linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, tglx@linutronix.de, bp@alien8.de,
	luto@kernel.org
Cc: hpa@zytor.com, dave.hansen@intel.com, tony.luck@intel.com,
	ak@linux.intel.com, ravi.v.shankar@intel.com,
	chang.seok.bae@intel.com,
	Vegard Nossum <vegard.nossum@oracle.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH v10 06/18] x86/entry/64: Introduce the FIND_PERCPU_BASE macro
Date: Thu, 23 Apr 2020 19:21:55 -0400	[thread overview]
Message-ID: <20200423232207.5797-7-sashal@kernel.org> (raw)
In-Reply-To: <20200423232207.5797-1-sashal@kernel.org>

From: "Chang S. Bae" <chang.seok.bae@intel.com>

GS base is used to find per-CPU data in the kernel. But when GS base is
unknown, the per-CPU base can be found from the per_cpu_offset table with a
CPU NR.  The CPU NR is extracted from the limit field of the CPUNODE entry
in GDT, or by the RDPID instruction. This is a prerequisite for using
FSGSBASE in the low level entry code.

Also, add the GAS-compatible RDPID macro as binutils 2.21 does not support
it. Support is added in version 2.27.

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/entry/calling.h    | 34 ++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/inst.h | 15 +++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 0789e13ece905..0eb134e18b7a9 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -6,6 +6,7 @@
 #include <asm/percpu.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
+#include <asm/inst.h>
 
 /*
 
@@ -347,6 +348,39 @@ For 32-bit we have the following conventions - kernel is built with
 #endif
 .endm
 
+#ifdef CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+	movq	$__CPUNODE_SEG, \reg
+	lsl	\reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GS base value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro GET_PERCPU_BASE reg:req
+	ALTERNATIVE \
+		"LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+		"RDPID	\reg", \
+		X86_FEATURE_RDPID
+	andq	$VDSO_CPUNODE_MASK, \reg
+	movq	__per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro GET_PERCPU_BASE reg:req
+	movq	pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
+
 /*
  * This does 'call enter_from_user_mode' unless we can avoid it based on
  * kernel config or using the static jump infrastructure.
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796da07f88..d063841a17e39 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -306,6 +306,21 @@
 	.endif
 	MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
 	.endm
+
+.macro RDPID opd
+	REG_TYPE rdpid_opd_type \opd
+	.if rdpid_opd_type == REG_TYPE_R64
+	R64_NUM rdpid_opd \opd
+	.else
+	R32_NUM rdpid_opd \opd
+	.endif
+	.byte 0xf3
+	.if rdpid_opd > 7
+	PFX_REX rdpid_opd 0
+	.endif
+	.byte 0x0f, 0xc7
+	MODRM 0xc0 rdpid_opd 0x7
+.endm
 #endif
 
 #endif
-- 
2.20.1


  parent reply	other threads:[~2020-04-23 23:22 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-23 23:21 [PATCH v10 00/18] Enable FSGSBASE instructions Sasha Levin
2020-04-23 23:21 ` [PATCH v10 01/18] x86/ptrace: Prevent ptrace from clearing the FS/GS selector Sasha Levin
2020-04-25 22:46   ` Andy Lutomirski
2020-04-23 23:21 ` [PATCH v10 02/18] selftests/x86/fsgsbase: Test GS selector on ptracer-induced GS base write Sasha Levin
2020-04-23 23:21 ` [PATCH v10 03/18] x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE Sasha Levin
2020-04-23 23:21 ` [PATCH v10 04/18] x86/entry/64: Clean up paranoid exit Sasha Levin
2020-04-23 23:21 ` [PATCH v10 05/18] x86/entry/64: Switch CR3 before SWAPGS in paranoid entry Sasha Levin
2020-04-23 23:21 ` Sasha Levin [this message]
2020-04-23 23:21 ` [PATCH v10 07/18] x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit Sasha Levin
2020-04-23 23:21 ` [PATCH v10 08/18] x86/entry/64: Document GSBASE handling in the paranoid path Sasha Levin
2020-04-23 23:21 ` [PATCH v10 09/18] x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions Sasha Levin
2020-04-23 23:21 ` [PATCH v10 10/18] x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions Sasha Levin
2020-04-23 23:22 ` [PATCH v10 11/18] x86/fsgsbase/64: Use FSGSBASE in switch_to() if available Sasha Levin
2020-04-23 23:22 ` [PATCH v10 12/18] x86/fsgsbase/64: move save_fsgs to header file Sasha Levin
2020-04-23 23:22 ` [PATCH v10 13/18] x86/fsgsbase/64: Use FSGSBASE instructions on thread copy and ptrace Sasha Levin
2020-04-23 23:22 ` [PATCH v10 14/18] x86/speculation/swapgs: Check FSGSBASE in enabling SWAPGS mitigation Sasha Levin
2020-04-23 23:22 ` [PATCH v10 15/18] selftests/x86/fsgsbase: Test ptracer-induced GS base write with FSGSBASE Sasha Levin
2020-04-23 23:22 ` [PATCH v10 16/18] x86/fsgsbase/64: Enable FSGSBASE on 64bit by default and add a chicken bit Sasha Levin
2020-04-23 23:22 ` [PATCH v10 17/18] x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 Sasha Levin
2020-04-23 23:22 ` [PATCH v10 18/18] Documentation/x86/64: Add documentation for GS/FS addressing mode Sasha Levin
2020-05-10  8:09 ` [PATCH v10 00/18] Enable FSGSBASE instructions Vegard Nossum
2020-05-10  8:29   ` Vegard Nossum
2020-05-10 10:15     ` Thomas Gleixner
2020-05-10 14:17       ` Sasha Levin
2020-05-11  0:48     ` Andi Kleen
2020-05-11  0:50       ` Andi Kleen
2020-05-11  5:03         ` Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200423232207.5797-7-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=ak@linux.intel.com \
    --cc=bp@alien8.de \
    --cc=chang.seok.bae@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=ravi.v.shankar@intel.com \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=vegard.nossum@oracle.com \
    --subject='Re: [PATCH v10 06/18] x86/entry/64: Introduce the FIND_PERCPU_BASE macro' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox