linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ira Weiny <ira.weiny@intel.com>
To: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-ext4@vger.kernel.org,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	"Theodore Y. Ts'o" <tytso@mit.edu>, Jan Kara <jack@suse.cz>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Chinner <david@fromorbit.com>,
	Christoph Hellwig <hch@lst.de>, Jeff Moyer <jmoyer@redhat.com>,
	linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V1 7/9] fs/ext4: Make DAX mount option a tri-state
Date: Thu, 14 May 2020 20:38:58 -0700	[thread overview]
Message-ID: <20200515033858.GE2140786@iweiny-DESK2.sc.intel.com> (raw)
In-Reply-To: <20200514150839.GB2077014@magnolia>

On Thu, May 14, 2020 at 08:08:39AM -0700, Darrick J. Wong wrote:
> On Wed, May 13, 2020 at 11:53:13PM -0700, ira.weiny@intel.com wrote:
> > From: Ira Weiny <ira.weiny@intel.com>
> > 
> > We add 'always', 'never', and 'inode' (default).  '-o dax' continue to
> > operate the same.
> > 
> > Specifically we introduce a 2nd DAX mount flag EXT4_MOUNT2_DAX_NEVER and set
> > it and EXT4_MOUNT_DAX_ALWAYS appropriately.
> > 
> > We also force EXT4_MOUNT2_DAX_NEVER if !CONFIG_FS_DAX.
> > 
> > https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
> > 
> > Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> > 
> > ---
> > Changes from RFC:
> > 	Combine remount check for DAX_NEVER with DAX_ALWAYS
> > 	Update ext4_should_enable_dax()
> > ---
> >  fs/ext4/ext4.h  |  1 +
> >  fs/ext4/inode.c |  2 ++
> >  fs/ext4/super.c | 43 +++++++++++++++++++++++++++++++++++++------
> >  3 files changed, 40 insertions(+), 6 deletions(-)
> > 
> > diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
> > index 86a0994332ce..01d1de838896 100644
> > --- a/fs/ext4/ext4.h
> > +++ b/fs/ext4/ext4.h
> > @@ -1168,6 +1168,7 @@ struct ext4_inode_info {
> >  						      blocks */
> >  #define EXT4_MOUNT2_HURD_COMPAT		0x00000004 /* Support HURD-castrated
> >  						      file systems */
> > +#define EXT4_MOUNT2_DAX_NEVER		0x00000008 /* Do not allow Direct Access */
> >  
> >  #define EXT4_MOUNT2_EXPLICIT_JOURNAL_CHECKSUM	0x00000008 /* User explicitly
> >  						specified journal checksum */
> > diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> > index 23e42a223235..140b1930e2f4 100644
> > --- a/fs/ext4/inode.c
> > +++ b/fs/ext4/inode.c
> > @@ -4400,6 +4400,8 @@ int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
> >  
> >  static bool ext4_should_enable_dax(struct inode *inode)
> >  {
> > +	if (test_opt2(inode->i_sb, DAX_NEVER))
> > +		return false;
> >  	if (!S_ISREG(inode->i_mode))
> >  		return false;
> >  	if (ext4_should_journal_data(inode))
> > diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> > index 5ec900fdf73c..e01a040a58a9 100644
> > --- a/fs/ext4/super.c
> > +++ b/fs/ext4/super.c
> > @@ -1505,6 +1505,7 @@ enum {
> >  	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
> >  	Opt_noquota, Opt_barrier, Opt_nobarrier, Opt_err,
> >  	Opt_usrquota, Opt_grpquota, Opt_prjquota, Opt_i_version, Opt_dax,
> > +	Opt_dax_str,
> >  	Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_warn_on_error,
> >  	Opt_nowarn_on_error, Opt_mblk_io_submit,
> >  	Opt_lazytime, Opt_nolazytime, Opt_debug_want_extra_isize,
> > @@ -1570,6 +1571,7 @@ static const match_table_t tokens = {
> >  	{Opt_barrier, "barrier"},
> >  	{Opt_nobarrier, "nobarrier"},
> >  	{Opt_i_version, "i_version"},
> > +	{Opt_dax_str, "dax=%s"},
> >  	{Opt_dax, "dax"},
> >  	{Opt_stripe, "stripe=%u"},
> >  	{Opt_delalloc, "delalloc"},
> > @@ -1767,6 +1769,7 @@ static const struct mount_opts {
> >  	{Opt_min_batch_time, 0, MOPT_GTE0},
> >  	{Opt_inode_readahead_blks, 0, MOPT_GTE0},
> >  	{Opt_init_itable, 0, MOPT_GTE0},
> > +	{Opt_dax_str, 0, MOPT_STRING},
> >  	{Opt_dax, EXT4_MOUNT_DAX_ALWAYS, MOPT_SET},
> >  	{Opt_stripe, 0, MOPT_GTE0},
> >  	{Opt_resuid, 0, MOPT_GTE0},
> > @@ -2076,13 +2079,32 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token,
> >  		}
> >  		sbi->s_jquota_fmt = m->mount_opt;
> >  #endif
> > -	} else if (token == Opt_dax) {
> > +	} else if (token == Opt_dax || token == Opt_dax_str) {
> >  #ifdef CONFIG_FS_DAX
> > -		ext4_msg(sb, KERN_WARNING,
> > -		"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
> > -		sbi->s_mount_opt |= m->mount_opt;
> > +		char *tmp = match_strdup(&args[0]);
> > +
> > +		if (!tmp || !strcmp(tmp, "always")) {
> > +			ext4_msg(sb, KERN_WARNING,
> > +				"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
> > +			sbi->s_mount_opt |= EXT4_MOUNT_DAX_ALWAYS;
> > +			sbi->s_mount_opt2 &= ~EXT4_MOUNT2_DAX_NEVER;
> > +		} else if (!strcmp(tmp, "never")) {
> > +			sbi->s_mount_opt2 |= EXT4_MOUNT2_DAX_NEVER;
> > +			sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> > +		} else if (!strcmp(tmp, "inode")) {
> > +			sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> > +			sbi->s_mount_opt2 &= ~EXT4_MOUNT2_DAX_NEVER;
> > +		} else {
> > +			ext4_msg(sb, KERN_WARNING, "DAX invalid option.");
> > +			kfree(tmp);
> > +			return -1;
> > +		}
> > +
> > +		kfree(tmp);
> >  #else
> >  		ext4_msg(sb, KERN_INFO, "dax option not supported");
> > +		sbi->s_mount_opt2 |= EXT4_MOUNT2_DAX_NEVER;
> > +		sbi->s_mount_opt &= ~EXT4_MOUNT_DAX_ALWAYS;
> >  		return -1;
> >  #endif
> >  	} else if (token == Opt_data_err_abort) {
> > @@ -2306,6 +2328,13 @@ static int _ext4_show_options(struct seq_file *seq, struct super_block *sb,
> >  	if (DUMMY_ENCRYPTION_ENABLED(sbi))
> >  		SEQ_OPTS_PUTS("test_dummy_encryption");
> >  
> > +	if (test_opt2(sb, DAX_NEVER))
> > +		SEQ_OPTS_PUTS("dax=never");
> > +	else if (test_opt(sb, DAX_ALWAYS))
> > +		SEQ_OPTS_PUTS("dax=always");
> > +	else
> > +		SEQ_OPTS_PUTS("dax=inode");
> 
> dax=inode is the default; do you need to show it?
> 
> (Especially since xfs doesn't...)

I'll only show it if -o dax or -o dax=inode was actually specified per earlier
comments regarding ext4 behavior.

Ira

> 
> --D
> 
> > +
> >  	ext4_show_quota_options(seq, sb);
> >  	return 0;
> >  }
> > @@ -5425,10 +5454,12 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
> >  		goto restore_opts;
> >  	}
> >  
> > -	if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX_ALWAYS) {
> > +	if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX_ALWAYS ||
> > +	    (sbi->s_mount_opt2 ^ old_opts.s_mount_opt2) & EXT4_MOUNT2_DAX_NEVER) {
> >  		ext4_msg(sb, KERN_WARNING, "warning: refusing change of "
> > -			"dax flag with busy inodes while remounting");
> > +			"dax mount option with busy inodes while remounting");
> >  		sbi->s_mount_opt ^= EXT4_MOUNT_DAX_ALWAYS;
> > +		sbi->s_mount_opt2 ^= EXT4_MOUNT2_DAX_NEVER;
> >  	}
> >  
> >  	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
> > -- 
> > 2.25.1
> > 

  reply	other threads:[~2020-05-15  3:39 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14  6:53 [PATCH V1 0/9] Enable ext4 support for per-file/directory DAX operations ira.weiny
2020-05-14  6:53 ` [PATCH V1 1/9] fs/ext4: Narrow scope of DAX check in setflags ira.weiny
2020-05-14  6:53 ` [PATCH V1 2/9] fs/ext4: Disallow verity if inode is DAX ira.weiny
2020-05-14 10:21   ` Jan Kara
2020-05-14  6:53 ` [PATCH V1 3/9] fs/ext4: Disallow encryption " ira.weiny
2020-05-14 10:23   ` Jan Kara
2020-05-14  6:53 ` [PATCH V1 4/9] fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS ira.weiny
2020-05-14  6:53 ` [PATCH V1 5/9] fs/ext4: Update ext4_should_use_dax() ira.weiny
2020-05-14  6:53 ` [PATCH V1 6/9] fs/ext4: Only change S_DAX on inode load ira.weiny
2020-05-14  6:53 ` [PATCH V1 7/9] fs/ext4: Make DAX mount option a tri-state ira.weiny
2020-05-14 11:25   ` Jan Kara
2020-05-14 14:27     ` Ira Weiny
2020-05-14 15:08   ` Darrick J. Wong
2020-05-15  3:38     ` Ira Weiny [this message]
2020-05-14  6:53 ` [PATCH V1 8/9] fs/ext4: Introduce DAX inode flag ira.weiny
2020-05-14 11:06   ` Jan Kara
2020-05-14  6:53 ` [PATCH V1 9/9] Documentation/dax: Update DAX enablement for ext4 ira.weiny
2020-05-14 11:15   ` Jan Kara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515033858.GE2140786@iweiny-DESK2.sc.intel.com \
    --to=ira.weiny@intel.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=dan.j.williams@intel.com \
    --cc=darrick.wong@oracle.com \
    --cc=david@fromorbit.com \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=jmoyer@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).