From: Leonardo Bras <leobras.c@gmail.com>
To: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Allison Randal <allison@lohutok.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thomas Gleixner <tglx@linutronix.de>,
Nicholas Piggin <npiggin@gmail.com>,
Leonardo Bras <leobras.c@gmail.com>,
Nathan Lynch <nathanl@linux.ibm.com>,
"Gautham R. Shenoy" <ego@linux.vnet.ibm.com>,
Nadav Amit <namit@vmware.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/2] powerpc/rtas: Move type/struct definitions from rtas.h into rtas-types.h
Date: Wed, 13 May 2020 22:12:44 -0300 [thread overview]
Message-ID: <20200514011245.127174-2-leobras.c@gmail.com> (raw)
In-Reply-To: <20200514011245.127174-1-leobras.c@gmail.com>
In order to get any rtas* struct into other headers, including rtas.h
may cause a lot of errors, regarding include dependency needed for
inline functions.
Create rtas-types.h and move there all type/struct definitions
from rtas.h, then include rtas-types.h into rtas.h.
Also, as suggested by checkpath.pl, replace uint8_t for u8, and keep
the same type pattern for the whole file, as they are the same
according to powerpc/boot/types.h.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
---
arch/powerpc/include/asm/rtas-types.h | 126 ++++++++++++++++++++++++++
arch/powerpc/include/asm/rtas.h | 118 +-----------------------
2 files changed, 127 insertions(+), 117 deletions(-)
create mode 100644 arch/powerpc/include/asm/rtas-types.h
diff --git a/arch/powerpc/include/asm/rtas-types.h b/arch/powerpc/include/asm/rtas-types.h
new file mode 100644
index 000000000000..87354e28f160
--- /dev/null
+++ b/arch/powerpc/include/asm/rtas-types.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _POWERPC_RTAS_TYPES_H
+#define _POWERPC_RTAS_TYPES_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock_types.h>
+
+typedef __be32 rtas_arg_t;
+
+struct rtas_args {
+ __be32 token;
+ __be32 nargs;
+ __be32 nret;
+ rtas_arg_t args[16];
+ rtas_arg_t *rets; /* Pointer to return values in args[]. */
+};
+
+struct rtas_t {
+ unsigned long entry; /* physical address pointer */
+ unsigned long base; /* physical address pointer */
+ unsigned long size;
+ arch_spinlock_t lock;
+ struct rtas_args args;
+ struct device_node *dev; /* virtual address pointer */
+};
+
+struct rtas_suspend_me_data {
+ atomic_t working; /* number of cpus accessing this struct */
+ atomic_t done;
+ int token; /* ibm,suspend-me */
+ atomic_t error;
+ struct completion *complete; /* wait on this until working == 0 */
+};
+
+struct rtas_error_log {
+ /* Byte 0 */
+ u8 byte0; /* Architectural version */
+
+ /* Byte 1 */
+ u8 byte1;
+ /* XXXXXXXX
+ * XXX 3: Severity level of error
+ * XX 2: Degree of recovery
+ * X 1: Extended log present?
+ * XX 2: Reserved
+ */
+
+ /* Byte 2 */
+ u8 byte2;
+ /* XXXXXXXX
+ * XXXX 4: Initiator of event
+ * XXXX 4: Target of failed operation
+ */
+ u8 byte3; /* General event or error*/
+ __be32 extended_log_length; /* length in bytes */
+ unsigned char buffer[1]; /* Start of extended log */
+ /* Variable length. */
+};
+
+/* RTAS general extended event log, Version 6. The extended log starts
+ * from "buffer" field of struct rtas_error_log defined above.
+ */
+struct rtas_ext_event_log_v6 {
+ /* Byte 0 */
+ u8 byte0;
+ /* XXXXXXXX
+ * X 1: Log valid
+ * X 1: Unrecoverable error
+ * X 1: Recoverable (correctable or successfully retried)
+ * X 1: Bypassed unrecoverable error (degraded operation)
+ * X 1: Predictive error
+ * X 1: "New" log (always 1 for data returned from RTAS)
+ * X 1: Big Endian
+ * X 1: Reserved
+ */
+
+ /* Byte 1 */
+ u8 byte1; /* reserved */
+
+ /* Byte 2 */
+ u8 byte2;
+ /* XXXXXXXX
+ * X 1: Set to 1 (indicating log is in PowerPC format)
+ * XXX 3: Reserved
+ * XXXX 4: Log format used for bytes 12-2047
+ */
+
+ /* Byte 3 */
+ u8 byte3; /* reserved */
+ /* Byte 4-11 */
+ u8 reserved[8]; /* reserved */
+ /* Byte 12-15 */
+ __be32 company_id; /* Company ID of the company */
+ /* that defines the format for */
+ /* the vendor specific log type */
+ /* Byte 16-end of log */
+ u8 vendor_log[1]; /* Start of vendor specific log */
+ /* Variable length. */
+};
+
+/* Vendor specific Platform Event Log Format, Version 6, section header */
+struct pseries_errorlog {
+ __be16 id; /* 0x00 2-byte ASCII section ID */
+ __be16 length; /* 0x02 Section length in bytes */
+ u8 version; /* 0x04 Section version */
+ u8 subtype; /* 0x05 Section subtype */
+ __be16 creator_component; /* 0x06 Creator component ID */
+ u8 data[]; /* 0x08 Start of section data */
+};
+
+/* RTAS pseries hotplug errorlog section */
+struct pseries_hp_errorlog {
+ u8 resource;
+ u8 action;
+ u8 id_type;
+ u8 reserved;
+ union {
+ __be32 drc_index;
+ __be32 drc_count;
+ struct { __be32 count, index; } ic;
+ char drc_name[1];
+ } _drc_u;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_RTAS_TYPES_H */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 3c1887351c71..c35c5350b7e4 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -5,6 +5,7 @@
#include <linux/spinlock.h>
#include <asm/page.h>
+#include <asm/rtas-types.h>
#include <linux/time.h>
#include <linux/cpumask.h>
@@ -42,33 +43,6 @@
*
*/
-typedef __be32 rtas_arg_t;
-
-struct rtas_args {
- __be32 token;
- __be32 nargs;
- __be32 nret;
- rtas_arg_t args[16];
- rtas_arg_t *rets; /* Pointer to return values in args[]. */
-};
-
-struct rtas_t {
- unsigned long entry; /* physical address pointer */
- unsigned long base; /* physical address pointer */
- unsigned long size;
- arch_spinlock_t lock;
- struct rtas_args args;
- struct device_node *dev; /* virtual address pointer */
-};
-
-struct rtas_suspend_me_data {
- atomic_t working; /* number of cpus accessing this struct */
- atomic_t done;
- int token; /* ibm,suspend-me */
- atomic_t error;
- struct completion *complete; /* wait on this until working == 0 */
-};
-
/* RTAS event classes */
#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */
#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */
@@ -148,31 +122,6 @@ struct rtas_suspend_me_data {
/* RTAS check-exception vector offset */
#define RTAS_VECTOR_EXTERNAL_INTERRUPT 0x500
-struct rtas_error_log {
- /* Byte 0 */
- uint8_t byte0; /* Architectural version */
-
- /* Byte 1 */
- uint8_t byte1;
- /* XXXXXXXX
- * XXX 3: Severity level of error
- * XX 2: Degree of recovery
- * X 1: Extended log present?
- * XX 2: Reserved
- */
-
- /* Byte 2 */
- uint8_t byte2;
- /* XXXXXXXX
- * XXXX 4: Initiator of event
- * XXXX 4: Target of failed operation
- */
- uint8_t byte3; /* General event or error*/
- __be32 extended_log_length; /* length in bytes */
- unsigned char buffer[1]; /* Start of extended log */
- /* Variable length. */
-};
-
static inline uint8_t rtas_error_severity(const struct rtas_error_log *elog)
{
return (elog->byte1 & 0xE0) >> 5;
@@ -212,47 +161,6 @@ uint32_t rtas_error_extended_log_length(const struct rtas_error_log *elog)
#define RTAS_V6EXT_COMPANY_ID_IBM (('I' << 24) | ('B' << 16) | ('M' << 8))
-/* RTAS general extended event log, Version 6. The extended log starts
- * from "buffer" field of struct rtas_error_log defined above.
- */
-struct rtas_ext_event_log_v6 {
- /* Byte 0 */
- uint8_t byte0;
- /* XXXXXXXX
- * X 1: Log valid
- * X 1: Unrecoverable error
- * X 1: Recoverable (correctable or successfully retried)
- * X 1: Bypassed unrecoverable error (degraded operation)
- * X 1: Predictive error
- * X 1: "New" log (always 1 for data returned from RTAS)
- * X 1: Big Endian
- * X 1: Reserved
- */
-
- /* Byte 1 */
- uint8_t byte1; /* reserved */
-
- /* Byte 2 */
- uint8_t byte2;
- /* XXXXXXXX
- * X 1: Set to 1 (indicating log is in PowerPC format)
- * XXX 3: Reserved
- * XXXX 4: Log format used for bytes 12-2047
- */
-
- /* Byte 3 */
- uint8_t byte3; /* reserved */
- /* Byte 4-11 */
- uint8_t reserved[8]; /* reserved */
- /* Byte 12-15 */
- __be32 company_id; /* Company ID of the company */
- /* that defines the format for */
- /* the vendor specific log type */
- /* Byte 16-end of log */
- uint8_t vendor_log[1]; /* Start of vendor specific log */
- /* Variable length. */
-};
-
static
inline uint8_t rtas_ext_event_log_format(struct rtas_ext_event_log_v6 *ext_log)
{
@@ -287,16 +195,6 @@ inline uint32_t rtas_ext_event_company_id(struct rtas_ext_event_log_v6 *ext_log)
#define PSERIES_ELOG_SECT_ID_HOTPLUG (('H' << 8) | 'P')
#define PSERIES_ELOG_SECT_ID_MCE (('M' << 8) | 'C')
-/* Vendor specific Platform Event Log Format, Version 6, section header */
-struct pseries_errorlog {
- __be16 id; /* 0x00 2-byte ASCII section ID */
- __be16 length; /* 0x02 Section length in bytes */
- uint8_t version; /* 0x04 Section version */
- uint8_t subtype; /* 0x05 Section subtype */
- __be16 creator_component; /* 0x06 Creator component ID */
- uint8_t data[]; /* 0x08 Start of section data */
-};
-
static
inline uint16_t pseries_errorlog_id(struct pseries_errorlog *sect)
{
@@ -309,20 +207,6 @@ inline uint16_t pseries_errorlog_length(struct pseries_errorlog *sect)
return be16_to_cpu(sect->length);
}
-/* RTAS pseries hotplug errorlog section */
-struct pseries_hp_errorlog {
- u8 resource;
- u8 action;
- u8 id_type;
- u8 reserved;
- union {
- __be32 drc_index;
- __be32 drc_count;
- struct { __be32 count, index; } ic;
- char drc_name[1];
- } _drc_u;
-};
-
#define PSERIES_HP_ELOG_RESOURCE_CPU 1
#define PSERIES_HP_ELOG_RESOURCE_MEM 2
#define PSERIES_HP_ELOG_RESOURCE_SLOT 3
--
2.25.4
next prev parent reply other threads:[~2020-05-14 1:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 1:12 [PATCH v3 0/2] Implement reentrant rtas call Leonardo Bras
2020-05-14 1:12 ` Leonardo Bras [this message]
2020-05-14 1:12 ` [PATCH v3 2/2] powerpc/rtas: " Leonardo Bras
2020-05-14 18:58 ` Nathan Lynch
2020-05-14 23:28 ` Leonardo Bras
2020-05-15 0:00 ` Leonardo Bras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200514011245.127174-2-leobras.c@gmail.com \
--to=leobras.c@gmail.com \
--cc=allison@lohutok.net \
--cc=benh@kernel.crashing.org \
--cc=ego@linux.vnet.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=namit@vmware.com \
--cc=nathanl@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).