From: Al Cooper <alcooperx@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Al Cooper <alcooperx@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-usb@vger.kernel.org,
Mathias Nyman <mathias.nyman@intel.com>,
Rob Herring <robh+dt@kernel.org>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v10 2/5] dt-bindings: Add Broadcom STB USB support
Date: Tue, 12 May 2020 11:00:16 -0400 [thread overview]
Message-ID: <20200512150019.25903-3-alcooperx@gmail.com> (raw)
In-Reply-To: <20200512150019.25903-1-alcooperx@gmail.com>
Add DT bindings for Broadcom STB USB EHCI and XHCI drivers.
NOTE: The OHCI driver is not included because it uses the generic
platform driver.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../bindings/usb/brcm,bcm7445-ehci.yaml | 59 +++++++++++++++++++
.../devicetree/bindings/usb/usb-xhci.txt | 1 +
2 files changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
new file mode 100644
index 000000000000..2a9acf2b5a64
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB EHCI Controller Device Tree Bindings
+
+allOf:
+ - $ref: "usb-hcd.yaml"
+
+maintainers:
+ - Al Cooper <alcooperx@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,bcm7445-ehci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: Clock specifier for the EHCI clock
+
+ clock-names:
+ const: sw_usb
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usbphy
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - phys
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ usb@f0b00300 {
+ compatible = "brcm,bcm7445-ehci";
+ reg = <0xf0b00300 0xa8>;
+ interrupts = <0x0 0x5a 0x0>;
+ phys = <&usbphy_0 0x0>;
+ phy-names = "usbphy";
+ clocks = <&usb20>;
+ clock-names = "sw_usb";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index dc025f126d71..23e89d798b1b 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -24,6 +24,7 @@ Required properties:
device
- "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 or RZ/G2 compatible
device
+ - "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI
- "xhci-platform" (deprecated)
When compatible with the generic version, nodes must list the
--
2.17.1
next prev parent reply other threads:[~2020-05-12 15:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-12 15:00 [PATCH v10 0/5] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's Al Cooper
2020-05-12 15:00 ` [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile Al Cooper
2020-05-13 12:26 ` Greg Kroah-Hartman
2020-05-13 15:08 ` Florian Fainelli
2020-05-13 15:26 ` Andy Shevchenko
2020-05-13 15:28 ` Florian Fainelli
2020-05-13 16:27 ` Greg Kroah-Hartman
2020-05-13 16:31 ` Florian Fainelli
2020-05-13 17:05 ` Greg Kroah-Hartman
2020-05-13 17:39 ` Alan Stern
2020-05-13 17:46 ` Florian Fainelli
2020-05-13 19:42 ` Alan Cooper
2020-05-20 17:29 ` Alan Cooper
2020-05-21 6:09 ` Greg Kroah-Hartman
2020-05-21 15:37 ` Florian Fainelli
2020-05-12 15:00 ` Al Cooper [this message]
2020-05-12 15:00 ` [PATCH v10 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's Al Cooper
2020-05-12 15:00 ` [PATCH v10 4/5] usb: ehci: Add new EHCI driver " Al Cooper
2020-05-12 15:00 ` [PATCH v10 5/5] usb: host: Add ability to build new Broadcom STB USB drivers Al Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512150019.25903-3-alcooperx@gmail.com \
--to=alcooperx@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).