[PATCH 1/5] dt-bindings: reset: ocelot: Add Sparx5 support

[Lars Povlsen <lars.povlsen@microchip.com>]

This adds the support for the Sparx5 SoC.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 .../devicetree/bindings/power/reset/ocelot-reset.txt       | 7 +++++--
 MAINTAINERS                                                | 1 +
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
index 1b4213eb34731..4d530d8154848 100644
--- a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -1,10 +1,13 @@
 Microsemi Ocelot reset controller

 The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
-SoC MIPS core.
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.

 Required Properties:
- - compatible: "mscc,ocelot-chip-reset"
+ - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset"

 Example:
 	reset@1070008 {
diff --git a/MAINTAINERS b/MAINTAINERS
index 5aa28d6e39d4f..1db598723a1d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11230,6 +11230,7 @@ M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/mips/mscc.txt
+F:	Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
 F:	arch/mips/boot/dts/mscc/
 F:	arch/mips/configs/generic/board-ocelot.config
 F:	arch/mips/generic/board-ocelot.c
--
2.26.2