include/asm/bitops.h:250,
                   from include/linux/bitops.h:29,
                   from include/linux/kernel.h:12,
                   from include/asm-generic/bug.h:19,
                   from arch/powerpc/include/asm/bug.h:109,
                   from include/linux/bug.h:5,
                   from include/linux/mmdebug.h:5,
                   from include/linux/gfp.h:5,
                   from include/linux/slab.h:15,
                   from drivers/tty/ehv_bytechan.c:24:
  drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’:
  arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds]
    298 |  r6 = be32_to_cpu(p[1]);
  include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’
     40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
        |                                                   ^
  arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’
    298 |  r6 = be32_to_cpu(p[1]);
        |       ^~~~~~~~~~~
  drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’
    166 | static void ehv_bc_udbg_putc(char c)
        |             ^~~~~~~~~~~~~~~~

Fixes: dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Trim warnings from change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/ehv_bytechan.c |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -136,6 +136,21 @@ static int find_console_handle(void)
 	return 1;
 }
 
+static unsigned int local_ev_byte_channel_send(unsigned int handle,
+					       unsigned int *count,
+					       const char *p)
+{
+	char buffer[EV_BYTE_CHANNEL_MAX_BYTES];
+	unsigned int c = *count;
+
+	if (c < sizeof(buffer)) {
+		memcpy(buffer, p, c);
+		memset(&buffer[c], 0, sizeof(buffer) - c);
+		p = buffer;
+	}
+	return ev_byte_channel_send(handle, count, p);
+}
+
 /*************************** EARLY CONSOLE DRIVER ***************************/
 
 #ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC
@@ -154,7 +169,7 @@ static void byte_channel_spin_send(const
 
 	do {
 		count = 1;
-		ret = ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
+		ret = local_ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE,
 					   &count, &data);
 	} while (ret == EV_EAGAIN);
 }
@@ -221,7 +236,7 @@ static int ehv_bc_console_byte_channel_s
 	while (count) {
 		len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES);
 		do {
-			ret = ev_byte_channel_send(handle, &len, s);
+			ret = local_ev_byte_channel_send(handle, &len, s);
 		} while (ret == EV_EAGAIN);
 		count -= len;
 		s += len;
@@ -401,7 +416,7 @@ static void ehv_bc_tx_dequeue(struct ehv
 			    CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE),
 			    EV_BYTE_CHANNEL_MAX_BYTES);
 
-		ret = ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
+		ret = local_ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail);
 
 		/* 'len' is valid only if the return code is 0 or EV_EAGAIN */
 		if (!ret || (ret == EV_EAGAIN))

[PATCH 5.4 108/118] locktorture: Print ratio of acquisitions, not failures

[Greg Kroah-Hartman]

From: Paul E. McKenney <paulmck@kernel.org>

commit 80c503e0e68fbe271680ab48f0fe29bc034b01b7 upstream.

The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail.  Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.

And this turns out to be not only a day-zero bug, but entirely my
own fault.  I hate it when that happens!

Fixes: 0af3fe1efa53 ("locktorture: Add a lock-torture kernel module")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/locking/locktorture.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/kernel/locking/locktorture.c
+++ b/kernel/locking/locktorture.c
@@ -697,10 +697,10 @@ static void __torture_print_stats(char *
 		if (statp[i].n_lock_fail)
 			fail = true;
 		sum += statp[i].n_lock_acquired;
-		if (max < statp[i].n_lock_fail)
-			max = statp[i].n_lock_fail;
-		if (min > statp[i].n_lock_fail)
-			min = statp[i].n_lock_fail;
+		if (max < statp[i].n_lock_acquired)
+			max = statp[i].n_lock_acquired;
+		if (min > statp[i].n_lock_acquired)
+			min = statp[i].n_lock_acquired;
 	}
 	page += sprintf(page,
 			"%s:  Total: %lld  Max/Min: %ld/%ld %s  Fail: %d %s\n",

[PATCH 5.4 109/118] mtd: rawnand: free the nand_device object

[Greg Kroah-Hartman]

From: Christophe Kerello <christophe.kerello@st.com>

commit 009264605cdf1b12962c3a46f75818d05452e890 upstream.

This patch releases the resources allocated in nanddev_init function.

Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/nand_base.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5907,6 +5907,8 @@ void nand_cleanup(struct nand_chip *chip
 	    chip->ecc.algo == NAND_ECC_BCH)
 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
 
+	nanddev_cleanup(&chip->base);
+
 	/* Free bad block table memory */
 	kfree(chip->bbt);
 	kfree(chip->data_buf);

[PATCH 5.4 110/118] mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

[Greg Kroah-Hartman]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

commit 621a7b780bd8b7054647d53d5071961f2c9e0873 upstream.

When writing the bad block marker to the OOB area the access mode
should be set to MTD_OPS_RAW as it is done for reading the marker.
Currently this only works because req.mode is initialized to
MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for
req.mode != MTD_OPS_AUTO_OOB.

Fix this by explicitly setting req.mode to MTD_OPS_RAW.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/spi/core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -609,6 +609,7 @@ static int spinand_markbad(struct nand_d
 		.ooboffs = 0,
 		.ooblen = sizeof(marker),
 		.oobbuf.out = marker,
+		.mode = MTD_OPS_RAW,
 	};
 	int ret;
 

[PATCH 5.4 111/118] docs: Fix path to MTD command line partition parser

[Greg Kroah-Hartman]

From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

commit fb2511247dc4061fd122d0195838278a4a0b7b59 upstream.

cmdlinepart.c has been moved to drivers/mtd/parsers/.

Fixes: a3f12a35c91d ("mtd: parsers: Move CMDLINE parser")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/admin-guide/kernel-parameters.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2741,7 +2741,7 @@
 			<name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
 
 	mtdparts=	[MTD]
-			See drivers/mtd/cmdlinepart.c.
+			See drivers/mtd/parsers/cmdlinepart.c
 
 	multitce=off	[PPC]  This parameter disables the use of the pSeries
 			firmware feature for updating multiple TCE entries

[PATCH 5.4 112/118] mtd: lpddr: Fix a double free in probe()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream.

This function is only called from lpddr_probe().  We free "lpddr" both
here and in the caller, so it's a double free.  The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.

Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/lpddr/lpddr_cmds.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -68,7 +68,6 @@ struct mtd_info *lpddr_cmdset(struct map
 	shared = kmalloc_array(lpddr->numchips, sizeof(struct flchip_shared),
 						GFP_KERNEL);
 	if (!shared) {
-		kfree(lpddr);
 		kfree(mtd);
 		return NULL;
 	}

[PATCH 5.4 113/118] mtd: phram: fix a double free issue in error path

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream.

The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.

Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/devices/phram.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -243,22 +243,25 @@ static int phram_setup(const char *val)
 
 	ret = parse_num64(&start, token[1]);
 	if (ret) {
-		kfree(name);
 		parse_err("illegal start address\n");
+		goto error;
 	}
 
 	ret = parse_num64(&len, token[2]);
 	if (ret) {
-		kfree(name);
 		parse_err("illegal device length\n");
+		goto error;
 	}
 
 	ret = register_device(name, start, len);
-	if (!ret)
-		pr_info("%s device: %#llx at %#llx\n", name, len, start);
-	else
-		kfree(name);
+	if (ret)
+		goto error;
 
+	pr_info("%s device: %#llx at %#llx\n", name, len, start);
+	return 0;
+
+error:
+	kfree(name);
 	return ret;
 }
 

[PATCH 5.4 114/118] KEYS: Dont write out to userspace while holding key semaphore

[Greg Kroah-Hartman]

From: Waiman Long <longman@redhat.com>

commit d3ec10aa95819bff18a0d936b18884c7816d0914 upstream.

A lockdep circular locking dependency report was seen when running a
keyutils test:

[12537.027242] ======================================================
[12537.059309] WARNING: possible circular locking dependency detected
[12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE    --------- -  -
[12537.125253] ------------------------------------------------------
[12537.153189] keyctl/25598 is trying to acquire lock:
[12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0
[12537.208365]
[12537.208365] but task is already holding lock:
[12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12537.270476]
[12537.270476] which lock already depends on the new lock.
[12537.270476]
[12537.307209]
[12537.307209] the existing dependency chain (in reverse order) is:
[12537.340754]
[12537.340754] -> #3 (&type->lock_class){++++}:
[12537.367434]        down_write+0x4d/0x110
[12537.385202]        __key_link_begin+0x87/0x280
[12537.405232]        request_key_and_link+0x483/0xf70
[12537.427221]        request_key+0x3c/0x80
[12537.444839]        dns_query+0x1db/0x5a5 [dns_resolver]
[12537.468445]        dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.496731]        cifs_reconnect+0xe04/0x2500 [cifs]
[12537.519418]        cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.546263]        cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.573551]        cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.601045]        kthread+0x30c/0x3d0
[12537.617906]        ret_from_fork+0x3a/0x50
[12537.636225]
[12537.636225] -> #2 (root_key_user.cons_lock){+.+.}:
[12537.664525]        __mutex_lock+0x105/0x11f0
[12537.683734]        request_key_and_link+0x35a/0xf70
[12537.705640]        request_key+0x3c/0x80
[12537.723304]        dns_query+0x1db/0x5a5 [dns_resolver]
[12537.746773]        dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.775607]        cifs_reconnect+0xe04/0x2500 [cifs]
[12537.798322]        cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.823369]        cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.847262]        cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.873477]        kthread+0x30c/0x3d0
[12537.890281]        ret_from_fork+0x3a/0x50
[12537.908649]
[12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}:
[12537.935225]        __mutex_lock+0x105/0x11f0
[12537.954450]        cifs_call_async+0x102/0x7f0 [cifs]
[12537.977250]        smb2_async_readv+0x6c3/0xc90 [cifs]
[12538.000659]        cifs_readpages+0x120a/0x1e50 [cifs]
[12538.023920]        read_pages+0xf5/0x560
[12538.041583]        __do_page_cache_readahead+0x41d/0x4b0
[12538.067047]        ondemand_readahead+0x44c/0xc10
[12538.092069]        filemap_fault+0xec1/0x1830
[12538.111637]        __do_fault+0x82/0x260
[12538.129216]        do_fault+0x419/0xfb0
[12538.146390]        __handle_mm_fault+0x862/0xdf0
[12538.167408]        handle_mm_fault+0x154/0x550
[12538.187401]        __do_page_fault+0x42f/0xa60
[12538.207395]        do_page_fault+0x38/0x5e0
[12538.225777]        page_fault+0x1e/0x30
[12538.243010]
[12538.243010] -> #0 (&mm->mmap_sem){++++}:
[12538.267875]        lock_acquire+0x14c/0x420
[12538.286848]        __might_fault+0x119/0x1b0
[12538.306006]        keyring_read_iterator+0x7e/0x170
[12538.327936]        assoc_array_subtree_iterate+0x97/0x280
[12538.352154]        keyring_read+0xe9/0x110
[12538.370558]        keyctl_read_key+0x1b9/0x220
[12538.391470]        do_syscall_64+0xa5/0x4b0
[12538.410511]        entry_SYSCALL_64_after_hwframe+0x6a/0xdf
[12538.435535]
[12538.435535] other info that might help us debug this:
[12538.435535]
[12538.472829] Chain exists of:
[12538.472829]   &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class
[12538.472829]
[12538.524820]  Possible unsafe locking scenario:
[12538.524820]
[12538.551431]        CPU0                    CPU1
[12538.572654]        ----                    ----
[12538.595865]   lock(&type->lock_class);
[12538.613737]                                lock(root_key_user.cons_lock);
[12538.644234]                                lock(&type->lock_class);
[12538.672410]   lock(&mm->mmap_sem);
[12538.687758]
[12538.687758]  *** DEADLOCK ***
[12538.687758]
[12538.714455] 1 lock held by keyctl/25598:
[12538.732097]  #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12538.770573]
[12538.770573] stack backtrace:
[12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G
[12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015
[12538.881963] Call Trace:
[12538.892897]  dump_stack+0x9a/0xf0
[12538.907908]  print_circular_bug.isra.25.cold.50+0x1bc/0x279
[12538.932891]  ? save_trace+0xd6/0x250
[12538.948979]  check_prev_add.constprop.32+0xc36/0x14f0
[12538.971643]  ? keyring_compare_object+0x104/0x190
[12538.992738]  ? check_usage+0x550/0x550
[12539.009845]  ? sched_clock+0x5/0x10
[12539.025484]  ? sched_clock_cpu+0x18/0x1e0
[12539.043555]  __lock_acquire+0x1f12/0x38d0
[12539.061551]  ? trace_hardirqs_on+0x10/0x10
[12539.080554]  lock_acquire+0x14c/0x420
[12539.100330]  ? __might_fault+0xc4/0x1b0
[12539.119079]  __might_fault+0x119/0x1b0
[12539.135869]  ? __might_fault+0xc4/0x1b0
[12539.153234]  keyring_read_iterator+0x7e/0x170
[12539.172787]  ? keyring_read+0x110/0x110
[12539.190059]  assoc_array_subtree_iterate+0x97/0x280
[12539.211526]  keyring_read+0xe9/0x110
[12539.227561]  ? keyring_gc_check_iterator+0xc0/0xc0
[12539.249076]  keyctl_read_key+0x1b9/0x220
[12539.266660]  do_syscall_64+0xa5/0x4b0
[12539.283091]  entry_SYSCALL_64_after_hwframe+0x6a/0xdf

One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.

That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,

  1) The put_user() call is replaced by a direct copy.
  2) The copy_to_user() call is replaced by memcpy().
  3) All the fault handling code is removed.

Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.

Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/keys/big_key-type.h              |    2 
 include/keys/user-type.h                 |    3 -
 include/linux/key-type.h                 |    2 
 net/dns_resolver/dns_key.c               |    2 
 net/rxrpc/key.c                          |   27 +++--------
 security/keys/big_key.c                  |   11 +---
 security/keys/encrypted-keys/encrypted.c |    7 +-
 security/keys/keyctl.c                   |   73 ++++++++++++++++++++++++-------
 security/keys/keyring.c                  |    6 --
 security/keys/request_key_auth.c         |    7 +-
 security/keys/trusted.c                  |   14 -----
 security/keys/user_defined.c             |    5 --
 12 files changed, 85 insertions(+), 74 deletions(-)

--- a/include/keys/big_key-type.h
+++ b/include/keys/big_key-type.h
@@ -17,6 +17,6 @@ extern void big_key_free_preparse(struct
 extern void big_key_revoke(struct key *key);
 extern void big_key_destroy(struct key *key);
 extern void big_key_describe(const struct key *big_key, struct seq_file *m);
-extern long big_key_read(const struct key *key, char __user *buffer, size_t buflen);
+extern long big_key_read(const struct key *key, char *buffer, size_t buflen);
 
 #endif /* _KEYS_BIG_KEY_TYPE_H */
--- a/include/keys/user-type.h
+++ b/include/keys/user-type.h
@@ -41,8 +41,7 @@ extern int user_update(struct key *key,
 extern void user_revoke(struct key *key);
 extern void user_destroy(struct key *key);
 extern void user_describe(const struct key *user, struct seq_file *m);
-extern long user_read(const struct key *key,
-		      char __user *buffer, size_t buflen);
+extern long user_read(const struct key *key, char *buffer, size_t buflen);
 
 static inline const struct user_key_payload *user_key_payload_rcu(const struct key *key)
 {
--- a/include/linux/key-type.h
+++ b/include/linux/key-type.h
@@ -127,7 +127,7 @@ struct key_type {
 	 *   much is copied into the buffer
 	 * - shouldn't do the copy if the buffer is NULL
 	 */
-	long (*read)(const struct key *key, char __user *buffer, size_t buflen);
+	long (*read)(const struct key *key, char *buffer, size_t buflen);
 
 	/* handle request_key() for this type instead of invoking
 	 * /sbin/request-key (optional)
--- a/net/dns_resolver/dns_key.c
+++ b/net/dns_resolver/dns_key.c
@@ -302,7 +302,7 @@ static void dns_resolver_describe(const
  * - the key's semaphore is read-locked
  */
 static long dns_resolver_read(const struct key *key,
-			      char __user *buffer, size_t buflen)
+			      char *buffer, size_t buflen)
 {
 	int err = PTR_ERR(key->payload.data[dns_key_error]);
 
--- a/net/rxrpc/key.c
+++ b/net/rxrpc/key.c
@@ -31,7 +31,7 @@ static void rxrpc_free_preparse_s(struct
 static void rxrpc_destroy(struct key *);
 static void rxrpc_destroy_s(struct key *);
 static void rxrpc_describe(const struct key *, struct seq_file *);
-static long rxrpc_read(const struct key *, char __user *, size_t);
+static long rxrpc_read(const struct key *, char *, size_t);
 
 /*
  * rxrpc defined keys take an arbitrary string as the description and an
@@ -1042,12 +1042,12 @@ EXPORT_SYMBOL(rxrpc_get_null_key);
  * - this returns the result in XDR form
  */
 static long rxrpc_read(const struct key *key,
-		       char __user *buffer, size_t buflen)
+		       char *buffer, size_t buflen)
 {
 	const struct rxrpc_key_token *token;
 	const struct krb5_principal *princ;
 	size_t size;
-	__be32 __user *xdr, *oldxdr;
+	__be32 *xdr, *oldxdr;
 	u32 cnlen, toksize, ntoks, tok, zero;
 	u16 toksizes[AFSTOKEN_MAX];
 	int loop;
@@ -1124,30 +1124,25 @@ static long rxrpc_read(const struct key
 	if (!buffer || buflen < size)
 		return size;
 
-	xdr = (__be32 __user *) buffer;
+	xdr = (__be32 *)buffer;
 	zero = 0;
 #define ENCODE(x)				\
 	do {					\
-		__be32 y = htonl(x);		\
-		if (put_user(y, xdr++) < 0)	\
-			goto fault;		\
+		*xdr++ = htonl(x);		\
 	} while(0)
 #define ENCODE_DATA(l, s)						\
 	do {								\
 		u32 _l = (l);						\
 		ENCODE(l);						\
-		if (copy_to_user(xdr, (s), _l) != 0)			\
-			goto fault;					\
-		if (_l & 3 &&						\
-		    copy_to_user((u8 __user *)xdr + _l, &zero, 4 - (_l & 3)) != 0) \
-			goto fault;					\
+		memcpy(xdr, (s), _l);					\
+		if (_l & 3)						\
+			memcpy((u8 *)xdr + _l, &zero, 4 - (_l & 3));	\
 		xdr += (_l + 3) >> 2;					\
 	} while(0)
 #define ENCODE64(x)					\
 	do {						\
 		__be64 y = cpu_to_be64(x);		\
-		if (copy_to_user(xdr, &y, 8) != 0)	\
-			goto fault;			\
+		memcpy(xdr, &y, 8);			\
 		xdr += 8 >> 2;				\
 	} while(0)
 #define ENCODE_STR(s)				\
@@ -1238,8 +1233,4 @@ static long rxrpc_read(const struct key
 	ASSERTCMP((char __user *) xdr - buffer, ==, size);
 	_leave(" = %zu", size);
 	return size;
-
-fault:
-	_leave(" = -EFAULT");
-	return -EFAULT;
 }
--- a/security/keys/big_key.c
+++ b/security/keys/big_key.c
@@ -352,7 +352,7 @@ void big_key_describe(const struct key *
  * read the key data
  * - the key's semaphore is read-locked
  */
-long big_key_read(const struct key *key, char __user *buffer, size_t buflen)
+long big_key_read(const struct key *key, char *buffer, size_t buflen)
 {
 	size_t datalen = (size_t)key->payload.data[big_key_len];
 	long ret;
@@ -391,9 +391,8 @@ long big_key_read(const struct key *key,
 
 		ret = datalen;
 
-		/* copy decrypted data to user */
-		if (copy_to_user(buffer, buf->virt, datalen) != 0)
-			ret = -EFAULT;
+		/* copy out decrypted data */
+		memcpy(buffer, buf->virt, datalen);
 
 err_fput:
 		fput(file);
@@ -401,9 +400,7 @@ error:
 		big_key_free_buffer(buf);
 	} else {
 		ret = datalen;
-		if (copy_to_user(buffer, key->payload.data[big_key_data],
-				 datalen) != 0)
-			ret = -EFAULT;
+		memcpy(buffer, key->payload.data[big_key_data], datalen);
 	}
 
 	return ret;
--- a/security/keys/encrypted-keys/encrypted.c
+++ b/security/keys/encrypted-keys/encrypted.c
@@ -902,14 +902,14 @@ out:
 }
 
 /*
- * encrypted_read - format and copy the encrypted data to userspace
+ * encrypted_read - format and copy out the encrypted data
  *
  * The resulting datablob format is:
  * <master-key name> <decrypted data length> <encrypted iv> <encrypted data>
  *
  * On success, return to userspace the encrypted key datablob size.
  */
-static long encrypted_read(const struct key *key, char __user *buffer,
+static long encrypted_read(const struct key *key, char *buffer,
 			   size_t buflen)
 {
 	struct encrypted_key_payload *epayload;
@@ -957,8 +957,7 @@ static long encrypted_read(const struct
 	key_put(mkey);
 	memzero_explicit(derived_key, sizeof(derived_key));
 
-	if (copy_to_user(buffer, ascii_buf, asciiblob_len) != 0)
-		ret = -EFAULT;
+	memcpy(buffer, ascii_buf, asciiblob_len);
 	kzfree(ascii_buf);
 
 	return asciiblob_len;
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -798,6 +798,21 @@ error:
 }
 
 /*
+ * Call the read method
+ */
+static long __keyctl_read_key(struct key *key, char *buffer, size_t buflen)
+{
+	long ret;
+
+	down_read(&key->sem);
+	ret = key_validate(key);
+	if (ret == 0)
+		ret = key->type->read(key, buffer, buflen);
+	up_read(&key->sem);
+	return ret;
+}
+
+/*
  * Read a key's payload.
  *
  * The key must either grant the caller Read permission, or it must grant the
@@ -812,26 +827,27 @@ long keyctl_read_key(key_serial_t keyid,
 	struct key *key;
 	key_ref_t key_ref;
 	long ret;
+	char *key_data;
 
 	/* find the key first */
 	key_ref = lookup_user_key(keyid, 0, 0);
 	if (IS_ERR(key_ref)) {
 		ret = -ENOKEY;
-		goto error;
+		goto out;
 	}
 
 	key = key_ref_to_ptr(key_ref);
 
 	ret = key_read_state(key);
 	if (ret < 0)
-		goto error2; /* Negatively instantiated */
+		goto key_put_out; /* Negatively instantiated */
 
 	/* see if we can read it directly */
 	ret = key_permission(key_ref, KEY_NEED_READ);
 	if (ret == 0)
 		goto can_read_key;
 	if (ret != -EACCES)
-		goto error2;
+		goto key_put_out;
 
 	/* we can't; see if it's searchable from this process's keyrings
 	 * - we automatically take account of the fact that it may be
@@ -839,26 +855,51 @@ long keyctl_read_key(key_serial_t keyid,
 	 */
 	if (!is_key_possessed(key_ref)) {
 		ret = -EACCES;
-		goto error2;
+		goto key_put_out;
 	}
 
 	/* the key is probably readable - now try to read it */
 can_read_key:
-	ret = -EOPNOTSUPP;
-	if (key->type->read) {
-		/* Read the data with the semaphore held (since we might sleep)
-		 * to protect against the key being updated or revoked.
-		 */
-		down_read(&key->sem);
-		ret = key_validate(key);
-		if (ret == 0)
-			ret = key->type->read(key, buffer, buflen);
-		up_read(&key->sem);
+	if (!key->type->read) {
+		ret = -EOPNOTSUPP;
+		goto key_put_out;
+	}
+
+	if (!buffer || !buflen) {
+		/* Get the key length from the read method */
+		ret = __keyctl_read_key(key, NULL, 0);
+		goto key_put_out;
+	}
+
+	/*
+	 * Read the data with the semaphore held (since we might sleep)
+	 * to protect against the key being updated or revoked.
+	 *
+	 * Allocating a temporary buffer to hold the keys before
+	 * transferring them to user buffer to avoid potential
+	 * deadlock involving page fault and mmap_sem.
+	 */
+	key_data = kmalloc(buflen, GFP_KERNEL);
+
+	if (!key_data) {
+		ret = -ENOMEM;
+		goto key_put_out;
+	}
+	ret = __keyctl_read_key(key, key_data, buflen);
+
+	/*
+	 * Read methods will just return the required length without
+	 * any copying if the provided length isn't large enough.
+	 */
+	if (ret > 0 && ret <= buflen) {
+		if (copy_to_user(buffer, key_data, ret))
+			ret = -EFAULT;
 	}
+	kzfree(key_data);
 
-error2:
+key_put_out:
 	key_put(key);
-error:
+out:
 	return ret;
 }
 
--- a/security/keys/keyring.c
+++ b/security/keys/keyring.c
@@ -459,7 +459,6 @@ static int keyring_read_iterator(const v
 {
 	struct keyring_read_iterator_context *ctx = data;
 	const struct key *key = keyring_ptr_to_key(object);
-	int ret;
 
 	kenter("{%s,%d},,{%zu/%zu}",
 	       key->type->name, key->serial, ctx->count, ctx->buflen);
@@ -467,10 +466,7 @@ static int keyring_read_iterator(const v
 	if (ctx->count >= ctx->buflen)
 		return 1;
 
-	ret = put_user(key->serial, ctx->buffer);
-	if (ret < 0)
-		return ret;
-	ctx->buffer++;
+	*ctx->buffer++ = key->serial;
 	ctx->count += sizeof(key->serial);
 	return 0;
 }
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -22,7 +22,7 @@ static int request_key_auth_instantiate(
 static void request_key_auth_describe(const struct key *, struct seq_file *);
 static void request_key_auth_revoke(struct key *);
 static void request_key_auth_destroy(struct key *);
-static long request_key_auth_read(const struct key *, char __user *, size_t);
+static long request_key_auth_read(const struct key *, char *, size_t);
 
 /*
  * The request-key authorisation key type definition.
@@ -80,7 +80,7 @@ static void request_key_auth_describe(co
  * - the key's semaphore is read-locked
  */
 static long request_key_auth_read(const struct key *key,
-				  char __user *buffer, size_t buflen)
+				  char *buffer, size_t buflen)
 {
 	struct request_key_auth *rka = dereference_key_locked(key);
 	size_t datalen;
@@ -97,8 +97,7 @@ static long request_key_auth_read(const
 		if (buflen > datalen)
 			buflen = datalen;
 
-		if (copy_to_user(buffer, rka->callout_info, buflen) != 0)
-			ret = -EFAULT;
+		memcpy(buffer, rka->callout_info, buflen);
 	}
 
 	return ret;
--- a/security/keys/trusted.c
+++ b/security/keys/trusted.c
@@ -1144,11 +1144,10 @@ out:
  * trusted_read - copy the sealed blob data to userspace in hex.
  * On success, return to userspace the trusted key datablob size.
  */
-static long trusted_read(const struct key *key, char __user *buffer,
+static long trusted_read(const struct key *key, char *buffer,
 			 size_t buflen)
 {
 	const struct trusted_key_payload *p;
-	char *ascii_buf;
 	char *bufp;
 	int i;
 
@@ -1157,18 +1156,9 @@ static long trusted_read(const struct ke
 		return -EINVAL;
 
 	if (buffer && buflen >= 2 * p->blob_len) {
-		ascii_buf = kmalloc_array(2, p->blob_len, GFP_KERNEL);
-		if (!ascii_buf)
-			return -ENOMEM;
-
-		bufp = ascii_buf;
+		bufp = buffer;
 		for (i = 0; i < p->blob_len; i++)
 			bufp = hex_byte_pack(bufp, p->blob[i]);
-		if (copy_to_user(buffer, ascii_buf, 2 * p->blob_len) != 0) {
-			kzfree(ascii_buf);
-			return -EFAULT;
-		}
-		kzfree(ascii_buf);
 	}
 	return 2 * p->blob_len;
 }
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -168,7 +168,7 @@ EXPORT_SYMBOL_GPL(user_describe);
  * read the key data
  * - the key's semaphore is read-locked
  */
-long user_read(const struct key *key, char __user *buffer, size_t buflen)
+long user_read(const struct key *key, char *buffer, size_t buflen)
 {
 	const struct user_key_payload *upayload;
 	long ret;
@@ -181,8 +181,7 @@ long user_read(const struct key *key, ch
 		if (buflen > upayload->datalen)
 			buflen = upayload->datalen;
 
-		if (copy_to_user(buffer, upayload->data, buflen) != 0)
-			ret = -EFAULT;
+		memcpy(buffer, upayload->data, buflen);
 	}
 
 	return ret;

[PATCH 5.4 115/118] bpf: fix buggy r0 retval refinement for tracing helpers

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>
Date: Tue, 21 Apr 2020 15:01:49 +0200

[ no upstream commit ]

See the glory details in 100605035e15 ("bpf: Verifier, do_refine_retval_range
may clamp umin to 0 incorrectly") for why 849fa50662fb ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") is buggy. The whole series however
is not suitable for stable since it adds significant amount [0] of verifier
complexity in order to add 32bit subreg tracking. Something simpler is needed.

Unfortunately, reverting 849fa50662fb ("bpf/verifier: refine retval R0 state
for bpf_get_stack helper") or just cherry-picking 100605035e15 ("bpf: Verifier,
do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since
it will break existing tracing programs badly (at least those that are using
bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is
also not an option since on 4.19 kernels an error will cause a soft-lockup due
to hitting dead-code sanitized branch since we don't hard-wire such branches
in old kernels yet. But even then for 5.x 849fa50662fb ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") would cause wrong bounds on the
verifier simluation when an error is hit.

In one of the earlier iterations of mentioned patch series for upstream there
was the concern that just using smax_value in do_refine_retval_range() would
nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1]
which eventually led to the 32bit subreg tracking in the first place. While I
initially went for implementing the idea [1] to pattern match the two shift
operations, it turned out to be more complex than actually needed, meaning, we
could simply treat do_refine_retval_range() similarly to how we branch off
verification for conditionals or under speculation, that is, pushing a new
reg state to the stack for later verification. This means, instead of verifying
the current path with the ret_reg in [S32MIN, msize_max_value] interval where
later bounds would get nuked, we split this into two: i) for the success case
where ret_reg can be in [0, msize_max_value], and ii) for the error case with
ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds
during these shift patterns and can match reg < 0 test. test_progs also succeed
with this approach.

  [0] https://lore.kernel.org/bpf/158507130343.15666.8018068546764556975.stgit@john-Precision-5820-Tower/
  [1] https://lore.kernel.org/bpf/158015334199.28573.4940395881683556537.stgit@john-XPS-13-9370/T/#m2e0ad1d5949131014748b6daa48a3495e7f0456d

Fixes: 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper")
Reported-by: Lorenzo Fontana <fontanalorenz@gmail.com>
Reported-by: Leonardo Di Donato <leodidonato@gmail.com>
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/bpf/verifier.c |   45 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 11 deletions(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -201,8 +201,7 @@ struct bpf_call_arg_meta {
 	bool pkt_access;
 	int regno;
 	int access_size;
-	s64 msize_smax_value;
-	u64 msize_umax_value;
+	u64 msize_max_value;
 	int ref_obj_id;
 	int func_id;
 };
@@ -3377,8 +3376,7 @@ static int check_func_arg(struct bpf_ver
 		/* remember the mem_size which may be used later
 		 * to refine return values.
 		 */
-		meta->msize_smax_value = reg->smax_value;
-		meta->msize_umax_value = reg->umax_value;
+		meta->msize_max_value = reg->umax_value;
 
 		/* The register is SCALAR_VALUE; the access check
 		 * happens using its boundaries.
@@ -3866,21 +3864,44 @@ static int prepare_func_exit(struct bpf_
 	return 0;
 }
 
-static void do_refine_retval_range(struct bpf_reg_state *regs, int ret_type,
-				   int func_id,
-				   struct bpf_call_arg_meta *meta)
+static int do_refine_retval_range(struct bpf_verifier_env *env,
+				  struct bpf_reg_state *regs, int ret_type,
+				  int func_id, struct bpf_call_arg_meta *meta)
 {
 	struct bpf_reg_state *ret_reg = &regs[BPF_REG_0];
+	struct bpf_reg_state tmp_reg = *ret_reg;
+	bool ret;
 
 	if (ret_type != RET_INTEGER ||
 	    (func_id != BPF_FUNC_get_stack &&
 	     func_id != BPF_FUNC_probe_read_str))
-		return;
+		return 0;
+
+	/* Error case where ret is in interval [S32MIN, -1]. */
+	ret_reg->smin_value = S32_MIN;
+	ret_reg->smax_value = -1;
 
-	ret_reg->smax_value = meta->msize_smax_value;
-	ret_reg->umax_value = meta->msize_umax_value;
 	__reg_deduce_bounds(ret_reg);
 	__reg_bound_offset(ret_reg);
+	__update_reg_bounds(ret_reg);
+
+	ret = push_stack(env, env->insn_idx + 1, env->insn_idx, false);
+	if (!ret)
+		return -EFAULT;
+
+	*ret_reg = tmp_reg;
+
+	/* Success case where ret is in range [0, msize_max_value]. */
+	ret_reg->smin_value = 0;
+	ret_reg->smax_value = meta->msize_max_value;
+	ret_reg->umin_value = ret_reg->smin_value;
+	ret_reg->umax_value = ret_reg->smax_value;
+
+	__reg_deduce_bounds(ret_reg);
+	__reg_bound_offset(ret_reg);
+	__update_reg_bounds(ret_reg);
+
+	return 0;
 }
 
 static int
@@ -4112,7 +4133,9 @@ static int check_helper_call(struct bpf_
 		regs[BPF_REG_0].ref_obj_id = id;
 	}
 
-	do_refine_retval_range(regs, fn->ret_type, func_id, &meta);
+	err = do_refine_retval_range(env, regs, fn->ret_type, func_id, &meta);
+	if (err)
+		return err;
 
 	err = check_map_func_compatibility(env, meta.map_ptr, func_id);
 	if (err)

[PATCH 5.4 116/118] bpf: Test_verifier, bpf_get_stack return value add <0

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

commit 9ac26e9973bac5716a2a542e32f380c84db2b88c upstream.

With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],

#101/p bpf_get_stack return R0 within range FAIL
Failed to load prog 'Success'!
[..]
14: (85) call bpf_get_stack#67
 R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
 R3_w=inv48
15:
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
15: (b7) r1 = 0
16:
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
 R1_w=inv0
16: (bf) r8 = r0
17:
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
 R1_w=inv0
 R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
17: (67) r8 <<= 32
18:
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
 R1_w=inv0
 R8_w=inv(id=0,smax_value=9223372032559808512,
               umax_value=18446744069414584320,
               var_off=(0x0; 0xffffffff00000000),
               s32_min_value=0,
               s32_max_value=0,
               u32_max_value=0,
               var32_off=(0x0; 0x0))
18: (c7) r8 s>>= 32
19
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
 R1_w=inv0
 R8_w=inv(id=0,smin_value=-2147483648,
               smax_value=2147483647,
               var32_off=(0x0; 0xffffffff))
19: (cd) if r1 s< r8 goto pc+16
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
 R1_w=inv0
 R8_w=inv(id=0,smin_value=-2147483648,
               smax_value=0,
               var32_off=(0x0; 0xffffffff))
20:
 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
 R1_w=inv0
 R8_w=inv(id=0,smin_value=-2147483648,
               smax_value=0,
 R9=inv48
20: (1f) r9 -= r8
21: (bf) r2 = r7
22:
 R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
22: (0f) r2 += r8
value -2147483648 makes map_value pointer be out of bounds

After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.

Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.

Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/bpf/verifier/bpf_get_stack.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/tools/testing/selftests/bpf/verifier/bpf_get_stack.c
+++ b/tools/testing/selftests/bpf/verifier/bpf_get_stack.c
@@ -9,17 +9,17 @@
 	BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
 	BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 28),
 	BPF_MOV64_REG(BPF_REG_7, BPF_REG_0),
-	BPF_MOV64_IMM(BPF_REG_9, sizeof(struct test_val)),
+	BPF_MOV64_IMM(BPF_REG_9, sizeof(struct test_val)/2),
 	BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
 	BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
-	BPF_MOV64_IMM(BPF_REG_3, sizeof(struct test_val)),
+	BPF_MOV64_IMM(BPF_REG_3, sizeof(struct test_val)/2),
 	BPF_MOV64_IMM(BPF_REG_4, 256),
 	BPF_EMIT_CALL(BPF_FUNC_get_stack),
 	BPF_MOV64_IMM(BPF_REG_1, 0),
 	BPF_MOV64_REG(BPF_REG_8, BPF_REG_0),
 	BPF_ALU64_IMM(BPF_LSH, BPF_REG_8, 32),
 	BPF_ALU64_IMM(BPF_ARSH, BPF_REG_8, 32),
-	BPF_JMP_REG(BPF_JSLT, BPF_REG_1, BPF_REG_8, 16),
+	BPF_JMP_REG(BPF_JSGT, BPF_REG_1, BPF_REG_8, 16),
 	BPF_ALU64_REG(BPF_SUB, BPF_REG_9, BPF_REG_8),
 	BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
 	BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_8),
@@ -29,7 +29,7 @@
 	BPF_MOV64_REG(BPF_REG_3, BPF_REG_2),
 	BPF_ALU64_REG(BPF_ADD, BPF_REG_3, BPF_REG_1),
 	BPF_MOV64_REG(BPF_REG_1, BPF_REG_7),
-	BPF_MOV64_IMM(BPF_REG_5, sizeof(struct test_val)),
+	BPF_MOV64_IMM(BPF_REG_5, sizeof(struct test_val)/2),
 	BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_5),
 	BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 4),
 	BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),

[PATCH 5.4 117/118] bpf: Test_progs, add test to catch retval refine error handling

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

commit d2db08c7a14e0b5eed6132baf258b80622e041a9 upstream.

Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.

The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c    |    5 ++
 tools/testing/selftests/bpf/progs/test_get_stack_rawtp_err.c |   26 +++++++++++
 2 files changed, 31 insertions(+)

--- a/tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c
+++ b/tools/testing/selftests/bpf/prog_tests/get_stack_raw_tp.c
@@ -82,6 +82,7 @@ static void get_stack_print_output(void
 void test_get_stack_raw_tp(void)
 {
 	const char *file = "./test_get_stack_rawtp.o";
+	const char *file_err = "./test_get_stack_rawtp_err.o";
 	const char *prog_name = "raw_tracepoint/sys_enter";
 	int i, err, prog_fd, exp_cnt = MAX_CNT_RAWTP;
 	struct perf_buffer_opts pb_opts = {};
@@ -93,6 +94,10 @@ void test_get_stack_raw_tp(void)
 	struct bpf_map *map;
 	cpu_set_t cpu_set;
 
+	err = bpf_prog_load(file_err, BPF_PROG_TYPE_RAW_TRACEPOINT, &obj, &prog_fd);
+	if (CHECK(err >= 0, "prog_load raw tp", "err %d errno %d\n", err, errno))
+		return;
+
 	err = bpf_prog_load(file, BPF_PROG_TYPE_RAW_TRACEPOINT, &obj, &prog_fd);
 	if (CHECK(err, "prog_load raw tp", "err %d errno %d\n", err, errno))
 		return;
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_get_stack_rawtp_err.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+
+#define MAX_STACK_RAWTP 10
+
+SEC("raw_tracepoint/sys_enter")
+int bpf_prog2(void *ctx)
+{
+	__u64 stack[MAX_STACK_RAWTP];
+	int error;
+
+	/* set all the flags which should return -EINVAL */
+	error = bpf_get_stack(ctx, stack, 0, -1);
+	if (error < 0)
+		goto loop;
+
+	return error;
+loop:
+	while (1) {
+		error++;
+	}
+}
+
+char _license[] SEC("license") = "GPL";

[PATCH 5.4 118/118] bpf, test_verifier: switch bpf_get_stacks 0 s> r8 test

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

[ no upstream commit ]

Switch the comparison, so that is_branch_taken() will recognize that below
branch is never taken:

  [...]
  17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  17: (67) r8 <<= 32
  18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...]
  18: (c7) r8 s>>= 32
  19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  19: (6d) if r1 s> r8 goto pc+16
  [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  [...]

Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.

For the sake of the test_verifier, it is probably not needed here:

  # ./test_verifier 101
  #101/p bpf_get_stack return R0 within range OK
  Summary: 1 PASSED, 0 SKIPPED, 0 FAILED

I haven't seen this issue in test_progs* though, they are passing fine:

  # ./test_progs-no_alu32 -t get_stack
  Switching to flavor 'no_alu32' subdirectory...
  #20 get_stack_raw_tp:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t get_stack
  #20 get_stack_raw_tp:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/verifier/bpf_get_stack.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/bpf/verifier/bpf_get_stack.c
+++ b/tools/testing/selftests/bpf/verifier/bpf_get_stack.c
@@ -19,7 +19,7 @@
 	BPF_MOV64_REG(BPF_REG_8, BPF_REG_0),
 	BPF_ALU64_IMM(BPF_LSH, BPF_REG_8, 32),
 	BPF_ALU64_IMM(BPF_ARSH, BPF_REG_8, 32),
-	BPF_JMP_REG(BPF_JSGT, BPF_REG_1, BPF_REG_8, 16),
+	BPF_JMP_REG(BPF_JSLT, BPF_REG_8, BPF_REG_1, 16),
 	BPF_ALU64_REG(BPF_SUB, BPF_REG_9, BPF_REG_8),
 	BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
 	BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_8),

Re: [PATCH 5.4 061/118] hibernate: Allow uswsusp to write to swap

[Marian Klein]

Hi Everyone
I am glad the official patch made it into 5.4 finally.
Well done everyone. Now distros should pick it up quickly , especially
ubuntu 20.04 Long Term Support.
Your most faithful fan
Marian

On Wed, 22 Apr 2020 at 11:18, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> From: Domenico Andreoli <domenico.andreoli@linux.com>
>
> [ Upstream commit 56939e014a6c212b317414faa307029e2e80c3b9 ]
>
> It turns out that there is one use case for programs being able to
> write to swap devices, and that is the userspace hibernation code.
>
> Quick fix: disable the S_SWAPFILE check if hibernation is configured.
>
> Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files")
> Reported-by: Domenico Andreoli <domenico.andreoli@linux.com>
> Reported-by: Marian Klein <mkleinsoft@gmail.com>
> Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  fs/block_dev.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/fs/block_dev.c b/fs/block_dev.c
> index d612468ee66bf..34644ce4b5025 100644
> --- a/fs/block_dev.c
> +++ b/fs/block_dev.c
> @@ -34,6 +34,7 @@
>  #include <linux/task_io_accounting_ops.h>
>  #include <linux/falloc.h>
>  #include <linux/uaccess.h>
> +#include <linux/suspend.h>
>  #include "internal.h"
>
>  struct bdev_inode {
> @@ -1975,7 +1976,8 @@ ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
>         if (bdev_read_only(I_BDEV(bd_inode)))
>                 return -EPERM;
>
> -       if (IS_SWAPFILE(bd_inode))
> +       /* uswsusp needs write permission to the swap */
> +       if (IS_SWAPFILE(bd_inode) && !hibernation_available())
>                 return -ETXTBSY;
>
>         if (!iov_iter_count(from))
> --
> 2.20.1
>
>
>

Re: [PATCH 5.4 000/118] 5.4.35-rc1 review

[Guenter Roeck]

On Wed, Apr 22, 2020 at 11:56:01AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.35 release.
> There are 118 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 24 Apr 2020 09:48:23 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 427 pass: 427 fail: 0

Guenter

Re: [PATCH 5.4 000/118] 5.4.35-rc1 review

[Naresh Kamboju]

On Wed, 22 Apr 2020 at 15:53, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.35 release.
> There are 118 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 24 Apr 2020 09:48:23 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.35-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.35-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 186764443bf32f12e07093aaff52dd4a25231781
git describe: v5.4.34-119-g186764443bf3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.34-119-g186764443bf3

No regressions (compared to build v5.4.34)

No fixes (compared to build v5.4.34)

Ran 37179 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* kselftest/networking
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* perf
* kvm-unit-tests
* libgpiod
* ltp-cve-tests
* ltp-hugetlb-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* network-basic-tests
* libhugetlbfs
* ltp-containers-tests
* ltp-fs-tests
* ltp-open-posix-tests
* v4l2-compliance
* spectre-meltdown-checker-test
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-native/networking
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* kselftest-vsyscall-mode-none/networking

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/118] 5.4.35-rc1 review

[Jon Hunter]

On 22/04/2020 10:56, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.35 release.
> There are 118 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 24 Apr 2020 09:48:23 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.35-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra

Test results for stable-v5.4:
    13 builds:	13 pass, 0 fail
    24 boots:	24 pass, 0 fail
    40 tests:	40 pass, 0 fail

Linux version:	5.4.35-rc1-g186764443bf3
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.4 000/118] 5.4.35-rc1 review

[shuah]

On 4/22/20 3:56 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.35 release.
> There are 118 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 24 Apr 2020 09:48:23 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.35-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah