linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stanley Chu <stanley.chu@mediatek.com>
To: <linux-scsi@vger.kernel.org>, <martin.petersen@oracle.com>,
	<avri.altman@wdc.com>, <alim.akhtar@samsung.com>,
	<jejb@linux.ibm.com>, <asutoshd@codeaurora.org>
Cc: <beanhuo@micron.com>, <cang@codeaurora.org>,
	<matthias.bgg@gmail.com>, <bvanassche@acm.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <kuohong.wang@mediatek.com>,
	<peter.wang@mediatek.com>, <chun-hung.wu@mediatek.com>,
	<andy.teng@mediatek.com>, Stanley Chu <stanley.chu@mediatek.com>
Subject: [PATCH v6 0/8] scsi: ufs: support LU Dedicated buffer mode for WriteBooster
Date: Mon, 4 May 2020 22:56:14 +0800	[thread overview]
Message-ID: <20200504145622.13895-1-stanley.chu@mediatek.com> (raw)

Hi,
This patchset adds LU dedicated buffer mode support for WriteBooster.
In the meanwhile, enable WriteBooster capability on MediaTek UFS platforms.

v5 -> v6:
  - Remove descriptor length check in ufshcd_wb_probe() because the device quirk shall be added only after WriteBooster support is confirmed in attached ore-3.1 UFS device.

v4 -> v5:
  - Check LUN ID for available WriteBooster buffer only from 0 to 7 according to spec (Avri Altman)
  - Skip checking any possible errors from ufshcd_read_unit_desc_param(hba, lun, UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS) in ufshcd_wb_probe() and check returned d_lu_wb_buf_alloc (shall be zero if error happens) (Avri Altman)

v3 -> v4:
  - Introduce "fixup_dev_quirks" vops to allow vendors to fix and modify device quirks, and provide an initial vendor-specific device quirk table on MediaTek UFS platforms
  - Avoid relying on common device quirk table for pre-3.1 UFS device with non-standard WriteBooster support (Can Guo)
  - Fix comments for ufshcd_wb_probe() (Can Guo)
  - Make ufshcd_wb_get_flag_index() inline and fix ufshcd_is_wb_flags() (Avri Altman)

v2 -> v3:
  - Introduce a device quirk to support WriteBooster in pre-3.1 UFS devices (Avri Altman)
  - Fix WriteBooster related sysfs nodes. Now all WriteBooster related sysfs nodes are specifically mapped to the LUN with WriteBooster enabled in LU Dedicated buffer mode (Avri Altman)

v1 -> v2:
  - Change the definition name of WriteBooster buffer mode to correspond to specification (Bean Huo)
  - Add patch #5: "scsi: ufs: cleanup WriteBooster feature"

Stanley Chu (8):
  scsi: ufs: enable WriteBooster on some pre-3.1 UFS devices
  scsi: ufs: introduce fixup_dev_quirks vops
  scsi: ufs: export ufs_fixup_device_setup() function
  scsi: ufs-mediatek: add fixup_dev_quirks vops
  scsi: ufs: add "index" in parameter list of ufshcd_query_flag()
  scsi: ufs: add LU Dedicated buffer mode support for WriteBooster
  scsi: ufs-mediatek: enable WriteBooster capability
  scsi: ufs: cleanup WriteBooster feature

 drivers/scsi/ufs/ufs-mediatek.c |  25 +++++-
 drivers/scsi/ufs/ufs-sysfs.c    |  11 ++-
 drivers/scsi/ufs/ufs.h          |  10 +++
 drivers/scsi/ufs/ufs_quirks.h   |   7 ++
 drivers/scsi/ufs/ufshcd.c       | 152 ++++++++++++++++++++------------
 drivers/scsi/ufs/ufshcd.h       |  20 ++++-
 6 files changed, 163 insertions(+), 62 deletions(-)

-- 
2.18.0

             reply	other threads:[~2020-05-04 14:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-04 14:56 Stanley Chu [this message]
2020-05-04 14:56 ` [PATCH v6 1/8] scsi: ufs: enable WriteBooster on some pre-3.1 UFS devices Stanley Chu
2020-05-04 14:56 ` [PATCH v6 2/8] scsi: ufs: introduce fixup_dev_quirks vops Stanley Chu
2020-05-04 14:56 ` [PATCH v6 3/8] scsi: ufs: export ufs_fixup_device_setup() function Stanley Chu
2020-05-04 14:56 ` [PATCH v6 4/8] scsi: ufs-mediatek: add fixup_dev_quirks vops Stanley Chu
2020-05-04 14:56 ` [PATCH v6 5/8] scsi: ufs: add "index" in parameter list of ufshcd_query_flag() Stanley Chu
2020-05-04 14:56 ` [PATCH v6 6/8] scsi: ufs: add LU Dedicated buffer mode support for WriteBooster Stanley Chu
2020-05-04 19:11   ` [EXT] " Bean Huo (beanhuo)
2020-05-04 14:56 ` [PATCH v6 7/8] scsi: ufs-mediatek: enable WriteBooster capability Stanley Chu
2020-05-04 14:56 ` [PATCH v6 8/8] scsi: ufs: cleanup WriteBooster feature Stanley Chu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200504145622.13895-1-stanley.chu@mediatek.com \
    --to=stanley.chu@mediatek.com \
    --cc=alim.akhtar@samsung.com \
    --cc=andy.teng@mediatek.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=chun-hung.wu@mediatek.com \
    --cc=jejb@linux.ibm.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=matthias.bgg@gmail.com \
    --cc=peter.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).