* [PATCH v7] Add matrix keypad driver support for Mediatek SoCs @ 2020-05-14 6:17 Fengping Yu [not found] ` <20200514061747.25466-4-fengping.yu@mediatek.com> ` (2 more replies) 0 siblings, 3 replies; 7+ messages in thread From: Fengping Yu @ 2020-05-14 6:17 UTC (permalink / raw) To: Yingjoe Chen, Dmitry Torokhov, Andy Shevchenko, Marco Felsch Cc: linux-arm-kernel, linux-mediatek, linux-kernel Change since v6: - update keypad device tree document schema fengping.yu (3): dt-bindings: Add keypad devicetree documentation drivers: input: keyboard: Add mtk keypad driver configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=y .../devicetree/bindings/input/mtk-kpd.yaml | 102 ++++++++ arch/arm64/configs/defconfig | 2 + drivers/input/keyboard/Kconfig | 8 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/mtk-kpd.c | 223 ++++++++++++++++++ 5 files changed, 336 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml create mode 100644 drivers/input/keyboard/mtk-kpd.c -- 2.18.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <20200514061747.25466-4-fengping.yu@mediatek.com>]
* Re: [PATCH v7 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=y [not found] ` <20200514061747.25466-4-fengping.yu@mediatek.com> @ 2020-05-14 8:56 ` Marco Felsch 0 siblings, 0 replies; 7+ messages in thread From: Marco Felsch @ 2020-05-14 8:56 UTC (permalink / raw) To: Fengping Yu Cc: Yingjoe Chen, Dmitry Torokhov, Andy Shevchenko, linux-arm-kernel, linux-mediatek, linux-kernel Hi, On 20-05-14 14:17, Fengping Yu wrote: > From: "fengping.yu" <fengping.yu@mediatek.com> > > Add Mediatek matrix keypad support in defconfig. > > Signed-off-by: fengping.yu <fengping.yu@mediatek.com> > --- > arch/arm64/configs/defconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 24e534d85045..f9f0fb489182 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -349,6 +349,8 @@ CONFIG_KEYBOARD_GPIO=y > CONFIG_KEYBOARD_SNVS_PWRKEY=m > CONFIG_KEYBOARD_IMX_SC_KEY=m > CONFIG_KEYBOARD_CROS_EC=y > +CONFIG_KEYBOARD_MTK_KPD=y Why not as module? > +# CONFIG_KEYBOARD_MTK_PMIC is not set Also this is a unrelated add. Regards, Marco > CONFIG_INPUT_TOUCHSCREEN=y > CONFIG_TOUCHSCREEN_ATMEL_MXT=m > CONFIG_INPUT_MISC=y > -- > 2.18.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <20200514061747.25466-3-fengping.yu@mediatek.com>]
* Re: [PATCH v7 2/3] drivers: input: keyboard: Add mtk keypad driver [not found] ` <20200514061747.25466-3-fengping.yu@mediatek.com> @ 2020-05-14 9:24 ` Marco Felsch 2020-05-14 10:27 ` Andy Shevchenko 1 sibling, 0 replies; 7+ messages in thread From: Marco Felsch @ 2020-05-14 9:24 UTC (permalink / raw) To: Fengping Yu Cc: Yingjoe Chen, Dmitry Torokhov, Andy Shevchenko, linux-arm-kernel, linux-mediatek, linux-kernel Hi, I like the evolution of this patch =) On 20-05-14 14:17, Fengping Yu wrote: > From: "fengping.yu" <fengping.yu@mediatek.com> > > This adds matrix keypad support for Mediatek SoCs. > > Signed-off-by: fengping.yu <fengping.yu@mediatek.com> > --- > drivers/input/keyboard/Kconfig | 8 ++ > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/mtk-kpd.c | 223 +++++++++++++++++++++++++++++++ > 3 files changed, 232 insertions(+) > create mode 100644 drivers/input/keyboard/mtk-kpd.c > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index 28de965a08d5..6bae95a5f90b 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -782,6 +782,14 @@ config KEYBOARD_BCM > To compile this driver as a module, choose M here: the > module will be called bcm-keypad. > > +config KEYBOARD_MTK_KPD > + tristate "MediaTek Keypad Support" > + depends on OF && HAVE_CLK > + help > + Say Y here if you want to use the keypad on MediaTek SoCs. > + If unsure, say N. > + To compile this driver as a module, choose M here: the > + module will be called mtk-kpd. > config KEYBOARD_MTK_PMIC > tristate "MediaTek PMIC keys support" > depends on MFD_MT6397 > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index 1d689fdd5c00..6c9d852c377e 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -43,6 +43,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o > obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o > obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o > obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o > +obj-$(CONFIG_KEYBOARD_MTK_KPD) += mtk-kpd.o > obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o > obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o > obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o > diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c > new file mode 100644 > index 000000000000..a538f89d6696 > --- /dev/null > +++ b/drivers/input/keyboard/mtk-kpd.c > @@ -0,0 +1,223 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019 MediaTek Inc. > + * Author Terry Chang <terry.chang@mediatek.com> > + */ > +#include <linux/clk.h> > +#include <linux/input/matrix_keypad.h> > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/property.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/bitops.h> Please sort it alphabetical. > +#define KPD_NAME "mtk-kpd" > + > +#define KP_MEM 0x0004 > +#define KP_DEBOUNCE 0x0018 > + > +#define KPD_DEBOUNCE_MASK GENMASK(13, 0) > +#define KPD_DEBOUNCE_MAX_US 256000 /*256ms */ > +#define KPD_NUM_MEMS 5 > +#define KPD_NUM_BITS 136 /* 4 * 32 + 8 MEM5 only use 8 BITS */ Pls align all define values. Nit, I would also make the names a bit more uniform e.g. - MTK_KPD_NAME - MTK_KPD_MEM - MTK_KPD_DEBOUNCE - MTK_KPD_NUM_MEMS ... > +struct mtk_keypad { > + struct regmap *regmap; > + struct input_dev *input_dev; > + struct clk *clk; > + void __iomem *base; > + bool wakeup; > + u32 n_rows; > + u32 n_cols; > + DECLARE_BITMAP(keymap_state, KPD_NUM_BITS); > +}; > + > +static const struct regmap_config keypad_regmap_cfg = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = sizeof(u32), > + .max_register = 0x0024, IMHO we should specify max_register as decimal value. > +}; > + > +static irqreturn_t kpd_irq_handler(int irq, void *dev_id) > +{ > + struct mtk_keypad *keypad = dev_id; > + unsigned short *keycode = keypad->input_dev->keycode; > + DECLARE_BITMAP(new_state, KPD_NUM_BITS); > + DECLARE_BITMAP(change, KPD_NUM_BITS); > + int bit_nr; > + int pressed; > + unsigned short code; > + > + regmap_raw_read(keypad->regmap, KP_MEM, new_state, KPD_NUM_MEMS); > + > + bitmap_xor(change, new_state, keypad->keymap_state, KPD_NUM_BITS); > + > + for_each_set_bit(bit_nr, change, KPD_NUM_BITS) { > + /* 1: not pressed, 0: pressed */ > + pressed = !test_bit(bit_nr, new_state); > + dev_dbg(&keypad->input_dev->dev, "%s", > + pressed ? "pressed" : "released"); > + > + /* 32bit register only use low 16bit as keypad mem register */ > + code = keycode[bit_nr - 16 * (BITS_TO_U32(bit_nr) - 1)]; > + > + input_report_key(keypad->input_dev, code, pressed); > + input_sync(keypad->input_dev); > + > + dev_dbg(&keypad->input_dev->dev, > + "report Linux keycode = %d\n", code); > + } > + > + bitmap_copy(keypad->keymap_state, new_state, KPD_NUM_BITS); > + > + return IRQ_HANDLED; > +} > + > +static int kpd_pdrv_probe(struct platform_device *pdev) > +{ > + struct mtk_keypad *keypad; > + struct pinctrl *keypad_pinctrl; > + struct pinctrl_state *kpd_default; > + unsigned int irqnr; > + u32 debounce; > + int ret; > + > + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL); > + if (!keypad) > + return -ENOMEM; Missing newline ? > + keypad->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(keypad->base)) > + return PTR_ERR(keypad->base); > + > + keypad->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, > + keypad->base, &keypad_regmap_cfg); Pls align it and make use of devm_regmap_init_mmio(). > + if (IS_ERR(keypad->regmap)) { > + dev_err(&pdev->dev, > + "regmap init failed:%ld\n", PTR_ERR(keypad->regmap)); > + return PTR_ERR(keypad->regmap); > + } > + > + bitmap_fill(keypad->keymap_state, KPD_NUM_BITS); > + > + keypad->input_dev = devm_input_allocate_device(&pdev->dev); > + if (!keypad->input_dev) { > + dev_err(&pdev->dev, "Failed to allocate input dev\n"); > + return -ENOMEM; > + } > + > + keypad->input_dev->name = KPD_NAME; > + keypad->input_dev->id.bustype = BUS_HOST; > + > + ret = matrix_keypad_parse_properties(&pdev->dev, &keypad->n_rows, > + &keypad->n_cols); > + if (ret) { > + dev_err(&pdev->dev, "Failed to parse keypad params\n"); > + return ret; > + } > + > + ret = device_property_read_u32(&pdev->dev, "mediatek,debounce-us", > + &debounce); > + if (ret) { > + dev_err(&pdev->dev, "Failed to read mediatek debounce time\n"); > + return ret; > + } Nit, I would make it optional and use a default if no value is specified. > + > + if (debounce > KPD_DEBOUNCE_MAX_US) { > + dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time 256ms\n"); > + return -EINVAL; > + } > + > + keypad->wakeup = device_property_read_bool(&pdev->dev, "wakeup-source"); > + > + dev_dbg(&pdev->dev, "n_row=%d n_col=%d debounce=%d\n", > + keypad->n_rows, keypad->n_cols, debounce); > + > + ret = matrix_keypad_build_keymap(NULL, NULL, > + keypad->n_rows, > + keypad->n_cols, > + NULL, > + keypad->input_dev); Pls align it correctly. > + if (ret) { > + dev_err(&pdev->dev, "Failed to build keymap\n"); > + return ret; > + } > + > + input_set_drvdata(keypad->input_dev, keypad); > + > + regmap_write(keypad->regmap, KP_DEBOUNCE, > + debounce * 32 / 1000 & KPD_DEBOUNCE_MASK); Pls align this also. > + > + keypad->clk = devm_clk_get(&pdev->dev, "kpd"); > + if (IS_ERR(keypad->clk)) { > + return PTR_ERR(keypad->clk); > + } Not needed braces. > + > + ret = clk_prepare_enable(keypad->clk); > + if (ret) { > + dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n"); > + return ret; > + } > + > + devm_add_action_or_reset(&pdev->dev, > + (void (*)(void *))clk_disable_unprepare, > + keypad->clk); Pls don't do that and instead add a internal driver function. > + > + keypad_pinctrl = devm_pinctrl_get(&pdev->dev); > + if (IS_ERR(keypad_pinctrl)) { > + return PTR_ERR(keypad_pinctrl); > + } Not needed braces. > + > + kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default"); > + if (IS_ERR(kpd_default)) { > + dev_err(&pdev->dev, "No default pinctrl state\n"); > + return PTR_ERR(kpd_default); > + } > + > + pinctrl_select_state(keypad_pinctrl, kpd_default); > + > + irqnr = platform_get_irq(pdev, 0); > + if (irqnr < 0) { > + dev_err(&pdev->dev, "Failed to get irq\n"); > + return -irqnr; > + } > + > + ret = devm_request_threaded_irq(&pdev->dev, irqnr, > + NULL, kpd_irq_handler, 0, > + KPD_NAME, keypad); > + if (ret) { > + dev_err(&pdev->dev, "Failed to request IRQ#%d:%d\n", > + irqnr, ret); > + return ret; > + } > + > + ret = input_register_device(keypad->input_dev); > + if (ret) { > + dev_err(&pdev->dev, "Failed to register device\n"); > + return ret; > + } > + > + device_init_wakeup(&pdev->dev, keypad->wakeup); > + > + return 0; > +} > + > +static const struct of_device_id kpd_of_match[] = { > + {.compatible = "mediatek,kp"}, I would also add the specific compatible which you list in the dt-bindings patch. > + {/*sentinel*/} > +}; > + > +static struct platform_driver kpd_pdrv = { > + .probe = kpd_pdrv_probe, > + .driver = { > + .name = KPD_NAME, > + .of_match_table = kpd_of_match, > + }, > +}; > +module_platform_driver(kpd_pdrv); > + > +MODULE_AUTHOR("Mediatek Corporation"); > +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver"); > +MODULE_LICENSE("GPL"); > -- > 2.18.0 Pls use checkpatch the next time, there are several style issues. Also it is quite common to use a vendor prefix for funtions e.g. mtk_kpd_probe() and mtk_kpd_irq_handler() but this is up to you. Regards, Marco ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v7 2/3] drivers: input: keyboard: Add mtk keypad driver [not found] ` <20200514061747.25466-3-fengping.yu@mediatek.com> 2020-05-14 9:24 ` [PATCH v7 2/3] drivers: input: keyboard: Add mtk keypad driver Marco Felsch @ 2020-05-14 10:27 ` Andy Shevchenko 2020-05-14 10:30 ` Andy Shevchenko 1 sibling, 1 reply; 7+ messages in thread From: Andy Shevchenko @ 2020-05-14 10:27 UTC (permalink / raw) To: Fengping Yu Cc: Yingjoe Chen, Dmitry Torokhov, Marco Felsch, linux-arm-kernel, linux-mediatek, linux-kernel On Thu, May 14, 2020 at 02:17:48PM +0800, Fengping Yu wrote: > From: "fengping.yu" <fengping.yu@mediatek.com> > > This adds matrix keypad support for Mediatek SoCs. ... > +config KEYBOARD_MTK_KPD > + tristate "MediaTek Keypad Support" > + depends on OF && HAVE_CLK What makes it OF dependent? > + help > + Say Y here if you want to use the keypad on MediaTek SoCs. > + If unsure, say N. > + To compile this driver as a module, choose M here: the > + module will be called mtk-kpd. ... > +#define KPD_DEBOUNCE_MAX_US 256000 /*256ms */ Comment, besides missed space, is redundant. That's how we use unit suffixes in the definitions. ... > +static const struct regmap_config keypad_regmap_cfg = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = sizeof(u32), > + .max_register = 0x0024, Can it be definition? > +}; ... > + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL); > + if (!keypad) > + return -ENOMEM; + blank line here. > + keypad->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(keypad->base)) > + return PTR_ERR(keypad->base); ... > + if (debounce > KPD_DEBOUNCE_MAX_US) { > + dev_err(&pdev->dev, "Debounce time exceeds the maximum allowed time 256ms\n"); ...%dus\n", KPD_DEBOUNCE_MAX_US); or ...%dms\n", KPD_DEBOUNCE_MAX_US / USEC_PER_MSEC); > + return -EINVAL; > + } ... > + keypad_pinctrl = devm_pinctrl_get(&pdev->dev); > + if (IS_ERR(keypad_pinctrl)) { > + return PTR_ERR(keypad_pinctrl); > + } Extra {}. ... > + kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default"); > + if (IS_ERR(kpd_default)) { > + dev_err(&pdev->dev, "No default pinctrl state\n"); Isn't it done by pin control core? > + return PTR_ERR(kpd_default); > + } > + > + pinctrl_select_state(keypad_pinctrl, kpd_default); And basically entire part is duplicating device core part? (Look at dd.c) ... > + irqnr = platform_get_irq(pdev, 0); > + if (irqnr < 0) { > + dev_err(&pdev->dev, "Failed to get irq\n"); This duplicates what platform core does. > + return -irqnr; - ?! > + } -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v7 2/3] drivers: input: keyboard: Add mtk keypad driver 2020-05-14 10:27 ` Andy Shevchenko @ 2020-05-14 10:30 ` Andy Shevchenko 0 siblings, 0 replies; 7+ messages in thread From: Andy Shevchenko @ 2020-05-14 10:30 UTC (permalink / raw) To: Fengping Yu Cc: Yingjoe Chen, Dmitry Torokhov, Marco Felsch, linux-arm-kernel, linux-mediatek, linux-kernel On Thu, May 14, 2020 at 01:27:01PM +0300, Andy Shevchenko wrote: > On Thu, May 14, 2020 at 02:17:48PM +0800, Fengping Yu wrote: > > From: "fengping.yu" <fengping.yu@mediatek.com> > > > > This adds matrix keypad support for Mediatek SoCs. > > ... > > > +config KEYBOARD_MTK_KPD > > + tristate "MediaTek Keypad Support" > > > + depends on OF && HAVE_CLK > > What makes it OF dependent? Actually you missed regmap dependencies or selection. I dunno which one should be used (IIRC selection). > > + help > > + Say Y here if you want to use the keypad on MediaTek SoCs. > > + If unsure, say N. > > + To compile this driver as a module, choose M here: the > > + module will be called mtk-kpd. -- With Best Regards, Andy Shevchenko ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <20200514061747.25466-2-fengping.yu@mediatek.com>]
* Re: [PATCH v7 1/3] dt-bindings: Add keypad devicetree documentation [not found] ` <20200514061747.25466-2-fengping.yu@mediatek.com> @ 2020-05-14 9:31 ` Marco Felsch 2020-05-14 10:04 ` Matthias Brugger 1 sibling, 0 replies; 7+ messages in thread From: Marco Felsch @ 2020-05-14 9:31 UTC (permalink / raw) To: Fengping Yu Cc: Yingjoe Chen, Dmitry Torokhov, Andy Shevchenko, linux-arm-kernel, linux-mediatek, linux-kernel Hi, On 20-05-14 14:17, Fengping Yu wrote: > From: "fengping.yu" <fengping.yu@mediatek.com> > > Add Mediatek matrix keypad dt-binding doc as yaml schema. > > Signed-off-by: fengping.yu <fengping.yu@mediatek.com> > --- > .../devicetree/bindings/input/mtk-kpd.yaml | 102 ++++++++++++++++++ > 1 file changed, 102 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml > > diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.yaml b/Documentation/devicetree/bindings/input/mtk-kpd.yaml > new file mode 100644 > index 000000000000..8f594fe0bfc2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/mtk-kpd.yaml > @@ -0,0 +1,102 @@ > +%YAML 1.2 > +--- > +version: 1 > + > +$id: http://devicetree.org/schemas/input/mtk-keypad.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek's Keypad Controller device tree bindings > + > +maintainer: > + - Fengping Yu <fengping.yu@mediatek.com> > + > +description: | > + Mediatek's Keypad controller is used to interface a SoC with a matrix-type > + keypad device. The keypad controller supports multiple row and column lines. > + A key can be placed at each intersection of a unique row and a unique column. > + The keypad controller can sense a key-press and key-release and report the > + event using a interrupt to the cpu. > + > +properties: > + compatible: > + constraint: | enum or const ? > + "mediatek,mt6779-keypad" > + "mediatek, kp" > + > + clock-names: > + description: Names of the clocks listed in clocks property in the same order > + > + clocks: > + description: Must contain one entry, for the module clock > + refs: devicetree/bindings/clocks/clock-bindings.txt for details. > + > + interrupts: > + description: A single interrupt specifier > + > + linux,keymap: > + description: The keymap for keys as described in the binding document > + refs: devicetree/bindings/input/matrix-keymap.txt > + > + pinctrl-0: > + description: Specify pin control groups used for this controller > + refs: devicetree/bindings/pinctrl/pinctrl-bindings.txt > + > + pinctrl-names: > + description: Names for optional pin modes > + > + reg: > + description: The base address of the Keypad register bank > + > + wakeup-source: > + description: use any event on keypad as wakeup event > + > + keypad,num-columns: > + description: Number of column lines connected to the keypad controller, > + it is not equal to PCB columns number, instead you should add required value > + for each IC > + > + keypad,num-rows: > + description: Number of row lines connected to the keypad controller, it is > + not equal to PCB rows number, instead you should add required value for each IC > + > + mediatek,debounce-us: > + description: Debounce interval in microseconds > + maximum: 256000 I think that you are missing the maxItems on all your properties so we can't make any validation. Also the indent looks wrong. > + > + > +required: > + - compatible > + - reg > + - interrupts > + - mediatek,debounce-us > + - keypad,num-rows > + - keypad,num-columns > + - linux,keymap > + - pinctrl > + - clocks > + - clock-names > + > +optional: > + - wakeup-source: I think the optional can be dropped. > +examples: > + - | > + > + keypad: kp@10010000 { > + compatible = "mediatek,kp"; > + reg = <0 0x10010000 0 0x1000>; > + wakeup-source; > + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>; > + clocks = <&clk26m>; > + clock-names = "kpd"; > + }; > + > + &keypad { > + mediatek,debounce-us = <32000>; > + keypad,num-rows = <8>; > + keypad,num-columns = <9>; > + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN) >; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&kpd_gpios_def_cfg>; > + }; Pls squash those nodes. Regards, Marco > -- > 2.18.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v7 1/3] dt-bindings: Add keypad devicetree documentation [not found] ` <20200514061747.25466-2-fengping.yu@mediatek.com> 2020-05-14 9:31 ` [PATCH v7 1/3] dt-bindings: Add keypad devicetree documentation Marco Felsch @ 2020-05-14 10:04 ` Matthias Brugger 1 sibling, 0 replies; 7+ messages in thread From: Matthias Brugger @ 2020-05-14 10:04 UTC (permalink / raw) To: Fengping Yu, Yingjoe Chen, Dmitry Torokhov, Andy Shevchenko, Marco Felsch Cc: linux-mediatek, linux-kernel, linux-arm-kernel On 14/05/2020 08:17, Fengping Yu wrote: > From: "fengping.yu" <fengping.yu@mediatek.com> > > Add Mediatek matrix keypad dt-binding doc as yaml schema. > > Signed-off-by: fengping.yu <fengping.yu@mediatek.com> > --- > .../devicetree/bindings/input/mtk-kpd.yaml | 102 ++++++++++++++++++ > 1 file changed, 102 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml > > diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.yaml b/Documentation/devicetree/bindings/input/mtk-kpd.yaml > new file mode 100644 > index 000000000000..8f594fe0bfc2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/mtk-kpd.yaml > @@ -0,0 +1,102 @@ > +%YAML 1.2 > +--- > +version: 1 > + > +$id: http://devicetree.org/schemas/input/mtk-keypad.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek's Keypad Controller device tree bindings > + > +maintainer: > + - Fengping Yu <fengping.yu@mediatek.com> > + > +description: | > + Mediatek's Keypad controller is used to interface a SoC with a matrix-type > + keypad device. The keypad controller supports multiple row and column lines. > + A key can be placed at each intersection of a unique row and a unique column. > + The keypad controller can sense a key-press and key-release and report the > + event using a interrupt to the cpu. > + > +properties: > + compatible: > + constraint: | > + "mediatek,mt6779-keypad" > + "mediatek, kp" "mediatek, kp" is too generic. Are you aware that the keypad can be used by other SoCs. Then we should add them later with a fallback to mt6779-keypad. Regards, Matthias > + > + clock-names: > + description: Names of the clocks listed in clocks property in the same order > + > + clocks: > + description: Must contain one entry, for the module clock > + refs: devicetree/bindings/clocks/clock-bindings.txt for details. > + > + interrupts: > + description: A single interrupt specifier > + > + linux,keymap: > + description: The keymap for keys as described in the binding document > + refs: devicetree/bindings/input/matrix-keymap.txt > + > + pinctrl-0: > + description: Specify pin control groups used for this controller > + refs: devicetree/bindings/pinctrl/pinctrl-bindings.txt > + > + pinctrl-names: > + description: Names for optional pin modes > + > + reg: > + description: The base address of the Keypad register bank > + > + wakeup-source: > + description: use any event on keypad as wakeup event > + > + keypad,num-columns: > + description: Number of column lines connected to the keypad controller, > + it is not equal to PCB columns number, instead you should add required value > + for each IC > + > + keypad,num-rows: > + description: Number of row lines connected to the keypad controller, it is > + not equal to PCB rows number, instead you should add required value for each IC > + > + mediatek,debounce-us: > + description: Debounce interval in microseconds > + maximum: 256000 > + > + > +required: > + - compatible > + - reg > + - interrupts > + - mediatek,debounce-us > + - keypad,num-rows > + - keypad,num-columns > + - linux,keymap > + - pinctrl > + - clocks > + - clock-names > + > +optional: > + - wakeup-source: > + > +examples: > + - | > + > + keypad: kp@10010000 { > + compatible = "mediatek,kp"; > + reg = <0 0x10010000 0 0x1000>; > + wakeup-source; > + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>; > + clocks = <&clk26m>; > + clock-names = "kpd"; > + }; > + > + &keypad { > + mediatek,debounce-us = <32000>; > + keypad,num-rows = <8>; > + keypad,num-columns = <9>; > + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN) >; > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&kpd_gpios_def_cfg>; > + }; > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-05-14 10:30 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-05-14 6:17 [PATCH v7] Add matrix keypad driver support for Mediatek SoCs Fengping Yu [not found] ` <20200514061747.25466-4-fengping.yu@mediatek.com> 2020-05-14 8:56 ` [PATCH v7 3/3] configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=y Marco Felsch [not found] ` <20200514061747.25466-3-fengping.yu@mediatek.com> 2020-05-14 9:24 ` [PATCH v7 2/3] drivers: input: keyboard: Add mtk keypad driver Marco Felsch 2020-05-14 10:27 ` Andy Shevchenko 2020-05-14 10:30 ` Andy Shevchenko [not found] ` <20200514061747.25466-2-fengping.yu@mediatek.com> 2020-05-14 9:31 ` [PATCH v7 1/3] dt-bindings: Add keypad devicetree documentation Marco Felsch 2020-05-14 10:04 ` Matthias Brugger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).