linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: bjorn.andersson@linaro.org, ohad@wizery.com,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com
Cc: loic.pallardy@st.com, arnaud.pouliquen@st.com,
	linux-remoteproc@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 03/12] remoteproc: stm32: Decouple rproc from DT parsing
Date: Fri, 24 Apr 2020 14:24:56 -0600	[thread overview]
Message-ID: <20200424202505.29562-4-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20200424202505.29562-1-mathieu.poirier@linaro.org>

Remove the remote processor from the process of parsing the device tree
since (1) there is no correlation between them and (2) to use the
information that was gathered to make a decision on whether to
synchronise with the M4 or not.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/remoteproc/stm32_rproc.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
index 1ac90adba9b1..57a426ea620b 100644
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@@ -538,12 +538,11 @@ static int stm32_rproc_get_syscon(struct device_node *np, const char *prop,
 	return err;
 }
 
-static int stm32_rproc_parse_dt(struct platform_device *pdev)
+static int stm32_rproc_parse_dt(struct platform_device *pdev,
+				struct stm32_rproc *ddata, bool *auto_boot)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct rproc *rproc = platform_get_drvdata(pdev);
-	struct stm32_rproc *ddata = rproc->priv;
 	struct stm32_syscon tz;
 	unsigned int tzen;
 	int err, irq;
@@ -589,7 +588,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev)
 
 	err = regmap_read(tz.map, tz.reg, &tzen);
 	if (err) {
-		dev_err(&rproc->dev, "failed to read tzen\n");
+		dev_err(dev, "failed to read tzen\n");
 		return err;
 	}
 	ddata->secured_soc = tzen & tz.mask;
@@ -605,7 +604,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev)
 	if (err)
 		dev_info(dev, "failed to get pdds\n");
 
-	rproc->auto_boot = of_property_read_bool(np, "st,auto-boot");
+	*auto_boot = of_property_read_bool(np, "st,auto-boot");
 
 	return stm32_rproc_of_memory_translations(pdev, ddata);
 }
@@ -616,6 +615,7 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 	struct stm32_rproc *ddata;
 	struct device_node *np = dev->of_node;
 	struct rproc *rproc;
+	bool auto_boot = false;
 	int ret;
 
 	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
@@ -626,9 +626,16 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 	if (!rproc)
 		return -ENOMEM;
 
+	ddata = rproc->priv;
+
 	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
+
+	ret = stm32_rproc_parse_dt(pdev, ddata, &auto_boot);
+	if (ret)
+		goto free_rproc;
+
+	rproc->auto_boot = auto_boot;
 	rproc->has_iommu = false;
-	ddata = rproc->priv;
 	ddata->workqueue = create_workqueue(dev_name(dev));
 	if (!ddata->workqueue) {
 		dev_err(dev, "cannot create workqueue\n");
@@ -638,13 +645,9 @@ static int stm32_rproc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rproc);
 
-	ret = stm32_rproc_parse_dt(pdev);
-	if (ret)
-		goto free_wkq;
-
 	ret = stm32_rproc_request_mbox(rproc);
 	if (ret)
-		goto free_rproc;
+		goto free_wkq;
 
 	ret = rproc_add(rproc);
 	if (ret)
-- 
2.20.1


  parent reply	other threads:[~2020-04-24 20:25 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-24 20:24 [PATCH v2 00/12] remoteproc: stm32: Add support for synchronising with M4 Mathieu Poirier
2020-04-24 20:24 ` [PATCH v2 01/12] remoteproc: stm32: Decouple rproc from memory translation Mathieu Poirier
2020-05-14  4:57   ` Bjorn Andersson
2020-04-24 20:24 ` [PATCH v2 02/12] remoteproc: stm32: Request IRQ with platform device Mathieu Poirier
2020-05-14  4:57   ` Bjorn Andersson
2020-04-24 20:24 ` Mathieu Poirier [this message]
2020-04-29 13:37   ` [PATCH v2 03/12] remoteproc: stm32: Decouple rproc from DT parsing Arnaud POULIQUEN
2020-04-30 20:58     ` Mathieu Poirier
2020-05-14  4:59   ` Bjorn Andersson
2020-04-24 20:24 ` [PATCH v2 04/12] remoteproc: stm32: Remove memory translation " Mathieu Poirier
2020-05-14  5:03   ` Bjorn Andersson
2020-04-24 20:24 ` [PATCH v2 05/12] remoteproc: stm32: Parse syscon that will manage M4 synchronisation Mathieu Poirier
2020-05-14  5:03   ` Bjorn Andersson
2020-04-24 20:24 ` [PATCH v2 06/12] remoteproc: stm32: Get coprocessor state Mathieu Poirier
2020-04-29 13:38   ` Arnaud POULIQUEN
2020-05-01 17:40     ` Mathieu Poirier
2020-04-24 20:25 ` [PATCH v2 07/12] remoteproc: stm32: Get loaded resource table for synchronisation Mathieu Poirier
2020-04-24 20:25 ` [PATCH v2 08/12] remoteproc: stm32: Introduce new start ops " Mathieu Poirier
2020-04-29 14:50   ` Arnaud POULIQUEN
2020-04-24 20:25 ` [PATCH v2 09/12] remoteproc: stm32: Update M4 state in stm32_rproc_stop() Mathieu Poirier
2020-04-29 14:52   ` Arnaud POULIQUEN
2020-04-24 20:25 ` [PATCH v2 10/12] remoteproc: stm32: Introduce new parse fw ops for synchronisation Mathieu Poirier
2020-05-14  5:13   ` Bjorn Andersson
2020-04-24 20:25 ` [PATCH v2 11/12] remoteproc: stm32: Introduce new loaded rsc " Mathieu Poirier
2020-05-14  5:15   ` Bjorn Andersson
2020-04-24 20:25 ` [PATCH v2 12/12] remoteproc: stm32: Set synchronisation state machine if needed Mathieu Poirier
2020-04-29 14:47   ` Arnaud POULIQUEN
2020-05-01 17:54     ` Mathieu Poirier
2020-04-29 15:08 ` [PATCH v2 00/12] remoteproc: stm32: Add support for synchronising with M4 Arnaud POULIQUEN
2020-05-01 17:59   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200424202505.29562-4-mathieu.poirier@linaro.org \
    --to=mathieu.poirier@linaro.org \
    --cc=alexandre.torgue@st.com \
    --cc=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=loic.pallardy@st.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).