linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Georgi Djakov <georgi.djakov@linaro.org>
Cc: linux-pm@vger.kernel.org, evgreen@chromium.org, mka@chromium.org,
	akashast@codeaurora.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] interconnect: Add helpers for enabling/disabling a path
Date: Tue, 12 May 2020 14:59:15 -0700	[thread overview]
Message-ID: <20200512215915.GL2165@builder.lan> (raw)
In-Reply-To: <20200507120846.8354-1-georgi.djakov@linaro.org>

On Thu 07 May 05:08 PDT 2020, Georgi Djakov wrote:

> There is a repeated pattern in multiple drivers where they want to switch
> the bandwidth between zero and some other value. This is happening often
> in the suspend/resume callbacks. Let's add helper functions to enable and
> disable the path, so that callers don't have to take care of remembering
> the bandwidth values and handle this in the framework instead.
> 
> With this patch the users can call icc_disable() and icc_enable() to lower
> their bandwidth request to zero and then restore it back to it's previous
> value.
> 
> Suggested-by: Evan Green <evgreen@chromium.org>
> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>

Nice

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> v2: https://lore.kernel.org/r/20200428091650.27669-1-georgi.djakov@linaro.org/
> * Extract the common code into __icc_enable() (Matthias)
> 
> 
>  drivers/interconnect/core.c     | 39 ++++++++++++++++++++++++++++++++-
>  drivers/interconnect/internal.h |  2 ++
>  include/linux/interconnect.h    | 12 ++++++++++
>  3 files changed, 52 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
> index f5699ed34e43..d5e0f93c942d 100644
> --- a/drivers/interconnect/core.c
> +++ b/drivers/interconnect/core.c
> @@ -158,6 +158,7 @@ static struct icc_path *path_init(struct device *dev, struct icc_node *dst,
>  		hlist_add_head(&path->reqs[i].req_node, &node->req_list);
>  		path->reqs[i].node = node;
>  		path->reqs[i].dev = dev;
> +		path->reqs[i].enabled = true;
>  		/* reference to previous node was saved during path traversal */
>  		node = node->reverse;
>  	}
> @@ -249,9 +250,12 @@ static int aggregate_requests(struct icc_node *node)
>  	if (p->pre_aggregate)
>  		p->pre_aggregate(node);
>  
> -	hlist_for_each_entry(r, &node->req_list, req_node)
> +	hlist_for_each_entry(r, &node->req_list, req_node) {
> +		if (!r->enabled)
> +			continue;
>  		p->aggregate(node, r->tag, r->avg_bw, r->peak_bw,
>  			     &node->avg_bw, &node->peak_bw);
> +	}
>  
>  	return 0;
>  }
> @@ -571,6 +575,39 @@ int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw)
>  }
>  EXPORT_SYMBOL_GPL(icc_set_bw);
>  
> +static int __icc_enable(struct icc_path *path, bool enable)
> +{
> +	int i;
> +
> +	if (!path)
> +		return 0;
> +
> +	if (WARN_ON(IS_ERR(path) || !path->num_nodes))
> +		return -EINVAL;
> +
> +	mutex_lock(&icc_lock);
> +
> +	for (i = 0; i < path->num_nodes; i++)
> +		path->reqs[i].enabled = enable;
> +
> +	mutex_unlock(&icc_lock);
> +
> +	return icc_set_bw(path, path->reqs[0].avg_bw,
> +			  path->reqs[0].peak_bw);
> +}
> +
> +int icc_disable(struct icc_path *path)
> +{
> +	return __icc_enable(path, false);
> +}
> +EXPORT_SYMBOL_GPL(icc_disable);
> +
> +int icc_enable(struct icc_path *path)
> +{
> +	return __icc_enable(path, true);
> +}
> +EXPORT_SYMBOL_GPL(icc_enable);
> +
>  /**
>   * icc_get() - return a handle for path between two endpoints
>   * @dev: the device requesting the path
> diff --git a/drivers/interconnect/internal.h b/drivers/interconnect/internal.h
> index bf18cb7239df..f5f82a5c939e 100644
> --- a/drivers/interconnect/internal.h
> +++ b/drivers/interconnect/internal.h
> @@ -14,6 +14,7 @@
>   * @req_node: entry in list of requests for the particular @node
>   * @node: the interconnect node to which this constraint applies
>   * @dev: reference to the device that sets the constraints
> + * @enabled: indicates whether the path with this request is enabled
>   * @tag: path tag (optional)
>   * @avg_bw: an integer describing the average bandwidth in kBps
>   * @peak_bw: an integer describing the peak bandwidth in kBps
> @@ -22,6 +23,7 @@ struct icc_req {
>  	struct hlist_node req_node;
>  	struct icc_node *node;
>  	struct device *dev;
> +	bool enabled;
>  	u32 tag;
>  	u32 avg_bw;
>  	u32 peak_bw;
> diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h
> index 770692421f4c..2b7b331c9354 100644
> --- a/include/linux/interconnect.h
> +++ b/include/linux/interconnect.h
> @@ -30,6 +30,8 @@ struct icc_path *icc_get(struct device *dev, const int src_id,
>  struct icc_path *of_icc_get(struct device *dev, const char *name);
>  struct icc_path *devm_of_icc_get(struct device *dev, const char *name);
>  void icc_put(struct icc_path *path);
> +int icc_disable(struct icc_path *path);
> +int icc_enable(struct icc_path *path);
>  int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw);
>  void icc_set_tag(struct icc_path *path, u32 tag);
>  
> @@ -57,6 +59,16 @@ static inline void icc_put(struct icc_path *path)
>  {
>  }
>  
> +static inline int icc_disable(struct icc_path *path)
> +{
> +	return 0;
> +}
> +
> +static inline int icc_enable(struct icc_path *path)
> +{
> +	return 0;
> +}
> +
>  static inline int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw)
>  {
>  	return 0;

      parent reply	other threads:[~2020-05-12 22:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-07 12:08 [PATCH v2] interconnect: Add helpers for enabling/disabling a path Georgi Djakov
2020-05-07 15:57 ` Matthias Kaehlcke
2020-05-12 21:59 ` Bjorn Andersson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200512215915.GL2165@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=akashast@codeaurora.org \
    --cc=evgreen@chromium.org \
    --cc=georgi.djakov@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).