Hi, I don't see any PATCHv5 (with or without RESEND) for bq25150 and lore does not see anything either: https://lore.kernel.org/linux-pm/?q=PATCH+v5+0%2F3%5D+BQ25150%2F155+Charger -- Sebastian On Tue, Mar 24, 2020 at 10:14:20AM -0500, Ricardo Rivera-Matos wrote: > bump > > On 3/4/20 11:40 AM, Ricardo Rivera-Matos wrote: > > Hello, > > > > This v5 series picks up on the development that Dan Murphy > > began with the power_supply framework and > > bq2515x_charger driver. This series incorporates the changes > > suggested by Sebastien Reichel in v4. > > > > Datasheets for these devices can be found at: > > http://www.ti.com/lit/ds/symlink/bq25150.pdf > > http://www.ti.com/lit/ds/symlink/bq25155.pdf > > > > Thanks, Ricardo > > > > Dan Murphy (1): > > power_supply: Add additional health properties to the header > > > > Ricardo Rivera-Matos (2): > > Add the bindings for the bq25150 and bq25155 500mA charging ICs from > > Texas Instruments. > > power: supply: bq25150 introduce the bq25150 > > > > Documentation/ABI/testing/sysfs-class-power | 2 +- > > .../bindings/power/supply/bq2515x.yaml | 99 ++ > > drivers/power/supply/Kconfig | 8 + > > drivers/power/supply/Makefile | 1 + > > drivers/power/supply/bq2515x_charger.c | 1170 +++++++++++++++++ > > drivers/power/supply/power_supply_sysfs.c | 2 +- > > include/linux/power_supply.h | 3 + > > 7 files changed, 1283 insertions(+), 2 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml > > create mode 100644 drivers/power/supply/bq2515x_charger.c > >